HI Please help on specific IDOC for VK13

Hi
When executing the VK13 transaction there is a step where there is a pop-up specifying the
MESSAGE TYPE = COND_A
logical message type
By default it is COND_A. has anyone been able to to use other message type example a ZCOND_A message type. so as to implement specific logic
Or there may also be the solution to create an extentsion of the COND_A and develop specific code in the FM of the outbound idoc.
The expected result is to be able to code specific logic when triggering the VK13

Gaff wrote:
42
.... ah man,... now you told him.... :)

Similar Messages

Please help to find docs for Generation-4 Hardware

Hello
Please help to find docs for Generation-4 Hardware
• Cisco MDS 9000 48-Port 8-Gbps Advanced Fibre Channel module (DS-X9248-256K9)
• Cisco MDS 9000 32-Port 8-Gbps Advanced Fibre Channel module (DS-X9232-256K9)
• Cisco MDS 9513 Fabric 3 module, DS-13SLT-FAB3 (Generation-4 module)
Thanks
Chetan.R

Hello Chetan,
Here's a link to the Gen 4 migration guide:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/hw/9500series/installation/5.2/installmigratefab3.html#wp1435702
I do hope that guide answers the questions you have.
Regards,
Ken

Please help, has been blocked for your account temporarily

Please help, has been blocked for your account temporarily

Hey @kat54 ,
Welcome to the HP Forums!
I understand you're receiving an error stating "This program has been blocked for your protection."
You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
Make sure the utility you've downloaded is for your exact product and operating system.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.

www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums.

Download Camera Raw 8.3 update for my Photoshop CS6-How do I do it? I cannot find this option anywhere on the download sights for Adobe PS. Please help with specific instructions. Thanks

I cannot find anywhere on the Adobe sights the specific page where I can download Photoshop CS6 Camera Raw Update to 8.4 or 8.4 to support Lightroom 5 and my new Sony a7r camera. Please help. I am a tech novice. Thanks.

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Error -50 when opening itunes....PLEASE HELP - been this way for 2 months

Hi Everyone...I have had this issue for 2 months now and even when I have been talking to apple support team they are unable to fix the problem.
When I try to open my itunes i get the error message -50...I am running the 64 version of the itunes when its working, with my operating system of Windows 7...Apple technical support thought that it might be my anti-virus program - which is systems mechanic pro (an all in one program for cleaning out my computer)
I have tried un-installing and then re-installing, over and over again. I have also tired deleting file and installing older versions and I again get the same error. If anyone has any ideas or solutions that would be greatly appreciated as I have been without my itunes for 2 months - and I'm sure you all can understand that your not able to do anything without this program...PLEASE HELP

I resolved an issue of this description just 2 nights ago. I am guessing the error number is a 'General' error number not a specific one, becasue from reading I see many reasons or fixes for the same error code and as in my case possibly a different underlying causes.
My (it was my wifes iTunes ) that would not open on her work provisioned laptop. Being a server admin I am the luccky one at home that get to fix it.
The System side scenario of my (-50) is this:-
1. Work provide (Windows Vista ) laptop.
2. Work distribute Software to laptop via networked Windows Distribution services.
3. My wife uses Quicktime to listen to medical audio off the net that requires Quicktime.
4. Quicktime installed from said Windows distribution services All works no problem.
5. Son visits us from USA with an iPad.
6. Wife buy's an ipad the week released in Australia.
7. I install Itunes to her laptop so we can 'register iPad'and she can manage her Apps, Doc's and Tunes.
8. All works good.
9. iTunes 10 is released and updates her iTunes.
10. I get called (not sure if same day tho) Help me I don't want to loose or reset my IPad to fix this.
11. I as she had tried several uninstalls and reinstalls of iTunes.
12 No change.... still (-50) on loading iTunes.
13. I call Apple Support (after all we pay for the additional support pack).
14. Apple check a number of services such as 'MobileDeviceHelper' is loaded and they appear to be.
15. Apple guide me through an orderly uninstall of ALL Apple Apps that are hooked into iTunes. (order of uninstall is specific to be done properly I will post apps removal orde at bottom of this thread).
16. I get to Quicktime and I note the Windows distribution of Quicktime 7 and additional Quicktime 10 application installed in 'Windows7 Control Panel 'Programs and Features).
17. I as an Admin at my wifes work (no I have nothing to do with the desktop Builds) realise I need to go in to my wifes work and (yes) reinstall the vesion 7 Quicktime from our Application Distribution service then Uninstall it.
18. I do just that Work provisioned Quicktime 7 is uninstalled.
19. I then set about uninstalling the remainder of the Apple applications that are 'connected to iTunes and for good measure two others that are not.
20. All is now gone
21. I reinstall iTunes7
22. 'Voila' it opens now.
I seems to me that the update to Itunes introduced an additional install of Quicktime and messed things up. if software is 'distributed' to the laptop as ours is Updates like Quicktime cannot happen unless distributed by work. Neither can you uninstall work distributed apps unless connected to the work network. (Oh we do have (Local Admin) permissions on the work provided laptop to do what we did) Obviously Work provisioned Quicktime will not go on again..
Oh the Order of uninstalling the Apple apps from a Windows 7 Laptop as provided by the Apple Support Guy is.
1. iTunes
2. Quicktime (where I saw the 2 Quicktime installs)
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Application Support
For good measure I also uninstalled
7. Mobile Me Control Panel
8. Safari
Restarted the Machine and presto it was working again. I did not manually go and delete the Folders left behind if any were after the uninstall. I noted all my wifes stuff Apps, Tunes, Doc's etc came back when iTunes loaded and the iPad was not connected (which I did first). iPad was connected and sync performed normally.
Thankfully the marriage is on an even keel again.
I now have my oWn iPad
and I now am ******* after a MacBook Pro
Rachel at work still says ... Get a Mac
Work still resisting.
May be MazzBritt not uninstalling in the right order. the Apply guy was adamant it needed to be done so.
Hope this helps some one........

