Hi need help to connect to my redhat on vmware with host win xp ... plzzzzz

hello,
i have setup my oracle 11.5.10 in redhat4 linux on vmware with win xp sp2 as my host OS
so not able to open the oracle applications manager from windows xp browser
i have given a loopback adapter for wixn xp with
ip 192.168.0.22
and gateway and dns as 192.168.0.11 ---- this is also the ip of the redhat linux on vmware
also i have give default gateway for the redhat linux as 192.168.0.22 -- i mean the loop back ip address
i able to ping to the 192.168.0.22 and 192.168.0.11 from the win command prompt
and from linux i ping to the loopback adapter it is not pinging
also one more observation
my oracle apps web address
is
http://shiva.hyd.com:8001 it is opening the home page and not opening the further login pages for OAM and EBS , but when i give the address
as http://192.168.0.11:8001 then it will open even the login page but will not log in to OAM or EBS
plz help
shiva

hi Helios,
thank you very much i have done with it ..... i have one more for you.
not able to open the form based web pages with my browser ...
1-- mozilla fire fox -it asks for additional plugins but when i try to download it will not install "no suitable update avilable"
2--so i updated my IE6 to IE8 and when trying to open the EBS and fine till the logins and all but when i try to access the forms based pages it prompts for the downloading a activex for oracle jinitator and then it downloads and installs jinitator for netscape navigator. i just installed it and when try to open form based applications IE8 will frezee the system completely ...
plz help

Similar Messages

TS1398 I need help getting connected to our home wifi.

I need help getting connected to our home wifi. I've reset network settings, iPhone, and router but the error "unable to join network" keeps coming up. I also double checked the password. Please help

Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it.

Need help to connect to aws instance from my macbook pro

i need help to connect to an aws instance from my laptop. Please help me..

No, it's not Apple's doing.
You are infected with Downlite, which is preventing you from accessing the AdwareMedic site. For an explanation and some solutions, see:
http://www.thesafemac.com/adware-blocking-adwaremedic-downloads/
If the adware prevents you from loading that page as well, try this one:
https://discussions.apple.com/docs/DOC-7792
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Needs help to know the different versions of forms with their compatibility

Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
Kindly give the details or any suitable link for the same.
please consider it as on urgent basis.
regards,
rajesh

Rajesh,
the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
Frank

HT2480 I need help syncing my computer outlook email (through Yahoo) with my Iphone. when I delete an email on my computer is it still in my inbox on my phone. Any help is appreciated.

I need help syncing my computer outlook email (through Yahoo) with my iphone. When I delete an email on my computer it is still in my inbox on my phone. Please help.

Your computer is probably set up to access your Yahoo mail using POP3. POP3 does not synchronize with the server. For full synchronization, you will need to use IMAP instead. See the Yahoo mail help pages for instructions on how to configure your mail client.

Need Help for connectivity USB Cable Nokia 5800 ca...

Hi All,
I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody?

When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode. Does this happen?
Ravi

Need help to connect from MacBook Air to a Dell 1610HD projector.

I need to mirror the display on my MacBook Air to a projector, I've gone to the System Preferences and it detects my Apple TV but not the Projector need help.

I have tried and I have the partition, but when I try to reinstall Mac OS X then it says that there is a mistake try to reinstall Mac OS X again, then I try to reinstall it again but with no luck, the same problem keeps up coming

Need help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 8.2(1)

