Hi pls give me any one update routine, transfer routine scenarios

hi pls give me any one update routine, transfer routine scenarios for to telling interviews (easy scenario for interviews)

Hi Venkat,
Pls chk this nice paper:
How To Routines within Transformations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Pls chk this links for samples & Examples:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/c3963dfbde4dede10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/bcdb7801344defe10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/bcdc6001344defe10000000a422035/frameset.htm
Hope this helps,
Regards
CSM Reddy

Similar Messages

I have hp g series its spyker not working properly pls give me any solution

i have hp pavilion g series. i was listening music first its left spesker turn off and after its both speaker turn off. i have cheaked all settings the all settings are correct pls give me any sollution.

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

Any one updated his/her S.ericsson W580i?

Hi! i'm Vincent and I've been using a Sonyercsson W580i for some years now. My Sonyericsson PC suit was updated to Sony PC suite and asked me for an update of my phone’s software (Sonyericsson W580i) and I’m scared of updating it because I don’t know the changes that may occur in my phone. For anyone who has tried updating his or her phone software (after Sonyericsson PC suit was updated to Sony PC suite) pls can you tell me if you’ve observed changes in your phone’s features? Thanks.

I'm not sure what the exact changes may be, since we don't have such lists or info availalbe.
Anyone else using the same phone that runs on the latest software?
A little extra though is that I haven't heard of any problems with the W580i lately or as I could recall at all.
What do you think about this forum? Let us know by doing this short survey.

Pls help me any one, ADF Faces EO,VO creation in mutiple table..

problem here:
table1
field1 (pk)
field2 NAME
table2
field1 (pk)
field2 (fk for table1)
field3 NAME
table3
field1 (pk)
field2 (fk for table2)
field3 NAME
Here each table having separate panel tabbed, i want to show table1 of
field2 in third panel tabbed(screen). How i can create EO,VO to show
with success.
When i'm showing the table1 of field2, is not require to do a DML operations.
like this my third screen's adf table
field2(table1) field2(table3) field3(table3)
(showing for
user identify)
Urgent Requirement pls help me.
In case of any query please free to mail @ [email protected]
Thanks & Regards,
Rengaraj
Edited by: user11129216 on May 4, 2009 7:21 AM

Like Frank, I'm not 100% sure I'm understanding your requirement, but here are some observations.
Your three tables look like master/detail/detail, let's say it was Regions->Countries->Locations
So, you would build a RegionsView VO to show the Regions information.
You would build a CountriesView VO to show the Countries information.
You would build a LocationsView VO to show the Locations information.
Then you would create a view link between RegionsView and CountriesView to coordinate that master/detail relationship.
Then you would create a view link between CountriesView and LocationsView to coordinate that master/detail relationship.
All of the above will be created automatically for you if you have foreign keys defined in the database when you use the Create Business Components from Tables wizard. (including the underlying entity objects for your database tables, associations that reflect your foreign key relationships).
If you want LocationsView to show information from its parent, you can include the Country EO as an entity usage in the LocationsView and include the attributes from country that you want to appear in that (join) query. You can repeat to also add the Region EO as an entity usage to join all three.
Then, you would drop RegionsView from the data control palette onto tab1, CountriesView onto tab2, and LocationsView onto tab 3.

Hoe to remove waitingapps icon on screen pls tale me any one

how to remove waiting appas icon on ipod screen.?

Have you tried a reset to see if they resume loading after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Pls give for any small narraion

< MODERATOR: Per the forum [rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement], please use an appropriate subject in your message... and ask an appropriate question. Message locked. >
S_ALR_87013346 - Profit Centers: Vendors (Transferred Periodically)
S_ALR_87013345 - Profit Centers: Customers (Transferred Periodically)
S_ALR_87013347 - Profit Centers: Assets (Transferred Periodically)
S_ALR_87013348 - Profit Centers: Materials (Transferred Periodically)

Hi,
Refer to sap.help.com regarding the reports
http://help.sap.com/erp2005_ehp_02/helpdata/EN/eb/1376b443c411d1896f0000e8322d00/frameset.htm
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Does any one know the pdf only scenario?

Hi
we came across an 'undocumented feature' of interactive form usage in WDA, that's the so called pdf only scenario.
This is how it works:
1. for the form form UI element , only the pdfsource is bound to a context node , datasource and template source are empty;
2. the pdfsource is generated from a DDIC based interactive form ,by calling FUNCTION 'FP_JOB_OPEN' and FP_JOB_CLOSE;
3. user input data will be stored and send back to the pdfsource as a document(xstring);
the advantages are :
1. DDIC based forms will be available interactively online(which is more friendly to abap developers and more powerful), no need to set to the legacy mode to make it work; (according to SAP LIBRARY, function module based forms are only available for printing);
2. the context of WDA application is simple, you can switch between forms without complex binding,there is only one binding between the forms and wda context: the pdfsource;
3. using ADS method , you can easily to extract xml data out of the pdfsource, and using ST or DOM you can manipulate it easily and send to user again;
4. ZCI DDIC forms work, no need to use ACF;
we have tested this on SP16 successfully.
Imagine you are building a WDA application,that will deal with different forms with different interfaces,you will realized the power of the pdf only scenario.
unfortunately, this funcitonality is not officially supported by sap, for ddic forms we have to follow
http://help.sap.com/saphelp_nw70/helpdata/en/42/c247dc6227311ce10000000a1553f7/frameset.htm
, which i think it's confusing.
i 'd like to know does anyone work with this scenari before, and i hope SAP can hear my voice and to notice the power of this scenario and make it officially a new feature.
best regards
jun
Edited by: Jun Zhang on Oct 7, 2008 11:42 AM

