Hi ! new os x problem

Hi !
I want to install the new OS X Mountain lion and i have a little question ( i have a MacBook pro 15 , with Lion ) :
when i am installing the new OS X Mountain lion, do I need to install all my software as well ( such as Adobe) ? or everything stays the same?
I believe there is a differences between the operating systems and i wanted to know how it is influence the installed software
Thanks
Yoav

Also... Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade, you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)

Similar Messages

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

Can't create a new illustration. Problems occurred while saving the print file.

I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
I have rebooted with no avail.
System:
Adobe Creative Cloud CC
Mac Book Pro 2012
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3

Is a printer connected? Is it turned ON? Is the driver up to date?
Illustrator checks this every time and also writes information on the printer into the file.

Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.

I just downloaded the new Firefox 4, rebooted, and viewed you videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

I just downloaded the new Firefox 4, rebooted, and viewed your videos re the new look and new features. Problem is, my toolbars look no different than before. The new icons you talk about do not appear on my screen. Please advise. Thank you.

The Firefox icon is the default feature for Windows Vista and 7 only, it does not apply to Windows XP users.
To have the Firefox icon instead of the Menu Bar:
View > Toolbars and UNCHECK the Menu Bar.
After that, click on the Firefox icon and you'll have the Menu Bar appear again.
http://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing

New Outlook sync problem after update!!!

I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem?

My iMac keeps showing an install bar every time I reboot or restart since upgrading to OS X Yosemite. This never occurred in any of the previous OS. Is this new or a problem? I have an iMac (27-inch Mid 2010), Mac OS X (10.6.7).

they moved to a progress bag instead of the spinning gear or beach ball

Three new bioinformatic coding problems now in WIKI (all require regex)

At the bottom of this page:
https://wiki.sdn.sap.com/wiki/display/EmTech/Bio-InformaticBasicsInRelationtoScriptingLanguages
I've defined three new bioinformatic coding problems (Problems 3a-c).
These all involve regex parsing in one way or another and are therefore a lot more interesting than the first two problems I've presented.
I'm hoping that Anton will continue to knock out solutions, and that others will feel challenged enough to join him.
djh

Anton -
I am way impressed - not just by your code and how fast you produced it, but also by the speed with which you grasped the STRIDE documentation and put it to very good use.
Regarding the question you ask at the very end - this question goes to the heart of why protein tertiary structure (the actual 3-dimensional shape of one chain of a protein) is so hard to predict, and why governments, universities, and pharma are throwing so much money at it.
If protein primary and secondary structure were many-to-one, prediction of protein tertiary strructure would be a lot lot simpler. (For example, if "VVAY" and all "similar" primary structure subsequences mapped to the same secondary structure.)
But the mapping is, unfortunately, many-to-many because the amino acids (AAs) in a primary structure chain always bond the same way - the COOH (carboxy) of one AA bonds to the HN (amino) of the next one to produce C-N with the OH and H going away to make a water moleculre ... COOH - HN ---> C-N + H20.
And as pointed out by Linus Pauling (the discoverer of protein secondary structure), the C-N bond can take two forms:
a) one that is llkely to force the two amino acids to become HH (part of a helix)
b) one that is likely to force the two amino acids to become EE (part of a "stand")
You may be surprised to find out that even primary structure subsequences of six amino acids can wind up as different secondary structures - not always "H" vs "E", the variants might be
E TT H
H TT E
EEE HH
HH EEE
etc.
Anyway, thanks a lot for what you've done here.
If you decide to stay involved a little longer, you will very soon be able to understand why there may be real promise in the approach to protein structure that is being taken here:
http://strucclue.ornl.gov
(This is why I want to get SAP interested in the vertical bioinformatic sector - you can see why an integrated IDE with a robust DB is so important.)
BTW, the site mentions Dr. Arthur Lesk as a team member. Arthur is considered one of the fathers of what is called "structural alignment" (as opposed to pure sequence alignment.)
If you Google him, you'll see that he has written many many books on bioinformatics - all worth purchasing if you're going to become involved in this area. Arthur was at Cambridge (MRC) until recently, when he reached mandatory EU retirement age and took a position at Penn State here in the US.
Best
djh

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

You might be able to depending on the age of the disc and the model of your newer used iMac. Only way to tell is to pop in the DVD and see if you can install the iLife programs.

