Hi need a vi to communicate with a usb connecting to 4 sensors

hello
          i m working with labview 7... and working on sensors(strain gauge type sensors).... my job is to communicate with a usb cable that is connected to those sensors without the help of drivers.. so i need a Vi for that.... and after that i need to physically look at the incoming data on the computer so another Vi for that... pls help me as my deadline is near

hi dennis
yes it uses visa... i m sending u the vi and the sub vi s also....have a look and help me furthere pls... my deadline is till this sunday...i would really appreciate ur help
Attachments:
Reset_Com.vi ‏27 KB
Initialize_Com.vi ‏71 KB
Close_Com.vi ‏22 KB

Similar Messages

  • Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ?

    Can I use the instrument I/O assistant express vi to communicate with a USB connected instrument ? My PC is running Windows 2000 et Labview7 express.
    where can I get information or examples on the assistant and USB communication ?

    Yes you can - the Instrument I/O Assistant communicates with message-based instruments through VISA. VISA 3.0 supports USB instruments and VISA 3.0 is the version of VISA that installs with the Assistant.

  • How to communicate with HID USB device under windows XP with Labview

              I have designed a EZ-USB FX2 device and I need to communicate with LabVIEW. I mean I just want to send and receive data. I don’t know how to achieve this goal.Someone have advised me to design a HID device,then use VISA Driver Development Wizards to generate driver(inf file).SO I defined it to a hid device .However when I connect my hid device to the computer, it will automatically be recognized as HID compliance device. I can’t to install the inf file driver. I wondered whether all HID devices will be acquiescently installed the drivers contained in the windows rather than use the inf file driver generated by VISA Driver Development Wizards? If so，what should I do next to communicate with HID USB device under windows XP with Labview? HOPE TO GET HELP!
              KIVI

    Hi,
    I am working on a project using PIC18F4550 MCU and USB.
    I would need to send and receive data from the MCU thru USB. I have uninstaled the HID and created a new NI-VISA driver for my MCU. this worked fine, and it did showed up in MAX
    Unfortunately I was not able to receive data from the MCU, Just sending!
    I thought to use HID.DLL but the way I need to use the functions inside the HID DLL is simply too much for me, I am not a PC programmer.
    There is any kind of VI that is able to use HID.DLL to comunicate with external devices conected to PC thru USB?
    Please Help
    Andrei

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • I want to transfer music from my MacBook to my Imac. Do I need a cord with double USB connections? Pro to my Imac

    I want to transfer music from my MacBook to my Imac.  Do I need a cord with double USB connections?

    How about a USB flash drive? How about burning a CD or DVD?

  • I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac, editing in imovie and burning on idvd. The picture quality is awful. What can I do?????

    I am attempting to convert 8mm video cassettes to dvd using a video cassette player, elgato video capture with rca/usb connections to the mac then editing in imovie and burning dvd-r using idvd. The picture quality is awful. What can I do??????

    At what point is the video quality bad?  Is it bad on capture?  I would recommend using an s-video 1394 firewire converter instead.  They capture the video at a higher bit rate.  If you have a lot of 8mm tapes to capture, invest in a stand alone DVD recorder.  They capture and compress in one shot.  If you need to rip it back from the DVD into iMovie again, I would recommend using DVDxDV.

  • Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    Hello, give this a try...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Can charge my iphone 4 with the USB connected to a pc but cannot charge my iphone4 with wall charge

    Why ca I charge my iphone 4 with the USB connected to a pc but cannot charge my iphone 4 with wall charge?

    If it charges when connected to a computer USB, it can't be the phone.  Try a different cable.

  • Communicate with a USB port, DLL in Visual Basic, program in LabVIEW

    Hello !
    I have to write a program in LabVIEW (I'm a novice in this language) to communicate with an interferometer via an USB port. The drivers and DLL for the USB port are written in Visual Basic.
    -I don't know if it's possible to use them just so, or if I need to adapt them to LabVIEW.
    -And how to do to call a particular function of my DLL ?
    Thank you for your answer...
    Gaelle

    Nakaose,
    You should refer to these links:
    Tutorial: Sharing code with VB:
    ==>  http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&5F9B8F1FF859549186256E5C0005457D
    Tutorial: Can LabVIEW C?:
    ==> http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&FD4B480C24A159BD86256E60005B0120
    Best regards,
    JPR
    NIF

  • Why does HBO Go need to buffer during streaming with a wired connection?

    I have Verizon FiOS with 75/35 Mbps speed. When streaming HBO Go with a wired connection programming is intermittently interrupted for buffering; Apple TV is connected to an LG flat screen through a Yamaha receiver via HDMI cabling. I had this issue while streaming wirelessly despite full 5 bar signal strength to Apple TV from the FiOS router.
    Any thoughts? Software is up to date.

    mpk7
    Try rebooting your router.

  • Can't print with airport usb connection only

    i have spent the last 3 days searching for help to fix my problem - PLEASE HELP!!!
    using:
    imac osx 10.6.8
    canon image class mf8350cdn
    airport extreme base station
    I cannot seem to print wirelessly with my imac using just the USB connection on the airport router.  I can print with the printer locally when it's "hardwired" directly to a usb on the back of the imac.  I can print if i connect a cat5 network cable from the printer to the airport. i can print wirelessly with a PC when the printer is connected with a usb to the airport.  i just can't do this with my imac via the usb connection on the router.  my error message is a Canon CMFP Printer Driver telling me printer is not responding - check the power.....try sending again.
    I believe i have tried everything!!!  While i am newer to mac and not the greatest at networking, i have manipulated every setting to match up with all of the online help i can get (trying to not have to send this question!!) and no luck.
    i have deleted printers and jobs, reinstalled everything, i changed the cable, downloaded the latest drivers from canon and apple, i updated the firmware on the printer. i even reinstalled my osx and confirmed all is updated on my imac.
    i don't want to scan or fax this way - so that is not my issue -- it's just plain old printing using that usb port.
    i need all of my other ports on the airport for other things, so i cannot sacrific this one for printing - i just want to use the usb as my printer connection to print with all of the machines i have.
    hope my question makes sense and that someone will take the time to give a reply.
    thanks!!
    p.s. the closest discussion that matches my issue seems to be this one:
    https://discussions.apple.com/message/12367897#12367897
    but, i still can't seem to get there..........