Please help in configuring IDoc to JDBC scenario

Hi all,
i am very much new to SAP XI 3.0. We are trying to execute an IDoc-XI-JDBC scenario. The data in the segments of the IDoc should be populated into a table of the database.I am unable to do it as I am totally new to XI.Can any one please help me on the steps invovled in configuring the above scenario or please provide any document describing a similar configuration.
Thanks in advance
Pavan

Hi Pavan,
check these links (some on Idocs & some on JDBC)
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards
Vishnu

PLEASE HELP! SLOW SPEED FOR 5 WEEKS!

Hey all, i've come here as a last resort as im sick of my slow infinity speed and sick to death with bt customer service which does not exist!
Since before christmas my bt infinity package 1 38down/10up has been playing up after 12 midnight! usually after this time my speed would go down from 37download to around 0.5/0.1 soo low that i can't load a web page. Ive tried for weeks contacting bt which takes me to the offshore call centre where iv'e been fobbed of that an engineer is investigating an issue at the exchange or that the issue will be fixed in either 24, 36 or 48 hours numerous times to which it has not.
This last week my internet speed has dropped during the day time where before in the day it was a solid 37down and 10 up it now goes down to 10 meg and now its gone down to 0.1 meg. It went down to 0.1 meg today at around 6.30pm.
These are a list of stats below: Im at my wits end and i just want my broadband fixed! I beg Please someone help me!
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:07:34
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

Can someone please help me too! before christmas i was getting low speeds after 12 midnight, going down to 0.1 meg for over 5 weeks now ive had this problem and now in the day where i used to get a solid 37meg down im now at different times, started today at 6.30pm im going down to 0.1 meg.
BT Customer service is disgusting beyone belief, been fobbed of after 12 phone calls. Please someone help.
stats avalibe here:
1. Product name:
BT Home Hub
2. Serial number:
+068543+NQ41012931
3. Firmware version:
Software version 4.7.5.1.83.8.204 (Type A) Last updated 15/01/15
4. Board version:
BT Hub 5A
5. DSL uptime:
0 days, 00:45:18
6. Data rate:
9999 / 39993
7. Maximum data rate:
36556 / 97131
8. Noise margin:
30.5 / 22.7
9. Line attenuation:
13.5 / 12.8
10. Signal attenuation:
13.7 / 12.8
11. Data sent/received:
0.2 MB / 0.1 MB
12. Broadband username:
[email protected]
13. BT Wi-fi:
Yes
14. 2.4 GHz Wireless network/SSID:
BTHub5-QTSG
15. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security:
WPA2
17. 2.4 GHz Wireless channel:
Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID:
BTHub5-QTSG
19. 5 GHz Wireless connections:
Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security:
WPA2
21. 5 GHz Wireless channel:
Automatic (Smart Wireless)
22. Firewall:
Default
23. MAC Address:
34:8a:ae:bb:d4:80
24. Modulation:
G.993.2 Annex B
25. Software variant:
AA
26. Boot loader:
1.0.0

URGENT PLEASE HELP-Session State Provider for 8i.

We are looking for a SESSION STATE PROVIDER for .NET 2.0 for Oracle 8i. Please help to find a solution. The current installation on the Oracle website does not work for 8i.
Thanks a BILLION in advance.

You'll need to install the ODP 11 beta...

PLEASE Help with HTML code for email background image...

