Hi, new here.... a question for ya's.

Hi there
Can someone give us a link to the Cool and Quite version 1.6.1.2.,
I cannot find it anywhere on the AMD site.
Also, when running C&Q its shows my volts as 1.30/812 MHz CPU, i know this is right, but does this impede on my performance.
i.e instead of putting ,2000MHz into a task, it just puts 800MHz. Would/does this effect the performance and/or speed of the computer. Because I just installed a long game and noticed is was taking along time installing... I looked on Q&C and it said my CPU is at 800MHz... I-got-to thinkng, if I turned off Q&C..... It might have speeded things up...
hehehe, I might be wrong here, my knowlege in such matters, is......eeeer.....crap.
Thx for your help here's.
Jertsy.

Quote
Originally posted by Cozman
Cool n Quiet is downloadable from the msi live update utility...
perfomance isnt affected because although ur pc is idling @ 800 Mhz as soon as extra power is required cool n quiet adjusts and sets it to required amount or max of 2000Mhz if full load ... so basically set it on auto and forget it it works good on its own
Great thankyou....
Quote
Originally posted by Cozman
so basically set it on auto and forget it
how do i do this m8
cheers.

Similar Messages

New mac user question for multiple user setup

Hi
Trying to figure out the best way to set up my mac. I am switching from a pc where we have two user accounts (for my wife and mysef). We both have iphones with seperate icloud accounts but share the same itunes account for purchases. We currently use separate user accounts for itunes as well (keep her and my playlists seperate) Also, we both have emails we will want to use the mail application for too.
So, my question is, do i need to create two user accounts or can i use just one and have multiple people / email accounts on the mail app as well as use only one itunes account for seeing how all contacts now back up in the icloud.
as a PC user, still trying to figure out the Mac world.
thanks

Can't help with the cloudy stuff since I don't network computers or have any iOS thingys. But, since you're a newcomer to the Mac, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Hello, new here and looking for suggestions on creating a conf script

Hi,
The current project that I am working on would like to make a java display window to be fully customizable from a conf script.
the java display window has 10 fields or so, which are updated every second. the java object passes to JNI, gets populated by C++ data, and returns back to java for display.
Now, how is one able to create a script that can modify that java window to display only certain fields, lets say 1-5.?
suggestions, or know of an area that i can look into?
thanks

First you may want to google »photoshop tutorial distresssed«.
As for combining images like that a combination of Blend If-settings (one can split the handles by alt-click-dragging them)), Layer Groups set to Blend Modes other than Pass Through and Grtadient Maps may be employed to maintain high editability.
One could also just use the images as Layer Masks for Solid Color Layers (and use Levels or Curves to get the intended contrast), though.

A question for Guru kglad!

Im trying to break up some fla files to use reusable .as
files. I have created a UTIL file with static methods. One example
is a method used to load in external files and open a Progress bar.
The issue is how do I get the Progress bar into this .as
file?
I do not want to pass a MC into the method that already
contains the Progress bar. I'd rather on the fly create a new
instance (or maybe global instance) of the Progress bar from within
the .as file.
How can this be done?

Ok, I feel like a needy person here. How?
Where?
Heres a question for the imports of Flash stuff you have
import statments such as
import mx.something
Where the heck is the mx folder?
How am I to see where to include files from?
How do I import the Progress bar component?
I cant find what Im looking for, partially because I dont
know what Im looking for.
>>>>><<<<<

Question for Mike - LaCie FireWire & iDVD5

Mike - Can you help please ? John Beatty suggested I post this to you :
I have just bought a LaCie Double Layer bus-powered Firewire DVD. It is an NEC DVD+-RW ND-6550A device. The drive came with Toast 6 Titanium, which is now installed.
I also have an internal Matshita DVD reader/ CD writer as part of the original G4 setup.
When I attempt to burn a project in iDVD5.0.1, the internal drive opens up and I get a message telling me to insert a DVD, even though this is not a DVD writer. I've tried Control-clicking the Burn icon, but nothing different happens. There is no option for drive selection in the iDVD menu structure either.
I don't really want to spend ages writing Disk Images, then writing to the LaCie, and I've searched this forum for a similar issue - but 'fraid I can't find anything similar. Does anyone have any suggestions that will enable iDVD to recognise the external LaCie ?
Appreciate any advice
Paul
G4 AGP 500Mhz; Mac OS X (10.4); 768MB RAM
RE: How do I get iDVD5 to recognise my external DVD Drive ?
Don't skip this route - the amount of "extra" time is almost zero - in effect iDVD is doing this anyway behind the scenes to some degree. And separating encoding from burning makes a lot of sense. I always "Save as Disk Image" and burn separately.
And there is a guy that works for LaCie that frequent this forum:
http://discussions.info.apple.com/webx?224@@[email protected]/7
I think you just need the proper disk burning profile from LaCie. You could probably e-mail Mike at the address on his profile. Or post a new thread titled "Question for Mike - LaCie Firewire and iDVD5"
John B.

