Hi NO SIM message coming frequently in iphone5 with ios 8.1.1

Hi NO SIM message coming frequently in iphone5 with ios 8.1.1.I have reset the network setting,SIM remove & Insert again then carrier appear but after sometime (may be 1 hr,3 hrs),same problem comes again.

Hello brajeshchandra79,
Good job on troubleshooting your issue with No SIM on your iPhone. The last few steps would be to restore your iPhone. If that does not help, then the next step would be to contact Apple for additional support. 
If you see 'No SIM' alert on iPhone
http://support.apple.com/en-us/HT201420
Take care,
-Norm G. 

Similar Messages

  • How do i unlock my Sprint iphone5 with IOS 7.4 0 to use any network here in the U S?

    How can i unlock my Sprint iphone5 with IOS 7.4.0 to be compartable with other service providers here in the U S?

    You can't. Sprint phones can be unlocked ONLY for use on non US carriers. They can not be used on any US carrier other than Sprint. If you want to use a different carrier in the US, sell the phone and buy one you can use.

  • How to forward received messages in my iphone 4s with ios.7.04

    How to forward received messages in my iphone 4s with ios.7.04

    There is no way that I've found other than to copy & paste.

  • Hello. I m Harminder Singh from punjab. Currently i m using iphone5 with ios 6. 1     .bt now i want to upgrade it to ios 7.  I want to know that can i upgrade it now. If yes then pls help me how can i upgrade at home

    Hello. I m Harminder Singh from punjab. Currently i m using iphone5 with ios 6. 1     .bt now i want to upgrade it to ios 7.  I want to know that can i upgrade it now. If yes then pls help me how can i upgrade at home

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

    I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

    Many people are having probalems with this right now.  The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591.  This only works if you still have access to your old email account.  If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

  • I updated my iPhone5 with iOS 7

    I updated my iPhone5 with iOS7 & now I can't get any new emails.

    Hi, ckhunter7. 
    Thank you for visiting Apple Support Communities.
    Here is an article that you might find helpful when troubleshooting this issue. 
    iOS: Unable to send or receive email
    http://support.apple.com/kb/ts3899
    Cheers,
    Jason H. 

  • IPhone5 with ios 6.1.2 uses cellular data when connected to wifi.  Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off.  Running on AT&T cellular network.

    I have 3 iPhone5's with ios 6.1.2 that user cellular data when connected to wifi.  Every hour to the minute even when no apps are running, iCloud is off, Ads are off, Diagnostics are off.  Running on AT&T cellular network. 
    Date Time To/From
    Type
    Direction
    Msg/KB
    03/14
    01:30 PM
    phone
    Internet/MEdia Net
    Sent
    78 KB
    03/14
    01:02 PM
    phone
    Internet/MEdia Net
    Sent
    4397 KB
    03/14
    12:48 PM
    phone
    Internet/MEdia Net
    Sent
    19520 KB
    03/14
    12:30 PM
    phone
    Internet/MEdia Net
    Sent
    19503 KB
    03/14
    11:30 AM
    phone
    Internet/MEdia Net
    Sent
    2427 KB
    03/14
    10:30 AM
    phone
    Internet/MEdia Net
    Sent
    359 KB
    03/14
    09:30 AM
    phone
    Internet/MEdia Net
    Sent
    1396 KB
    03/14
    09:25 AM
    phone
    Internet/MEdia Net
    Sent
    1 KB
    03/14
    08:25 AM
    phone
    Internet/MEdia Net
    Sent
    30 KB
    03/14
    07:25 AM
    phone
    Internet/MEdia Net
    Sent
    16 KB
    03/14
    06:25 AM
    phone
    Internet/MEdia Net
    Sent
    45 KB
    03/14
    05:25 AM
    phone
    Internet/MEdia Net
    Sent
    15 KB
    03/14
    04:25 AM
    phone
    Internet/MEdia Net
    Sent
    14 KB
    03/14
    03:25 AM
    phone
    Internet/MEdia Net
    Sent
    21 KB
    03/14
    02:25 AM
    phone
    Internet/MEdia Net
    Sent
    23 KB
    03/14
    01:25 AM
    phone
    Internet/MEdia Net
    Sent
    16 KB
    03/14
    12:25 AM
    phone
    Internet/MEdia Net
    Sent
    23 KB

