HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
COMP
Compaq Presario CQ42-372TU Notebook
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCac=...
PLZ ANY BODY HELP MEEEEEEEE
This question was solved.
View Solution.
You can upgrade to an SSD.
The simplest method is to use an SSD like the Corsair Force 3 and be sure that you purchase the migration kit.
The migration kit comes with cloning software and a usb to SATA/power cable that connects to the new SSD.
It is recommended that you purchase and SSD that is about 256 GB in capacity if you can find one that is affordable.
SSD with migration kit options in a search that I did.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps
You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
ArealDJ wrote:
I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem. -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
plz help me how i remove previous id that is stuck in activation process and me not know password and id plzzzz help m
Read this: http://support.apple.com/kb/PH13695
If it is locked with your ID, then re-set the password at https://iforgot.apple.com -
I have an 21.5 Mid 2011 iMac and I want to upgrade my RAM. Currently I have two 2GB and two free slots. Do I have to put in two 2GB in the free slots or can I use two 4GB or 8GB?
You can leave the existing RAM in their current slots and add compatible modules in the empty slots. For best performance, add two of teh same size. Our 2010 iMac 21" shipped with 4GB RAM---two 2GB modules in two of the four slots. I added two 2GB modules to the empty slots and now have 8 GB RAM.
Be sure to order RAM from a trusted Mac-savvy RAM vendor. Some vendors thing a Mac is a hamburger. For over a decade I've bought all our Mac RAM (and we have 18 Macs in teh family!) from one vendor:
http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
The link is to the proper RAM for your Mac.
Crucial.com is also a trusted vendor. -
Is there a discount option for someone running Logic 8 who wants to upgrade to 9? I know the price of 9 has been reduced in the App store but there always used to be a discounted upgrade option. Just wondered.
Hi
Short answer.... No... not any more
CCT -
Help! data manipulation for high speed streaming to disk from multiple boards and multiple channels
I am using Labview 7.1 and have been trying to capture data from 12 channels simutaneously sampled at 2MS/s each and streaming to disk for up to a minute or more. The hardware I am using is 2 x PXI 6133 S series boards with a MXI4 link to a Pentium D 2.8 Ghz machine with 2Gb ram. I have 2 sata drives set up in a raid 0 configuration which should give me hard disk write speed faster or equal to the MXI-4 transfer speed.
I have first started off by using the example code "multi device sync - analog input- cont acquisition" which has enabled me to sync the two boards and sample at the required speed.
To stream the data to disk, I have first merged the data from each board together to save it to one file. I have tried using the storage vi's but I end up with a Daqmx read error (trying to read data that is no longer available). I have played around with the read data size to the point that I either get a insufficient memory error, or I get the "trying to read data that is no longer available" error. I have also tried using the file IO blocks with some success and have found that I have been able to stream to disk only if I configure the daqmx read block to output the data in "raw 1D I16" format and plugging it into the file-write block. In doing this, I have noticed that using multiple channels on one daqmx read task, I will get all the channels in one 1D array rather than a 2D array organized by channels. This makes it messy to read at the end of this, and I also don't want to write another vi to separate the channels, due to the high chance of getting the data mixed or messed up if I happen to change the number of channels on a board
Is there a cleaner way of streaming this data to disk and keeping the channel data separated from each other?, and/or is there a better way to capture and handle the data I need?
I have attached the vi which I have got to consistantly work streaming to disk using the raw 1D I16 format.
Thanks in advance to anyone who can help.
Attachments:
multidevicesync_analoginput_streamtodisk.vi 197 KBHi,
i can suggest following
Refer to an example VI called as "High speed data logger.VI" in conjunction with "High Speed data logger reader.vi" in Labview examples. Alhrough the logger might be in Tradiditional Daq format, it can be quite easily converted to Daq Mx format to store data in Binary (I32 format) . I have used this for many of my applications and i have found that the data retrieved does not have any "messups".
Why not keep a seperate file for each card? This way, you do not have to load your application with extra process. You only have to acquire and save. After saving in Binbary format, you can retrive it offline, convert it to ascii format and merge the data files of various cards to get one consolidated ascii data file.
hope this helps
Regards
Dev -
Help,
I have a MacBook Pro and would like to upgrade the OS.
My system is 2-3 years old and came with Leopard -
It is up to date with Version 10.5.8 and has a 2.5 GHZ Intel Core 2 duo processor
I have 4GB 667MHZ DDR2 SDRAM memory.
I want to update to Snow Leopard and then maybe Lion.....