Mike
Thanks. I tried burning a disk image for a 48min video in iDVD. That worked fine when previewed. I then burnt it to DVD in Toast 6.1 using the Copy (Image File option) Tab.
The resultant DVD will not play in either my internal Drive, nor my normal DVD player - which is a multi region player. The DVD is only recognised in the external LaCie. BUT, playing the movie only shows chapter 1 of 12, and there is no sound at all. (despite the preview showing it to be ok).
As a test, I burnt the movie in iDVD5 using the Pfurz & Hurz plugins. It burnt ok, but I got the same result - chapter 1 only and no sound.
My supplier for the LaCie rive suggested I also try and export the movie from iMovie to a Quick Time compression at full DV quality to make sure that worked. It doesn't - despite a 35Gb spare capacity on the Hard Drive, I either get a complete system hang with hard restarts required, Error 36 or the occasional short clip compressing OK. I'm at a loss - the fact that I get a decent image file from iDVD indicated there's nothing wrong with the video files...
Any suggestions ??!

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

New WD My Passport for Mac - questions!

Hi, everyone,
I just bought a new WD My Passport for Mac 1 TB. I am going to use it to run Time Machine and then drag and drop pertinent files that I need. From there, I am doing a clean install of Mountain Lion. I have a 2012 MacBook Pro.
I just have a few questions.
1. I read that there are big issues with this and Mavericks/Yosemite. If I ever upgrade, am I am going to lose everything or has that since been resolved?
2. How do I install it? When I read the manual, I am not sure if I am supposed to install the software (because of issues with point 1), just plug & play, how to do Time Machine, and so on.
I have another My Passport from a few years back, but don't remember how to set it up.
If someone can dumb it down for me, I'd really appreciate it. I am looking to do a Time Machine, then drag over various documents, my Music folder, iPhoto Library, Mail exports, and a few other things.

Thank you again. It's really nice there are people like you willing to give their time to help others.
An update: My Passport (not named that!) is backing up via Time Machine as we speak. Next step is to copy the files that I need over to the hard drive. I already have on another hard drive, but I figure it is better to be safe than sorry.
My question for you is basically if there is anything I should try to think about or remember to bring over. These are the things that I use regularly and what I have done on the other drive and will do here:
- Microsoft Office (mostly just Word): I will reinstall the disk, I have the activation code, and I will drag over all of my files
- iMovie: I've made one movie, and I like it, and I dragged it over and tested it on another MacBook and know it works
- iPhoto: I will drag over iPhoto Library
- Mail: I have exported all of my Mailboxes, will re-import them, and then re-set up my accounts
- iTunes: I dragged over iTunes Music from the Music > iTunes > iTunes Music folder (?)
- iCal/Notes: logging back into iCloud should do it
- Stickies: I know there is a database in the ~library ... do I just drag that over?
- Chrome: I will download it again
- my printer: I think I just go to the site to download the driver
- Airport Express: does that just work on its own?
- Dropbox: I will redownload it but, heck, I might just drop my account
- Bookmarks are exported from Chrome
- iCal is exported, just in case.
- Contacts are exported, just in case
I don't THINK there is anything else I am forgetting that I might use regularly and not realize it. Do you have any suggestions of something I might be missing? I do have an iPhone backup I might want to snag (I know it is stored elsewhere...) but I am thinking of wiping that clean, too.
Should I take note of any specific security or user settings I have (other than basics, like colors and that sort of stuff)
I am nervous that I will forget something but excited to have a nice, fresh new MacBook and fool myself into thinking I got to treat myself to something new!

