Hi plz send the line of abap forums
hi all ,
plz send the link of abap forums
hi naren
http://www.sapfans.com/forums/viewforum.php?f=13
http://www.sapdevelopment.co.uk/
http://www.thespot4sap.com/forums/ABAP/forumid_35/tt.htm
http://www.sap-img.com/abap/abap-question.htm
hope this helps
Regards
Alfred
Similar Messages
-
How can i check if the lines are the same ?
private bool displayed;
private void PostMessage()
for (int i = 0; i < ScrollLabel._lines.Length; i++)
for (int x = 0; x < WordsList.words.Length; x++)
if (ScrollLabel._lines[i].Contains(WordsList.words[x]) && !displayed)
displayed = true;
lineToPost = ScrollLabel._lines[i];
PostFacebookWall(LongaccessToken, lineToPost + Environment.NewLine + Environment.NewLine + "נשלח באופן אוטומטי כניסיון דרך תוכנה");
I call this method in a timer tick event every second.
But if the variable string lineToPost is
identical it will not send it again. But it might be a situation that the lineToPost may
contain the exact same word inside but the whole line is not the same so i want to send it.
Only if the whole line is the same, then don't make the postFacebookWall
If the whole line is not the same but the same word is the line as in other line(s), then use thePostFacebookWall method.
I'm using a bool variable
so it will not send the same line over and over again.
I would like it to send the line(s) once, regardless if there is only one line or if there are more than one line.
The problem is the way I'm using the bool now,
it will send a line and then will never send any other line at all.
I tried to change the method to this:
// key: line index, value: sent line
private Dictionary<int, string> sent = new Dictionary<int, string>();
private void PostMessage()
for (int i = 0; i < ScrollLabel._lines.Length; i++)
var line = ScrollLabel._lines[i];
if (sent.ContainsKey(i) && sent[i] == line) continue;
sent[i] = line;
if (WordsList.words.Any(line.Contains))
PostFacebookWall(LongaccessToken, line + Environment.NewLine + Environment.NewLine
+ "נשלח באופן אוטומטי כניסיון דרך תוכנה");
numberofposts += 1;
label7.Text = numberofposts.ToString();
But its not good it keep sending many times the same lines.
This is the timer tick event code:
private void timer1_Tick(object sender, EventArgs e)
counter += 1;
if (counter == 10)
scrollLabel1.Reset();
scrollLabel1.Text = " ";
scrollLabel1.Invalidate();
readableRss = RssReader.covertRss("http://rotter.net/rss/rotternews.xml");
this.scrollLabel1.Text = readableRss;
scrollLabel1.Invalidate();
counter = 0;
PostMessage();
Im updating the text/lines every 10 seconds .
And calling the PostMessage method every second.
And when im calling the PostMessage it should it should call inside the method PostFacebookWall only when the whole line is not identical to other lines and if a word in words is exist in any line.
The variable WorldList.words is string[] contain some words(string).
For example if i have this line:
"hello this is a test"
So the word test exist in words so post this line.
Then if i have another line :
"hello this is a test" so in dont post this line since its the same.
But if i have a line: "hi this is a test" the word test exist but the whole line is not the same as above so post this line.
And of course if there is a different line with a word that exist like: "my name"
Then post this line too.Hi Chocolade1972,
C# forum:
Discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools.
I’m afraid that it is not the correct forum about this issue, I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Deleting line from ABAP screen..
Hello,
I have a ABAP report when excuted, showsn mulpiple reords one by one wirtten on screen using write statement along with checkboxes besides it and I am also appending an internal table with these values.
Now, User can select the check boxes for the line records. Also there is a delete button in the application toolbar.
Now, when the delete button is executed, I want the lines which are selected on the ABAP output screen to be deleted so that only records which were not selected using check box will be shown.
I know for this I have to code in AT-User command but how do we delete the lines from ABAP screen.
AT user-command.
CASE SY-UCOMM.
WHEN 'DELETE'.
ENDCASE
Regards,
Jainam.Hello,
Based on which ever field is selected you can delete from the internal table and then refresh the ALV.
Hope it helps.
Regards,
Nabheet Madan -
Can anyone plz send HTTP to RFC scenario
Hi everyone,
can u guys send me the HTTP to RFC scenario? plz send the detail scenario for HTTP-XI-RFC.
thank u in advance
xilearner1.Created data types for mapping with HTTP request and response.