Hi there!
i have a background image that I want to pop into an html email widget for the email's background... here is the web link I created in Photoshop: file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/tileabl e-metal-textures-2.html
If anyone could please help me out that would be AWESOME! I've attached pics of the background & I'm using Infusionsoft email builder which allows for HTML widgets. I have a code that I use for my landing pages & webforms which works, tried that but no dice!
Any help would be much appreciated - I'm an html newbie!
Here is the code that I use for landing pages & works great, tried it for the email & it was a fail:
<style>
#mainContent .background, {
      background: url('file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html') no-repeat center center fixed;
    background-size: cover;
</style>
<script src="file:///C:/Users/Rachel/Desktop/iMuse%20Clients/LeadMachine360/Email%20Signatures/ti leable-metal-textures-2.html">
</script>
<script>
jQuery(document).ready(
      function(){
      jQuery(' table.bodyContainer').removeAttr('bgcolor');
</script>
thanks in advance!
Muse

Not sure what you expect. Your URL is absolute and pointing to a local file resource. It's not a proper relative HTML link. Beyond that it's toatlly unclear how you actually plan to load your image and where they are hosted, so nobody can tell you anything. Either way, there is an obviously painful lack of understanding of even the most basic web techniques, so the best advise anyone would give you is to spend some time with a web search and actualyl learn some of that stuff...
Mylenium

Someone please help me regarding synching for first time but with lots of apps on the iPad

Hi, when I bought my iPad2 it was booted in the store, and since then I never connected to a computer, how do I now sync to my PC without losing all the apps I paid for? Please help, thanks.

Authorize your computer for iTunes content - launch iTunes and go to Store>Authorize this computer. Make sure that you are signed into your iTunes account on the computer as well. If you are already authorized and have been using iTunes on your PC you are good to go.
I copied this from another discussion. If you follow these steps you should be fine - for all of your purchased content.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
That should do it.

Please help.... for hhk file

guys i got an issue in robohelp 10
i had a project of toc in two languages, except the translation content rest all the links are perfectly equal to each other
so once i created the toc in 1st language, for the 2nd i just replaced the source html files and made the necessary changes in the index as well
now when i got the check bck for the 2nd language they wanted different index order so i went to the hhk file of the 2nd and got confused to find out that actual index created in the CHM output and its coding in the CHM file is not the same.
i guess you all got my query
so where can i make the necessary changes for the updated index? and how?
thanks

Hi Vipin.
I'm not sure I understand your problem. Can you please help us to understand by posting an image of what you are seeing? Also can you provide some more background? Are you producing two different CHMs from the same project for each language?
It also sounds like to produce your two outputs you are making manual edits to the TOC and Index and possibly even replacing the topic HTML files. This is not necessary. You could use conditional build tags to tag content for the two languages. This would work by filtering out all content with one tag when you create the CHM. You could also setup a TOC and Index for each set of files and just ensure you use the correct ones when you create the CHM. You could even duplicate the Microsoft HTML Help single source layout and set them up accordingly to prevent you having to constantly change the properties.

Please help with Posting Keys For Fast Entry (t.code OBXJ)

Dear experts,
Please help me to be more familiar with configurtation of Enjoy Transactions (t.code OBXJ). I want to configure fast entry transaction and change standard assignement of posting key. But there are no editing options in this transaction, just three transaction keys are predefined and posting keys are assigned to them (those are changable). But where to see what those transaction keys mean? And what could be your proposals, how to configure this IMG step?
Thanks!

Hi,
t.code OBXJ is for automatccly postings, normal you never change the standard posting keys.
In the block line items you can select colums you need and place the one's you need to the begin of the screen and in the right top corner of posting line items you can click an save this as (default) variant.
When you want to use an other posting keys you use the option complex posting (F6)
Paul

My iTunes Store won't load past the twentieth song!! Please help been going on for months now. Also is super slow in loading.

Every time I open my iTunes Store on my iphone, the store will hardly load and when it does it only lists the songs 1-20 in every genera. it will load the a limbs and front page of that category. Please help haven't been able to do anything for months!!!

Hello ChainedBear,
Welcome to Apple Support Communities.
Sorry about the difficulties with the iTunes Store, you can take a look at this article for troubleshooting steps:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
There are several options in that article. If you are still having difficulties after going through that article, you may need to take a look at "Additional Information" for contact information.
Regards,
Jeff D.

Ergent help about inbound IDoc for Goods Receipts

Dear friends
We have an ergent issue needing your help.
It is about DEVRY03.
Senarios is as following:
When we create a delivery by using VL31n, system try the IDoc and transfer to XI.
This is ok.After external warehouse system processes the IDoc,a message is sent back to SAP to post the goods receipts for the delivery.
Inbound IDoc type is DEVRY03. Is it right?
Which function module or which process ok is used for this senario?
Can anyone suggest how to do it?
Minghan

Hi !
Here comes some information for the INBOUND idocs....
There is a IDOC for transmitting goods movements from a legacy system.
It's message-type is: WMMBXY
IDOC-Type is: WMMBID02 (See we60 for it's pretty good docu....)
Prcoess-Code is :WMMB
The function that processes the data is: L_IDOC_INPUT_WMMBXY
Hope that helped a bit (for inbound)....
Regards
Rainer
Some points would be nice if that helped.

HI Please help on specific IDOC for VK13

Similar Messages

Maybe you are looking for