Hi, new to apple and not super tech savy. I wish to move to apple for all office and home use. want the works. What and how is the best way to go about this?

After some guidence on setting up apple at home and syncing all devices etc, any help would be great. IT not my strenght

It really won't matter which device you use to purchase and download the rental, though if your computer has a wired connection to the Internet, it may be a bit less susceptible to problems than the iPad's Wifi connection. For instructions either way, see:
http://support.apple.com/kb/HT1390
Once the movie has completely downloaded, a network connection will then not be required.
Regards.

Similar Messages

  • We have always used one iTunes account and I want to crate a new account for my daughter.  What is the best way to go about this and will she need to download free apps again?

    We have always used one iTunes account and I want to crate a new account for my daughter.  What is the best way to go about this and will she need to download free apps again?

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • What's the best way to go about this scenario

    Folks,
    My application is composed of a lot of modules and each of these modules
    both in terms of presentation
    and functionality dynamically changes its behavior based on the context
    associated with the requests. Now I want to offer on top of this an
    Installer, thru which I can dynamically install new modules into my
    application (both presentation and functionality layers), without a need to
    re-start the server. And also install thru the same mechanism
    customizations, which again would require dynamically adding more
    configurations and components to the existing application modules.
    What would be the best way in your experience to do that for the weblogic
    server 6.1 environment?
    thanks,
    pdhoolia

    Hi,
    The best possible way is to create a virtual servers in iWS6.x and configure the same, like what you had with 4.1 instance(configuration).
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

  • Whats the best way to go about load balancing Exchange 2010 CAS

    My server guys want to LB the Exchange 2010 client access servers, this will be the 7th Context on my Ace 4710.
    see table for ports that are used
    Port
    Usage
    25
    smtp
    80
    http various
    110
    POP3 clients
    135
    RPC end point mapper
    143
    imap4 clients
    443
    SSL various
    993
    secure imap 4 clients
    995
    secure pop3 clients
    6001
    rpc related outlook anywhere
    6002
    rpc related outlook anywhere
    6003
    rpc related outlook anywhere
    60200
    rpc CAS
    60201
    exchange address book service
    whats the best way of going about this?
    do I just LB the IP addresses of the Servers and ignore the ports?
    do i have to do anything special for ports 993 and 995 secure imap and pop?
    I am sure there are more questions I shold be asking!

    OK
    so If I have a single serverfarm with all services do I filter on  the virtual
    address something like below?
    class-map match-any EXCH_vip
    match virtual-address 172.16.93.2 tcp eq 25
    match virtual-address 172.16.93.2 tcp eq 80
    match virtual-address 172.16.93.2 tcp eq 110
    match virtual-address 172.16.93.2 tcp eq 135
    match virtual-address 172.16.93.2 tcp eq 143
    match virtual-address 172.16.93.2 tcp eq 443
    match virtual-address 172.16.93.2 tcp eq 993
    match virtual-address 172.16.93.2 tcp eq 995
    match virtual-address 172.16.93.2 tcp eq 6001
    match virtual-address 172.16.93.2 tcp eq 6002
    match virtual-address 172.16.93.2 tcp eq 6003
    match virtual-address 172.16.93.2 tcp eq 60200
    match virtual-address 172.16.93.2 tcp eq 60201

  • HT5621 My husband and I both have iPhone 5. We currently share the same apple I'd. How do we get separate ones. Him keeping his and me getting a new one? What is the best way to go about doing this?

    My husband and I both have iPhone 5. We currently share the same apple I'd. How do we get separate ones. Him keeping his and me getting a new one? What is the best way to go about doing this?

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US

  • Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents)  What is the best way to go about doing this.  Also should a 2t hdd be partitioned.

    iMac with 256ssd and 2t hdd. Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents)  What is the best way to go about doing this.  Also should a 2t hdd be partitioned.

