Hi , Need Help Understanding proper software needed for my new macbook first time having it

im using a macbook pro 13inch and i just want to know what software i have to install to keep it up to date and safe from the flashplayer problem

Keep the system software up to date is all you really need to do. The malware to which you refer had nothing to do with Adobe's Flashplayer.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using ClamXav.
You should upgrade OS X to the latest version, 10.8.3, provided your computer is able to run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Similar Messages

Is an anti-virus needed for a new macbook pro?

Is an anti-virus needed for a new macbook pro with retina display?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. XProtect, Gatekeeper, and MRT reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no softwar

hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated

If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing!

I need some tips on transfering my LARGE itunes account from a pc external hardrive to time capsule for my new Macbook Air

I just purchased a Macbook Air that is being shipped as I type, What I am trying to do is swap all the info on my external hard drive that was used for my old pc ( includes pictures, music and very Large iTunes account ) to a 2Tb time capsule that I purchased to use to store all my info for the new Macbook Air that is coming, without downloading it to the Macbook Air first. Im not sure if its even possible to do but any help is greatly appreciated. This is my first Mac and I just want to make this transfer smooth and fast. Also looking to make all future purchases from iTunes go directly to time capsule.

i think you will need to use a computer somewhere in the process
you could try putting Mac OS on the hard drive with the files on, and then booting from the hard drive

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

I have Photoshop CS 5.5 version, but I've just changed my camera and I can't open my raw files. I need for my new camera Photoshop CC and Camera Raw 8.7 version. How can I do to update the old version? Thank you

Thank you for your valuable advice. I've solved the problem right now.
Thanks
2015-03-16 15:06 GMT+01:00 c.pfaffenbichler <[email protected]>:
I have Photoshop CS 5.5 version, but I've just changed my camera and
I can't open my raw files. I need for my new camera Photoshop CC and Camera
Raw 8.7 version. How can I do to update the old version? Thank you
created by c.pfaffenbichler
<https://forums.adobe.com/people/c.pfaffenbichler> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/7302535#7302535>

What charger do I need for my 2008 macbook pro 15"

what charger do I need for my 2008 macbook pro 15"?

This one:
http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro
Ciao.

What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.

What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.

That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone. Theyre darn good printer too. I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities. One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK. Good value at £70 and 4800 x 1200 DPI.

What add-ons do I need on my new Macbook Pro?

My MacBook Pro was recently stolen so therefore I will be needing a new one very soon. I just graduated from college with a Digital Filmmaking major and a Marketing minor. I hope to break into the film/tv/commercial industry soon, obviously with an entry level job on the production side. Any advice on hardware/software configurations, or any 'must-haves' for my new MacBook Pro?
(I would just go to an Apple store but the closest one is over three hours away)
This is my first post so please forgive me if there are any flaws.
Thanks for your time,
J

Prey http://preyproject.com/

I need to add new MacBooks to mac server workgroup manager. 10.9.5

i need to add new MacBooks to mac server workgroup manager. cannot find them by mac address, name or ip. how do i add the new MacBooks. i think there is no workgroup manger programs for mavericks, so there must be a new way to create and add new clients to workgroup manager. can someone please inform me or point me to a dock that explains how thank you.

Will the apple tv 2 receive a software update for the new interface?

Will the apple tv 2 receive a software update for the new interface?

J.T.Holloway wrote:
I don't love it, but I don't dislike it either. Between the two, at least initially, I think I prefer the previous interface.
I know that will be the case for me.
J.T.Holloway wrote:
The new one is a little more Apple-like with icons instead of lists, but I liked having everything right on the screen before and now I have to scroll down to get to the icons below the tv screen view.
The old interface wasn't perfect but logical - as you say the icons are for the iPhone and iPad crowd, and as i see it will entail more scrolling and button hopping on the remote.
J.T.Holloway wrote:
I do like the icon look as it is more like the iPad, iPhone, Dashboard, etc.
Quelle surprise......
It's a bit like the redesign of these discussion fora - the new layouts are designed for the younger generation but far too much scrolling and hard work to find what you want compared to the old format.
I HATE SCROLLINGTO FIND THINGS
Sorry, rant over.

