Hi,plz help me,iam not using mozilla bcoz i've problem in opening in my pc,it takes nearly 45 sec to open when i open for th first time after switching on my pc, so i use chrome,opera.plz sugesst some help so that i can start using again my mozilla.

opening mozilla a big headace for me because it load very lately,i have 2gb ram and amd 4800+ processor

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Similar Messages

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestions?

When you signed to be able to post in the forums, you were urged to read and accept the Terms of Use ruling these forums.
They claim :
The contents of the "More Like This" box prove that applying the rules you would have get the wanted explanations without creating this new thread.
Yvan KOENIG (VALLAURIS, France) mardi 26 avril 2011 10:04:03

Time Machine: Repeated errors when backing up for the first time using a new external firewire drive

My Iomega 500GB firewire external drive failed on me last week and I have just replaced it with an identical model. I used to use the old drive with Time Machine on my MacBook Pro running 10.5.8 with no issues, until the drive had a hardware failure and stopped spinning up, hence the replacement.
Two days ago I tried using Time Machine for the first time with the replacement external drive. The backup failed and each subsequent backup attempt has failed since then with a different error each time. The drive cannot be ejected using Finder (Finder says disk is in use and cannot be ejected even when no processes are running except for Finder and Time Machine has been disabled), by dragging it to the dock (hangs computer which can only be fixed by a hard reboot), in Disk Utilities (drive cannot be unmounted) or in Terminal ("no such file or directory").
The first backup attempt failed after 3 hours of "preparing" with the message "The backup was not performed because an error occured while creating backup directory".
I tried repairing the disk in Disk Utilities and Disk Utilities said the drive was OK ("the volume Time Machine Backups appears to be OK"). I tried ejecting the drive (hard reboot of computer and disconnecting the drive), plugging it back in again and trying again.
This time it started backing up, then failed after a few minutes with the message "an error occured while copying files to the backup volume". I had a look at the troubleshooting suggested on http://web.me.com/pondini/Time_Machine/C3.html and followed instructions. It failed again, so I did a full reset as per http://web.me.com/pondini/Time_Machine/A4.html.
It failed again, so I tried reparing the drive again in Disk Utilities and again it said it was OK. I tried using different cables and ports (Firewire 400 instead of Firewire 800), and backups still fail.
I have turned off anti-virus scanning (Sophos). I have tried excluding it from Spotlight but this causes an error message from Spotlight. I have tried trashing the com.apple.TimeMachine.plist file and rebooting. I have tried selecting deselecting the drive as the back up in Time Machine preferences, selecting "None", then "Stop Backing Up" then quitting preferences, rebooting, disconnecting the drive, reconnecting the drive and selecting the drive again as the backup disk in Time Machine preferences. I have tried erasing the drive completely, rebooting, and trying to back up again.
None of these have worked. This is a brand new drive and I do not want to have to replace it again if I do not have to.
Does anyone have any suggestions? Thank you.

Hello, some possible clues...
Should you click “Start New Backup”? Not yet! If you see the dialog above, your existing Time Machine backup is corrupt, and you might not be able to recover data from it. But you can save a copy of the corrupt bundle and, perhaps, extract some data from it if needed.
Ask yourself if Time Machine has saved data you might need before deciding what to do next:
If you are sure you won’t need anything backed up before today, click “Start New Backup” and let Time Machine do its thing.
Otherwise, click “Back Up Later” and save a copy before letting Time Machine start a new backup. Just look for a file called “computername.sparsebundle” (for network backups) or “Backups.backupdb” (for local ones) and create a copy with a different name. You can open sparsebundle files with DiskImageMounter and browse them like any other disk. More information is available here.
There you go. If you click “Start New Backup” when you see this dialog box, Time Machine will erase all of your old backup data and start a new bundle. It won’t be corrupt, but it will be empty.
Note that you can manually initiate a Time Machine backup integrity check by option-clicking the “Time Machine” icon in the menu bar and selecting “Verify Backups.”
http://blog.fosketts.net/2010/08/11/time-machine-completed-verification-backups- improve-reliability-time-machine-create-backup/
According to This Time Machine resource “This appears only on Snow Leopard, and started with the Time Capsule Backup Update 1.0 in mid-May of 2010. It also seems to have been included in the 10.6.3 v1.1 update and 10.6.4.”
So, what can you do about it? Grin and bear it, it seems, until Apple fixes it.
One thing you can do to make the backup take less time is to connect your machine to your Time Capsule or other backup drive via Ethernet for the duration of the initial backup.
http://www.theinternetpatrol.com/the-dreaded-time-machine-has-completed-a-verifi cation-of-your-backups-to-improve-reliability-time-machine-must-create-a-new-ba c kup-for-you-message-and-why-you-are-seeing-it/
Time Machine: About "Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."...
http://support.apple.com/kb/HT4076
Or a different/better solution in my experiences...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/products/tribackup.html

Help - Crackled sound using the speakers for the first time after wake up?!

