Hi not off my apple ipad do not appear to be seen by my itunes either wirelessly or hardwire. My B
In ITnes on my PC I have the icon which allowed me to play itunes from my PC or my IPOD docking station or both. I think I clicked on something and the icon has disappeared and now neither the PC nor the docking station will pick up the ipod or iphone. Both appear not to be able to find the Apple devices. I reset the B&W docking station and even hardwired the ipad to the PC but still no joy. Running the diagnostic tools via help in itunes it says there are no ipad or iphones found even when they are hard wired to the PC via the usb. Something is blocking the PC and Docking station from linking with itunes. I believe i've done something really simple. Syncronization in itunes is greyed out and it shouldn't be. I've re-installed itunes but still no joy.
Any help would be appreciated.
Hi I attached my old ipod touch which i guess caused the problem which i will not link again once i get this sorted so which instruction should i follow.
Similar Messages
-
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
The "info" button does not appear when trying to sync in iTunes.
The "info" button does not appear when trying to sync in iTunes. It used to, but no longer does. Anybody?
Sync Services (which iTunes uses for the Info button) was removed in Mavericks.
Sync Contacts & Calendars via iCloud.
-> http://support.apple.com/kb/PH12117?viewlocale=en_US&locale=en_US -
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
My iPhone 4s does not appear on devices when connected to iTunes in my Mac
Check to make sure you have enough free space to include the videos.
-
ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this
To get iTunes to see your iPod try:
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing it in recovery DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Sometimes this program will get th iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage -
IPhone does not appear in list of devices in iTunes in the cloud
my iPhone does not appear in the list of devices
Hi, cdv2007.
Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac.
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below.
Mac OS X v10.6: iOS device not recognized in iTunes after restart
http://support.apple.com/kb/TS3540
Cheers,
Jason H. -
Since upgrading to OS 10.7.1, my touch Ipod (version 4.2.1, model PB528LL) does not appear on the iTunes as a device on the computer screen. It also seems that the ipod is no longer being charged via the USB connection.
Any assistance would be appreciated.I think you mean iTunes 10.4.1. That is the lastes version. Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
the tones show in the music library and also in the purchased section, but in the listing of tones there is nothing. After sync with the Iphone 4 they do not appear. So to look I selected on selected tones and it only shows 1 of 15. How can I fixed this? either have the ringtones back into "image of a bell" tones so they can appear on the iphone as ringtones and I can select them .
Anyone?
-
using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the houseHow is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link. -
Apple TV does not appear as a listed "Device" in iTunes
I just purchased Apple TV. It is working okay. I have two Macs synced with my Apple TV. One shows a "Device" in iTunes but the other does not. On the second computer, once Apple TV is loaded the device icon goes away. I am unable to access the necessary tabs to sync my photos to Apple TV. I have tried removing Apple TV and rediscovering it but it did not change anything. What am I doing wrong?
Welcome to the Apple Discussion Forums.
This is not unfortunately the same issue as the OP (original poster) described. In any case we would need further info about your set up, types of connections, router set up, network set up, how far you get in the set up process, that sort of thing. Your post will attract more interest if it is in a thread of it's own, so perhaps you could start a new thread with the information I suggested.
Also just to clear up the original matter: Things have now moved on since this thread started and an update has enabled photo streaming. The situation is now this:
Your main (Primary) itunes (the one with which you sync) will (should) always have the tv in the device list.
Your secondary itunes(s) (the ones which stream only) will (should) only show the tv in its device list if the library is selected as a source on the tv. -
I checked
http://support.apple.com/kb/TS1369 & http://support.apple.com/kb/TS1363 but its of no use. I tried to connect in a another laptop too. but of no use.Try here > iOS: Device not recognized in iTunes for Windows
Try disalbing anti virus software and turn off the Firewall on your PC.
I see you tried another laptop but try a different USB cable as well. -
I ´VW BOUGHT SOME SONGS FROM ITUNES & NOW I CANT SEEM TO FIND THEM ON MY PURCHASE ITEMS
SOME SONGS ARE FROM JESUS ADRIAN ROMERO
WHRE DID THEY GO?
THANK YOUSo why does missing music justify SCREAMING AT YOUR FELLOW USERS????
Seriously, turn off the freaking CAPS lock.
If they are not in your purchase history, they were not purchased with that Apple ID. -
Artwork will not appear on my Ipod, only in Itunes??????
I had artwork working on my Ipod (60 Gig Video) and added some mp3's with artwork. I noticed that the new tunes still did not have the artwork so I added it again. I do the addition of mp3's manually because of hard drive space and manually add the artwork. Anyway, still no artwork on the Ipod. Now after searching to see what happened, I now have no artwork on the Ipod at all! But when I open Itunes and select music under my device, all the mp3's have the artwork showing under info. So artwork is there when I check the song in Itunes but not displayed on my Ipod. Can anyone help with this? It must just be a setting or something dumb.
Thanks for the heads up. I guess I will have to wait for the next update because I won't be restoring to orignal settings anytime soon. I have over 6000 mp3's listed by album with all the correct tracks, artist, year, and up till tonight, artwork. About 5 to 6 month's of work! Was proud to show people the setup I had. Now I'm just ****** off. I hope they fix the problem and all I will have to do is update the artwork. Pain but not a big problem. Please let me know if you find any type of fix.
Upset in the MiddleEast! -
I have an ipad 1 and all was fine until the other day and now I can't connect to itunes a box pops up saying cannot allocate memory, what does this mean and howdo I fix it
Try quitting all apps and restart your iPad. Maybe you are running out of memory on the iPad. It's worth a try.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or try a reset,
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I am trying to turn on iCloud on my Macbook but all I get in Preferences - Internet and Wireless - is Mobile me and not iCloud.
Can you tell me how to switch it on?
Regards
annieYou need to upgrade the computer's OS. Click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(111099)
Maybe you are looking for
-
ISDN Authorization with RADIUS using ISE 1.1.2
Hi, I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius. Problem is th
-
1.1: New features, but does it work better? (XP)
Sorry if this has been covered, but I've out the last week. I've installed 1.1 on XP, but it doesn't seem any faster? Am I missing something? Is it more stable? thoughts? Thanks! Reid
-
Please give an example for Direct Input method in BDC.When it is used? what is the advantage and disadvantage?
-
Hi All, I need your help as i got an assignment where i suppose to call web service from PDF. I do have Adobe live cycle server environment along with me. I have created an sample orchestration in workbench where it does the some calculation and i us
-
I have only just ordered BT infinity, from experiance dealing with BT on the commercial side and residential there reputation still is 50/50 with me. Giving them a chance to pull something out of the bag and providing me with super high speed without