    Hello All Who Read This!
    I just bought an iPhone 5 on the 21st of March. I ate through 850 MB's in 12 days. I read up on the issue of data consumption looking for tips to conserve data. I did not know there was a problem.
    This morning I found out that I was leaking data very little, but daily it accumulates. I am in Barcelona, Spain. I do not have a contract, I am on a prepaid Yoigo carrier.
    I happened upon an article/blog by Robert Parks at snnyc.com "problems persist in ios 6.1.2.".
    Although his situation did not relate to me, I tried a few tests on my own to see if I could stop the data leak without turning off my celular data and possibly push notifications, I think I found a solution that might help someone:
    In ios 6.1.3 goto Settings/Mail, Contacts,Calenders and scroll down to Calendars and turn off " New Invitation Alerts" and also turn off "Shared Calendar Alerts".
    My Cellular Network Data seems to be behaving. I only see a change in MB used when I open an ap that uses data.
    All The Best

  • Anyone notice iMessanger and regular messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s with IOS 7

    anyone notice iMessanger and regular phone messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s w/32 GB RAM and also ipad 4th generation 64GB memory. I have not updated either device with IOS 8 - they are both on IOS 7

    anyone notice iMessanger and regular phone messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s w/32 GB RAM and also ipad 4th generation 64GB memory. I have not updated either device with IOS 8 - they are both on IOS 7

  • I can't delete a single conversation from a message, i have to delete all the message. It only happend with IOS 8.

    WHen I updated my IPhone 5s to IOS 8 I can't delete some of the conversations, i have to delete all message.

    You cannot currently do this at all.
    It is all or nothing.
    Reportedly this will be a feature of ios 5.

  • How do I remove this 3.7GB of messages stored on my phone with iOS 7?

    For a while, I've noticed that my "other" category in iTunes on my iPhone 4S has been very, very large...about 5GB of space on my phone wasted because of all this "other" space being taken up. I never could figure out what it was. When I updated to iOS 7, it split the other space into 2 categories. Now "other" only takes up 1.28, while "Documents and Data" take up to 3.81GB of data.
    I looked under the usage on my phone, and saw that "saved messages" takes up 3.7GB of space. I deleted all of my messages and rebooted, but it still stays at 3.7. I did some reading and found out that these "saved messages" are every single message, picture, video, etc. I have ever sent in the 10 months I've owned my phone. They are backed up and stored somewhere on my phone, and I have no idea how to remove them.
    I've tried removing messages from spotlight search and rebooting but to no avail. I don't want to restart my phone from scratch, because I will lose over 900 contacts, notes, Wi-fi networks, etc. Does anybody know where these messages are stored on the phone and how I remove them? They are useless and if this keeps up, by the time my contact expires all the space on my phone will be taken up by useless archived messages that I can't even access.

    Snowden has already commented on this. Messages are stored on Apple devices until they are uploaded for screening to the NSA. Apple holds these messages on your device and on the cloud service. Once the information has been uploaded to NSA, the messages then delete off your device. In order to not arouse suspecion, the device will always show you some amount to data as space being occupied on your device. Theorecically this data could be over written and not protected if they were on hidden sectors of your memory. The information stored on this "messages" partition is actually more than messages, thats why this space commitment can easily reach 3 gigs. Any computer science specialist will tell you that ASCII characters only use minimal kilobytes of data. Apple complies with this request to upload your personal data as outlined in the Patriot Act. The only way to delete this "messages" data hold is by doing a complete wipe of your device and not conducting a restore. It will clear the space off your device, but NSA actually has the information from the cloud service regardless.