Need urgent help in configuring Client to Site IPSec VPN with Hairpinning on Cisco ASA5510 - 8.2(1).
The following is the Layout:
There are two Leased Lines for Internet access - 1.1.1.1 & 2.2.2.2, the latter being the Standard Default route, the former one is for backup.
I have been able to configure Client to Site IPSec VPN
1) With access from Outside to only the Internal Network (172.16.0.0/24) behind the asa
2) With Split tunnel with simultaneous assess to internal LAN and Outside Internet.
But I have not been able to make tradiotional Hairpinng model work in this scenario.
I followed every possible sugestions made in this regard in many Discussion Topics but still no luck. Can someone please help me out here???
Following is the Running-Conf with Normal Client to Site IPSec VPN configured with No internat Access:
LIMITATION: Can't Boot into any other ios image for some unavoidable reason, must use 8.2(1)
running-conf --- Working normal Client to Site VPN without internet access/split tunnel
ASA Version 8.2(1)
hostname ciscoasa
domain-name cisco.campus.com
enable password xxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxx encrypted
names
interface GigabitEthernet0/0
nameif internet1-outside
security-level 0
ip address 1.1.1.1 255.255.255.240
interface GigabitEthernet0/1
nameif internet2-outside
security-level 0
ip address 2.2.2.2 255.255.255.224
interface GigabitEthernet0/2
nameif dmz-interface
security-level 0
ip address 10.0.1.1 255.255.255.0
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
ip address 172.16.0.1 255.255.0.0
interface Management0/0
nameif CSC-MGMT
security-level 100
ip address 10.0.0.4 255.255.255.0
boot system disk0:/asa821-k8.bin
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name cisco.campus.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network cmps-lan
object-group network csc-ip
object-group network www-inside
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
object-group service udp-port
object-group service ftp
object-group service ftp-data
object-group network csc1-ip
object-group service all-tcp-udp
access-list INTERNET1-IN extended permit ip host 1.2.2.2 host 2.2.2.3
access-list CSC-OUT extended permit ip host 10.0.0.5 any
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq www
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq https
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ssh
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq ftp
access-list CAMPUS-LAN extended permit udp 172.16.0.0 255.255.0.0 any eq domain
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq smtp
access-list CAMPUS-LAN extended permit tcp 172.16.0.0 255.255.0.0 any eq pop3
access-list CAMPUS-LAN extended permit ip any any
access-list csc-acl remark scan web and mail traffic
access-list csc-acl extended permit tcp any any eq smtp
access-list csc-acl extended permit tcp any any eq pop3
access-list csc-acl remark scan web and mail traffic
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 993
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq imap4
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq 465
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq www
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq https
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq smtp
access-list INTERNET2-IN extended permit tcp any host 1.1.1.2 eq pop3
access-list INTERNET2-IN extended permit ip any host 1.1.1.2
access-list nonat extended permit ip 172.16.0.0 255.255.0.0 172.16.0.0 255.255.0.0
access-list DNS-inspect extended permit tcp any any eq domain
access-list DNS-inspect extended permit udp any any eq domain
access-list capin extended permit ip host 172.16.1.234 any
access-list capin extended permit ip host 172.16.1.52 any
access-list capin extended permit ip any host 172.16.1.52
access-list capin extended permit ip host 172.16.0.82 host 172.16.0.61
access-list capin extended permit ip host 172.16.0.61 host 172.16.0.82
access-list capout extended permit ip host 2.2.2.2 any
access-list capout extended permit ip any host 2.2.2.2
access-list campus-lan_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu internet1-outside 1500
mtu internet2-outside 1500
mtu dmz-interface 1500
mtu campus-lan 1500
mtu CSC-MGMT 1500
ip local pool vpnpool1 192.168.150.2-192.168.150.250 mask 255.255.255.0
ip verify reverse-path interface internet2-outside
ip verify reverse-path interface dmz-interface
ip verify reverse-path interface campus-lan
ip verify reverse-path interface CSC-MGMT
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (internet1-outside) 1 interface
global (internet2-outside) 1 interface
nat (campus-lan) 0 access-list campus-lan_nat0_outbound
nat (campus-lan) 1 0.0.0.0 0.0.0.0
nat (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT,internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
access-group INTERNET2-IN in interface internet1-outside
access-group INTERNET1-IN in interface internet2-outside
access-group CAMPUS-LAN in interface campus-lan
access-group CSC-OUT in interface CSC-MGMT
route internet2-outside 0.0.0.0 0.0.0.0 2.2.2.5 1
route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
http 1.2.2.2 255.255.255.255 internet2-outside
http 1.2.2.2 255.255.255.255 internet1-outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet2-outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map internet2-outside_map interface internet2-outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
        a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
    a67a897as a67a897as a67a897as a67a897as a67a897as
quit
crypto isakmp enable internet2-outside
crypto isakmp policy 10
authentication pre-share
encryption aes
hash md5
group 2
lifetime 86400
telnet 10.0.0.2 255.255.255.255 CSC-MGMT
telnet 10.0.0.8 255.255.255.255 CSC-MGMT
telnet timeout 5
ssh 1.2.3.3 255.255.255.240 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet1-outside
ssh 1.2.2.2 255.255.255.255 internet2-outside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy VPN_TG_1 internal
group-policy VPN_TG_1 attributes
vpn-tunnel-protocol IPSec
username ssochelpdesk password xxxxxxxxxxxxxx encrypted privilege 15
username administrator password xxxxxxxxxxxxxx encrypted privilege 15
username vpnuser1 password xxxxxxxxxxxxxx encrypted privilege 0
username vpnuser1 attributes
vpn-group-policy VPN_TG_1
tunnel-group VPN_TG_1 type remote-access
tunnel-group VPN_TG_1 general-attributes
address-pool vpnpool1
default-group-policy VPN_TG_1
tunnel-group VPN_TG_1 ipsec-attributes
pre-shared-key *
class-map cmap-DNS
match access-list DNS-inspect
class-map csc-class
match access-list csc-acl
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class csc-class
csc fail-open
class cmap-DNS
inspect dns preset_dns_map
service-policy global_policy global
prompt hostname context
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Neither Adding dynamic NAT for 192.168.150.0/24 on outside interface works, nor does the sysopt connection permit-vpn works
Please tell what needs to be done here, to hairpin all the traffic to internet comming from VPN Clients.
That is I need clients conected via VPN tunnel, when connected to internet, should have their IP's NAT'ted against the internet2-outside interface address 2.2.2.2, as it happens for the Campus Clients (172.16.0.0/16)
I'm not much conversant with everything involved in here, therefore please be elaborative in your replies. Please let me know if you need any more information regarding this setup to answer my query.
Thanks & Regards
maxs

