Hi,Please guide me how to choose correct career in SAP r/3 technical side?

Hi, Experts.
I have 2.8 yrs experience in SAP B1 as a techno functional consultant but recently i am learning abap to move r/3 side. after learning abap can i get a job in ABAP or i need to learn any related CRM technical or ABAP-HR, in this which on is the most demand, please guide me in terms of job and future career or can i learn BI ? it's good for my career but iam thinking after getting few years experience in ABAP  iam planning to move to BI.but job point of i here it's good openings so can i learn now itself BI ?or CRM technical or ABAP-HR ?please guide me how can take good decision on future career point of and  to select good modules in SAP World.
Regards,
Kumar.

Have patience to start reading all from - [Re: Scope in SAP B1] ... you'll have the answer if not have it yet.
Please close this thread if answered.

Similar Messages

  • Please guide me how to delete the OLD claimed trip details

    Hi SAP Gurus
    We have corrected the all the cliams by newly created an posted properly today , how ever they are struck now and since they are form old employees (2007-2008) , few are still active / terminated/ retiree staus cant delete them nor make it zero. But appear in our report as pending...
    Please guide me how to delete the old trips.. your support really appreciated..
    Thanks
    Shan

    Hi Shan,
    As per my knowledge, no table should be deleted. Check the below link for more info.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/73/6bf037f1d6b302e10000009b38f889/frameset.htm
    <<removed>>
    Thanks,
    Praisty
    Edited by: Matt on Jul 26, 2011 3:11 PM

  • HT4718 i got mountain lion as an upgrade to my new macbook pro i want to reinstall it please guide me how to reinstall

    i want to reinstall moutain lion please guide me how to do it

    Welcome to Apple Support Communities
    Press Command and R keys when your Mac starts and reinstall OS X

  • Please guide me How to configure the swift integration packages

    Hi frinds,
    Please guide me How to configure the swift integration packages, in swift we have to use MT103 format
    sender side we have ERD system and Receiver side File system,
    wt adapters  we have to use in sender side and what kind of encrypt and decrypt formats support for swift in PI

    hi,
    the only reference we have is this OSS note and guides inside it
    1064419 SAP Integration Package for SWIFT: Info about installation
    Please have a look at it,
    Regards,
    Michal Krawczyk

  • Please guide me how to start working on crm

    please guid me how to work on crm, am new to crm, am very good complete abap.
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Sep 23, 2011 10:37 AM

    You do not.  This is not a feature of iphone.  it is all or nothing.

  • Can anyone please guide me how to create a table like employe table with 10

    Hi,
    can anyone please guide me how to create a table like employe table with 10colums.
    after that we need to update the colums with personal details......like name1,name2,address,city,zip...etc.
    using the RFC we need to update the personal details coulums (either select query or Insert command)
    if you have any program logic similar to this requirement please share with me...that would br greatly helpfull to me...
    thanks in advance
    srinivas

    Hi....
    We are having one table and now i am going to update that table's fields...
    for that in RFC function module we need to enter the fields in importing parameters (which are mandtory in table)
    and in source code just write like following....
    ( try to under stand that it contains some previous used table nad field and stucture and work area and function module names)
    FUNCTION ZL2C_UPDATE_MYCUSTOMER.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(USR_ID) TYPE  USRID
    *"     VALUE(LOGO_ID) TYPE  KUNNR
      DATA ls_mycust TYPE zl2cmy_customer.
      DATA: name1 TYPE name1_gp.
      DATA: sharpoint_url TYPE url.
      ls_mycust-usr_id        = usr_id.
      ls_mycust-logo_id       = logo_id.
      SELECT SINGLE name1 FROM kna1 INTO name1 WHERE kunnr = logo_id.
        ls_mycust-name1       = name1.
        SELECT SINGLE sharpoint_url FROM zl2c_CUSDASHBRD INTO sharpoint_url WHERE logo_id = logo_id.
          ls_mycust-sharpoint_url = sharpoint_url.
          INSERT into zl2cmy_customer values ls_mycust.
          COMMIT WORK.
        ENDFUNCTION.

  • TS3694 please guide me how to restore iphone when message appear 1015 on restoring process

    Please guide when i am updating os 4.1 to 4.2 version of my Iphone 3g it shows error 1015 at the end of updating now it is completly black please guide me how to restore it.