2. Created messsage types and assigned corresponding data types to the message types.
3. Created one Message Interface (Outbound/Synchronous) for HTTP type and no need to create interface for RFC. You ca use the one which you have imported from R/3.
4. Create request and response message mapping and one Inteface mapping (with request tab and response tab) properly assigned.
Defined the following in ID:
1. Created HTTP business system (no communication channel)
2. Created communication channel for receiving system (SAP).
3. Created receiving determination and interface determination, receiver agreement, no sender agreement.
Check this link on how to configure RFC channel.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Send XML message from HTTP client and you will see the response in the same.
Regards,
Sudheer. -
Editing a post with '#' cuts the rest of the line
I don't know if it my error,
When I edit a post where inside there is a #(pound character) trailers character after it cut off. (It happens, above all, in links)
Is it my error? if yes, how can avoid it?
and excuse me for simply question,
How can I write a link as questo link instead of http://.........
what are character prefix; before and after
Thanks for help
RegardsOk thanks anyway I solved.
I found answer from PaulM. (thanks Paolo)
I just wondered how I can post links in these messages. I saw other people doing it. So instead of typing the URL making it a real hyperlink like in a normal html page.
Editing a post with '#' cuts the rest of the line
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread
[url http://forums.oracle.com/forums/post!reply.jspa?messageID=1793743]This thread[url -
Plz send me the code of interctive ALV report
Hi
plz send me the code of interctive ALV report
thanks in advance
rachuHi
<u><b>For More alv report examples check these Tcodes <i>LIBS, BIBS</i>Here u can find more number of examples on alv reports of different kinds</b></u>
Check this sample code
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
* declaration for events table where user comand or set PF status will
* be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
* declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
* declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
* Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
* we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
* Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
* retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
* text
* -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
* text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
* I_GRID_SETTINGS =
* IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* i_default = 'ZLAY1'
I_SAVE = 'A'
* is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
* text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
* i_logo =
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->, text
* -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
* text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
* we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
* Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
* text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
* i_logo =
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->, text
* -->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
* I_GRID_SETTINGS =
* IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT =
I_SAVE = 'A'
* IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Try this links...
http://www.****************/Tutorials/ALV/ALVMainPage.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Reward all helpful answers
Regards
Pavan
Message was edited by:
Pavan praveen -
HI I am attending an interview in tcs in sap abap plz send me interivew que
Hi I am attending tcs interivew this week plz send me interivew questions wht they ask ,,,my id is [email protected] ,,,, than k u,,,
Hi,,
Please find a few collection of my interview ques..
Mark if useful..
1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
Following are some of the answers which I gave upto my knowledge.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table contains vertical and horizontal lines. We can store the data in table as blocks. We can scroll depends upon your wish. And these all are stored in database (data dictionary).
Which contain the details of all the name of the programs and forms? (I don't know).
13) How did you test the form u developed? How did you taken print?
14) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
A pooled table is used to combine several logical tables in the ABAP/4 dictionary. Pooled tables are logical tables that must be assigned to a table pool when they are defined.
Cluster table are logical tables that must be assigned to a table cluster when they are defined.
Cluster table can be used to store control data they can also used to store temporary data or text such as documentation.
17) What is pf-status?
Pf status is used in interactive report for enhancing the functionality. If we go to se41, we can get menus, items and different function keys, which we are using for secondary list in interactive report.
18) Among "Move" and "Move Corresponding", which is efficient one?
I guess, 'move corresponding' is very efficient then 'move' statement. Because usually we use this stamtent for internal table fields only...so if we give move corresponding. Those fields only moving to other place (what ever you want).
19) What are the output type and Tcodes?
20) Where we use Chain and End chain?
21) Do you use select statement in loop end loop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
SAP ABAP interview questions
Thanks to the reader who sent in this question set:
1. What is an ABAP data dictionary?- ABAP 4 data dictionary describes the logical structures of the objects used in application development and shows how they are mapped to the underlying relational database in tables/views.
2. What are domains and data element?- Domains:Domain is the central object for describing the technical characteristics of an attribute of an business objects. It describes the value range of the field. Data Element: It is used to describe the semantic definition of the table fields like description the field. Data element describes how a field can be displayed to end-user.
3. What is foreign key relationship?- A relationship which can be defined between tables and must be explicitly defined at field level. Foreign keys are used to ensure the consistency of data. Data entered should be checked against existing data to ensure that there are now contradiction. While defining foreign key relationship cardinality has to be specified. Cardinality mentions how many dependent records or how referenced records are possible.
