Hi Problem with LSMW-IDOC message type COND_A(COND_A02)

hi Experts,
I am using LSMW-IDOC to create the condition record for transcation code(XK15) when i am executing i am generating successfully idoc i can see the updated vales in TK15 tcode, the data base is getting updated the problem is the scale id is increaminting automatically i should increament the scaleid i am passing the scale id that scale id should be displayed in Tk15 but the scale id is increamenting.......
its urgent requirement...

Hi,
Thanks. But still I don't see values.
I have a question in chang pointer.
When I change the values in the table( Segment data ) for IDOCs, an IDOC should be generated
Other words, When I change any application, an IDOC should be generate.
What should I do, I think Change pointer is required for this to geneate idoc for change of application/data.
In BD50 I see the change pointer is active for my custom message type.
May be I'm misunderstanding about change pointer.
can you help me out.
Venkata

Similar Messages

LSMW with IDOC Message type COND_A and Basic type COND_A01

Hi Sap All.
in my project we using the LSMW with IDOC Message type COND_A and Basic type COND_A01 and now the requirement is to know the list of the tables which will be updated when i do the LSMW Migration with this IDOC Basic type.
i have tried to know the list of the tables updated by entering into the transaction we30 and looking at the segments E1KOMG,E1KONH, E1KONP,E1KONM,E1KONW and i found that the following below are the list of tables which gets updated when i populate the data into IDOC Message type COND_A and Basic type COND_A01.
KOMG,KONH,KONP,KONM,KONW.
please correct me if iam wrong.
regards.
Varma

Hi Varma,
The tables mentioned by you definitely get updated, i guess you can add KONV to the list too, but to be a 100% sure, enable SQL trace and process an IDOC. Then you can look for Insert/Modify/Update statements to get a list of the tables that get updated.
Regards,
Chen

Lsmw idoc message type

hello iam transfering legacy data for Open AR lne items what message type we use for this in idocs and how and where we find that particular message type is assigned to particular object.it is urgent can any body help me regarding this .
Regards
Janapathi

Hi Priya,
To find which message type is assigned to which object, Goto Tcode BDBG give object name and method then click display.
Reward if helpful.
Younus.

Idoc Msg Type COND_A in MM condition transfer

Hi,
Idoc message type COND_A is used to transfer condition records from one client to another using ALE.We can use t-code MEK3 to transfer PB00 condition type .
Can anyone tell me which t-code is used to transfer condition types other than PB00 like FRA1,etc. in MM using message type COND_A?
Thanks,
Kaveri

Hi,
Pricing condition related table is A000 and to sending this data throug ALE process transaction is VK13. Go to transaction VK13 and click on "Condition information" then it will ask you for inputs. Then click on "Execute"...You would get the COND_A IDocs.
Thanks,
Asit Purbey.

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Contract creation in Backend with Idoc message type BLAORD

Hello,
We are creating Backend contracts from the Bidding engine functionality. We only want to create backend contracts and did the necesary configuration.
We activated BADI: BBP_DETERMINE_LOGSYS
Method CONTRACT_LOGSYS_DETERMINE.
We did not yet implement BADI:
BBP_CTR_BE_CREATE in SRM 5.0
In SAP R/3 Backend system (Version 46C) we see SAP is trying to create a contract via Idoc message Type: BLAORD.
In the trx BD87 in the backend we get status 51 :
Mesage number: 00 055
"Make an entry in all required fields"
In the segments of the Idoc however we do not see which field is missing!
How can we best analise this problem. Or maybe anyone can give us a a hint what is missing.
Thanks for any reply.
Aart

Hello RRK,
In ref. to your mentioning to change the backend configuration from WKK to MKK might not be as easy to do for organizations. As those configurations effect the overall creation of purchasing document types in R/3.
The Key issue is why the "Target Value" in the Header of the SRM GOA does not get transferred to the R/3 contract. That's why the issue is still there.
Were you guys able to figure out why that was missing? In the BLAORD IDoc the Target Value seems to not get transferred from SRM - its 0.00 if the IDoc is reviewed in WE19. This seems to be the problem.
Just wanted to know if you see the same issue in ur system.
Thanks.
Sunny.

How link customize IDOC message type with FM ?

Hi,
I have created new IDOC message type ZCOST and FM ZMASTERIDOC_CREATE_COST. (Outbound).
Please advise how link the message type and FM ? so everytime i am executing BD21 with message type ZCOST the program always calling FM ZMASTERIDOC_CREATE_COST to generate the IDOC.
Thank You and Best Regards
Fernand

HI,
You need to link Mssage type, IDOC type and the FM (also extension idoc type if exits) in TCODE: WE57 --> go to change mode
--> then new entries --> even you need to gove the direction inbound/outbound.
Also you need to create a outbound custom process code in WE41. and link the FM to the process code.
This process code shold be assigned to the partner profile in we20 in outbound parameters -> so you FM will be picked up qutomatically.
regards,
Nazeer
Edited by: N a z e e r on Jul 14, 2010 3:14 PM