I've a new white MacBook since Monday.
The problem is:
After turning on oder waking up the notebook, I want to play a sound or music. The first time the speakers are used, the sound is very weak and crackled, but after two seconds or so it's ok again.
The same happens if the first sound is the emptying-sound of the trash or every other sound.
This happens every time I start the computer.
Has anyone the same problem?
Thank you in advance!
Greetings form Switzerland
Message was edited by: Dominik Huber

Many people have experienced this, usually when using auxiliary speakers. It happens with my desktop on booting. It's very normal.
You might find this workaround useful and effective:
https://bugs.launchpad.net/ubuntu/source/linux-source-2.6.20/bug/75906

Page with PartialTriggers is not working when it loads for the first time

Hi All,
I am experiencing unexpected behavior when using partial triggers and this recurres every time the page loads and the second time it works fine.
Here is the requirement, The page has a check box, when checked, two text boxes should be disabled. When unchecked the two fields should be enabled.
(The fields are Start Date Time and End Date Time in the code below). I am also handiling the Date Validations on value change listener of Start Date time and have no issues on that.
When I try to enter the dates on page load (The check box - "Process Full Indicator" is not selected), I enter the required fields (PEID, Dates and check the Process IAF and Process SMS check boxes and click on the ProcessRFI Button, the date fields are emptied and nothing happens. When i redo the same thing the second time, it works.
The button invokes a BEPL process.
One of the links suggested that I use the partialTrigger tag in the parent layout, I used in the panelFormLayout and it sill did not reflect.
I am facing the same issue in an other page that is reteriving data from a DB Table. As I notice, both the pages are invoking dataControlls. Not too sure if it is related.
Kindly help.
<af:panelFormLayout id="pfl1"
inlineStyle="font-weight:bold; height:181px;"
>
<af:inputText value="#{bindings.PEID.inputValue}"
label="PEID"
required="#{bindings.PEID.hints.mandatory}"
columns="#{bindings.PEID.hints.displayWidth}"
maximumLength="#{bindings.PEID.hints.precision}"
shortDesc="#{bindings.PEID.hints.tooltip}" id="it1"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.PEID.validator}"/>
</af:inputText>

<af:inputDate value="#{bindings.StartDateTime.inputValue}"
label="Start Date Time"
shortDesc="#{bindings.StartDateTime.hints.tooltip}"
id="id1" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_startDate}"
valueChangeListener="#{backing_ProcessRFI.assignFromDateValue}"
autoSubmit="true"
required="true" immediate="true">
<f:validator binding="#{bindings.StartDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.StartDateTime.format}" type="both"/>
</af:inputDate>
<af:inputDate value="#{bindings.EndDateTime.inputValue}"
label="End Date Time"
shortDesc="#{bindings.EndDateTime.hints.tooltip}"
id="id2" inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.input_endDate}"
partialTriggers="id1"
required="true"
valueChangeListener="#{backing_ProcessRFI.checkNullStartDateValue}"
autoSubmit="true" immediate="true">
<af:validateDateTimeRange minimum="#{backing_ProcessRFI.dtFromDate}"
hintMinimum="End date should be greater than the Start Date"
/>
<f:validator binding="#{bindings.EndDateTime.validator}"/>
<af:convertDateTime pattern="#{bindings.EndDateTime.format}" type="both"/>
</af:inputDate>
<af:selectBooleanCheckbox value="#{bindings.ProcessIAFIndicator.inputValue}"
label="Process IAF"
required="#{bindings.ProcessIAFIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessIAFIndicator.hints.tooltip}"
id="it2"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessIAFIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessSMSIndicator.inputValue}"
label="Process SMS"
required="#{bindings.ProcessSMSIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessSMSIndicator.hints.tooltip}"
id="it5"
inlineStyle="font-weight:bold;">
<f:validator binding="#{bindings.ProcessSMSIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:selectBooleanCheckbox value="#{bindings.ProcessFullIndicator.inputValue}"
label="Process Full Indicator"
required="#{bindings.ProcessFullIndicator.hints.mandatory}"
shortDesc="#{bindings.ProcessFullIndicator.hints.tooltip}"
id="it4"
inlineStyle="font-weight:bold;"
binding="#{backing_ProcessRFI.processFullIndicator}"
valueChangeListener="#{backing_ProcessRFI.handleFullIndicator}"
autoSubmit="true">
<f:validator binding="#{bindings.ProcessFullIndicator.validator}"/>
</af:selectBooleanCheckbox>
<af:panelStretchLayout id="psl1" inlineStyle="height:40px;">
<f:facet name="center">
<af:panelGroupLayout layout="horizontal"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
id="pgl2">
<af:commandButton actionListener="#{bindings.ProcessRFI.execute}"
text="Process RFI"
disabled="#{!bindings.ProcessRFI.enabled}"
id="cb2"
attributeChangeListener="#{ProcessRFI.processResult}"/>
<af:resetButton text="Clear" id="rb1"/>
<f:facet name="separator">
<af:spacer width="10" height="10" id="s2"/>
</f:facet>
</af:panelGroupLayout>
</f:facet>
</af:panelStretchLayout>
</af:panelFormLayout>

