Hi, problem while doing Release Strategy.

Hi,
I am having a problem while Creating Release Groups.
" Please Check Release Classes (See Long Texts)"
This is appearing on the Screen while I am trying to Save the Release Group.
Please anyone give me solution for this.............
Thanks & Regards,
Swathi

Hi,
I think this happens because you are defining different release group using different class but using same class type for those classes.
E.g.:
====
Rel. Grp     Class
98              Z_Class1
99              Z_Class2
Z_Class1 has the same class type as Z_Class2.
Hopefully this helps.

Similar Messages

Problem while doing bdc for fv60

Hi frends,
I got problem while doing BDC for fv60 tcode.i have given
header items:
vendor number
invoice date
posting date
amount
item data:
g/l acc no: 100000
amount 1000 whatever
these are all given in recording
in recording after all giving this data if we click on park it is telling "parking not possibe duiring batch input".
can any body tell me the process for recording shdb and after that in bdc how can we give multiple line items for fv60
thanks,
naveen.

I don't think you can use FV60 in batch input. Your options are to use transaction FBV1 or bapi BAPI_INCOMINGINVOICE_PARK.
Rob

Facing problem while doing MIRO

Hi gurus,
I facing problem while doing MIRO, system showing the message "Customization for "company code" J_1iindcus missing in the table"
pls help

Hi,
Please do customization for India Localisation-Phase-II.
In transaction J1IT, maintain company code settings.
J1IT->Global Settings->Company Settings
Reward if useful.

Problem while doing vl10d ....

Hi experts ,
I'm facing a peculiar problem . While doing VL10D / vl10g , the outbound delivery document no. is not generated - and it's showing like this ... I don't know why it behaves as such ?? ....
During creation of purchase order it behaves properly , shows the shipping tab - properly filled the shipping data and others inputs .
Please help me to get the problem is resolved ...
regards
arghya .

Hi Arghya,
Couple of thing which you need to check
1. Can You post the screenshot of the STO number in VETVG table
2. Check the delivery date on the STO.
3.Also in the item level check the chipping table route is populated.
4. Also check the STO has been released
Arun Prasad

STO Problem while doing GR against outbound delivery

Hi Gurus,
Need your help regarding STO,in my case i created
1. STO
2. Delivery in VL10B t code and did PGI
3. on the basis of Delivery i created billing document
4. Excise invoice in J1IIn
Now while doing GR against outbound delivery system in not doing GR giving some error code 1 as follows
Goods receipt not possible for delivery 4900000212: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
My delivery types shipping points everthing is in place but am not able to trace out whats the problem. Please help its urgent
Regards
Vivek

Hi
Based on the error code 1 , it says that the delivery does not exists in the system, That means you cannot perform a Goods receipt againsst the document specified
I have also not done Goods receipt with reference to Outbound delivery. So i am not able to confirm that this can be done or not.... i will definitely get back to you on this.
Thanks & Regards
Kishore

Problem while doing PGI for Returns Delivery

Hi,
We are facing some problem which doing PGI for a returns delivery. Our scenario is HU and WM managed. After creation of delivery I have created a TO and has two different valuation type of same material. Total quantity in TO is 2, 1 of each valuation type. So, automatically, batch split happened for the line item in delivery.
Now when I am trying to do PGI for this delivery, I get en error message saying "Enter Valuation Type". The movement type used here is 161 (Vendor Returns)
Same thing is happening successfully for movement type 643 (Transfer inter company code). What I can gather is that while creating 161 document against delivery system is not automatically taking the valuation types mentioned in line item of delivery.
Let me know possible reasons for this error and resolution.
Regards,
Vishal

Implement the OSS note 965985

Problem with my release strategy (PR), Please help

Folks,
I have designed a release strategy with three characteristics:
This is what I entered in characteristic
1.PRQuantity with table name MEREQ3211GRID and Field :MENGE
2.PRmaterial # with table name RMMG1 and Field :MATNR
3.PRPlant with table name RMMG1 and Field :werks
the value for PRQuantity is >= 10000,000.
Also, I have set the indicator for (allow interval) in characteristics
Classes, procedure with classification, Release startegies are all proper.
I am getting the Release startegy tab in PR, but the problem is when I adopt a PR to create a PO with PO quantity >=10000, the release starategy gets picked up, which is perfect but it is also getting picked up with PO Quantity <=10000.
I dont understand why is it getting picked up for <=10000..Please suggest!!
Thanks in advance!!
Megha