CRM: IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M

Hi,
I'm currently working on a CRM data migration project. I'm using the IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M to map data into contact relationship structures.
The problem I am having is the above interface works with SAP standard BUR001 type contact relationships. But a copy was taken of BUR001(is contact person for) => ZUR001 (former contact person of). This allows you to add a date range: DATE_TO - DATE_FROM. Using the above interface I am able to map these dates to the ZUR001 type relationships.
All the other data I try and map i.e Function, Telephone No, Fax No ect.. will not map. I'm at a loss as to why not?
note: running CRM 4.0
Any help with this would be greatly appreciated.
Regards,
Philip Johannesen

Thanks Saquib, the OSS note was very informative.
Do you know where I can find " In addition, you can find DXWB/LSMW examples under service.sap.com/CRM-Integration which you can install in a CRM system and use as models."?
I've looked under the new link "service.sap.com/crm-netweaver". But have been unable to find any examples.
I've awarded points as promised.
Regards,
Philip Johannesen

IDOC message type or bapi to create CRM Product hierarchy

hi all,
I tried to tranfer the Product hierarchy to CRM using LSMW, it could not transftered by batch input and I could not find any IDOC message type or bapi to create Product hierarchy. it seemed that I could not using LSMW?
i also found that many BAPIs in CRM were not related with ALE message.so we can not use LSMW using IDOC or BAPI to transfer data? i will very appreciate anyone who can tell me to solve such problem, especially tranfer data to CRM. thanks so much!

hi Ramgopal,
u can check the bapi-BUS1112 for cost center, and from the methods what ever u want u can take based upon requirement
if u find it useful plz mark the points.
check the IDOC method with message type COSMAS and basic type COSMAS1
it should workout now
Regards,
Naveen
Message was edited by: NAVEENKUMAR GUDURI

IDOC Message Type FIDCCP02 - Error RW029

Hi All,
We are trying to post a FB01 using a IDOC message type - FIDCC2 and struck at error message -
Accounting transaction not permitted for posting in FI/CO
Message no. RW029
When i try to post directly using the exact data in the IDOC, through FB01, there is no problem.
Debug showed that the error is in the following -
Include LRWCLF01
check business process
SELECT SINGLE * FROM t022 INTO ld_t022
WHERE activity = t_acchd-glvor.
IF sy-subrc IS INITIAL.
IF LD_T022-VORGTYP = 0 OR <---------
IF ld_t022-satztyp <> 0.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
ELSE.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
If this is not the right message type to use, can you suggest any other message type? FB01 we are trying to post is a simple GL posting, no tax, no withholding, etc. IDOC is just a 2 line posting.
Any help/advice is highly appreciated.
Many Thanks,
Shashi

Hi Shashi ,
This table is for Business Process t022 based on activity .
Check your customise settings .
There is no problem with message type .
Please reward if useful

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

How can I put a filter to message type COND_A

I am creating message types: COND_A from Change Pointer.
I have an active filter on element: Condition type. (BD64). This is working OK.
I also want to set the filter on element: Material type.
This is not working, probably because this element is not an active field in any delivered IDoc Segments. (Ref. WE05). The result is that no messages (IDoc's) are delivered.
How can I get this filter to work for COND_A?
In other words: How can I select on Material type = 'XXXX' creating message type COND_A from Change Pointer?

No, however, you can have Favorites and Recents show on the App Switcher (Multitasking) screen, assuming you are running iOS 8: Settings App > Mail,Contacts,Calendars > Show in App Switcher [under CONTACTS]

IDOC message type for "Site" in SAP Retail module?

Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
Matt

Hi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas

Error in Custom generated IDOC message type for XIF

Hi all,
I had generated a custom message type under interface function module crmxif_partner_save for enhanced fields. While generating from BDFG it popups inconsistency sap notes which is already in crm 2007. so i just ignaore them. idocs are generated sucessfully with this custom message type. but i should release this message type here it throws error
1. (red) The interface is not current. It must be regenerated
2. (yellow)
Segment E101CRMT_BUS_EI_SET40_DATA <-> CRMT_BUS_EI_SET40_DATA
3. Segment E101CRMT_BUS_EI_SET140_DATA <-> CRMT_BUS_EI_SET140_DAT
4. Segment E101CRMT_BUS_EI_SET30_DATA <-> CRMT_BUS_EI_SET30_DATA
5. Segment E101BUS_EI_BANKDETAIL <-> BUS_EI_BANKDETAIL
Unable to release this message type. Please reply with answers would be appritiatable

Hi,
I am not very sure of whether you have got answer to this issue.
If not kindly implement the note 975684 to solve this issue.
Regards,
Venkat

Idoc/message type related to su01 tcode fields?

hi experts,
when i create a user in su01,an idoc should get triggered.
are there any standard idoc / message type having fields related to this.
thanks,
charu
Edited by: charudevrani on Jan 11, 2012 7:38 AM

Hi Charu,
You can use one of following IDoc types, depending on the action you want to perform on the user master record:
USERCHANGE     Change user
USERCLONE     Create User with Template in Another System
USERCREATE     BAPI to Create a User
Regards,
Marcin

Hi Problem with LSMW-IDOC message type COND_A(COND_A02)

Similar Messages

Maybe you are looking for