Hi, not network, not connected hard, not work wi-fi or other name? i dont know

hi, not network, not connected hard, not work wi-fi or other name? i dont know, please what name other network?
Thank you!

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

Similar Messages

  • HT5569 I have a ipod touch and it has updated the device and is asking me to join a net work and it does not show any net works and ony has other but i dont know any networks so what do \i do

    I have a Ipod touch and am un sure how to connect to wi fi it is asking me to connect to other but I dont know any so what do I put in there
    cheers

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

    I just bought an iPad mini and installed Facebook. NOT working. Only messages, but sporadically. Anyone know what's the deal?

    Weird... Turned the iPad off and back on, while waiting on the line to be connected to an apple support specialist, now it works.

  • My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    My home button is not working sometimes and at the store they dont want to take it for repair because the problem did not show up at that time

    When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
    You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

  • My webcam is not working for skype and other appli...

    Hello,
    My webcam is not working for skype and other applications i have used tinychat and tango..i have updated all version of skype as you said in other topics but all of them is not working for me...my device name is vimicro usb 2.0 and i have accidently deleted that device now i have installed that device again but its not working i have seen all topics please help me  ...
    i will be very thankful to you

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.

    GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual

  • HT1267 I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my Ne

    Hi there,
    I bought My Iphone 4s from Iran, I need to make an Apple Id but Iran is not in the registered countries?! I dont know what to choose? Also From Iran we do not have Credit card facility for payment option?!! Any idea how I can get FREE APPS on my New Phon?!!
    Please let me know how I can get this sorted as soon as possible!! Thank you very much

    You can create an Apple ID without a credit card, see this article:
    Create an iTunes App Store account without a credit card
    Check this post about iPhones from Iran:
    Re: Why Apple does not support from Iran? And why not open a store in Iran?

  • HT1695 Hi. I just bought new Ipad Mini. I don't have network to connect to. Its my first owning one i don't know how to set it up. Help...

    Hi. I just bought new Ipad Mini. I don't have network to connect to. Its my first owning one i don't know how to set it up. Help...

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • WSUS 3.0 SP2 on Server 2008 R2 not working (no console or other access)

    Hi,
    In a brand new network with all 2008 R2 servers I setup WSUS. Initially I could not install the role from the Roles tool in Windows and had to install it from a downloaded file from Microsoft (which I later read is due to 2008 R2).
    This ran fine for about 2 weeks, I had all the clients and workstations in groups, approving updates and installing them.. all tickety boo and then one day the console wont connect and I have not been able to get back into WSUS to do anything. I tried removing
    and re-installing WSUS (both keeping the local database and then deleting it the second time) but nothing helps. My event log reports the following every 6 hours:
    Event ID 13042 - Self-update is not working
    Event ID 12002 - The reporting web service is not working
    Event ID 12012 - The API Remoting Web Service is not working
    Event ID 12032 - The Server Synchronization Web Service is not working
    Event ID 12022 - The Client Web Service is not working
    Event ID 12042 - The SimpleAuth Web Service is not working
    Event ID 12052 - The DSS Authentication Web Service is not working
    Some extra points based on what I have read:
    The server DOES have .net 4.0 installed
    WSUS has been removed and re-installed
    All servers are 2008 R2
    The server also runs Remote Desktop Services.. but aside from this is just a file and print server
    Because this server (and the whole network) are brand new, standard practice is to run WSUS against the Microsoft update site and install all critical and optional updates and patches and etc..
    While it was working, I can't recall installing anything that may have broken it, however typically Windows patches do not cause problems on our machines, so I do not pay too close attention to what gets installed.. Perhaps one of these updates broke WSUS?
    Can anyone offer some suggestions for how to troubleshoot this and try get things moving again?
    Thanks!

