Hi...Need some help saving down.

I am not sure if I am posting in the correct thread but, I need someone to resave a file so it is compatible with CS4. Do not think I can attach a file from the looks of it o_____o;; so if someone wants to reply to me with an email that would be awesome ! The problem is I was working on this at school, which I never work on stuff at school, where they have cs5, and brought the file home and need some of the outlines in the file. Thanks in advance if you can help...!

Thats the thing, I did not use any cs5 features, all pretty simple text that is outlined and shapes. My problem is that it is cutting out everything that is outside the art box ! I do not know if that is because I am trying to open it with an older version or I should have saved everything inside the art box. I already tried saving as pdf, or even using "place" it always ends up cutting and adding a clipping mask to anything that was fully outside the box. Even when I release the clipping mask it just shows something that was half off the board.

Similar Messages

  • Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

    Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

    Probably a good question to ask Viber or look at their support site.

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

    I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
    thanks!

    I wouldn't say pixelated; more like blurry.
    Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

  • My airport problem has returned big time --Need some Help!!

    Aloha once again:
    I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
    I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
    I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
    This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
    Dan Page
    Maui, Hawaii
    The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
    I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
    One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
    Still need some help!!!
    Dan

    First, power off both the Time Capsule and AirPort Express.
    Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
    Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
    If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible. 
    Please report on your results.

  • We have a set of oracle clients running on T5220 zones that need some help

    Greetings all -
    We have a set of oracle clients running on T5220 zones that need some help.
    If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
    Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
    Running "uname -a" from the client gives:
    (SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
    Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
    Running "uname -a" from the dataserver gives:
    (2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
    The RDBMS is 10.2.0.4
    Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
    We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
    We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
    Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
    Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
    tia -
    Jim
    Edited by: jim1768 on Mar 31, 2010 1:47 PM
    Edited by: jim1768 on Mar 31, 2010 2:12 PM
    Edited by: jim1768 on Mar 31, 2010 2:13 PM

    Hello,
    We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
    Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
    Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
    http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
    http://blogs.sun.com/glennf/tags/throughput
    http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
    http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
    http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

  • Need to try to find Pi, need some help

    I have need to try to find some of the values of Pi,
    but when i try math.PI i only get down to like 8 decimals.
    I need some help.
    Not sure were to start either!
    Message was edited by:
    Aten

    You're just adding terms together. There's a series of them, so you need a loop. Each pass through the loop could add one more term. Note that each term has a denominator that is bigger by 2, and it's either added or subtracted (or to look at it another way, you're adding negatives alternately).
    The main issue is how accurate you want it to be. You can't add the digits together forever. So you have to choose a stopping point. You can stop based on a time period (when you've run out of time, stop adding new terms) or on precision (when two subsequent values are close enough to each other, stop).
    You'll probably want to use java.math.BigDecimal.
    If you give some more details about the assignment I can make some more suggestions.
    Why don't you give it a try and see how it works?

  • Need some help with Calendar on my iPhone.

    Ok folks. Need some help and it may be basic, but I'm struggling with it.
    My wife and I both have iphone 5's. Both phones share one iCloud Id and one Apple ID.
    So, how do we share information across the apple calendar app?
    If I add something to my cal. It does not go to her. How can we get them to sync?
    Please help!!!
    Thank You!!

    Two things to check by putting the two iOS devices side-by-side.  First, check in Settings > iCloud to assure that you are indeed both using the same iCloud login.  Also, check that calendar is toggled on.
    Then, check Settings > "Mail, Contacts, and Calendars".  Scroll down to the calendars section and assure that your iCloud calendar is set as the "Default Calendar".
    Then, check that Settings > "Mail, Contacts, and Calendars" > "Fetch new data" is set to something suitable.  Note that "Push" will be best for iCloud.
    Lastly, open Calendars app, touch "Calendars" at the bottom, and assure that iCloud calendar is checked so it is visible.
    Then give you calendars a try again making sure that you are posting calendar events in the iCloud calendar.
    Hope this helps.