Megha,
In your original post you said,
"1.PRQuantity with table name MEREQ3211GRID and Field :MENGE
2.PRmaterial # with table name RMMG1 and Field :MATNR
3.PRPlant with table name RMMG1 and Field :werks"
Per documentation I have seen, the table you should use for your characteristics for PRs should be CEBAN and CEKKO for POs. Here are some links to SAP notes you may find useful.
[365604 - Release strategies in purchasing|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=365604]
[493900 - Release Strategy|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=493900]
[672719 - Release strategies in the service|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=672719]
Note 365604 may be by far the most descriptive of how to set up the entire process. Hope this helps if you are still having problems.
Regards,
Paul

Problem in PO release strategy in me29n

In DEV client 101, I have copied the standard workflow WS20000075 and create a new zwf for PO release strategy .Activate it and also activate the task in PFTC tcode.Then I have deleted the zwf and its task from Dev client 101.
Now the issue is when i triggered ME29N transaction to unreleased / release a PO. the cancel release icon or release icon is not appearing in release options column in Dev client 201 (101 & 201 are cross client) but it appears in client 101(no problem in 101).
I found changes in wf doesn't relate to displaying the release/ cancel release icon. what might be the issue ?
Kindly suggests.Thanks in advance.
Regards,
Suman
Edited by: samy.smdr on May 19, 2010 11:30 AM

Hi
In relese procedure u can t transport class and characteristics . u ned to create directly in DEV101,201 and PRO 100 also
check all the feald like PLANT , class and characteristics , price . change the price. hope it will be trigger.
Regards,
Anthyodaya.

Release Procudure - Problem while creating Release Group:Reg-

in release procedure char. were created and class also created and the char. were assigned to the class too.
But when i am creating release group the below error was coming..
Please check release classes (see long text)
and if i am see long text the below is the error
Please check release classes (see long text)
Message no. ME492
Diagnosis
Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used.
Procedure
Assign the release groups that were created for overall release to one release class only. Assign the release groups that were not created for overall release to a different release class.
Example:
Rel. group Rel. obj. Overall rel.    Class       Description
01 1 _   FRG_EBAN      Group 01
02 1 _   FRG_EBAN      Group 02
S1 1 X   FRG_GF_EBAN Group S1
S2 1 X   FRG_GF_EBAN Group S2
please see what can i do to solve the issue.
Thanks and Regards,
Rajesh.

HI,
It is not possible to have more than one class define in the release
strategy but it is possible to define difference characterics within
the same class.
Please verify the following:
1) As the long text of the message says, first check that one release
class only is used within the release groups for overall release and
   the release groups without overall release in each case. However, in
   this instance several release classes have been used.
   This means you have to have one release class only for all the
   release groups for overall release.
   Assign the release groups that were not created for overall release
   to a different release class.
Example:
Rel. group,   Rel. obj.,   Overall rel., Class ,     Description
01,,1,,_,    FRG_EBAN,      Group 01
02,,1,,_,    FRG_EBAN,      Group 02
S1,,1,,X,    FRG_GF_EBAN,   Group S1
S2,,1,,X,    FRG_GF_EBAN,   Group S2
2) If you have followed all the indications of the long text of the
   message and the error is still displayed, please try to create the
   new release group via the 'New Entries' button.
3) If you tried to create the release group via this button and the
   error is still been displayed, please verify the implementation of
   note 125316 in you system.
Best Regards,
Arminda Jack

Problem while doing the Cheque print through f-58

Dear Team,
I am encountering an issue while doing the Transaction through F-58 System is generating the cheeque print with coma instead of decimals i.e instead of 1,00,000.00 its comming as 1.000.000,00.
Please advice how to correct this.
Thanks for the consideration.
Regards,
Suma Nalluri.

Dear Nambi,
I have checked the settings there evry thing is fine.Still i am facing the same issue. I do not understand may be due to any bug .Please advice.
Regards,
Suma.

Problem while doing PGI

I tried searching for this error below but i could not find any relevant thread.
I get the following error while doing PGI:
Fld selectn for mvmt type 601 / acct 7001012003 differs for Sales order (013)

but i could not find any relevant thread
Surprising!!!!!!
Not sure with what text you had searched. Either the error message should be typed in full without any abbreviation or with error message number. More than 15 threads you can find in Google.
G. Lakshmipathi

Problem while doing MFBF

Hi Gurus,
While doing MFBF transaction i was not able to see the 131 movement in MB03 T.code.
I was able to see the 261 movements fine as well.
Help to solve this..
Thanks.