Hi John,
My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
Kindly advice,
Thanks,
Ram

My mac is freezing on start up. its brand new just opened for the first time. installed the updates and it froze. can anyone help?

My new mac is freezing on start up. after the initial start up, i did software updates and now its frozen. can anyone help?

If this is really a NEW Macbook Pro and this happened the first time you turned it on and did Software Updated then you need to take it back to where you bought it and RETURN IT FOR A FULL REFUND. Then decide whether to buy another NEW unit or move on to something else.
Apple has a No Questions Asked 14 day return policy. Take advantage of that and return this unit. This type of thing should NOT happen on a Brand new notebook.

You are opening for the first time, but I'm not

Recently I have been getting this message sporadically with some applications after a restart. Parallels even asks to be re activated sometimes. Also, more often than not after a restart my Safari home page has defaulted back to the apple web site.
I have done a complete reinstall of the OS from the retail SL disk and run the software updater. I have repaired permissions and verified the disk. Lastly I have dumped the com.apple.luanchservice.plst and cache.
Please... any other suggestions. Its a macbook pro.

OK, I can concede this point. You need to disable APE when you do an install or update.
I have gradually got used to the lack of Fruitmenu. For my workflow its main function is available on the sidebar. My objection to the sidebar is that it is on every open window and constitutes a waste of space.
HoudaSpot is an excellent remedy for the loss for the shortcut for find-by-file-name in ML.
Does anybody know of a way to replace the functionallity of WindowShade, which is the only OS9.2 feature I still find indispensible?????????????????????????????????
Apple's minimize function is inferior to Windows because the minimized items are tiny due to sharing dock space with all the other things you have in the dock. However, I think it unlikely that Apple will return the functionallity of the dock back to the Apple Menu and provide a Windows-esque minimization function. This is why WindowShade is an actual requirement on an Apple OS, not just a mere whim.

Scroller not appearing in the popup when opened for the second time

Hi,
I have a popup window which has three tabs A, B, and C. My tab A has BorderContainer > Scroller > Vgroup
When opened for the first time, I can see the scroller. But , when opened for the second time, the scroller does not appear and the content in th Border container seems truncated.
Please help.

No answers, but I may be seeing something similar.
I'm converting a project from Flex 3 to 4. In a popup (Spark TitleWindow) I have a some TabNavigators. On subsequent openings of the popup, the contents of the navigator children don't always render. After some changing of various Halo components to their Spark equivalents, I thought the problem had gone away. But the problem seems to have come back.
In my case, I'm not sure if the "subsequent opening" is the key issue. Sometimes, the contents of nested TabNaviagtor children don't render on the first opening. although the first child content always renders. But the problem seems to increase in subsequent openings. (I.e. more children of TabNavigators don't render.)
Perhaps not connected, but I notice when this happens, the outside borders of dataGrid components don't render in components outside of TabNavigators. I suspect there's a simple thing I need to to do to fix this, but I haven't found it. Any hints or insights would be welcomed.