New video editing system for AE, GPU questions

Hi all,
I am about to configure a new system to use mainly for After Effects CS6, and Premiere CS6. I'm experiencing some difficulties choosing the right GPU.. If any of you could take the time to answer these question for me..it would be greatly appreciated!
- I read the GTX 7xx with Kepler structure aren't supported/CUDA cores aren't used, is this true of do they work fine?
- Does a good video card (with 1000+ CUDA cores) only help for speeding Ray-traced 3D, or will the overall editing experience be faster as well? ('live preview' while editing 'normal video', as well as the final render?)
- What are the critical factors to look for in a video card for editing? (GDDR RAM, Base Clock, Memory Speed, Memory Interface Width, Memory Bandwith CUDA cores) I mainly work with 1080P digital SLR video and video effects, not a huge amount of 3d texts etc.
- If i would choose the GPU as render engine, will the work be done purely by the GPU, of will it just 'assist' the CPU?
- So far, i think the GTX 760 would be a good option, what is your opinion about this card for AE editing? Would this be a good choice or will a GTX 6xx or GTX 580 be a much better option? My budget for the whole system (without monitor etc.) is max. 1000 euro.
- Would buying an SSD for storing the program files and the project files, be helpful? Or won't this increase the speed in editing by too much?
The system I have on my mind so far, recommendations and changes are very welcome..
MSI Z87-G45 Gaming
Intel® Core™ i7-4770K
ASUS GTX760-DC2OC-2GD5
GeIL 16 GB DDR3-1600 Kit
Seagate Desktop SSHD, 2 TB
Cooler Master B700

The GPU acceleration for Premiere is completely different than the Ray tracer acceleration in AE. The GPU specifications along with the system ram and CPU cores/clock absolutely effect the performance of the playback in Premiere. Which means selecting the correct GPU is based on Premiere's MPE acceleration and the workflow/media used. The concept that comes into play here is processing latency. A older card with 1GB of vram and a single or dual core CPU may be able to playback a single 1080 stream by itself without any scaling. However as soon as any effects or frame alterations are added then the time it takes for the data to process at the cpu, buffer into ram, and then process through the GPU is to long to maintain the playback. The clock speed of CPU, Ram, and GPU/Vram all come into play as to how long it takes for this entire pipeline to process. The amount of threads and cores decide how much data can process at any point in time. The more layers and effects to process along with frame changes, the more data that has to be processed in any time segment required for playback. This is similar to how much water needs to go through a pipe. This can be increased by either increasing the size of the pipe or the Water pressure in the pipe by how fast the water is fed into the pipe. Both aspects have their limitations based on where the water is coming from and going to and what the conditions required are. A balance is normally required between both the size of the pipe and the amount of water/pressure sent into the pipe. However the greater the volume of water required at any time segment the greater both aspects must be increased. IE this translates over into clock speed equals water pressure and threads equal size. SSD's also have a significant aspect on processing latency. The latency of SSD drives is a fraction of mechanical drives. This means the amount of time it takes for SSD drives to handle all of the read or write requests made by the application is significantly lower. This translates into lowering the amount of time drive requests effect the overall performance of the realtime playback along with how fast files are written. Since codecs have different data rate requirements often times SSD drives are cheaper options to handle data rates that normally require significant raid setups that are expensive. SSD drives also handle far more requests simultaneously which translates to putting more operations on a single disc. This often translates into better performance with more complex timelines or compositions.
The comments regarding GPU specifications not really having any impact are relating to AE only. This is absolutely not the case for Premiere, AME, and Speedgrade or almost any other GPU acceleration application.
Eric
ADK

TOP questions for Eseries devices - not so new!

Just noticed that the thread titled:
TOP questions for Eseries devices - start here [new]
Really isn't so new dated 30-Cot-2007 11:48 AM - last edited on 30-Oct-2007 11:48 AM
The post suggests that the first thing to do is update to the latest version of software.
Alas the last update for E72 was 27 October 2010 which is flawed! I know as my phone has misbehaved since installing it and I see other users reporting similar if not the same issues here.
*#0000# reports version 052.005.217.11
Question - How does one down grade to previous version?
The post then suggests "If you still experience problems, you can try if formatting your Eseries device helps. Format the device by dialling *#7370#. The device will request a security code, the default code is 12345 unless you have changed it."
Well actually on the E72 this does nothing! I Type in *#7370# and its displayed to me and nothing else happens. If I enter *#0000# I get the version number so it seems the software/firmware does not understand the code above!
I did try 'factory settings' option from one of the control panel menu's instead at some point of my misery but was surprised by just how little effect that had - many things were not reset.
If your still reading, I thought I would share some steps I have found to sometimes help on E72 when it appears to hang / stall:
1. Try holding down the home button and if the running applications bar is shown try closing the applications by pressing the delete (backspace) key.
2.- If that fails try pressing the off button and selecting 'offline' mode - This sometimes works - if it does then try previous point before going back to an online mode such as 'general'.
3. If that fails - try holding down the power button to turn device off - that sometimes works! But sometimes the keyboard lights simply stay on until the battery goes dead...
4. Remove the battery wait a moment and then re-insert battery. You may then have to enter the time and date. Do check your alarms - during GMT I noticed all my alarms would have incremented by an hour! Not seen this since BST started.

