Hi, please help me out, i tried to update my iPhone but got into recovery mode and when i try to restore it i got error 12, please help
please help me to get rid of error 12, i can't restore my iPhone
Okay i got the solution.Just reinstall the itunes again and the problem will be solved.
Similar Messages
-
help
Hi annmarie186,
If you are having issues restoring your iPhone, you may find the following articles helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden -
my iphone is in recovery mode and when i try to restore it, its doesn't go all the way threw this happen right after i try to upgrade my phone. what do i do HELP ME!!!
Hi, are you doing it through Settings or via iTunes? If doing it through Settings, try plugging it in via USB and updating with iTunes. Hope this helps.
-
I tried uppdating my ipad then it went into recovery mode. I thought "oh no problem, my phone has done this before". So, I hooked it up to iTunes and started to restore/update it, but when the update began, it said it would take 24 hours to download. Already abnormal. Then, the number kept rising higher and higher until it got to 300 HOURS. Then, once it reaches a certain 300, it says "connection failed. please check to see that you have a working connection or try again later" or something like that. So, my iPad is now stuck in recovery mode and I can't exactly talk to people now. What do I do?
Hello aZaa4401
Sorry to hear about your issue. I would start your troubleshooting with the article below to check to settings of your computer to make sure your connection is good to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
-Norm G. -
I go to file and click transfer but nothing happens. I am trying to update my iphone but it says you need to transfer purchase apps. So i am now stuck. i need help!!!
Click here, follow the instructions, and choose Transfer Purchases in the File menu.
(79456) -
I tried to update to ios 7.0.1 and my iphone 5 went into recovery mode and said i had to plug it in to itunes so i did and it restored to factory settings and i lost everything and i am pretty sure i dont have anything backed up on iCloud.. Is there anyway i can recover anything? I had over 1,000 pictures and 500 contacts and now i have nothing.
Then you have no data from which to backup, I'm afraid.
This would be a good time to review the User Guide and learn how to use your phone as recommended so data loss like this doesn't happen again.
Best,
GDG -
iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee
Try putting it in DFU mode and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have been searching on this topic for hours and i haven't found an answer that works so i decided to post the question myself. So on my iPod touch 4th gen., it got into recovery mode somehow and when i plug it in it says something like "ipod in recovery mode, please restore". well i clicked restore and it went through the whole process then said "ipod can not restore. an unknown error ocurred (28)". I have the newest software on the computer and ipod, i restarted my computer a number of times, i changed USB ports, no other USB is plugged in and i just don't know what else to do. The screen is just black and won't turn on. I've tried the hard restart and everything!! pleaseeeeeee help!!
Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error28 -
Somebody plz help...
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015. -
my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help
Has the iPod been wetted?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Try on another computer.
Also see:
https://discussions.apple.com/message/12690674#12690674
https://discussions.apple.com/message/13032101#13032101
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
How do I turn off "find my iphone" from the computer?
The phone was disabled and I cannot restore and back up until I turn off this featureYou can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iphone is stuck in recovery mode and itunes will not recognize my phone. I've tried pretty much every trick i can and i still do not know what to do. Someone please help me
I've done all of these, even trying a different USB port, and still, nothing. This is really confusing. Windows 8.1 said something to do with USB malfunction or something and nothing works. I need to restore my iPhone quickly and nothing has happened. My cable is not genuine Apple product. iTunes makes the noise that it makes when I connect the device, but it doesn't say 'iPhone is in recovery mode' or even say 'iPhone' in the corner. I am really fed up and would really appreciate a response.
Thanks,
Nathan. -
Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"
http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue. -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Maybe you are looking for
-
Error when calling a stored procedure from a SQL Script
Apologies if this is a really dumb question but I can't seem to call a procedure in package from a SQL script. I have a simple package.procedure containing a loop to populate a table. I would like to include a call to this procedure from my database
-
ABAP Proxy Exception / Fault Message
Hi All, I have got a requirement to raise an exception from existing ABAP Proxy depending on condition. XI consultant created a fault messge type and attached to the inbound interface message type. I have regenerated the ABAP proxy but I cant find
-
Unwanted Rank Order line deletion in Bank Determination in FBZP u0096 APP
One more line item is being added and asking for a Rank Order (Mandatory Field) in Bank Determination (T/Code - FBZP - APP). Inspite of deleting the Payment methods / Rank Orders lines & after generating the Request (For the deletion of unwanted data
-
Intermittent broadband, phone interference - and t...
Hi, i have constant problems with my phone and a broadband connection that comes and goes. BT say broadband is picking up interference from my phones. There is no underground cable connection to my house. My phone and broadband come via overhead tele
-
Importing a filmstrip into PPro, or wire removal
Hi folks. I've just got around to re-editing a short film I made some years ago. It was shot in Panasonic P2 medium high-def (1280x720), but was originally edited in standard-def. I now have the opportunity to re-edit in the native source format. So