HI! I have a new macbook air but having difficulty connecting to a router if I am about 10 meters away. My iMac, iPad, iPhones and iPods can connect easily. Is there something that I need to configure? I have no issues if I am close to it. Thank you!

HI! I have a new macbook air but having difficulty connecting to a router if I am about 10 meters away. My iMac, iPad, iPhones and iPods can connect easily. Is there something that I need to configure? I have no issues if I am close to it. Thank you!

Hello, If you are dealing with one of the really thin iMac's that have no superdrive, then the superdrive icon should not appear on the desktop when you plug it in, but when you put in a disk (CD, DVD, etc.) that should appear. If you go into disk utility, and look at superdrive, that should be clickable and not grayed out when you have it plugged in. If this does not show up in disk utility, go to Apple, and ask to speak to their supervisor, speaking to a customer service agent is like talking to a potato, nothing gets done. Good Luck!

How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011) from a Windows 7 PC?

How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011)? I have already formated the HD and preformed a clean install of Windows 7. Perhaps I did this too early. I have read I need to install the drivers from my OS X DVD, however, OS X Lion does not come on a DVD! I've also read that I can download OS X Lion from the App Store and burn it to a DVD, however, all I have are Windows PCs which don't support the Mac App Store.
Is there no way for me to download these drivers from a Windows PC? I know they exist. However, you are supposed to download them through Boot Camp in OS X when you are creating a new Windows 7 installation. I'm I stuck?

I am pretty disappointed in the lack of documentation.
This is the Apple Support page for Boot Camp:
http://www.apple.com/support/bootcamp/
No mention anywhere of Lion, of 4.0/4.01
In the past, 10.6.6+ was suppose to - and sometimes did - provide for a download drivers from within Boot Camp Assistant program, in order to save them to flash or such (that should be about 1GB, too large for CD). Some macs req'd a USB-DVD or other driver that was needed pre-install of Winidows
You don't install Apple drivers until after Windows is installed otherwise,
It is possible for me, with a tower, to run w/o needing any drivers from Apple. But with laptops, mini, you do need some drivers from Apple for graphics, internet, wireless, SMC support.
And right now, loading any Apple support Tech Note articles is very very slow.
People keep asking why Apple can't post 3.0 or 4.0 like they do the updates. Only logic is to force t he download from inside OS X or from an OS X DVD. Otherwise would be here, and avoid all the trouble. they aren't of use on a PC, and any PC motherboard vendor does post their support software for download.
Apple Support Downloads #bootcamp

Old Black Macbook for a New Macbook Pro?

about 5 or 6 months i got a black macbook and i have 3 years of warranty but the motherboard crashed on me out of the random so im just wondering can take my old black macbook for a new macbook pro and pay the difference?
Message was edited by: iloveska2

Apple will typically allow a return within 14 days of your purchase... which is basically what you would need to do if you wanted to make an exchange. You would basically return your old one and buy the new one. As the previous poster mentioned, at this point, you won't be able to achieve this working directly with Apple. As your machine is 5-6 months old, there is wear to consider... it is basically no longer a new machine. Apple stores are not equipped to "appraise" used machines.

Did you get a case/sleeve/briefcase for your new MacBook Air? Which One?

I'm wondering what is any case/sleeve/briefcase others bought for their new MacBook Air. I'm in the market, and feeling overwhelmed. If you've bought anything to carry/protect your Air, can you post the make model, and price? thanks!

I had been looking for a case / sleeve for my MBA 11" since I purchased it about two weeks after it was released. Today I re-visited Best Buy and they had a Targus 12" Netbook Slipcase that fits the MBA 11" just about perfectly. The Slipcase is 12.4" x 0.79" x 9.65" on the outside and 11.7" x 1,5" x 8.3" on the inside for the laptop. The MBA slips in the case with no need to squeeze it at all. There is no extra room on the side, but it fits beautifully. The top of the case has only about an extra inch or less. This is the best solution that I have seen thus far. It can be purchased for under $30.

Hi , Need Help Understanding proper software needed for my new macbook first time having it

Similar Messages

Maybe you are looking for