  • Error message in logs on ASR903 with IOS XE 3.9.0

    Hi all,
    I have the following error message in logs on our ASR903 running IOS XE 3.9.0 :
    Jul 10 10:01:34.273 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 0
    Jul 10 10:03:58.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:11.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:18.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 10:04:26.281 EET: %IOMD_IMFPGA-3-MDIO_READ: SIP1: iomd:  An MDIO read has failed for addr: 0 reg: 1
    Jul 10 11:46:16.627 EET: %IOMD_IMFPGA-3-MDIO_WRITE: SIP1: iomd:  An MDIO write has failed for addr: 0 reg: 1f data: 204
    Any idea what this message could mean and if there is any workaround?
    I found a BUG but it's not well documented :
    CSCuf05039
    Symptom: I2C-WRITE and MDIO_READ error messages are displayed on the Cisco ASR903 router.
    Conditions: This issue occurs after an interface module hard or soft OIR is performed.
    Workaround: There is no workaround.
    show platform    
    Chassis type: ASR-903            
    Slot      Type                State                 Insert time (ago)
    0/0      A900-IMA1X          ok                    5d02h        
    0/1      A900-IMA1X          ok                    5d02h        
    0/2      A900-IMA8S          ok                    5d02h        
    0/3      A900-IMA8S          ok                    5d02h        
    0/4      A900-IMA8S          ok                    5d02h        
    0/5      A900-IMA8S          ok                    5d02h        
    R0        A903-RSP1B-55       ok, active            5d02h        
    R1        A903-RSP1B-55       ok, standby           5d02h        
    F0                            ok, active            5d02h        
    F1                            ok, standby           5d02h        
    P0        A900-PWR550-D       ok                    5d02h        
    P1        A900-PWR550-D       ok                    5d02h        
    P2        A903-FAN            ok                    5d02h        
    Slot      CPLD Version        Firmware Version                       
    R0        11102133            15.3(2r)S                          
    R1        11102133            15.3(2r)S                          
    F0        11102133            15.3(2r)S                          
    F1        11102133            15.3(2r)S           
    show platform diag
    Chassis type: ASR-903            
    Slot: 0, A903-RSP1B-55      
      Running state               : ok
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:03:04 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Sub-slot: 0/0, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/1, A900-IMA1X
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/2, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:02 (5d02h ago)
      Logical insert detect time  : 00:04:02 (5d02h ago)
    Sub-slot: 0/3, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:05 (5d02h ago)
      Logical insert detect time  : 00:04:05 (5d02h ago)
    Sub-slot: 0/4, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:10 (5d02h ago)
      Logical insert detect time  : 00:04:10 (5d02h ago)
    Sub-slot: 0/5, A900-IMA8S
      Operational status          : ok
      Internal state              : inserted
      Physical insert detect time : 00:04:21 (5d02h ago)
      Logical insert detect time  : 00:04:21 (5d02h ago)
    Slot: 1, A903-RSP1B-55      
      Running state               : unknown
      Internal state              : offline
      Internal operational state  : unknown
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:00:00 (never ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R0, A903-RSP1B-55      
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:01:47 (5d02h ago)
      Became HA Active time       : 00:07:08 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: R1, A903-RSP1B-55      
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:12 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F0,
      Running state               : ok, active
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:02:49 (5d02h ago)
      Hardware ready signal time  : 00:02:41 (5d02h ago)
      Packet ready signal time    : 00:04:42 (5d02h ago)
      Became HA Active time       : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: F1,
      Running state               : ok, standby
      Internal state              : online
      Internal operational state  : ok
      Physical insert detect time : 00:01:47 (5d02h ago)
      Software declared up time   : 00:04:21 (5d02h ago)
      Hardware ready signal time  : 00:04:20 (5d02h ago)
      Packet ready signal time    : 00:05:56 (5d02h ago)
      CPLD version                : 11102133
      Firmware version            : 15.3(2r)S
    Slot: P0, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:48 (5d02h ago)
    Slot: P1, A900-PWR550-D
      State                       : ok
      Physical insert detect time : 00:02:46 (5d02h ago)
    Slot: P2, A903-FAN
      State                       : ok
      Physical insert detect time : 00:02:47 (5d02h ago)
    Thanks,
    Robert

    Hi Reza,
    Thanks for your reply...yes lldp is enabled...and so far we did:
    - Reapply voice-vlan configuration
    - Disable/Enable LLDP
    - Reboot the Switch
    - Reset the Phones
    ... and only if we do "debug lldp" then it is working...strange

  • IPhone5 with ios 7.1

    Initially I received message on my phone to upgrade to later version Ios.
    I have currently no access to WiFi
    So connected to iTunes (latest version)
    iTunes also said need to upgrade the phone
    It started downloading and said it was installing a version IOS 7.0.6
    Then stopped saying, cannot upgrade the phone.
    Only then did I realise that my phone already indicated it has ios 7.1
    Q1. If 7.1 is the latest version correctly on my phone, what do I do with the indication on the phone that says it needs an upgrade?
    Q2. How do I upgrade the phone using iTunes, to latest 7.1+, or whatever is the upgrade since? (If iTunes doesn't know what to upgrade to?)
    Thank you
    Bob

    Well, after 3 more tries, it eventually did work.
    And I found out my IOS version was in fact 5.0.6 trying to upgrade to 7.1
    Sorry to have wasted some people's time just reading my question.
    All's good now.  Rgds
    Bob

  • Messages Not Syncing across devices with iOS 8

    Hi all,
    Since December 2014 and an update at that time my iMessages stopped syncing correctly.
    Some messages sync some don't.
    I send from my iPhone5c and it doesn't show up on my iPadAir.
    Reply will go to my iPadAir  and not to my iPhone5c
    If one of my devices is off then no messages will go to it and it won't sync once turned back on.
    I have done the: turn off iMessages, quit program, turn off devices. Restart and turn on iMessages again on devices. This hasn't fixed the issue.
    My number and emails are all correct on devices. I am logged in on devices. They just adhocly sync.
    Any other ideas?