    Hi,
    > then one day the console wont connect and I have not been able to get back into WSUS to do anything.
    Any error message when you launch WSUS console?
    You mentioned you have Kaspersky Endpoint Security software installed on WSUS server, have you configured antivirus software to exclude WSUS content directory?
    If you cannot access the WSUS console and a timeout error message appears, the CPU of the WSUS server may be at, or very close to, maximum utilization, which causes the database software to time out. If the database software times out, the WSUS console cannot
    be displayed.
    One way of inadvertently overtaxing your WSUS server is to have antivirus software monitor the WSUS content directory. During synchronization, the antivirus software can overload the CPU.
    Please ignore WSUS content in your antivirus software and check the result.
    For more information please refer to following MS articles:
    Issues with the WSUS 3.0 SP2 Administration Console
    http://technet.microsoft.com/en-us/library/dd939877(v=WS.10).aspx
    The DSS Authentication Web Service is not working.
    http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/c901eb7b-7c20-4fb8-87dd-93f128ec8703
    WSUS web services not working
    http://social.technet.microsoft.com/Forums/en/winserverwsus/thread/5b443a1c-01eb-4b73-ad06-03700032bec2
    Lawrence
    TechNet Community Support

  • Swf not working when moved to other folder....

    Hi all...
    i have created a simple flex project that does not use any server technology...  i have then used acitonscript to dynamically set up my end points and channels for a simple remote object which calls a java class on a tomcat local server.
    all works as it should.
    the folder that contains my swf in on my desktop.  If i was to copy the folder and move it to another location... the program does not work.?
    I want to able to create a swf that can work anywhere on the local machine.
    and to be extra awkward... i dont want to use air
    any ideas?

    Hi greg..
    thanks for your help...
    ive tried it with -use-network=true. but i am not having any luck.
    when i tried -use-network=false i get an error :
    SecurityError: Error #2010: Local-with-filesystem SWF files are not permitted to use sockets.
    at flash.net::Socket/internalConnect()
    at flash.net::Socket/connect()
    at mx.netmon::NetworkMonitorImpl()[/ndepot/ide_builder/ActionscriptProjects/src/mx/netmon/Ne tworkMonitorImpl.as:79]
    at mx.netmon::NetworkMonitorImpl$/init()[/ndepot/ide_builder/ActionscriptProjects/src/mx/net mon/NetworkMonitorImpl.as:30]
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::docFrameHandler()[E:\dev\beta1\frameworks\proj ects\framework\src\mx\managers\SystemManager.as:3394]
    at mx.managers::SystemManager/docFrameListener()[E:\dev\beta1\frameworks\projects\framework\ src\mx\managers\SystemManager.as:3258]

  • Wake on Demand: Not working for some services, others OK

    I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
    While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
    I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
    Any thoughts... hints... suggestions?
    One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
    Thanks in advance.

    I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

  • Please is an emergenci!!! I put my iPhone 5 to charge and the cable is not working I tried in other pluggers in the house but nothing I don't know what's wrong and I don't have any more battery

    Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?

    @whimsei,
    Hello and thank you for posting back.  What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
    To fix this it would have to be opened up and the connections checked.  If there is an issue with the cable then it would have to be replaced.  This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
    Here is the link to the maintenance and service guide.  If you feel comfortable doing the work it will help you.
    HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
    Maintenance and Service Guide
    If you want to send it in for repair here is how.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Please let me know how things go.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Cursor arrow gone from solid black to having white lines go through it and trackpad is not working properly in mail and adobe acrobat - anyone know how this could have happened and how to solve it?

    Can anyone help me?  Concerned that I may have some kind of malware.  My cursor arrow and trackpad are behaving strangely,  The cursor used to be a solid black arrow but now seems to have horizontal white lines running through it.  The trackpad does not function normally either.  For example, when I use my trackpad to scroll up and down in mail  it sometimes works and sometimes does not.  In adobe acrobat it sometimes does not work.  In facebook, the cursor does not line up behind the menu keys as it should.
    Any one know how this might have happened and how I can stop it?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Button not working...and I don't even know why