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

  • Need some help with sound quality

    Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
    I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
    I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

    AecDuck wrote:
    Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
    The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
    If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
    I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
    Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
    I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
    It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

  • Need some help with my thunderbolt!!!!!!

    i was on it the night before. then at 4 am it goes to the HTC white screen and does nothing else but that. I have tried everything from rebooting to taking out my SD card. I need some help. Is there anyone out there?

        Everyone, I'm so upset to hear that your phones aren't powering on. I'm hoping your issues have been resolved by now, but if not, I want to try a few more steps. Since removing the battery and charging aren't working, I suggest first trying to boot your phone into safe mode http://bit.ly/Nt3m5U. If no change, please try these steps. No information will be lost:
    1. Boot into recovery
    o Press and hold Power, Choose "Restart" option
    o When screen turns off, press and hold Volume Down and Power
    2. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
    3. Press the Power button to select “RECOVERY.”
    4. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
    5. Using the volume button, scroll down to “Wipe cache partition” and select it.
    6. Select "Reboot system now"
    Let me know if you still need assistance.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Need some help with GUI development

    Hi ppl.. I am new to labview and I am currently involved in a testing equipment development. I need some help. firstly I need to know if multi-screen GUI (with icons and stuff)is possible in Labview. Secondly I need to interface the measurements to a database. Would it be possible to create just small executable to perform the measurement part alone and do the rest of database operation using VB. (or would it be advisable to do the whole lot in labview)
    the final sft should look something like this
    screen1 :setup screen... interface with database
    screen2 :actual test and test results
    screen3 :log file creation
    measurement is via daq board and i also need to send some control signals and set up TCP/IP for data transfer.

    Hello.
    I am not completely sure what you mean by "multi-screen", but I am pretty sure that doing the user interface using a tab control will work for you. I have attached an example VI which is a state machine (which in LabVIEW you do with a case structure inside a while loop). Notice how the configuration controls are in the first page of the tab control, associated with state 0 of the state machine, but in the block diagram, they are actually used in state 1 of the state machine. Instead of writing a very long description, I will let you take a look at the code (which I saved in LV 7.0 version). Let me know if you have questions or comments
    Attachments:
    MultiScreenStateMachineExample.vi ‏50 KB

  • Hello, I need some help on renaming the title on mi web pages!

    Hello, I need some help on renaming the title on mi web pages! appear to be locked by the template and I would like to know if is posible rename each page with diferent title? Thanks,

    @ Gary: No, there is no need to specify an editable region in the page title.
    If you make a template from a page, by saving it as a template (using "save as template"), the page title is automatically made editable.
    @ Jesus: if you look into the code of your template or of any childpage, it should read like this:
    <!-- TemplateBeginEditable name="doctitle" -->
    <title>Mi PageTitle</title>
    <!-- TemplateEndEditable -->
    meaning that the page title is indeed editable.
    If it does not look like this, something went wrong.
    Maybe do a little test, save your page as a template and see if the code reads as above.
    It is important that you keep your templates in the Templates folder in your root folder
    Do not move the folder or change its name, otherwise it will not work.

  • Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

    Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd  and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

    There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • Bt infinity way to slow !!! Need some help

    We just got bt infinity 1 installed with home hub 5 as well, I did a speed test and it was only getting 10mbps download, 5 Mbps upload and 85 ping, is this good or bad. We currently have 10 devices connected to internet in this house, I can't even watch normal you tube videos in 480p, this is annoying as paid a lot of money for it, I know the problem can rely down to the amount I people connected, it may be also down to where the router is ? Need some help to how we can get best performance and how to share the connection between all of us or how to get more as on the best package available ? Thanks will need all the help as the internet is atrocious right now, almost as bad as our non infinity by home hub 2 we had a few days ago

    Can you run this checker and post back a screen shot of the results
    http://www.dslchecker.bt.com/adsl/adslchecker.welcome
    and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
    http://speedtest.btwholesale.com/
    As you have a Homehub 5 can you also post the stats from 1-12 by logging onto the homehub management pages then troubleshooting > helpdesk. http://bthomehub.home/

Maybe you are looking for