It appears my systems is to old to update online. So where can I buy a Snow Leopard disk/s. My local Best Buy does not carry the disk update anymore. Where can I get the disk?
Not to happy with my MAC right now ............. It seems to be poorly supported by APPLE. Am I missing something ?
JimmyYou apparently missed my response.
It can also be found by entering "Store" under the Apple home page, and typing "snow leopard" in the search window. -
How can I stop Firefox from automatically upgrading? My on-line college is not compatible with the upgraded version. I have to keep uninstalling the new one and reinstalling the old one.
It's not a good idea to allow websites to redirect to another site until you know for sure the original site is trustworthy.
But if you still want to do it (again not a good idea).
Tools>Options>Advanced>General - In Accessibility, uncheck "warn me when web sites try to redirect..." option. -
Want to upgrade my processor but dont know what i can go to
I have a HP G60 with an Intel Celeron 900 @ 2.20 Ghz. Thanks for any help
Read through Erico's Laptop Upgrade FAQ HERE
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
hi my daughter has forgotton her password to gettin into her i pad and im not sure of what to do please help
She'll will have to restore the ipad via itunes on a computer. If its the same computer that the ipad was originally synced with then she should be able to reset the password during this process. If unable to do this or restore then follow these instructions:
http://support.apple.com/kb/HT4097
But, all content on ipad will be deleted during restrore. -
HELP! I've upgraded to Firefox 12 (Mac OSX 10.7.3) and everything has gone wrong.
My Fast Dial add-on has disabled and won't reinstall or function as it used to.
When I quit Firefox my tabs won't restore when I reopen Firefox.
The bookmarks toolbar has disappeared and wont' reappear however much I click View>Toolbars>Bookmarks Toolbar.
There's other issues as well. It's too depressing.<u>'''Fast Dial'''</u> -> Try Uninstalling & Reinstalling the extension and Restarting Firefox (a few times). Also see this article -> [[Add-ons are disabled after updating Firefox]]
For further assistance regarding Fast Dial visit the following links:
* Fast Dial extension's homepage on AMO -> https://addons.mozilla.org/en-US/firefox/addon/fast-dial-5721/
* Fast Dial extension's homepage -> http://userlogos.org/frontpage
* Fast Dial extension's support page -> http://userlogos.org/forum/fastdial
<u>'''Restoring Tabs'''</u> -> See these articles:
* [[Firefox does not ask to save tabs and windows on exit]]
* [[Session Restore#w_configuring-session-restore|Configuring Session Restore]]
<u>'''Bookmarks Toolbar'''</u> -> See these articles:
* [[Bookmarks Toolbar]]
* [[Toolbar keeps resetting]]
* Corrupt localstore.rdf -> http://kb.mozillazine.org/Corrupt_localstore.rdf
Report back with the progress of your mentioned problems. Once these are fixed, you can tell us the other problems that you are facing in using Firefox. -
I wanted to upgrade ipod from 4.x til newest ios. And then the trouble startet
It didn´t work out, my pc displayed an error (usbaapl.) and now my ipod is unable to connect to Itunes. It only displays the USB wire, an arrow and Itunes ikon. What should I do ?
What was the exact wording of the error message?
Without knowing that:
- Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try disabling the computer's antivirus and firewall.
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My thanks for the help. Removing iTunes and Bonjur and then reinstalling did the trick!
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...
Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.
Maybe you are looking for
-
Hi guys, I have created a link to Discoverer report in applications that works beautifully but there is one downside in it. When we invoike the report to launch in Discoverer Viewer it opens in the same browser window. Does anyone know how to make it
-
Two user id are being created in BO when user is accessing from Window AD
Hello Team, We are facing a problem in BO XIR3. 1. Where users are login BO through Window AD login. 2. When users are login two idu2019s are being created in BO for that user. 3. One with the same name and another one with appending 0
-
I've searched the forum trying to figure out how I can add captions (actually I would like to use a combination of headline and caption) to photos in a web gallery but only found posts that suggest that this can only be done from iPhoto. I've tried a
-
Strange disc error message- OS 10.4.3 upgrade attempt
In attempting to upgrade from OS10.2.8 to 10.4.3, I get the following error message when running the Disc Utility- Repair Disc from the installation CD-ROM: "Incorrect number of thread records" The disc repair fails and so does the OS installation. T
-
Wifi erratic - or maybe Safari problem?
I've noticed that with Yosemite since the earliest beta I have tried, my WIFI connection has become erratic. By this I mean that I can try to open a page in Safari, and the progress bar gets about 25% of the way across and stops. The WIFI indicator