Hi, plz help me. i wanna store photos to sql database. so how to insert file field into insert record in dreamweaver cs3?
I dont know how to insert file field into insert record in DW. i also want to know, insert dynamic table with image field. Plz help me anyone. Ty..
ohh kk thank you bro. But How to store photos to server file. I wanna upload and display the photos in webpage. Can you send me the php code for this?
Similar Messages
-
HT201263 plz help. my sons ipad is disabled n have no idea how to fix it.
my sons ipad is disabled and i have no idea how to fix it. plzzzz help.
http://support.apple.com/kb/TS1538
For windows use link above.
For mac
http://support.apple.com/kb/TS1591 -
Help needed with secondary DPM backup of SQL databases
I am having difficulties with some SQL databases not backing up to my secondary DPM server. a number of them are in "Replica is inconsistent" state and a few are in "Recovery Point creation failed" state though they are all OK on the
primary DPM server.
The primary server is getting lots of Event ID 4222 errors for MSDPM (DPM has run out of free recovery point space and will fail snapshots) even though the disk allocated looks healthy.
On the primary, VSSADMIN LIST Writers says the DPM Writer is State: [7] Failed and in non-retryable error state but I can't work out why or how to fix it so far.
There are no errors on the secondary other than the failure to backup some databases on the primary.
I am using DPM 2012 R2 on Windows Server 2012 R2 for both primary and secondary.
Any suggestions would be most welcome.
Thanks
MarkThe errors I get on the secondary DPM server are:
Those databases with Replica is Inconsistent
Affected area: <database name>(SQL Server <servername>)
Occurred since: 18/07/2014 16:38:46
Description: The replica of SQL Server 2012 database <database name>(SQL Server <servername>) on <Primary DPM Server> is inconsistent with the protected data source. All protection activities for data source will fail until the replica is
synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
Synchronization for replica of <database name>(SQL Server <servername> on <Primary DPM Server> failed because the replica is not in a valid state or is in an inactive state. (ID 30300 Details: VssError:The writer experienced a non-transient
error. If the backup process is retried,
the error is likely to reoccur.
(0x800423F4))
More information
Recommended action: Review the application event log on the protected computer for errors from the DPM writer service. Take appropriate action and retry the operation.
Synchronize with consistency check.
Run a synchronization job with consistency check...
Resolution: To dismiss the alert, click below
Inactivate
For those databases with Recovery Point creation failed
Affected area: <database name>(SQL Server <servername>)
Occurred since: 18/07/2014 09:05:15
Description: Recovery point creation jobs for SQL Server 2012 database <database name>(SQL Server <servername>) on <Primary DPM Server> have been failing. The number of failed recovery point creation jobs = 74.
If the data source protected has some dependent data sources (like a SharePoint Farm), then click on the Error Details to view the list of dependent data sources for which recovery point creation failed. (ID 3114)
Synchronization for replica of <Database name>(SQL Server) on <Primary DPM Server> failed because the replica is not in a valid state or is in an inactive state. (ID 30300 Details: VssError:The writer experienced a non-transient error.
If the backup process is retried,
the error is likely to reoccur.
(0x800423F4))
More information
Recommended action: Review the application event log on the protected computer for errors from the DPM writer service. Take appropriate action and retry the operation.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate -
Issue with tables :( Plz Help!
Hey all!
Never posted before on this forum and pretty new with
dreamweaver. So I'm having the strangest issue with dreamweaver
tables. I bought a template that I'm modifying by my self which
isnt all that hard haha. But Here's what I ran into. Whenever I put
one table and then another one under it and another one under it
and I insert txt or pics in there and save it, after I upload it
and preview it, I can only see the info from the first table.
Everything else under it, wont show up.
So no matter where and on what page I do it from that
template, if I put more than 1 table down, it'll only show the info
from the first and top table and everything else in other tables
under it, wont show up at all (after I upload it) even thou it
looks good on dreamweaver itself :(
Is there an option to enable or disable something? Plz help,
thank you all!"Unknown7" <[email protected]> wrote:
> So no matter where and on what page I do it from that
template, if I put more
>than 1 table down, it'll only show the info from the
first and top table and
>everything else in other tables under it, wont show up at
all :(
>
> Is there an option to enable or disable something? Plz
help, thank you all!
The bad news is that if you want to do anything remotely
complicated with
Dreamweaver you will have to learn a fair amount about HTML.
I would virtually
guarantee that when you put your new table in something is
going wrong so that
one or other table is not being defined correctly.