4. Describe data classes.- Master data: It is the data which is seldomly changed. Transaction data: It is the data which is often changed. Organization data: It is a customizing data which is entered in the system when the system is configured and is then rarely changed. System data:It is the data which R/3 system needs for itself.
5. What are indexes?- Indexes are described as a copy of a database table reduced to specific fields. This data exists in sorted form. This sorting form ease fast access to the field of the tables. In order that other fields are also read, a pointer to the associated record of the actual table are included in the index. Yhe indexes are activated along with the table and are created automatically with it in the database.
6. Difference between transparent tables and pooled tables.- Transparent tables: Transparent tables in the dictionary has a one-to-one relation with the table in database. Its structure corresponds to single database field. Table in the database has the same name as in the dictionary. Transparent table holds application data. Pooled tables. Pooled tables in the dictionary has a many-to-one relation with the table in database. Table in the database has the different name as in the dictionary. Pooled table are stored in table pool at the database level.
7. What is an ABAP/4 Query?- ABAP/4 Query is a powerful tool to generate simple reports without any coding. ABAP/4 Query can generate the following 3 simple reports: Basic List: It is the simple reports. Statistics: Reports with statistical functions like Average, Percentages. Ranked Lists: For analytical reports. - For creating a ABAP/4 Query, programmer has to create user group and a functional group. Functional group can be created using with or without logical database table. Finally, assign user group to functional group. Finally, create a query on the functional group generated.
8. What is BDC programming?- Transferring of large/external/legacy data into SAP system using Batch Input programming. Batch input is a automatic procedure referred to as BDC(Batch Data Communications).The central component of the transfer is a queue file which receives the data vie a batch input programs and groups associated data into "sessions".
9. What are the functional modules used in sequence in BDC?- These are the 3 functional modules which are used in a sequence to perform a data transfer successfully using BDC programming: BDC_OPEN_GROUP - Parameters like Name of the client, sessions and user name are specified in this functional modules. BDC_INSERT - It is used to insert the data for one transaction into a session. BDC_CLOSE_GROUP - This is used to close the batch input session.
10. What are internal tables?- Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
11. What is ITS? What are the merits of ITS?- ITS is a Internet Transaction Server. ITS forms an interface between HTTP server and R/3 system, which converts screen provided data by the R/3 system into HTML documents and vice-versa. Merits of ITS: A complete web transaction can be developed and tested in R/3 system. All transaction components, including those used by the ITS outside the R/3 system at runtime, can be stored in the R/3 system. The advantage of automatic language processing in the R/3 system can be utilized to language-dependent HTML documents at runtime.
12. What is DynPro?- DynPro is a Dynamic Programming which is a combination of screen and the associated flow logic Screen is also called as DynPro.
13. What are screen painter and menu painter?- Screen painter: Screen painter is a tool to design and maintain screen and its elements. It allows user to create GUI screens for the transactions. Attributes, layout, filed attributes and flow logic are the elements of Screen painter. Menu painter: Menu painter is a tool to design the interface components. Status, menu bars, menu lists, F-key settings, functions and titles are the components of Menu painters. Screen painter and menu painter both are the graphical interface of an ABAP/4 applications.
14. What are the components of SAP scripts?- SAP scripts is a word processing tool of SAP which has the following components: Standard text. It is like a standard normal documents. Layout sets. - Layout set consists of the following components: Windows and pages, Paragraph formats, Character formats. Creating forms in the R/3 system. Every layout set consists of Header, paragraph, and character string. ABAP/4 program.
15. What is ALV programming in ABAP? When is this grid used in ABAP?- ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
16. What are the events in ABAP/4 language?- Initialization, At selection-screen, Start-of-selection, end-of-selection, top-of-page, end-of-page, At line-selection, At user-command, At PF, Get, At New, At LAST, AT END, AT FIRST.
17. What is CTS and what do you know about it?- The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems and clients in your system landscape. This documentation provides you with an overview of how to manage changes with the CTS and essential information on setting up your system and client landscape and deciding on a transport strategy. Read and follow this documentation when planning your development project.
18. What are logical databases? What are the advantages/ dis-advantages of logical databases?- To read data from a database tables we use logical database. A logical database provides read-only access to a group of related tables to an ABAP/4 program. Advantages: i)check functions which check that user input is complete, correct,and plausible. ii)Meaningful data selection. iii)central authorization checks for database accesses. iv)good read access performance while retaining the hierarchical data view determined by the application logic. dis advantages: i)If you donot specify a logical database in the program attributes,the GET events never occur. ii)There is no ENDGET command,so the code block associated with an event ends with the next event statement (such as another GET or an END-OF-SELECTION).
