Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

Similar Messages

Since upgrading to iOS 7.1.1 i am unable to take any videos with my iPad - Only still photos

Since the upgrade, In camera mode, I am unable to select video option and can only take stills (photos) - why?

Are you sliding the screen down to change to video ?

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

Need help about boot SUNFIRE V120

Hi all....
I need help about how to change boot from boot net to boot disk....
after i installed sun solaris 10 at my sunfire v120, then reboot the machine ... this sunfire still boot from net not from disk...
can i change it?
please i really need help ....
thanks

If its booted, try "eeprom boot-device=disk"
If your at the OBP, "setenv boot-device disk".
If that doesnt work check the value of "diag-switch?".
It could be booting off the the diag-device instead

I need help unlocking my iphone 4, i upgrade to ios 5 and got stuck on bb 04.11.08

i need help unlocking my iphone 4, i upgrade to ios 5 and got stuck on bb 04.11.08

Only AT&T can legitimately ulock you iPhone and they won't for any reason. Any talk about unauthorized unlocking of an iPhone forbidden in this forum.

Need help about ref cursor using like table

Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advance

My understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks

Need Help about 3D and revolving in illustrator

I really need help about 3D, Please tell me that How i create 3D in illustrator
i want to revolve text or shape around any object like this, any plugin? or other software required for this?
if somebody know this it will be really help full
   http://rcgrafix.fizwig.com/1452732-large.jpg
   http://rcgrafix.fizwig.com/1384370-large.jpg
   http://rcgrafix.fizwig.com/1062180-large.jpg
Thanks
Arsi

if links are not working try Copy and paste it in to your browser address bar
thank you

Need help about 1015

need help about 1015 it says connect iphone to itunes on screen i did it but it doesnt work and says unexpected 1015

Try restoring it: Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
If you have backed up the iPhone in the past, select the device in iTunes and choose "restore from backup".

Need help on transportable tablespace, after convert and move datafile over

I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
And How do I start the database ? what controlfile I should use?
Thanks.

I got error like this:
RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
Starting backup at 29-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/29/2012 17:46:21
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
How to deal with this?
I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

HT1338 I AM HAVING SO MANY PROBLE TRYING TO DOWNLOAD Mac OS X version 10.7.5 TO MY MACBOOK, I NEED HELP, I HAVE ALREADY PURCHASE THIS PRODUCT OVER A MONTH AGO

I AM HAVING SO MANY PROBLEMS TRYING TO DOWNLOAD Mac OS X version 10.7.5 TO MY MACBOOK, I NEED HELP, I HAVE ALREADY PURCHASE THIS PRODUCT OVER A MONTH AGO

lkimmie wrote:
I AM HAVING SO MANY PROBLEMS TRYING TO DOWNLOAD Mac OS X version 10.7.5 TO MY MACBOOK, I NEED HELP, I HAVE ALREADY PURCHASE THIS PRODUCT OVER A MONTH AGO
Firstly, please turn off your Caps lock. It is considered shouting in forums.
Secondly, please explain your exact issue and wheteher or not you can see your purchase in the App Store and if you are using the same Apple ID to reinstall it with as you used to purcase it with.
Thanks
Pete

Need help about the SHA Message Digest ? & what is use of Message Diagest ?

need help about the SHA Message Digest ? & what is use of Message Diagest ?
1>i have one program of making message digest
2>which requires two files name
3>one for input like txt
4> second is out put file of message digest
can any one tell what is the use of second generated file .

MessageDigest md = MessageDigest.getInstance("SHA");
FileInputStream fis = new FileInputStream(args[0]);
byte[] b = new byte[1024];
int readed = -1;
while((readed = fis.read(b)) > 0)
     md.update(b, 0, readed);
fis.close();
FileOutputStream fos = new FileOutputStream(args[1]);
byte[] d = md.digest();
StringBuffer sb = new StringBuffer();
for(int i = 0; i < d.length; i++) {
     String str = Integer.toHexString(d[i] & 0xff);
     sb.append(str.length() < 2 ? "0" + str : str);
fos.write(sb.toString().getBytes());
fos.close();

TS4062 Can not look at any videos on my iPad after I did the last upgrade how can I fix this

Can not look at any videos on my iPad after I did the last upgrade how can I fix this

Why not? What happens when you try?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Similar Messages

Maybe you are looking for