Hi Jouni,
Thanks again for your help, got it working. Actually the problem was ASA needed some time after configuring to work properly ( ?????? ). I configured and tested several times within a short period, during the day and was not working initially, GUI packet tracer was showing some problems (IPSEC Spoof detected) and also there was this left out dns. Its working fine now.
But my problem is not solved fully here.
Does hairpinning model allow access to the campus LAN behind ASA also?. Coz the setup is working now as i needed, and I can access Internet with the NAT'ed ip address (outside-interface). So far so good. But now I cannot access the Campus LAN behind the asa.
Here the packet tracer output for the traffic:
packet-tracer output
asa# packet-tracer input internet2-outside tcp 192.168.150.1 56482 172.16.1.249 22
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
MAC Access list
Phase: 2
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 3
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   172.16.0.0      255.255.0.0     campus-lan
Phase: 4
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in   192.168.150.1   255.255.255.255 internet2-outside
Phase: 5
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group internnet1-in in interface internet2-outside
access-list internnet1-in extended permit ip 192.168.150.0 255.255.255.0 any
Additional Information:
Phase: 6
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 7
Type: CP-PUNT
Subtype:
Result: ALLOW
Config:
Additional Information:
Phase: 8
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional Information:
Phase: 9
Type: NAT-EXEMPT
Subtype: rpf-check
Result: ALLOW
Config:
Additional Information:
Phase: 10
Type: NAT
Subtype:
Result: DROP
Config:
nat (internet2-outside) 1 192.168.150.0 255.255.255.0
match ip internet2-outside 192.168.150.0 255.255.255.0 campus-lan any
    dynamic translation to pool 1 (No matching global)
    translate_hits = 14, untranslate_hits = 0
Additional Information:
Result:
input-interface: internet2-outside
input-status: up
input-line-status: up
output-interface: internet2-outside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule
The problem here as you can see is the Rule for dynamic nat that I added to make hairpin work at first place
dynamic nat
asa(config)#nat (internet2-outside) 1 192.168.150.0 255.255.255.0
Is it possible to access both
1)LAN behind ASA
2)INTERNET via HAIRPINNING
simultaneously via a single tunnel-group?
If it can be done, how do I do it. What changes do I need to make here to get simultaneous access to my LAN also?
Thanks & Regards
Abhijit

Yikes! I need HELP RE: connecting my iPod Nano!

I just bought a 4G iPod Nano TODAY. I'm kind of "electronically challenged." So I plugged my Nano into my computer, using the very brief instructions that were provided with my Nano. My songs loaded fine, but when I removed the Nano from my computer, I could not get the USB cord out of my Nano. Of course, like a *******, I pulled and pulled and pulled, until the wires started coming out of the connection. Then I really started freaking out! Got out my pliers, and finally was able to remove the connector. However, in doing so, I have now done something so that a new connector won't go in. I realized AFTER I had done all of this that I needed to press on the two sides of the connection in order to get it out of the Nano. Does anyone know if Apple will fix this? I am going to cry if this can't be fixed. Please let me know ASAP. I don't think I can sleep until I find out. Thanks for your help.

this falls into the category of abuse, so no, i don't believe apple will fix it. i would try buying a new cord first, see if that helps. unless it is the nano's connector that is messed up, then you are SOL.

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Need help in connecting

I have raised a question in OTN yesterday "https://forums.oracle.com/forums/message.jspa?messageID=10798738#10798738" but stil i am not able to get the connection working..
I need some more clarifications in it. can some one suggest
Regards
Vivekk
Edited by: Vivekk.Arora on Jan 17, 2013 8:40 PM

Vivekk.Arora wrote:
Thank you for your kind reply......i was just taking help ......
Regards
VivekkAnd we want to help. but the best help is that which leads you to a greater degree of self reliance. And you could have answered your question yourself (greater self-reliance) had you simply looked up the syntax of the ALTER USER command.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.