19. What is a batch input session?- BATCH INPUT SESSION is an intermediate step between internal table and database table. Data along with the action is stored in session ie data for screen fields, to which screen it is passed, program name behind it, and how next screen is processed.
20. How to upload data using CATT ?- These are the steps to be followed to Upload data through CATT: Creation of the CATT test case & recording the sample data input. Download of the source file template. Modification of the source file. Upload of the data from the source file.
21. What is Smart Forms?- Smart Forms allows you to create forms using a graphical design tool with robust functionality, color, and more. Additionally, all new forms developed at SAP will be created with the new Smart Form solution.
22. How can I make a differentiation between dependent and independent data?- Client dependent or independent transfer requirements include client specific or cross client objects in the change requests. Workbench objects like SAPscripts are client specific, some entries in customizing are client independent. If you display the object list for one change request, and then for each object the object attributes, you will find the flag client specific. If one object in the task list has this flag on, then that transport will be client dependent.
23. What is the difference between macro and subroutine? - Macros can only be used in the program the are defined in and only after the definition are expanded at compilation / generation. Subroutines (FORM) can be called from both the program the are defined in and other programs . A MACRO is more or less an abbreviation for some lines of code that are used more than once or twice. A FORM is a local subroutine (which can be called external). A FUNCTION is (more or less) a subroutine that is called external. Since debugging a MACRO is not really possible, prevent the use of them (I've never used them, but seen them in action). If the subroutine is used only local (called internal) use a FORM. If the subroutine is called external (used by more than one program) use a FUNCTION.
Rajiv -
Need HR- ABAP documentation plz provide the links
Need HR- ABAP documentation plz provid the links
Hi,
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Take a look over these links....
http://www.sap-basis-abap.com/saphr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
http://www.saptips.com/Previews/SAPtipsAugust-September2004TableOfContents.pdf
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
http://help.sap.com/saphelp_46c/helpdata/en/4f/d528be575e11d189270000e8322f96/frameset.htm.
http://www.sap-basis-abap.com/saphr.htm.
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/workflow/scenarios.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.sapgenie.com/mysap/mysap_hr.htm
Re: remunaration statement
Go through the SAp doc for HR programming and start doing.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
BDC - hr maintain text
HR
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.erpgenie.com/faq/hr.htm.
www.sap-img.com
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapfans.com/forums/viewtopic.php?p=498530&sid=d7ec5866e3fb26880da129de45ce79de
http://www.sapcookbook.com/preview_hr_questions.htm
http://www.atomhr.com/library_full.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983590,00.html
http://www.allsaplinks.com/HRmaterial.html
http://www.allsaplinks.com/timemanagement.html
http://www.allsaplinks.com/payrollcompletefunctional.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/HRINF/HRINF.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYXXFORM/PYINT_FORMBUILDER.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPA/BCBMTWFMPA.pdfhttp://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_HR.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
Re: New to ABAP HR Programming
http://www.planetsap.com/hr_abap_main_page.htm
http://www.saptips.com/Previews/SAPtipsAugust-September2004TableOfContents.pdf
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/workflow/scenarios.htm
http://www.sapgenie.com/mysap/mysap_hr.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
Regards,
Chandru -
I am set to send my top of the line HP pc in for repair
i am set to send my top of the line HP pc in for repair . im very pleased with HP as useual . i bought my HP AMD FX(tm)-8150 Eight-Core Processor with 8 gig ram 1 gig video card and all the good stuff over 1 year ago . i had blue screen problems from the begining . and i suspected it was a hareware issue and HP service was thinkoing it was software . so i was stuck with a top of the line pc with problems that could not be solved . but i didnt quit on HP i know they would help if i could just prove my solution was in fact hardware ., so months went buy and as hardware goes it can stay hiden for long and the problem got biger . so now i have the isues being adressed by way of FED EX and the HP factory . at zero cost to me ofcourse . the thing is that i buy HP pc BECAUSE OF THE QUALITY AND SERVICE . yes i can build my own pc for less cost . i have done it befor . but the extra cost for a HP qulity seviced pc is a diference of about $300.00 . insted of building my own with all the same parts i got now i could have built the same thing . but it would not be the same at all . no 24 hour on line service . no free shipping and repairs . no consant kowlage of the latest driver and products . at to