    Search google for an answer. You can not get help here for your jailbroken phone.

  • Please guide me how PMS Colors can be done in DUOTONE?

    Hello,
    Good Day
    I have job having 7 Colors and I have been asked to done it in 5 Colors.
    (1) Pantone 485CVC (RED)
    (2) Pantone 356CVC (GREEN)
    (3) Pantone 116CVC (YELLOW)
    (4) Pantone 301CV (D-BLUE)
    (5) Pantone 279C (L-BLUE)
    (6) Pantone 732C (D-BROWN)
    (7) Pantone 730C (L-BROWN)
    I can use Red, Green and Yellow on separate screens where as remaining
    “FOUR COLORS” are Dark Blue, Light Blue, Dark Brown and Light Brown.
    Please guide me how I can finish the job in five colors as my boss advised
    me to do it in duotone. The job is on Illustrator CS2 and Colors are PMS.
    Please guide me how PMS Colors can be done in DUOTONE.
    I have been working in filled of screen print for many years but unaware
    about duotone in Illustrator.
    I would sincerely grateful for your reply and Guidance.
    With Best Regards
    Ahmed Ali
    [email protected]

    Since this is (evidently) being prepared for screen printing, your options will be affected by answers to these questions:
    Are halftone dots going to be allowed? Screen printing setups (especially in common T-shirt shops) often require solids only.
    If the screen printing setup can accommodate halftoning, at what halftone ruling? When a particular screen printing setup is limited to very course (ugly) halftone ruling--commonly 30 lpi or less--one often opts for textures or grain to achieve the effect of shading.
    Are the inks going to be opaque? Opaque inks are most common, but limit the possible results when overlapped. Translucent inks are only suitable for white or very light substrate colors. If the screen setup is sophisticated enough to support decent halftone ruling, and will be printed on a white substrate, then the colors you have listed could be accomplished simply building the file as ordinary four-color process, instead of with 5 colors. (None of the colors you've listed—red, green, yellow, two blues, two browns—suggest requiring a 5th spot ink.)
    Illustrator does not support multi-ink swatches. You can use multiple fills and/or strokes set to overprint to replicate it in output. But Illustrator cannot properly display overprinting of opaque inks in its interface. Overprint preview always assumes the translucent inks of offset printing.
    All the above is why it is common to build screen printing projects in Photoshop as multichannel documents, saved as DCS 2 EPS, or printed to Adobe PDF as separations. It's more intuitive because you have a Channel (not to be confused with Layers) for each ink, and the program is able to properly preview the printed results because you can simulate opacity, including the color of the substrate.
    Working this way, it is common to create vector objects in Illustrator and then paste them into the appropriate Channel in Photoshop.
    ...my boss advised me to do it in duotone...
    I suspect your boss doesn't know what a duotone is. Duotone (and tritone, quadtone) print multiple separations of the same grayscale channel. Duotone in Photoshop is the modern analog of the process darkroom technique of making two separation plates from the same image, using different screen angles and exposures. In Photoshop, you can do this for up to four inks, optionally applying different grayscale curves to each ink, not different channels (different artwork) to each ink. Traditionally, this was done to impart a bit of "color interest" to black-and-white photos being printed in a 2-ink job.
    Your boss is saying "duotone," but he's thinking of the functionality of a multichannel file using spot inks. Even Photoshop's quadtone would not give you five inks.
    JET

  • Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting

    Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting to my email id and password

    Tap on the id in Settings > Store and log out of it and then login with your id. Any content already on the iPad will be tied to the previous owner's id and it can't be copied or transferred to your id - so it's probably best to do restore the iPad back to factory defaults and start as from new with it : Settings > General > Reset > Erase All Contents And Settings

  • Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Seems no one care about us .no one replied till no@!!!!@ strange

  • Hi their is a code 10 error appears on my network card driver please guide me how i can fix that....