    They are received normally for me and everyone I know using 8.3.  Are you using WiFi or cellular data? Has these devices ever been hacked/jailbroken, at any time?
    If not, try these steps as needed:
    Reset: press both home and lock buttons for at least 10 seconds, releasing when the Apple logo appears
    Settings > General > Reset > Reset All Settings
    Restore to factory settings using iTunes, also restoring a backup
    Restore to factory settings as new, without using a backup
    Use iTunes to restore your iOS device to factory settings

  • On iPhone5 with iOS 8.0.2 gives strange storage behaviour

    I have an iPhone 5 with iOS 8.0.2 and something strange has happened to my storage in the phone.
    Had 4.5 GB free when I upgraded from iOS7 to iOS8, after that I have only un-installed apps - not installed any new ones. Today I have 1.8 GB left in storage, but that number is changing all the time. I had 300 MB less space when I woke up this morning compared to when I went to bed. The only thing that has happened during that time is that I have had a normal charger connected to it.
    My storage also changes throughout the day with several 100 MB in differenence without me doing anything.
    Also, I have 1 GB of pictures in my photo stream, but I can't access and view them from my iPhone. I have to use my iPad to see them.
    Anybody have similar issues and problems with the iPhone storage after upgrading to iOS8?
    Note: I have added 200 GB iCloud Drive storage - but that should not affect the internal storage in the phone.

    I tried an online chat with Audi of America and I got back this URL in response:
    http://audi-intelligence.com/bluetooth/prod/
    Apparently it's still being qualified and they need to see if a firmware update will be needed... so unfortunately get ready for some rounds of finger pointing while the dust settles.

  • Maps app on iPhone5 with iOS 7.1 is not announcing directions with sound turned on

    My Maps app has stopped announcing directions. iPhone 5, iOS 7.1 with latest updates. Location services is turned on. Sounds are turned on. Volume is set to Loud in the Maps app. Cellular Data is turned on for Maps. I tried resetting my phone per the instructions online and nothing has helped so far. Any ideas?

    After much trial and error I finally figured this out. It has to do with the starting location. The starting location must be "Current Location" in order for Maps to announce turn-by-turn directions. In other words you have to start by entering your destination address, and then select "directions to here", which sets the from location to "current location". I had dropped a pin on my home, which is the same starting address as "current location", so should have given me the same result, but for some reason when you type in the actual address of your current location for the starting location, it does not activate the voice control for turn-by-turn navigation. I have tried this two or three times and every time when I enter the starting location, Maps does not announce directions, but when I let it calculate my current location it does. Even when location services are turned on for Maps in both cases. Can't understand the logic here or why Aplle would program it this way, but it is what it is. If anyone else is having this issue, I hope this helps.

Maybe you are looking for

  • Camera frame grabber to laptop

    Hi everyone, I am using a frame grabber connect a camera to a laptop. The camera is Dalsa Piranha2 linescan, it is said that programmable integration time, line scan rate,... and there are commands for this through serial port. Can you show me how to

  • Footage pauses when capturing

    The problem I'm having is that as i'm capturing from my Panasonic DVX 100 to FCP 4.5 the footage is intermitently pausing, but not on the camera, just as it's downloading, also it's just the video pausing the audio continues to play unaffected, howev

  • Migrate Oracle Apps Instance from one server to another

    Hi All, We are planning on migrating our Production Oracle Apps Instance(11.5.10.2 and 9.2.0.8) on HP Tru64 UNIX OS on one server to a different server(Node name change) with the same OS. This is a single node, single OS user instance(Apps and DB on

  • Repeat loop in filemaker Pro 7 database

    How can I get my script to loop through a large FM database of records and change the data in a particular field as in the script below? I cannot figure out the syntax for the repeat loop... with timeout of "3000" seconds tell application "FileMaker

  • What is this element/feature?

    Hi all, What is the "Format 0" box above?  Not asking specifics, but generalities.  When you click on it, it expands like below.  I would like to make CPHA an input to this function (i.e. provided from the front panel).  Haven't run across something