top it of i also bought anougher 3 year exstended warenty service for $150.00 . so i got 4 years of service coming to me still that will garenteed me a great pc that sill works like a top of the line product should . garenteed . yeah we you got to understand a bit about building your own pc . it would have given me 10 companys to call for hahaha service , thats a joke . the 10 companys i wpould have had to buy a part from each one and not one company is going to garentee anything of anoughter product . so with HP it one call to one company that garentees you a service under understandable rules . so i just got maybe $75.00 of my warenty paid for just in free FED EX shiping both ways . so if you add it up and i have bough crudy pc parts befor and there is no help like HP to save me . so yeah i didnt get the best pc day one but what could we do till we could understand the problem . so i just think my day has come 5that all my money that i cant AFORD IS GOING TO GET ITS VALUE FROM HP . thats what i payed for and a home build pc is not what it adds up to realy be in the catolog . so i ant going quit till i see my HP pc back in 2 weeks and its going to work great or why would they fix it . it was just a isues we had wether it was software (windows) or hard ware . they could not fix a hard ware problem so i was screewed if i didnt quit thinking HP and me had toi get a solution and it can at last . i dont know how i new it was hardware . i built many pc befor just with junk parts and it was the same kinda thing is all i can tell ya . blue screen for all my exsperence has always been a hardware isues so i got the facts now my 1 gig video card is now showing the hardware problem so im glad i was right . im like being a dumb fool believeing in trust and honor and they had a righouse point that if windows was doing it they couldnt be held responcable and i would have been stuck . but i got my service and quality i payed for thats all i got to say . so i tell you i do laughf at people with priter problem i must say that my exsperence with printers is to just buy a new one every time it brecks i would not call HP for a printer glich . printers are crap that only last so long so . i buy a new one about once a year but its because they are so cheep that it would cost more in postage then the thing is worth fixing . but i dont kid around about my $1,397.00 HP pc thats not crap at all and it worth every penny . and i know HP ant dummys if they got a error in the pc deartment there going to fix it or they are going to sell anything to make there launch money . thats what i think any way . so my faith is in the repair department for now and my pc never did couse much if a big problem . i been useing it everyday . it would just shut down on me every so often . but it did bug me to spend that much money i dont have for a glich in a pc i love . so i just say . boy i hope they fix it good and not just the video card error but the root of the whole problem . so it will all go away . i hope i do . thank you HP and thank to all that suport a fine quality product and service that HP provides . im gonna go play my facebook game now . bye bye .
There are quite a lot of possible things that are going on. Can you let us know
1. What system you have (e.g. Windows 7, Mac OS Mavericks)?
2. What version of Acrobat or Adobe Reader you have?
3. WHO gets the message about a password (you or the receiver, or both)?
4. What is the full text of the message, if you get it?
5. If the receiver gets it, what security do you set on the file? -
How to determine the sender business system for ABAP client proxy
Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
LeoHi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep -
Send the report output in Email in the case of HR ABAP
Hi
how can i send the output of report in email when i am doin the HR ABAP report .
This report will be sheduled to run automatically every day.
If any body can help please send the answer.
Thanks.hi,
u have to use excel sheet attachment with mail.
u can put internal table data into excel sheet...
sample code...for attachment u have to use objbin..
clear objbin.
refresh objbin.
t<b>his is heading purpose</b>
CONCATENATE 'Name' 'PS No.' 'Grade' 'Location' 'OD' 'DOB'
INTO objbin SEPARATED BY con_tab.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
loop at it_email into wa_email.<<<<----intenal table
this is actual data from internal table
CONCATENATE
wa_email-emp_ename
wa_email-emp_pernr
wa_email-persk
loc
wa_email-od
wa_email-dob
INTO objbin SEPARATED BY con_tab.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
CLEAR objbin.
reclist-receiver = email.
reclist-rec_type = 'U'.
reclist-receiver = 'TC12'.
reclist-rec_type = 'B'.
APPEND reclist.
CLEAR objpack.
att_type = 'XLS'.<<<<<--attachment type
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 1.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Report.xls'.
APPEND objpack.
*Function module to send email with an attachment
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE s899(m3) WITH 'Mail sent successfully!'.
ENDIF.
i hope it will be useful,
regards
vivek -
I am trying to set up Icloud keychain, but it keeps sending the verification code to my land line (which I guess I entered back when I first got my MacBook). I have gone into my apple account and changed the # to my mobile phone, but it continued to send it to the land line. Probably is something simple, but I am not a techy!!