    The most comprehensive set of troubleshooting instructions for printing problems involving Airport printers is found at:
    http://docs.info.apple.com/article.html?artnum=107418
    It is possible your printer simply cannot be made to work in this manner, and is more often than not a problem with multifunction printers.

  • Using windows vista I can not get the install to complete and work properly with a usb connection.

    I am running Vista (32 bit) and I was trying to update to new HP software.  Tried using full software install from file on HP website (release 14.0 full version).  When I try to install, it will not recognize the usb connection of the software.  I tried going back to version that came with the printer and had a similar problem.  Now I am stuck not being able to get either version 12 (which came with the system) or version 14 (new update on website).
    I need help trying to figure out how to get the software to go through and connect properly using usb and having the scan function working.......
    Any ideas.

    Hi,
    Have you tried plugging the USB into a differnt port at the back of your PC?
    IS the USB directly connected to your PC and not through any USB hub or extention?
    Do you see any response while plugging the USB to your computer?
    If yes, please clarify.
    I would also suggest trying a different USB cord, not longer than 2-3 meters long and check for any difference.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Want to use my mac as wifi hotspot with 3G USB connection

    Howdy Folks,
    I'd like to try an alternative to my local internet provider, which has now increased to $240/mo for less than 2mb/sec service. (I live in a remote place with just one provider)
    The local cellular company offers 3G USB internet "sticks", and I would like to see if I can use that to tether my MacBook Pro as a hot spot.
    And, better yet, is there a way to expand that to my Airport Extreme?
    Or, use the USB connection on an Airport Express directly?
    Anyone know a solution(s)?
    I have a small cafe, so the purpose beyond personal use, would be to provide WiFi access for up to about 6 additional users.
    Thanks in advance!

    Ok, thanks. I'm still confused. So I turn Wi-Fi off and I try to select "personal hotspot" under "cellular data" and I get the following message: "wifi is off - personal hotspot will only be available over Bluetooth and USB. Do you also want to enable it over wifi?" Then it gives me two choices 1) Turn on Wifi  or 2) Bluetooth and USB Only. If I choose 1 like I did today the bluebar appears but it's connected over a crappy wifi network...if I choose #2 the blue bar never appears and the ipad isn't a hotspot???

  • Play music in my car with a USB connection

    My car has a USB connection for audio input.  When I connect the car with the USB cable that came with my 8530 to my phone, the radio does not detect that I have connected it. 
    My question is, can I play music through the USB port on my CURVE 8530 and how do I enable this feature if I do have it.
    PS. This is my first smart phone, and I love my CURVE to death.

    I'm pretty sure you can't do this. The only way for this to work is if your car has an AUX wire input. Most newer cars do have this.
    Anthony
    Did i help you with this problem? if so please show your appreciation by clicking the Like button inside of my post. Please remember I am not a RIM employee the support forums are user-to-user, not user-to-RIM.

  • Problem with the USB-connection after upgrade to P...

    Hello to everybody!
    After upgrading PC-suite, I can't establish a USB-connection with the phone.
    Here are the facts:
    1) My phone is the E90. Latest software installed (300.34.84)
    2) PC-Suite version 7.0.9.2 english. I also tried the greek version, same problem with it also.
    3) Nokia Connectivity Cable Driver 7.0.2.1. I also installed manually a previous version of the driver (7.0.2.0), but this didn't solve the problem.
    4) I didn't have any problem with the older version of PC-suite.
    5) I don't have a problem with the cable because the data-transfer-mode works fine.
    6) Prior to any installation attempt, I always first uninstalled PC-suite and Cable-driver manually with the windows-xp uninstall program. This was not the fact, only in my first attempt, where I upgraded the pc-suite from inside the program itself.
    Please help, because I can't backup and this is very important for me!
    Solved!
    Go to Solution.

    Thank you all for your suggestions but nothing of the above worked for me.
    After of hours and hours of installing and uninstalling of several versions of the pc-suite I solved the problem as following:
    1) Uninstall manually (windows - control panel - add/remove programs)Nokia-PC-Suite, Nokia Connectivity Cable Driver AND PC Connectivity Solution!
    2) Restart PC
    3) Download and install the new version of Nokia-PC-Suite.
    The tricky part is that you have to uninstall the application called "PC Connectivity Solution" manually and since the title of the application dosn't include the Nokia-Name you have first to find out that this program is Nokia-related!
    Once again, thanks to everybody who took the time to make suggestions and especially to cricfancy who made me aware of the fact that PC Connectivity Solution is a nokia application!
    Finally, I would like to make a statement for Nokia:
    People, if you are not sure about an update then keep it in beta and don't make it available to the public!!! I lost hours and hours on search and made countless installs and uninstalls to find out what was wrong. Under the line, I had made no mistakes in my update from the start and the whole problem was based on your software! This is not acceptable!

Maybe you are looking for