Hi Jun,
I'm currently working on, a such scenario . My forms is based on a DDIC interface and should be used with e-mail flow ( off-line ) and into a webdynpro Abap .
In my form i got dropdownlist box populated by DDIC value , also dynamic text and information such as user name, number of holidays etc...
I'll do all the code describe in the help, unfortunately when i set my forms as enable in the WD4A , all value pre-populated in the forms ( dropdown list box, user name etc... disapears ...
If i set the same forms as not enable , all value appears correctly .
I'll debug the code to see where is the problem, it's in a method where the forms is generated twice and all value disapears. I'll send a message to OSS for this, the answer was first it's because you use dynamic text then the answer was it's because you used DDIC interface please used XML .
I look at sample web dynpro given by sap but none of them are populated when it's appears (perhaps my ides value are not set ) .
So i'm currently trying to redevelop my forms based on a XML Interface and will try it . I let you know if it's works ....
Regards

Can any one give me answer for these questions

Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value

ANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B

I updated my iPad 4 with the new iOS7 and since then Skype started problem and now email i.e, yahoo as well. I can hear people on Skype but they can't hear me though it was working fine with old version. Is any one else having same problem?

I recently purchased iPad 4 and it is only one month old. I updated with iOS 7 and next day got problem with Skype and yahoo mails. People can't hear me on Skype though I can hear them clearly. I was replying yahoo mails quite nicely and now as I start typing the iPad turns black and have to open it again. Is there any one else facing the same problem? I was thinking to go to apple shop for support? Any suggestions?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST

hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JK

Hi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
    documentheader = wa_documentheader
TABLES
    accountgl      = it_accountgl
    accountpayable = it_accountpayable
    currencyamount = it_currencyamount
    return         = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
      EXPORTING
        documentheader = wa_documentheader
      TABLES
        return         = it_return
        currencyamount = it_currencyamount "currencyamount
        accountpayable = it_accountpayable "accountpayable
        accountgl      = it_accountgl "accountgl
      EXCEPTIONS
        OTHERS         = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

HT201210 i have a problem with my iphone 4s when i update the system its giving me error 36 ? and the phone docent want to open! any one please know who to solve this problem

I cant open or upate my iphone 4s because its give me message erorr 36, please any one know what dose it mean erorr 36 and who i solve this problem.

Hi mohamed00,
Thanks for visiting Apple Support Communities.
I recommend following the method below if you are not able to restore your iPhone and see an "error 36:"
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Cheers,
Jeremy

Pls any one guide me to this problem

Hi ABAP Consultants,
Pls guide me to this problem,
I developed one report for inqury and quattaion and sales order on the same list.
there dupulicate vales are coming, i need to remove to this problem.
for that i wrote a duplicate addjusent squary. after that in inquary duplicates are not coming but in quataion and so repeated records are printed.
Pls pls any one say some thing about the problem.

HI,
How are you displaying the entries is this done via ALV and did you first create an internal table which you pass to the ALV. When having an internal table you can simply do:
DELETE ADJACENT DUPLICATES FROM itab
You can even give key fields.
If you are using an SELECT and ENDSELECT statement and then a write statement in between, I would suggest to drop the SELECT and ENDSELECT statement and do:
SELECT * FROM TABLE INTO itab WHERE ...
Then you can loop over the table and do your write statements.
Best regards,
Guido Koopmann

Why we cant use commit in trigger, can any one give proper explanation

Why we cant use commit in trigger, can any one give proper explanation

You shouldn't use a commit in a trigger if it's part of the same transaction as the action happening on the table.
Eg. Suppose you have a table that stores details of orders, and it has a trigger that updates the stock table.
If a customer comes along and creates an order but decides part way through that actually, they don't want the order after all, the transaction is rolled back.
If you don't put a commit in the transaction, then the stock table details remain unchanged - no order, so no stock reduction. If, however, you forced the commit to happen in the trigger, you now have no order, but the stock table details have changed.
That's not what you want to happen!
Sometimes it does make sense to have a commit in the trigger, but this is very much the exception. If you come across a table mutating error, it usually means that you have a problem with your design and that you need to rethink it, NOT bodge it by using autonomous_transaction and a commit.
Of course, the times when you'd use triggers should be few and far between - the above example is NOT how I'd code an orders-stock transaction; I'd have some PL/SQL that handled the transaction, rather than direct inserts onto the table.

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

Can any one Tell me how i write std routine if i dont authorization in VOFM

Dear Guru ,
I Have Encountered An Technical Issue while writing routine RV61A943 and RV64A978.
Using access key I have unlocked above two routine to write Pricing Procedure's Requirement (in RV61A943) and Formula for Condition Value (in RV64A978) in se38 .
But when i am trying to make some changes in routine RV61A943 or in routine RV64A978 using SE38 I am not able to write any code within it.
So Sir I want to know in which way i have to write the routine -- Using VOFM or can write using SE38 itself.
(Initially I tried using VOFM to write the routine in development server But I found doesnot have authorization of VOFM in development server)
Can any one tell me the full technical procedure to writing the routine..
Pls help.
Thanks & Regards
Saifur Rahaman

Hi,
You need to ask for authorization of VOFM then only u can make changes to routined.
Reward if useful.
Regards
Susheel

Hi pls give me any one update routine, transfer routine scenarios

Similar Messages

Maybe you are looking for