E6 new Firmware critical problem

Hi,
After 3-4 days of upgrading to latest firmware(for E6)..the screen goes blank/locked while dialling or attending calls, even during the alarm too, screen goes dead.
honestly, i sensed the problem while switching off my alarm but touch-screen didn't respond well & later experienced the screen went blank/locked/unresponsive(till u cancel/end ur call) for dialling & attending calls too.
my phone is @ Nokia care since monday, they promised me to return in 1 hour & now its more than 4days, & now they escalated the issue to L3 support vch may take another 10days.
Anybody having idea. I request NOKIA moderator to plz look into d issue@ d earliest.
My Location:Bangalore/India
P.S. There are some more ppl who hv experienced d same prblm & they are ended up everytime by replacment with new phone, coz they again did the upgrade on new phone & same problem started after 5-6days. Its a critical problem. smbdy help!
~Suren

Dear posters
I too was confronted with this problem on my E6. I upgraded to Belle refresh and from that moment, whenever I receive a call, make a call, or when the alarm(clock) signals, the display goes black
When receiving a call, Very, very briefly (maybe as short as two-tenth of a second) I see the caller info in a flash before the screen goes to black (so I can not really read it)
After the call (or - in case of an alarm sounding - after stopping the alarm, the display is illuminated again
Also, in my situation, no protective foil is covering the proximity sensor nor something else is obstructing it
It happened directly after the update, before it everything was fine which makes me convinced that it can not be a hardware failure
This assumption is backup up by what I have read on the web:
the module in the E6 that is detecting the proximity (as well as performing the ambient light detection) is called "DiPro" and uses an external Infrared-LED. The current flowing through this LED (which off course determines the amount of IR-light and therefore the sensitivity of the proximity measurement as a whole) is software controlled
This (to me) is a very plausible explanation that there is something wrong with the software indeed
Why this fault does not appear on all E6-phones I don't know, but I assume that the combination of the Belle[refresh] software (incorporating the assumable altered steering of the DiPro-module) in combination with certain hardware versions of the E6 is a conflictuous one
It's pretty bizar that Nokia has not supported up til now although a software update is clearly the basis of the problems
If anyone here has found a solution on the mean time, I really hope to hear from him/her
Thanks !!!

MacOX 10.6.7 / FF 4/ Can't run Netflix which require 32 bits/ checked the 32 bits in the FF info window but no results/ Any news on this problem ?

MacOX 10.6.7 / FF 4/ Can't run Netflix which require 32 bits/ checked the 32 bits in the FF info window but no results/ Any news on this problem ?

Hello,
look at following topic http://bbs.archlinux.org/viewtopic.php?id=71643
Seems to be a bug

Any news on the problem of large CHC files increasing size of roaming profiles?

Any news on the problem of large CHC files increasing the size of roming profiles? Thank you.

I talked to the product manager. Here's what he said.
This was addressed in our last release. CHC 4.0 changes the location of the locally stored documents so that they are longer included when users synchronize their roaming profiles. The CHC will even move previous files to the new location when users upgrade.

I have a new computer and I would like to transfer the adobe pro to new computer. Problem is I do not have the install CD anymore..

I have a new computer and I would like to transfer the adobe pro to new computer. Problem is I do not have the install CD anymore..

Hi Matt,
Here is info on downloading Adobe applications: Help | Download, install, update, or uninstall apps
Does that help?
Thanks,
Kevin