    I have this on frame 1:
    //FRAME NUMBER//
    slidenumber_txt.text = currentFrame + " de " + totalFrames;Object(this).
    //BUTTONVISBILITY//
    a_btn.visible = true;
    b_btn.visible = true;
    c_btn.visible = true;
    d_btn.visible = false;
    e_btn.visible = false;
    f_btn.visible = true;
    g_btn.visible = true;
    i_btn.visible = true;
    j_btn.visible = true;
    k_btn.visible = false;
    l_btn.visible = false;
    h_btn1a.visible = true;
    h_btn1a.setStyle("icon", iconh);
    h_btn1a.addEventListener(MouseEvent.ROLL_OVER, fh_btnro);
    function fh_btnro(e:MouseEvent):void{button_txt.text = "Interacción";}
    h_btn1a.addEventListener(MouseEvent.ROLL_OUT, fbtnrout);
    h_btn1a.addEventListener(MouseEvent.CLICK, fbtnclickh1a);
    function fbtnclickh1a(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/interactions/interaction1a.swf"));
    function fbtnclicki(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/documents/document1a.swf"));
    function fbtnclickf(e:MouseEvent):void{
    var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/sounds/audioplayer1a.swf"));
    function fbtnclickj(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/videos/video1a.swf"));
    function fbtnclickk(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/tests/test1a.swf"));
    And this on frame 2:
    slidenumber_txt.text = currentFrame + " de " + totalFrames;
    a_btn.visible = true;
    b_btn.visible = true;
    c_btn.visible = true;
    d_btn.visible = true;
    e_btn.visible = true;
    f_btn.visible = true;
    g_btn.visible = true;
    i_btn.visible = true;
    j_btn.visible = false;
    k_btn.visible = false;
    l_btn.visible = false;
    h_btn1b.visible = true;
    h_btn1b.setStyle("icon", iconh);
    h_btn1b.addEventListener(MouseEvent.ROLL_OVER, fh_btnro1b);
    function fh_btnro1b(e:MouseEvent):void{button_txt.text = "Interacción";}
    h_btn1b.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    Object(this).h_btn1b.addEventListener(MouseEvent.CLICK, fbtnclickh1b);
    function fbtnclickh1b(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("lesson1/interactions/interaction1b.swf"));
    I also have this on another layer:
    import flash.events.MouseEvent;
    import fl.transitions.Tween;
    import fl.transitions.easing.*;
    import fl.transitions.TweenEvent;
    stop();
    //STAGE//
    stage.displayState=StageDisplayState.FULL_SCREEN;
    //CUSTOM MENU//
    var custom_menu:ContextMenu = new ContextMenu();
    custom_menu.hideBuiltInItems();
    var option1 = new ContextMenuItem("© Copyright 2012 Jeje Designs All rights reserved");
    var option2 = new ContextMenuItem("+1 787.272.5059 | [email protected]");
    var option3 = new ContextMenuItem("Project Title: Presentation System 1.0 Build 1 Release 1 | 01032012");
    var option4 = new ContextMenuItem("Devigner: Edwin Merced | [email protected]");
    var option5 = new ContextMenuItem("Security Access");
    option5.enabled = false;
    option5.separatorBefore = true;
    custom_menu.customItems.push(option1, option2, option3, option4, option5);
    contextMenu = custom_menu;
    //NAVIGATION//
    a_btn.setStyle("icon", icona);
    b_btn.setStyle("icon", iconb);
    c_btn.setStyle("icon", iconc);
    d_btn.setStyle("icon", icond);
    e_btn.setStyle("icon", icone);
    f_btn.setStyle("icon", iconf);
    g_btn.setStyle("icon", icong);
    i_btn.setStyle("icon", iconi);
    j_btn.setStyle("icon", iconj);
    k_btn.setStyle("icon", iconk);
    l_btn.setStyle("icon", iconl);
    a_btn.addEventListener(MouseEvent.ROLL_OVER, fa_btnro, false, 0, true);
    b_btn.addEventListener(MouseEvent.ROLL_OVER, fb_btnro, false, 0, true);
    c_btn.addEventListener(MouseEvent.ROLL_OVER, fc_btnro, false, 0, true);
    d_btn.addEventListener(MouseEvent.ROLL_OVER, fd_btnro, false, 0, true);
    e_btn.addEventListener(MouseEvent.ROLL_OVER, fe_btnro, false, 0, true);
    f_btn.addEventListener(MouseEvent.ROLL_OVER, ff_btnro, false, 0, true);
    g_btn.addEventListener(MouseEvent.ROLL_OVER, fg_btnro, false, 0, true);
    i_btn.addEventListener(MouseEvent.ROLL_OVER, fi_btnro, false, 0, true);
    j_btn.addEventListener(MouseEvent.ROLL_OVER, fj_btnro, false, 0, true);