When Webdynpro popup is opened for the 2nd time, image is not shown

Hi Experts,
We have created a WebDynpro with a popup window.
This is shown in an iView in the portal.
If the popup is opened for the first time it looks good.
If the popup is opened for the 2nd time the image is not shown and the title is shown with a different font.
If we do a preview of the iView in PCD content area, the title and image is shown and the right font is used: also when you open this for the second time.
If the iView is in a role the problem appears.
How can this be solved?
Thanks in advance,
Joeri

Sounds like a wrong reference to a stylesheet.
Use IE Developer Toolbar or Firefox to debug the code. Or view source (of the popup) and search for .css. Do the same for the popup that doesn't work. Check if there are differences.
Good luck!
Noel

I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?

I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - help?

Hi - just using the new iMovie for the first time - apparently there should be a sidebar containing tools like "Content Library". Not on mine - even in Window view, Content Library features like text etc are all greyed out - obviously it's me - anyone help please?

Sorry - I should have added that I have imported a Quicktime movie, originally created as an iPhoto slideshow.
I want to create rolling credits at the movie end and apparently you can only do this using iMovie - can you help please?

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you.

I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

dis the activation server is not available try again later or contact tech support.
has no sim card installed more already tried with the sim card still not of.
bought in china.

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

I tried to use the iPhone hot spot feature for the first time to use my kindle outside. I followed the directions n I saw the network came up I used my password and I could not connect. What am I'm doing wrong. Please help

Help: I want to auto schedule a load using file watcher but it runs only once for the first time and after that it is not running at all

Hi All,
I am trying to execute the below code as provided from one of the blogs. i am able to run the job only once based on a file watcher object(i.e. for very first time) and after that the job is not running at all and if i schedule the job to run automatically based on interval of 10 or more minutes it is executing properly). Please let me know or guide me if i have missed any step or configuration.that is needed.
Version of Oracle 11.2.0.1.0
OS : Windows 7 Prof
Given all the necessary privileges
BEGIN
DBMS_SCHEDULER.CREATE_CREDENTIAL(
     credential_name => 'cred',
     username        => 'XXXX',
     password        => 'XXXX');
END;
CREATE TABLE ZZZZ (WHEN timestamp, file_name varchar2(100),
   file_size number, processed char(1));
CREATE OR REPLACE PROCEDURE YYYY
(payload IN sys.scheduler_filewatcher_result) AS
BEGIN
INSERT INTO ZZZZ VALUES
     (payload.file_timestamp,
      payload.directory_path || '/' || payload.actual_file_name,
      payload.file_size,
      'N');
END;
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
    program_name        => 'prog1',
    program_type        => 'stored_procedure',
    program_action      => 'YYYY',
    number_of_arguments => 1,
    enabled             => FALSE);
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
    program_name        => 'prog1',
    metadata_attribute => 'event_message',
    argument_position   => 1);
DBMS_SCHEDULER.ENABLE('prog1');
END;
BEGIN
DBMS_SCHEDULER.CREATE_FILE_WATCHER(
    file_watcher_name => 'file_watcher1',
    directory_path    => 'D:\AAAA',
    file_name         => '*.txt',
    credential_name   => 'cred',
    destination       => NULL,
    enabled           => FALSE);
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
    job_name        => 'job1',
    program_name    => 'prog1',
    queue_spec      => 'file_watcher1',
    auto_drop       => FALSE,
    enabled         => FALSE);
DBMS_SCHEDULER.SET_ATTRIBUTE('job1','PARALLEL_INSTANCES',TRUE);
END;
EXEC DBMS_SCHEDULER.ENABLE('file_watcher1,job1');
Regards,
kumar.