New Install: dbca problem on ubuntu 10.04

Hello List,
I want to install Oracle 11gR2 on my Ubuntu box which is running 10.04 Lucid:
oracle@z2:~/oh$ cat /etc/issue
Ubuntu 10.04.1 LTS
oracle@z2:~/oh$ uname -a
Linux z2 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010 i686 GNU/Linux
The above command suggests to me that I am running 32bit Linux.
I downloaded the 32bit Oracle cdroms.
I read this link:
- http://www.pythian.com/news/13291/installing-oracle-11gr2-enterprise-edition-on-ubuntu-10-04-lucid-lynx/
I carefully followed the instructions there.
The instructions there are for 64 bit Linux. Like I said, my box is 32bit.
Here are the results of my libstdc++5 shoehorn-install:
oracle@z2:/usr/lib$ ll libstd*
lrwxrwxrwx 1 root root 18 2010-08-10 21:59 libstdc++.so.5 -> libstdc++.so.5.0.7
-rw-r--r-- 1 root root 737192 2010-08-10 21:58 libstdc++.so.5.0.7
lrwxrwxrwx 1 root root 19 2010-08-09 13:54 libstdc++.so.6 -> libstdc++.so.6.0.13
-rw-r--r-- 1 root root 975088 2010-03-26 15:43 libstdc++.so.6.0.13
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.5.0.7
libstdc++.so.5.0.7: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$ file libstdc++.so.6.0.13
libstdc++.so.6.0.13: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped
oracle@z2:/usr/lib$
oracle@z2:/usr/lib$
The instructions suggest that I install some debian packages.
Here are my results for that task:
root@z2:/oracle/downloads/database# apt-get install unzip build-essential x11-utils rpm ksh lsb-rpm libaio1
Reading package lists... Done
Building dependency tree
Reading state information... Done
unzip is already the newest version.
build-essential is already the newest version.
x11-utils is already the newest version.
rpm is already the newest version.
ksh is already the newest version.
lsb-rpm is already the newest version.
libaio1 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
The instructions described a software-only install so I did that.
I bumped into no problems.
After the install,
I added env vars to my .bashrc and got a new bash:
export ORACLE_BASE=/oracle/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=orcl
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
export PATH=$ORACLE_HOME/bin:$PATH
Then:
oracle@z2:~$ sqlplus /nolog
SQL*Plus: Release 11.2.0.1.0 Production on Sat Aug 14 18:03:00 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> exit
oracle@z2:~$ ln -s $ORACLE_HOME oh
oracle@z2:~$ ln -s $ORACLE_HOME 11gr2oh
oracle@z2:~$ cd oh
oracle@z2:~/oh$ OPatch/opatch lsinventory
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /oracle/app/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.6
OUI version : 11.2.0.1.0
OUI location : /oracle/app/oracle/product/11.2.0/dbhome_1/oui
Log file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2010-08-14_18-06-29PM.log
Patch history file: /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/lsinv/lsinventory2010-08-14_18-06-29PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
oracle@z2:~/oh$
So far so good.
oracle@z2:~/oh$
oracle@z2:~/oh$ which dbca
/oracle/app/oracle/product/11.2.0/dbhome_1/bin/dbca
Then I tried dbca and it bombed:
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb78476f3, pid=5883, tid=3077301952
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5883.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ env|sort
DISPLAY=localhost:10.0
HOME=/oracle
JAVA_HOME=/java/jdk16
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/lib:/lib:/usr/lib
ORACLE_BASE=/oracle/app/oracle
ORACLE_HOME=/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
PATH=/oracle/app/oracle/product/11.2.0/dbhome_1/bin:/java/jdk16/bin:/pt/jruby151/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/dan/bin:/pt/bin:.
SHELL=/bin/bash
TERM=dumb
USER=oracle
_=/usr/bin/env
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ unset JAVA_HOME
oracle@z2:~/oh$
oracle@z2:~/oh$ export LD_LIBRARY_PATH=${ORACLE_HOME}/lib
oracle@z2:~/oh$
oracle@z2:~/oh$ export PATH=${ORACLE_HOME}/bin:/usr/bin:/bin:/usr/sbin:/sbin
oracle@z2:~/oh$
oracle@z2:~/oh$ which java
/usr/bin/java
oracle@z2:~/oh$
oracle@z2:~/oh$ java -version
java version "1.6.0_18"
OpenJDK Runtime Environment (IcedTea6 1.8) (6b18-1.8-4ubuntu3)
OpenJDK Server VM (build 16.0-b13, mixed mode)
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ su
Password:
root@z2:/oracle/oh# mv /usr/bin/java /usr/bin/java16
root@z2:/oracle/oh#
root@z2:/oracle/oh# exit
oracle@z2:~/oh$ which java
oracle@z2:~/oh$
oracle@z2:~/oh$
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
# An error report file with more information is saved as hs_err_pid5953.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Aborted
oracle@z2:~/oh$
oracle@z2:~/oh$
I used these google keywords to search for clues:
google:
oracle ubuntu 10.04 dbca SIGSEGV ld-linux.so.2
I found no clues in Google.
So, I look for clues here.
Does anyone have any ideas on how do debug this error from dbca:
oracle@z2:~/oh$ dbca
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0xb785a6f3, pid=5953, tid=3077314240
# Java VM: Java HotSpot(TM) Server VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [ld-linux.so.2+0xd6f3]
??