Hi,
Please check the control key maintained in the routing of the material.
Auto GR should be activated in the control key (PP03)
Then you need not go for seperate GR for the material.
Come back if any issues.
Ghanshyam

Problems while doing following Tutorial

Hello all,
I have problems while completing following tutorial:
http://www.oracle.com/technology/obe/obe9051jdev/ToplinktoDatabinding/toplinktodatabinding.htm
Everything is fine until I reach the step to create the databinding.
After I drag and dropped the table to the databinding field, I get following warning:
Warning, no session.xml
A session.xml, that can be created from New Gallery, was not detected fpr the TopLink project associated with the selected class. In order tu use the TopLink Client/Server erchitecture, you must define a session.xml containing a Server Session for the associated TopLink project. If uou continue without creating a session.xml, this data control will not have the benefit of a Server Session shared across the given application (recommended TopLink architecture for ...
Is it necessary to have such a session.xml?
And after I finished the tutorial, I don't get any data, in every case, wether with or without a session.xml.
It would be nice, if anyone could give me a answer. Thanks a lot.

Problem solved:
created a session.xml and everything worked fine.

Problems while doing a rollback on MQSeries using a java client

Hi,
I'm new to using MQSeries with Java client. I have a kind of similar problem. I have a set of messages in a Queue. When i'm doing a rollback on certain message it's returing to the same pointer where it had come from in the queue. When i'm iterating through the messages in the queue using a for loop, the same message is again retireved. So, i tried to set the setMQGMO_MARK_SKIP_BACKOUT flag to true. But i'm getting an RequestException with error code 2046: MQRC_OPTIONS_ERROR
Any help on this would be highlly appreciated.
I'm pasting the code snippet below.
Class X {
public void receive(
com.stc.connector.webspheremqadapter.message.IMessage input, com.stc.connector.webspheremqadapter.message.IMqOtd
MQSeries_1){
int msginqueue = MQSeries_1.getCurrentDepth();
String corrID = "";
byte[] corrIDInputArray = input.getMsgHeader().getCorrelationId();
String corrInputID = (new String( corrIDInputArray )).trim();
for (int i = 0; i < msginqueue; i = i + 1) {
MQSeries_1.getQueue().getGMO().setMQGMO_SYNCPOINT( true );
MQSeries_1.getQueue().getWithOptions();
byte[] corrIDArray = MQSeries_1.getMessage().getMsgHeader().getCorrelationId();
corrID = (new String( corrIDArray )).trim();
if (corrID.equalsIgnoreCase( corrInputID )) {
MQSeries_1.commit();
} else {
MQSeries_1.getQueue().getGMO().setMQGMO_MARK_SKIP_BACKOUT( true );
MQSeries_1.backout();
}

I agree that you should check for a specific axis / tomcat forum (maybe on apache website??;)) anyway ... check the path and classpath you use while building the wsdd file and when running the adminclient, and check the syntax of its invokation

Query Problem while doing Transportation

Hi,
Last Month in the <b>release I</b> i created 17 Reports and there are assigned to RRI also.
After that i Transported both the reports and RRI to QA. It is success .
Later on there are some modifications in the reports and i modified them and i again Transported both the reports and RRi and it was success.
This month in the <b>release II</b> i again modified the same 17 reports and i transported the reports to QA. The problem is 13 reports had changed in the QA but the remaining 4 reports are shown as 8 reports(4 x 2) with same technical names . I did not transport the RRI this time.
So i found a single report as 2 reports with same technical name. this means that it has not overwritten.
How should i solve this problem.
Can any one give the solution for this.......
Thanks & Regards
Jagannadha Raju

Hi,
Check which elements of the query has not been transported, Check the queries in QA and you will find what is missing and also check that the missing Elements of the query are not saved in $TMP folder. Find out exactly which of the missing elements are not transported and transport them alone will do the job.
Also notedown the technical names of the missing elements and you can find which item it is by searching in Metadata Repository first search with the Query Technical name and then include technical name of your Query element.
Regards
Ranga
Message was edited by:
Ranga

Hi, problem while doing Release Strategy.

Similar Messages

Maybe you are looking for