    k_btn.addEventListener(MouseEvent.ROLL_OVER, fk_btnro, false, 0, true);
    l_btn.addEventListener(MouseEvent.ROLL_OVER, fl_btnro, false, 0, true);
    a_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    b_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    c_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    d_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    e_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    f_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    g_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    i_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    j_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    k_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    l_btn.addEventListener(MouseEvent.ROLL_OUT, fbtnrout, false, 0, true);
    a_btn.addEventListener(MouseEvent.CLICK, fbtnclicka, false, 0, true);
    b_btn.addEventListener(MouseEvent.CLICK, fbtnclickb, false, 0, true);
    c_btn.addEventListener(MouseEvent.CLICK, fbtnclickc, false, 0, true);
    d_btn.addEventListener(MouseEvent.CLICK, fbtnclickd, false, 0, true);
    e_btn.addEventListener(MouseEvent.CLICK, fbtnclicke, false, 0, true);
    f_btn.addEventListener(MouseEvent.CLICK, fbtnclickf, false, 0, true);
    g_btn.addEventListener(MouseEvent.CLICK, fbtnclickg, false, 0, true);
    i_btn.addEventListener(MouseEvent.CLICK, fbtnclicki, false, 0, true);
    j_btn.addEventListener(MouseEvent.CLICK, fbtnclickj, false, 0, true);
    k_btn.addEventListener(MouseEvent.CLICK, fbtnclickk, false, 0, true);
    l_btn.addEventListener(MouseEvent.CLICK, fbtnclickl, false, 0, true);
    function fa_btnro(e:MouseEvent):void{button_txt.text = "Salida";}
    function fb_btnro(e:MouseEvent):void{button_txt.text = "Final";}
    function fc_btnro(e:MouseEvent):void{button_txt.text = "Siguiente";}
    function fd_btnro(e:MouseEvent):void{button_txt.text = "Anterior";}
    function fe_btnro(e:MouseEvent):void{button_txt.text = "Inicio";}
    function ff_btnro(e:MouseEvent):void{button_txt.text = "Audio";}
    function fg_btnro(e:MouseEvent):void{button_txt.text = "Glosario";}
    function fi_btnro(e:MouseEvent):void{button_txt.text = "Lectura";}
    function fj_btnro(e:MouseEvent):void{button_txt.text = "Video";}
    function fk_btnro(e:MouseEvent):void{button_txt.text = "Prueba";}
    function fl_btnro(e:MouseEvent):void{button_txt.text = "Button L";}
    function fbtnrout(e:MouseEvent):void{button_txt.text = " ";}
    function fbtnclicka(e:MouseEvent):void{var mc:lessonexit_mc=new lessonexit_mc();
    mc.x=479;
    mc.y=290;
    addChild(mc);}
    function fbtnclickb(e:MouseEvent):void{gotoAndStop("lastframe");}
    function fbtnclickc(e:MouseEvent):void{nextFrame();}
    function fbtnclickd(e:MouseEvent):void{prevFrame();}
    function fbtnclicke(e:MouseEvent):void{gotoAndStop("firstframe");}
    /*function fbtnclickf(e:MouseEvent):void{var mc:audioplayer_mc=new audioplayer_mc();
    mc.x=751;
    mc.y=141;
    addChild(mc);;}*/
    function fbtnclickg(e:MouseEvent):void{
        var loadera = new Loader();
        addChild(loadera);
        loadera.load(new URLRequest("glossary/glossary.swf"));
    //function fbtnclickh(e:MouseEvent):void{}
    /*function fbtnclicki(e:MouseEvent):void{button_txt.text = "I";}*/
    /*function fbtnclickj(e:MouseEvent):void{button_txt.text = "J";}*/
    /*function fbtnclickk(e:MouseEvent):void{button_txt.text = "K";}*/
    function fbtnclickl(e:MouseEvent):void{button_txt.text = "L";}
    Button h_btn1b does not work....I wonder why?

    Do you get any error messages? 
    Try putting traces in the h_btn_1b function to see if it is working.
    If h_btn_1b is in a frame adjacent to h_btn_1a and they are the same symbol, it is possible that b has been converted to a.

  • Yosemite dictation not working in safari and others

    I was using dictation in all apps until recently. now it only works in Mail. I've tried turning it off, restart, on, restart. Not working. Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try to start Dictation in app where it doesn't work. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Maybe you are looking for