Hi,
As regardss to the iChat and iChat Sharing categorisation you have used.
In iChat 6 (lion) and Messages (Mountain Lion) the apps login to AIM and to Me.com
The Login to Me.com allows AIM to verify the password to the iCloud issued names (@me.com and @iCloud.com)
This "Dual" login also prevents the newer iCloud issued name from using this site
(it has extra Privacy settings that iChat can't access for your AIM and Aim valid Accounts)
Ignoring the @mac.com and MobileMe entries in the Add Account Screen in iChat and using the AIM one does not get around this issue.
AIM and @mac.com names still work in older versions of iChat.
The short answer is that iCloud issued Apple IDs do not work in iChat 5 or Earlier.
10:12 PM Friday; February 15, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I want to abap-hr programing and concept plz send usefull links and materia
hi plz ,
i want to learn abap-hr programing and concepts and faqs, so, plz send usefull links or material or pdfs which helps me and i hope ,
thank u,Hi Manoj,
Welcome to SDN....
Check these link on ABAP HR.
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.planetsap.com/HR_ABAP_payroll.htm
http://abap4.tripod.com/Human_Resources_Tables_Infotypes.html
http://abap4.tripod.com/SAP_Functions.html
http://www.planetsap.com/hr_abap_main_page.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
http://www.sap-basis-abap.com/saphr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d5275f575e11d189270000e8322f96/content.htm
http://www.saptips.com/Previews/SAPtipsAugust-September2004TableOfContents.pdf
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Transactions
http://help.sap.com/saphelp_46c/helpdata/en/4f/d528be575e11d189270000e8322f96/frameset.htm.
http://www.sap-basis-abap.com/saphr.htm.
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/workflow/scenarios.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.sapgenie.com/mysap/mysap_hr.htm
Thanks,
Vinay -
I have forgotten the answers of security questions and the line of "forgot your answers? send reset security info email to ......."
how can i reset them?Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If you don’t know your security questions, phone Apple (using the number listed here: http://support.apple.com/kb/HE57 ) and ask for the Account Security Team. -
Can we hide the lines between the columns and rows of an alv in wd abap
HI all ,
I know that we can colour cell/column/row in an alv in wd abap.
but, can we hide the lines between the columns and rows of an alv in wd abap.
i have checked this link [hiding lines b/n rows and columns of an alv|http://help.sap.com/saphelp_nw04/helpdata/en/91/e7eb40c4f8712ae10000000a155106/content.htm]
but didn't understand, can please anybody provide some example or any material..? it will be very helpful.
THANK YOU.
Edited by: arfat111 on Feb 15, 2010 7:05 AMCode some like this in the WDDOINIT method of your view which defines the ALV component as used component.
instansiate the ALV component
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_usage_alv().
if lo_cmp_usage->has_active_component() is initial.
lo_cmp_usage->create_component().
endif.
data lo_interfacecontroller type ref to iwci_salv_wd_table.
lo_interfacecontroller = wd_this->wd_cpifc_usage_alv().
data lo_value type ref to cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model().
hide the grid lines
lo_value->if_salv_wd_table_settings~SET_GRID_MODE( value = '01' ).
Thanks,
Abhishek
Maybe you are looking for
-
F-30 Post with clearing screen 734, need document number with line item
We are trying to use the 'line item' selection for F-30 transfer postings, for when we are only clearing certain line items for a document number. I have seen this done at other clients, but when we go to the line item in additional selections, it gi
-
HT2905 How do i find duplicate items in iTunes 11?
Where did the remove duplicate from iTunes 10 go?
-
Public Secure Packet Forwarding does not appear to be working on APs
I have enabled PSPF on my Cisco APs and protected ports on the switch ports. Yet wireless clients can still see each other on the wireless net. Am I missing a step? Shouldn't host A (172.20.200.5) not be able to browse/ping host B (172.20.200.6)? Exa
-
What is set_layout_of_doublegrid method
Hi, What is the use of method set_layout_of_doublegrid method of class cl_gui_alv_grid? I need to display header in multiple grids..can I use this method for that? rgds
-
Bluetooth Headset Not Working in Bootcamp/Windows XP
I have a Plantronics Bluetooth headset that works fine in OSX, and is paired successfully in Windows XP. For some reason though, Skype doesn't recognize it, and it is not visible in the sound control panel. The latest Macintosh Drivers disk seems to