Very strange - or perhaps not that strange but just another issue.... I tried the Hard Reset code again at this time it worked!!! I'm now re-entering my details and remembering what I didn't back up But if it fixes my issues it will be worth it.
FYI from another fine post I found:
FOR SOFT-RESET:
- at Standby Screen type-in => *#7780#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR HARD-RESET:
- at Standby Screen type-in => *#7370#
It will ask for “Restore all phone settings-phone’ll restart….”
Then it asks for security code enter factory default => 12345
FOR FLASHING- TOTAL RESTORE: (Do this if your phone does not boot up)
1) Remove the battery, and then wait for about 20 min or so before putting it back
2) Press and hold these three keys together -Green dial key, Star key[*], Three key [3]
3) switch ON the phone.
4) Do not let go the three keys until you see the WELCOME screen displayed and just let it complete the boot process
if this doesnt help contact Nokia Care Point-> http://europe.nokia.com/A4388379

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

New Sequence Question - for slow motion video

Hi,
I'm a very new user of Premier. I've recently had issues with choppy playback of my preview videos. After much research I believe the issue was down to two things. Firstly my sequence did not match my input clip, I had it set to my desired output. Secondly, I was editing video across my network, rather than bringing it locally to my PC. I've fixed the latter issue by copying video files to my local machine and then moving them back onto the network once I've finished editing.
The advice out there essentially seems to be to match your sequence to your primary input video. I've done that and it helps. However, it's raised a big question for me. My input video is from a GoPro and is at 1080p 50fps. I ultimately want my output video to be slowed down to 25fps (resulting in a constant slow motion effect throughout the entire sequence).
If my sequence settings are set to match the input clip (50fps) and I slow the video down by 50%, will that result in an unsmooth video? My basic understanding is that if I slow 50fps video down by 50% then Premier will have to double the amount of frames. Where as previously, if I slowed it down by 50% Premier had enough frames to play with as the output video was 25fps.
Hopefully my question makes sense! Any advice on what the best approach is? Or is this a complete non-issue when it comes to exporting the video (providing I export to a 25fps formart)?
Thanks,

I think you said it OK, you are just missing the right words to do what you want. Let's walk through this for you, and for others that might read it later.
If you take a 50 frame per second video and put it into a sequence created from it, then slow it down 50% it doubles up each frame to achieve slow motion. Not what you want.
If you take a 50 frame per second video and put it into a 25 fps sequence, it drops half the frames to play at normal speed. Not what you want.
What you want to do is interpret the 50 fps video to 25 fps, then drop it into a 25 fps sequence. Each frame will play at 25 fps and generally be smooth as silk.
I don't have any 50 fps clips handy, but here are examples of taking 60 fps to 30 fps. (Excuse the idiot way that we Americans do things. Our 30 is actually 29.97 etc)
First, right click on the clip in the Project Panel, select Modify, and Interpret Footage. Then change the 50 to 25 - similar to this image:

Support , This is Thamer mohammad ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes

Support ,
This is Thamer mohammad
,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes

These boards aren't Apple Support; nobody here can reset the questions. Click here, phone Apple, and ask for the Account Security team, or fill out and submit this form.
(90021)

HT201269 Have new iPhone 5s and older iPad ( looking to buy new iPad ) question for both is should I hook them up to mu computer and back up the computer on each devise and sink and than the next one. The second question is should I do the I pad first ca

Have new iPhone 5s and older iPad ( looking to buy new iPad ) question for both is should I hook them up to y computer and back up the computer on each devise and sink and than the next one. The second question is should I do the I pad first cause it has photos in my email that have not been downloaded and it is one of or is the first model

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

HT5312 Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes

Dear Apple Support , I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes
<Email Edited by Host>

Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers.

Dear Apple Support , This is ***Abdurrahman*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account . Best wishes,

Dear Apple Support ,
This is ***Abdurrahman*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,

The people on these boards aren't Apple Support and can't do that for you. You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(102461)

I can't remember my security question answers , so please help me to Create new Security Question for my Account : ******** , Best wishes

I can't remember my security question answers , so please help me to Create new Security Question for my Account : **********
, Best wishes
<Personal Information Edited by Host>

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Hi, new here.... a question for ya's.

Similar Messages

Maybe you are looking for