I am running V11.2 on 64-bit Ubuntu
Below are some log files on my system.
You may be able to find similar ones on yours & they might contain additional clues.
/u01/app/oracle/product/11.2.0/dbhome_1/assistants/dbca/logs
/u01/app/oracle/cfgtoollogs/dbca
/u01/app/oracle/cfgtoollogs/dbca/v112
/u01/app/oracle/cfgtoollogs/dbca/v112/mkplug_v3_v112.log
/u01/app/oracle/cfgtoollogs/dbca/v112/tts_example_imp.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/rmanRestoreDatafiles.sql
/u01/app/oracle/cfgtoollogs/dbca/v112/trace.log
/u01/app/oracle/cfgtoollogs/dbca/v112/postScripts.log
/u01/app/oracle/cfgtoollogs/dbca/v112/OraDb11g_home1_v112_creation_checkpoint.xml
/u01/app/oracle/cfgtoollogs/dbca/v112/cloneDBCreation.log
/u01/app/oracle/cfgtoollogs/dbca/v112/CloneRmanRestore.log
/u01/app/oracle/cfgtoollogs/dbca/v112/lockAccount.log
/u01/app/oracle/cfgtoollogs/dbca/v112/emConfig.log
/u01/app/oracle/cfgtoollogs/dbca/trace.log_OraDb11g_home1
bcm@bcm-laptop:~$ uname -a
Linux bcm-laptop 2.6.32-24-generic #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 x86_64 GNU/Linux

New MBP wireless problems

Hi all, im sure you are all sick of reading the same problems time after time. Anyway, mine is as follows..
Got my new Mac around 1 month ago, love it. My old 17 mbp always sat at my desk and i usually run a wired connection to the internet. Now after i bought my new 15 mbp i bought a time capsule, great i thouht. Spent 4 days trying to set it up to no joy. It was being seen by 3 windows laptops, 2 iphones and 1 touch, but when i tried connecting via my mbp it kept saying connection time out. I tried it without a password and it would show i was connected with an "all black airport icon" but still would not go online.
Hence i brought it back and continued to use it wired to the internet from Netgear router. Now my girlfriend bought me an Airport Express. Brillant i thought, maybe this will work. Set it up to create a new wireless network from my router (im in a different building 40ft away) so i could turn my music studio wireless, have airtunes etc.
But of course NO! My iphone can see it and use the wireless network, but not my £1800 mbp! Sometimes it scans and does not even see the network. And if it does, it tries to connect and fails.
My brother who is a wiz at these things tried for 2 hours yesterday.His Sony pc connected ok, my iphone and again ipod touch, but still no from the MBP.
So i brought it into the house where the Netgear router is running and my MBP can connect no problems.
Is there something im missing?? Why can i not have the simpliest of things in the form of wireless internet?
Any help would be great, if you need more detail etc, ill be happy to go into detail!

I found the solution after many many many attemps.
It's not a MBP problem, it's your wireless router.
1- Set your BEACON between 20 and 50. D-LINK router for example use 100 has default value. It's too long.
2- Change your channel. D-link default is 6. Use whatever channel. I use 10.
Hope you enjoy!

New macbook pro problem, plz help

hey everyone.i just bought the new macbook pro last week, 15" i7core 2ghz. i am a very serious musician, and im going going to university next year to study music, the whole reason i bought this computer is for recording, all the musicians i know who are serious/professionals use macs. when i first turn on my computer everything is fine, but once i plug my guitar in through my zoom g2.1u pedal, garageband freezes and i have to force quit it, this just started happening within the past 2 days.for the first week i recorded with it fine. it was also happening yesterday without even plugging in my guitar at all. when this happens the internet also shuts down. when i open safari it doesnt say you are not conncted to the internet, it just has a blank white page. when this happens everything else isnt working right either, everything is slow and laggy. i paid alot of friggin money for this thing and i wanted to keep it clean the only things ive done to it were, i took some mp3, pdf and guitar pro files from my old windows xp onto my mac through a usb stick, downloaded a mp3 from online and set a cool backround as my desktop. I thought macs were supposed to be resilient? or do i just have a defective one. these problems are quite specific but if i cant use garageband/record with my mac theres not a rly a point of me having one.
i hope someone can help me out here.

Try here:
https://discussions.apple.com/community/ilife/garageband

Hi ! new os x problem

Similar Messages

Maybe you are looking for