    Yes, you can move your user directories to the HD and keep your OSX and Applications on the SSD drive.
    Whether you partition your HD or not depends on how much data you have and how you propose to use your HD.
    Are you planning to use your iMac as a Time Machine backup volume? If so, partition it off.
    Do you have huge data files, eg video, music, photos?
    How much of your 2tb drive will be "free" once it is loaded with all your data?
    A little more information is required before the optimal configuration can be recommended for your use.

  • Hi I would like to totally reformat my Macbook Pro. What is the best way to go about it?

    I have a Macbook Pro and would like to do a complete reformat. I installed Moutain Lion when it came out and do not wish to pay again since I've already paid. I have OS 10.6.4 discs with me which didnt come with my MB but with my previous one. What is the best way to go about it? I have bootcamp and wish to get rid of it (one of the many reasons of wanting to reformat)
    Thanks

    You can use the Boot Camp Assistant to remove the Bootcamp Partition  - best way to do it.
    If you use the Recovery Disk Assistant to create a recovery usb thumbdrive you can boot to that and repartition the MacHd and reinstall the OS directly.
    When you purchase the OS you are free to reinstall without repurchasing as long as yo have access tot he Apple Id you used to make the purchase
    DL1433 - & - HT4848

  • What is the best way to go about getting a wireless connection on the go?

    Im new to the aple product. I just recently bought a New Macbook Pro and wanted to know what is the best way to go about connecting to the internet while not at home and on the go. I was thinking of maybe a USB internet stick. But dont know who provides them and who would be the best choose to go with for a nice price every month. If that was the best choose in the first place. Im living in the U.S.A so if you could help ill really apprecaite it. THANKS

    Hi! I'm writing in beginning of October so I don't know if you've found a solution.
    Your MacBook Pro probably has a WiFi card built in. You don't need to have a USB connector.
    Turn on AirPort, go to Network and choose the network that is available to you. It might ask for a password, so get it from the cashier. My MBP connects wherever I go, as long as there is a network available.
    Good luck.
    RS

  • I have 21,000  photos stored in iphoto. I have a WD 1.5TB backup external hard drive.  What is the best way to erase about half of my photos on my internal hard drive?

    I have 21,000  photos stored in iphoto. I have a WD 1.5TB backup external hard drive.  What is the best way to erase about half of my photos on my internal hard drive?

    Here's one way to do what you want:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    Now you have two full versions of the Library.
    3. On the Internal library, trash the Events you don't want there
    Now you have a full copy of the Library on the External and a smaller subset on the Internal
    Some Notes:
    As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
    You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    You can keep the Library on the external updated with new imports using iPhoto Library Manager

  • HT1430 If Lock/Sleep buttom is unresponsive what is the best way to go about trying to reset iPhone 4

    If Lock/Sleep buttom is unresponsive what is the best way to go about trying to reset iPhone 4

    You could go to settings/general/accessibility/assistive touch and get most of the functions of the sleep /wakebutton but you will not be able to reset that way.

  • What is the best way to learn about galaxie s3 from novice viewpoint?

    what is the best way to learn about galaxie s3 as a complete beginner?  nothing that is taken as a given by other discussions is known by me.  i instantly get lost.

    Do you already have the phone, or are you planning on getting the phone.
    You could sign up for a free workshop at one of your local Verizon stores. You could read the owners manual. You could peruse thru the topics on THIS Verizon site.
    I thought there was a thread which gave a bunch of tips/tricks for the GSIII, but I can't seem to find it. There IS one for the Galaxy Note II which MAY be helpful with the GSIII, though.

  • With all of the big changes that have gone on with Lion, surely it would have made sense for Apple to have provided how the new commands work? What is the best way to learn about how things have changed?

    Apple has tended in my expereince to provide intuitive software that users can grow to use and admire. Why then does Lion go off at a tangent and become unintuitive and just plain hard work to work out? I run a business and this has caused a lot of time consuming effort particularly when working out how to save files (in certain programs). Like so many products (iPhone being one), there is no guide to the great things that can be done and I just don't have the time to go fishing around online looking for tips and tricks when I've got clients who need things quickly.
    Where is the best place to learn about Mac things? 