As you are modifying someone else's template there is
virtually no way to find
out what is happening other than to examine the HTML. It is
unlikely that
fiddling with any Dreamweaver settings will make any
difference.
Every table should start with something like:
<table width="100%" border="0" cellspacing="0"
cellpadding="5"
bgcolor="#e0e0ff">
<tr align="center" valign="middle">
<td width="9%"><a href="#Bottom">
and end with:
</td>
</tr>
</table>
You can have more or less as many columns as you like in a
table, (<td> ...
</td>
And more or less as many rows ( <tr><td> ...
</td></tr>) as you like, but
unless you get up to special tricks you should have the same
number of columns
in every row. You can put anything you like -- images, more
tables, whatever --
inside a cell e.g.:
<td> image, blah, table </td>,
but you mustn't put any content anywhere else, and every
opening definition
(<table>, <tr>, <td> must have a matching
closing definition in the correct
order.
You can nest tables more or less indefinitely, but
Dreamweaver Design View
sometimes blows its top if you go more than three deep.
HTML usually doesn't produce any error messages, but the
effect of omitting any
of the steps in building a page is quite unpredictable.
Sometimes a major error
will not produce any visible effect, but on other occasions a
minor error will
send the page completely haywire.
You may care to have a look at:
http://www.corybas.com/Technical/Wrapping.htm
This has a series of demonstration pages illustrating what
happens when you try
to display increasingly complicated page layouts on narrow
screens.
Once you have learnt to interpret HTML, you can often learn a
lot by inspecting
the source code for the page (in IE click view, then Source).
This works with
anybody's page, so you can look at the source code for my
pages if you wish.
Clancy -
i have ipod classic,80gb,i cant restorit via itunes and when i click restore i see the error1439 plz help me.is there any software to reset it
Hello adifromba
Try putting your iPod Classic into Disk Mode to force a restore within iTunes to get it to show up. The steps to do that are within the first article below, I have also provided a second article for further troubleshooting if it continues to not show up.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
iTunes: iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Regards,
-Norm G. -
Problems with installing ANT, plz HELP me!!
I have a problem when I install ANT. I can do the build process but I can't do the install process, I got this msg in the cmd:
C:\Program\jwsdp-1_0_01-tutorial\jwsdp-1_0_01\docs\tutorial\examples\gs>ant build
Buildfile: build.xml
init:
prepare:
build:
BUILD SUCCESSFUL
Total time: 0 seconds
C:\Program\jwsdp-1_0_01-tutorial\jwsdp-1_0_01\docs\tutorial\examples\gs>ant install
Buildfile: build.xml
init:
prepare:
build:
install:
BUILD FAILED
Total time: 1 second
C:\Program\jwsdp-1_0_01-tutorial\jwsdp-1_0_01\docs\tutorial\examples\gs\build.xm
l:82: java.io.IOException: Server returned HTTP response code: 401 for URL: http
://localhost:8080/manager/install?path=%2FGSApp&war=file%3AC%3A%5CProgram%5Cjwsd
p-1_0_01%2Fdocs%2Ftutorial%2Fexamples%2FGSApp%2Fbuild
Any1 know about this problem, PLZ help me!!
/ThomasI think you need to create the build.properties file, as documented in:
http://java.sun.com/webservices/docs/1.0/tutorial/doc/GettingStarted2.html#73059
Regards,
Dale Green -
3G iphone won't sync or backup after os4 upgrade! Plz help!
Today is the 1st time I've tried to sync & backup my iphone since updating to the recent os4 software. My phone keeps rebooting in the middle of backing up! I've run a diagnostic and all is well. I've tried restarting my pc but no fix. Everything seems fine up until the backup part then I notice the phone with that circle thingy then it makes that chime sound when u plug it up to charge. So it starts to sync & backup then reboots itself over & over. Has anyone else experienced this problem? Can somebody plz help me? Thanks for any assistance.
rtaylor671,
Try resetting the sync history by going into iSync.
You can get there from your applications folder.
Once you open iSync, go into the preferences of iSync and reset the sync history. -
Hey plz help me...I have downloaded n installed latest version of ios from itunes into my iphone...everything went smoothly but when activation started it says "your iPhone could not be activated because the activation server is temporarily unavailable" plz tell me what to do now I m very much tensed since yesterday!
Contact your Carrier...
However...
This usually happens if the phone has been Hacked / Jailbroken / Modified...
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
If this is the case...You will need to look elsewhere
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum. -
Help Needed!! Working with SQL Databases
Hi All,
I'm currently working on an application that interfaces with an SQL database, and I seem to have ran into a roadblock.