    I have Thinkpad T41 As my network card drive installed after installation the driver the system suddenly shows "This device can not start (code 10 Error) Please guide me how i can fix it

    Hi VanessaLovery,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your notebook works fine on battery, but performs poorly on AC ,after taking it to a repair shop to have it cleaned.
     Here is a document on Troubleshooting an Overheating and Auto Shutdown Issue.
    Have you checked your performance plan to ensure it is set to balanced  Managing Power Options (Windows 7 and Vista).
    Have you tried a different electrical outlet?
    Are you using the AC adapter that came with your notebook?
    On startup if you press the F2 button approximately once every second, you should be able to enter the HP advanced diagnostics window, to test for hardware failures.    Testing for Hardware Failures (Windows 7, Vista).
    If you would like further assistance would you please provide your exact model of DV 6 and the Operating System you are running.  How Do I Find My Model Number or Product Number.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Please guide me how to include storage location to existing material master

    Hi Guru's,
    Please guide me how to include storage location to existing material master....
    please provide step by step process or provide any documentation that would be helpfull to me...
    please let me know of my question is not clear..
    Thanks in advance and will give full points....
    Srinivas...

    Hi
    First :- You can define the storage loctions in the plant under the customization :- SPRO -> Enterprise Structure ->Definition -> Materials Management ->Maintain storage location
    Once defined under the plant, you can create the same storage locations in the material master
    Second :- Under SPRO -> MM -> Inventory -> palnt parameters, for your plant check the field " Create Storage locations Automatically" . This will lead to create new storage locations at the time of GR, even if you have not maintained under step 1.
    Hope it answers your question.
    Regards,

  • Can anyone please guide me how to create itunes u public site?

    Can anyone please guide me how to create itunes u public site?

    Greetings;
    If you've already gone through the application process and you're ready to create you site, all the info that you need can be found here:
    http://deimos.apple.com/rsrc/doc//iTunesUAdministrationGuide/Introduction/chapte r_1_section_1.html
    All the best...
    Syd Rodocker
    Apple iTunes U Administrator
    Tennessee State Department of Education    
    Tennessee's Electronic Learning Center

  • Please advice on how to remain the font in SAP

    Hi,
    Please advice on how to remain the font in SAP as Arial monospaced instead of its auto change to Chinese character.
    At the same time, pls advice the correct forum i should went as this is related to the Basis and i could not find out Basis Forum.
    Thanks.
    Best Regards,
    Joo

    Hi,
    when i went to the SAP Menu page right
    Below is the Menu list
    ==>Office
    ==>Cross-Application Components
    ==>Logistics
    ==>Accounting
    ==>Human REsources
    ==>Information Systems
    ==>Tools
    Over here, does not have "Setting". Pls advice.
    Thanks.

  • How to choose correct domain from 2 domains

    Hi All,
    There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
    that throws light to how to choose a correct domain for your needs?
    Thanks,
    Parag

    Parag,
    Here is some light:
    bpmdomain is configured with BPM only.
    eaidomain is configured with AI and BPM. This includes the AI and DI BPM plug-in.
    wlidomain is configured with AI, B2Bi, and BPM. This includes the AI, DI and B2Bi BPM
    plug-in.
    samples is configured like wlidomain but has sample data associated with it.
    You can always read the config.xml for each domain and see what applications get deployed
    when the domain server gets started.
    Hope this helps.
    Chris
    Parag Gandhe wrote:
    Hi All,
    There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
    that throws light to how to choose a correct domain for your needs?
    Thanks,
    Parag

Maybe you are looking for

  • IPod Touch 5th Gen. on the Fritz?

    I just recently bought an iPod Touch 5th Generation and I've only had it roughly four months.. I bought it from Walmart (and the receipt has disappeared, making this problem even worse). Anyhow, I haven't dropped it, I've made sure to keep all liquid

  • Issue while loading master data from BI to BPC

    Dear All, I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's

  • How many hard drives can i stream from one mac for apple tv

    Hi a newbie to all this ive got a 500gb external hd and running out of space but am looking to buy a 1tb but i want to set it up as im using both hard drives so i get 1.5tb as this is a cheaper option for me is this possible and how many thanks for y

  • IPhone 5 not working with Honda

    I have a 2011 Honda CR-Z and when I connect my iPhone 5 to the USB jack I either get an unsupported message or it only loads 54 of my 450 songs.  Anyone else having this type of issue? Is there a fix?

  • How to map AED in the case of domestic procurement.

    The procurement  process is they will raise PO to domestic vendor  and this vendor is importing material , so he is passing AED (Additional excise duty ) to this customer , while doing GR AED is not capturing in AED field and it is not updating in Re