Hi people, I've a problem with my BSP application (updating IE6 to IE7)

Hi,
Right, I had a BSP application runs with IE6(internet Explorer 6), but now I updated my explorer to 7 version.
Now, when I go to my BSP application, when loads, makes an Error, like 'An Error was ocurred in the sript on this page'.
Someone Can help me?
Thanks,
Sergio.

Ok!, with design2003, Runs Ok!, but... my question is, Only runs ok with "design2003"?
Thanks.

Similar Messages

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Looking for a site that shows problems with windows patches or updates.

Looking for a site that shows problems with windows patches or updates...so I know what not to install.
Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
that does it with expertise.
Which forums would be best to look for such problems.
Thanks in and advance for suggestions

Hi,
I agreed with Cyber and Rick.
Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
Although there might be some problems when installing it, Windows update is not the one to blame.
For troubleshooting Windows updates, if needed:
Fix Microsoft Windows Update Issues
http://support2.microsoft.com/gp/windows-update-issues
Best regards
Michael Shao
TechNet Community Support

A problem with Nokia 5530 wirmware updating! Help!

Hi all,
I have meat the problem with Nokia 5530 firmware updating: updating allways finish with the message "Downloading of the variant package failed.Most probably there is non-commercial software in your device."
Is there any solution for that problem?
Thanks and regards,
Alexander

first its ok
then
translation:
For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
Nokia Software Updater has tried downloading the software, but this is failed 4 times.
Its posible that it can be caused by a bad, slow or instable internet connection.
This failure can also occur because we have maybe a problem with our servers.
try later again
i tried it on 2 PCs one with vista and one with XP plz help me
Message Edited by progunnl on 13-Mar-2009 02:50 PM

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

Has ayone experienced any problems withe latest apple tv update

who has experienced problems withe latest apple tv update???

Welcome to the Apple community.
There are always a few that experience some problem or other after an update. Exactly what problems are you having please.

Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

fair enough. No need for any unnecessary posts either. You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
In any case, I hope that your problem was solved.

Problems with 3D graph application redistribution

Hello wireworkers,
i wonder if
someone encountered problems with distribution of application that
uses 3D graph objects. I've created application that uses NI 3D graph
component and created installer with "Enable 3D graph support"
check box enabled. However after installing this application on the
windows machine without Labview two problems appeared: 1) "Error
loading control. A newer version needed. The default settings for the
control will be used." and after it 2) "You have 30 days to
evaluate the Measurement Studio ActivX control..." and something
like that. I don't get it. Why some newer version is required? and
what with that evaluation period?
Have any hints???
Thank you in advance and Merry
Christmas to everyone.
Alex
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Hi Alex,
I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior. If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears. In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue. You can try to follow the steps at the end of the KB, and let me know if that worked.
http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
Regards,
Aluma G.
National Instruments

Problem with CC desktop app update

Anybody has Problem with CC desktop app update?

Hi boloco
here are some soultions, which helped me out on my first trouble:
CC desktop lists applications as "Up to Date" when not installed
Good luck (I have new problems today which could not be solved by one of those)

I am having problem with my games application...non of the game run smoothly and also the games close automaticially

I am having problem with my games application... no idea where is the problem. non of the game run smoothly 1st in 1st its hard to open the apps in it open than also it will close automatically. Please help me out

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

HT5047 Having problem with the iOS7 verifying update what should I do?

Having problem with the iOS7 verifying update what should I do?

Several other users have reported this same problem. Unplug the charger and then replug. It should resume to 100%.
 Cheers, Tom

Having problem with my camera after updating 8.1.3

having problem with my camera after updating 8.1.3.. how will you fix this

Try Resetting your phone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. If this does not work Restore your iPhone in iTunes.

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

Problem with latest OS X update. 10.10.2. Grey screen. .??

Problem with 10.10.2 update. Getting grey screen. Have tried safe boot but got same result.

Mac OS X- Gray screen appears during startup
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Hi people, I've a problem with my BSP application (updating IE6 to IE7)

Similar Messages

Maybe you are looking for