I have a multicolumn list box on my front panel which is filled in with data extracted from the database. On selecting any of the rows in the list box, another one is opened displaying another set of data extracted by a generated SQL query. At the moment I am only selecting one row at a time to view it's related data, but I want to expand such that I can select mutiple rows from the list box at a time and see all of their corresponding data.
With only a single selection, I can pass the index value of the selection to an Index Array Function with the database as the other input and build my SQL statement.
But with multiple selections, I imagine I would have to build an array on index values and use those as a reference to build the SQL statment. And I am not sure how exactly to go about doing that.
Here is the code that I currently have working for a single selection from the list box.
Any help is appreciated. Cheers.
Solved!
Go to Solution.tdog wrote:
Hi All,
I'm currently working on an application that interfaces with an SQL database, and I seem to have ran into a roadblock.
I have a multicolumn list box on my front panel which is filled in with data extracted from the database. On selecting any of the rows in the list box, another one is opened displaying another set of data extracted by a generated SQL query. At the moment I am only selecting one row at a time to view it's related data, but I want to expand such that I can select mutiple rows from the list box at a time and see all of their corresponding data.
With only a single selection, I can pass the index value of the selection to an Index Array Function with the database as the other input and build my SQL statement.
But with multiple selections, I imagine I would have to build an array on index values and use those as a reference to build the SQL statment. And I am not sure how exactly to go about doing that.
Here is the code that I currently have working for a single selection from the list box.
Any help is appreciated. Cheers.
Regarding building the array:
I can see hat you multicolumn listbox has not multiselection enabled, and is limited to one or zero selected item at once. To enable multiselction; simply rightclick your multicolumn listbox and change your selection mode to support multiple selected items. The NewVal at the event structure should change from a single index number to a 1D array of indexed numbers. No coding needed. Then just retrive out all the items (since you know the indexes) and create the quiry. The quiry part I dont really know (long time no see SQL), but it looks like a for loop to create the string should do the trick? -
how to select the download location? its automatically downloading to users folder in c drive.. i wanna change to my desktop...plz help me out...
Tools -> Options -> Save files to -> Click browse button and browse for folder where you want to save the file.
-
my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is laggingmy new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging -
How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!
You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?
-
hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me out. i do have the internet on but it keeps giving me the same problems .. thanks..
Hi Young Prada,
If you are having issues connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden -
App Store Is Not Working ??? plz help
Hey guys I updated my iPod (4th generation) to iOS6.1.2 about 2 weeks ago but suddenly yesterday my App Store stopped working. When I open it it's all blank in features,search,etc?? Plz help how can I make my App Store work ??
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
WINDOW 8 STORE NOT WORKING!!! NEED TO UPDATE TO 8.1 PLZ HELP!!
Hi,
Every time i try to open the store it says it will not connect to the internet, even though i m conncted.
I've tried a million things and it still wont wrk. I dont ussually use the store but i just want Windows 8.1
Plz help!!!Hi AwesomeSauce14,
Do we configure any proxy settings for Internet Connection? Did Windows Store work before?
Please first take a try with the
Apps troubleshooter, if this won't work, please follow the steps below to reset Windows store cache:
a) Press Windows key + X;
b) Select Search,
c) Type in WSReset.exe
d) Then right click on the Wsreset, select Run as administrator;
e) Restart the computer and check.
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
IPhoto 09 can't open my photo library
I've just installed iPhoto 09 on my Mac Mini. When I open iPhoto, I get prompted to upgrade my photo library: "The photo library needs to be upgraded-" I click Upgrade and immediately get a dialog box saying, "There is a problem accessing one or more
-
Error message when trying to transfer iTunes bought songs to iPod
The error message keeps saying "Some of the itunes store files in the itunes library were not copied to ipod because the ipod may only contain content form five itunes store accounts" i only have one account and i've only ever used thhis one account
-
Hierarchical tree in web forms 10g - form freezing
I have an application with an hierarchical tree on one of the forms - the application worked fine as client/server back in forms 6 but now that it is web enabled in 10g there are problems with the tree causing the form to freeze, then the entire appl
-
Please cancel my Adobe CC annual membership
Hi, The 24/7 chat seems to be unavailable every time I try, and I will not stand in a queue for half an hour to talk to someone trying for another half an hour to talk me out of it. Please cancel my annual Adobe CC membership due to renew on June 20t
-
Firefox won't save my Yahoo mail passwords, but Explorer will.
Firefox used to save passwords for yahoo Mail, but lately does not seem to be working. I have 2 mail accounts and passwords with Yahoo. I have read through and clicked all the things about allowing passwords to be saved but nothing is working. I do n