NEED HELP! CONNECTIVITY NOKIA 2228 PC SUITE

i bought nokia 2228 CDMA several days ago. It said that it could connect to PC suite and it has usb CA-101 for its cable.
The issue is i got this error "nokia 2228 connected in a non-compatible usb-mode"
I was trying to see another discussions and forums but no where to solve my issue.
Could it because that this phone has not been supported with PC suite? in fact, i see at official nokia website, and found that this phone is no where to found in the supported list. But it's true that nokia 2228 description's said that it can. How should i fix it?
I AM REALLY NEED A HELP!!!
already tried at XP SP2 and VISTA Ultimate SP1. All of them in 32 bit. also already install the latest pc suite. Have also tried uninstall and reinstall again. Also have used Nokia cleaner tools.
HELP!!! Thx

Download PC suites for nokia 2228 (compatible with Win XP, Vista, 7) here : http://www.nokia.co.id/dukungan-dan-software/dukungan-produk/nokia-2228-cdma/software
then new windows appear , click green panel "Terima dan mulai download" = Accept and start download.

Need HELP! connecting to wireless network; IP Address problems!

I am trying to connect to wireless networks using the AirPort built into my MacBook Pro. There are two specific networks I am trying to connect to, both are WEP protected. I know the passwords and can get into each of them but I cannot connect to the internet, which is the main reason for connecting to them in the first place! When I go into System Preferences and click on Network, I see that next to AirPort it says I am connected to the network but may not be able to connect to the internet because my computer has a Self Assigned IP address. I assume this means my computer is not receiving an IP address from the network. I am set on full auto with DHCP. So what's wrong? Please Help!!!

That indicates that the MacBook Pro did not successfully communicate with the DHCP server on the network. Do those networks have access control (MAC address filtering) enabled? If so, the best solution is to reconfigure the base station so that this feature is disabled. This adds no real security since MAC addresses are easily discovered and cloned.
If you can't disable access control, you will need to add the MAC address of the wireless interface of your MacBook Pro to the list of allowed clients.

Need Help on Connection pooling with asp

Hi,
I am need ur help on how i want set up the minimum and maximum connection for my asp programming.
I am using Oracle 9i database with driver "Oracle in orahome 9.02.00.54".
Ihave create the odbc to this driver for handle the connection pool.
How i want to set the minimum and maximum connection ?
This is my code:
Set cn = Server.CreateObject("ADODB.Connection")
cn. open "dsn=loadtest;uid=guardreg3;pwd=guardreg3;min pool size=15"
I hope you all can help me.
Thanks

James,
sometimes it makes sense to look at these things from a different (and broader) perspective.
Especially in a context of a corporation it makes sense to use a Single Sign On (SSO) server for authentication (usually against LDAP) . Something like Netegrity Siteminder, Oracle SSO Server (as part of Oracle Internet Application Server) or something similar.
Then you could have all your applications use the authentication method of the SSO server which will keep track of the valid session and the applications that participate in the SSO context.
On the Apex side you would have to write a custom authentication scheme to leverage that functionality, the session handling will no longer be of any concern to you.
Just a different way to look at it.
~Dietmar.

Need help installing 9i CLIENT on redhat linux

I'm getting very confused trying to figure this out. I'm completely new to Oracle, but not new to Linux. I've read the installation docs, but everything seems to assume that you are going to be installing the full database. I'm not sure what I need to do if I'm just installing the client.
I'm going to be accessing a remote Oracle database with read-only access from ColdFusion, so all I'll be doing is running queries - no updating or creation of records. Do I need to install the runtime version of the client? Should I run a custom install and just install the OracleNet and SQL*Plus components?
Is there any documentation with step by step instructions for JUST installing the client? I can't tell from the full documentation if I need to do all the pre-install and post-install stuff if all I'm installing is the client.
Any and all help on this would be appreciated. The documentation I can find outside of Oracle's all assume that I've already installed the client, and Oracle's documentation is just confusing me further because it is so fragmented.
Many thanks,
Mary

Hello Mary,
I don't know ColdFusion, but I asume you need at least SQL*Net to connect to the remote db.
So run the installer you have (even if you have only the full db software cd's) and select custom install (or manual product selection), there you should select sqlnet and sqlplus the rest will be selected by the installer (dependecies). If it is not automaticly called you have to configure sqlnet afterwards therefor you can execute netca in the $ORACLE_HOME/bin directory or netmgr, I don't know at the moment which is the best one for you. This tools will create your tnsnames.ora config file for the remote db settings.
Hope this helps a little, Olaf

Hi need help to connect to my redhat on vmware with host win xp ... plzzzzz

Similar Messages

Maybe you are looking for