    Take a look here: http://www.apple.com/macosx/whats-new/

  • Need an exchange for a HP f210 camcorder what is the best way to go about it

    My f210 camcorder will not lock a micro flash card in the drive portion of the camera.  It keeps popping out continuously.
    What is the best way to get this exchanged for another one.  I am hoping it does not need to be in the original packaging to get this done.

    You can use the Boot Camp Assistant to remove the Bootcamp Partition  - best way to do it.
    If you use the Recovery Disk Assistant to create a recovery usb thumbdrive you can boot to that and repartition the MacHd and reinstall the OS directly.
    When you purchase the OS you are free to reinstall without repurchasing as long as yo have access tot he Apple Id you used to make the purchase
    DL1433 - & - HT4848

  • Whats the best way to go about learning C?

    I'm an almost complete noob when it comes to programming. I did write a few simple pascal programs about 10 years ago at school, thats about it.
    What I hope to achieve is (hopefully) not that complex, but I'm not sure where to start learning. My reason for wanting to learn is this: I really love MOC (music on console) but I ended up wanting a GUI player which still worked without the mouse. Every one I tried just isnt a patch on MOC, IMO, or just has one or other feature that doesnt work without a mouse. So it occurred to me, I have the source code for all these GUI players and the source for MOC, perhaps I can "modify" MOC and create a GUI version, or alternatively write some kind of front end to MOC.
    So far, I have had a go with Glade and Anjuta IDE, but my knowledge of C being almost nonexistent is making things tough. I'm probably trying to do it wrong anyway, my thought was to create a GUI in glade and make it call functions from the moc source... :?:
    So I need a crash course in C programming with Glade (I think?) and I'm not sure what the best way to proceed is.
    Any tips on how best to learn? I ask here because you all seem to be the most knowledgable group I can think of

    I'm not trying to discourage you, but the idea of Frankensteining all that C source into your own custom GUI music player is likely to cause nothing but hours of frustration. C is a great language for system programming, but for most application software it's far too low level and for most beginners it's far too dangerous (it lets you do bad things that can kill your app in dozens of intersting and extremely hard to debug ways).
    What I would suggest is that you first off break the problem in half. Use a client/server approach. The server does all the low-level heavy lifting of decoding/decompressing the music files and sending them to your audio subsystem. Something like Music Player Daemon (MPD) is perfect for the server part and is specifically designed to be controlled by a separate client program.
    Then all you have to do is write the GUI client of your dreams. For that I would recommend something like Python plus the GUI library of your choosing (Qt, GTK, wxWidgets, etc. all have nice Python bindings). Python is a far easier beginner language than C and can do much more work with much less code. You'll spend less time mucking around looking for memory leaks and invalid pointer references and more time actually making your GUI do useful work Oh, and there just happens to be a Python MPD client library so the task of communicating with the server gets even easier.

  • What's the best way to pull off this guitar trick?

    I have a funky wah-wah guitar riff (about 5 seconds in length)and would like to have part of the riff play on the left speaker and the second half play on the right speaker—kind of flow between the two speakers organically. The riff was originally recorded in mono.
    What would be the best way to accomplish this effect? Automation and pan the signal in real time? Or double the recording on two different tracks and the cut it up and pan so one half plays on the each speaker for half of the time? Any other ideas or tricks?
    Basically, I’m just trying to get it to sound as “natural” as possible, if this makes any sense. I’m just curious how you guys would pull this off. Thanks for any tips.

    hi
    personally i'd do what you suggest: automate the pan of the gtr region/track.
    i'd either use one of my midi controller knobs - assign it to pan and then do it in realtime... or just draw in the pan automation and play around with the nodes of the automation and smooth them out with the curve tool...
    you could also use something like the stereo spread plugin and the tremolo and automate the later (depends on the rate of panning you want and the effect)
    or use a pan plugin....i think destroyfx had one - but i can't find it now - something like autopan....which you can sync to the bpm.
    hope that helps
    rounik

Maybe you are looking for