Please post a copy and paste of a complete run of a test case, similar to what I have shown below.
SCOTT@orcl12c> SELECT banner FROM v$version
2 /
BANNER
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
PL/SQL Release 12.1.0.1.0 - Production
CORE    12.1.0.1.0    Production
TNS for 64-bit Windows: Version 12.1.0.1.0 - Production
NLSRTL Version 12.1.0.1.0 - Production
5 rows selected.
SCOTT@orcl12c> CONN / AS SYSDBA
Connected.
SYS@orcl12c> -- set file watcher interval to one minute:
SYS@orcl12c> BEGIN
2    DBMS_SCHEDULER.SET_ATTRIBUTE
3       ('file_watcher_schedule',
4        'repeat_interval',
5        'freq=minutely; interval=1');
6 END;
7 /
PL/SQL procedure successfully completed.
SYS@orcl12c> CONNECT scott/tiger
Connected.
SCOTT@orcl12c> BEGIN
2    -- create credential using operating system user and password (fill in your own):
3    DBMS_SCHEDULER.CREATE_CREDENTIAL
4       (credential_name     => 'cred',
5        username          => '...',
6        password          => '...');
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- create table to insert results into:
SCOTT@orcl12c> CREATE TABLE ZZZZ
2    (WHEN      timestamp,
3      file_name varchar2(100),
4      file_size number,
5      processed char(1))
6 /
Table created.
SCOTT@orcl12c> -- create procedure to insert results:
SCOTT@orcl12c> CREATE OR REPLACE PROCEDURE YYYY
2    (payload IN sys.scheduler_filewatcher_result)
3 AS
4 BEGIN
5    INSERT INTO ZZZZ VALUES
6        (payload.file_timestamp,
7         payload.directory_path || '/' || payload.actual_file_name,
8         payload.file_size,
9         'N');
10 END;
11 /
Procedure created.
SCOTT@orcl12c> -- create program, define metadata, and enable:
SCOTT@orcl12c> BEGIN
2    DBMS_SCHEDULER.CREATE_PROGRAM
3       (program_name          => 'prog1',
4        program_type          => 'stored_procedure',
5        program_action      => 'YYYY',
6        number_of_arguments => 1,
7        enabled          => FALSE);
8    DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT(
9       program_name         => 'prog1',
10       metadata_attribute => 'event_message',
11       argument_position   => 1);
12    DBMS_SCHEDULER.ENABLE ('prog1');
13 END;
14 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create file watcher:
3    DBMS_SCHEDULER.CREATE_FILE_WATCHER
4       (file_watcher_name   => 'file_watcher1',
5        directory_path      => 'c:\my_oracle_files',
6        file_name          => 'f*.txt',
7        credential_name     => 'cred',
8        destination          => NULL,
9        enabled          => FALSE);
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> BEGIN
2    -- create job:
3    DBMS_SCHEDULER.CREATE_JOB
4       (job_name          => 'job1',
5        program_name          => 'prog1',
6        queue_spec          => 'file_watcher1',
7        auto_drop          => FALSE,
8        enabled          => FALSE);
9    -- set attributes:
10    DBMS_SCHEDULER.SET_ATTRIBUTE ('job1', 'PARALLEL_INSTANCES', TRUE);
11 END;
12 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- enable:
SCOTT@orcl12c> EXEC DBMS_SCHEDULER.enable ('file_watcher1, job1');
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- write file (file must not exist previously):
SCOTT@orcl12c> CREATE OR REPLACE DIRECTORY upncommon_dir AS 'c:\my_oracle_files'
2 /
Directory created.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file1.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
1 row selected.
SCOTT@orcl12c> declare
2    filtyp utl_file.file_type;
3 begin
4    filtyp := utl_file.fopen ('UPNCOMMON_DIR', 'file2.txt', 'W', NULL);
5    utl_file.put_line (filtyp, 'File has arrived ' || SYSTIMESTAMP, TRUE);
6    utl_file.fclose (filtyp);
7 end;
8 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- wait long enough (may take more than one minute) for job to run:
SCOTT@orcl12c> EXEC DBMS_LOCK.SLEEP (100)
PL/SQL procedure successfully completed.
SCOTT@orcl12c> -- check for results:
SCOTT@orcl12c> SELECT * FROM zzzz
2 /
WHEN
FILE_NAME
FILE_SIZE P
22-OCT-13 10.12.28.309000 PM
c:\my_oracle_files/file1.txt
        57 N
22-OCT-13 10.14.08.580000 PM
c:\my_oracle_files/file2.txt
        57 N
2 rows selected.

Hi,plz help me,iam not using mozilla bcoz i've problem in opening in my pc,it takes nearly 45 sec to open when i open for th first time after switching on my pc, so i use chrome,opera.plz sugesst some help so that i can start using again my mozilla.

Similar Messages

Maybe you are looking for