Hi problem with my dvd drive and updaate pavilion dv6 notebook pc

1: dvd drive is not red only red cd.
2: ATI Technologies Inc.-Display-ATI Mobility Radeon HD 5650 & Helwett-Packard Development Company,L.P.-Other hardware-HP.... & Synaptics - Input - Synaptics PS/2 Port Touchpad ) Ask updates with Windows but not install error code = 80070103
3: (8 out-of-date my drivers found)
1: Intel(R) 5 Series 4 Port SATA AHCI controller
2: IDT High Definition Audio CODEC
3: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root por... Installed 2006-06-21
4: Intel(R) 5 Series/3400 Series Chipset Family PCI Express Root por... Installed 2006-06-21
5: Intel(R) 5 Series/3400 Serise Chipset Family SMBus Controller-3830
6: Intel(R) 82801 PCI Bridge - 2448
7: Intel(R) HM55 Express Chipset LPC Interface Controller-3B09
8: Intel(R) Turbo Boost Technology Driver
Please help me my mail = [email protected] Thank you

HI,
did your friend installed the XP from a MS Cd or from the Toshiba recovery CD?
At my Toshiba notebook the autoplay section is also setted to Music file and works properly!
When did this failure occured for the first time? Did you used the MS System recovery option at Start - Accessories - system prog. - System recovery
Perhaps the backsetting of your system solve the problem!
You can also check if a firmware update is available for your drive! (If it is a Toshiba drive go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home
Bye Hans

Similar Messages

Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan

Having a problem with the DVD drive not being recognized by the computer

Compaq Presario CQ60-215DX NOTEBOOK PC, WINDOWS VISTA, Error 10 when trying to reinstall the driver, says cannot start.
I went thru the HP troubleshooting and it said to see the mfg of drive to solve problem! I finally bought a new DVD drive P/N498479-001 for replacement . uninstalled the old drive & then reinstalled the new drive , restarted the computer & it still will not recognize the DVD player! Same error code, same problem. The problem started when I tried to play a CD that appeared to be scratched pretty badly, however my desk top played the CD with out problems? When you click on "computer" the drive does not show up!
I did install a new router a couple of days before this happened, but I am using a data cable to it, so that should not be a problem. Any Ideas?

Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ

Problem with IDE DVD drive

Hey guys. I just built a desktop and I've been having some problems recognizing my hardware. I've got a SATA hard drive and it works fine, but my IDE dvd burner isn't recognized. It doesn't show up under /dev/ and lspci -v returns
03:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6121 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device 6121
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=8]
I/O ports at c480 [size=4]
I/O ports at c400 [size=16]
Memory at fe9ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
I'm running an Intel Core 2 Duo e6850 on an MSI p35 platinum motherboard with 64 bit Arch installed. The drive gave me some problems when I installed arch; I could boot the CD, but once I tried to install any packages it told me that no CD drive was found, so I had to install from FTP. I'd really like to have 64bit Arch on this computer, so I'd really appreciate any help. Thanks.
-Kenny

I have the LiteOn DVD burner, and encounter the same problem as you. Tried everything suggested by others, nothing worked. Finally got it to install when I changed the memory settings from 667 to 400.

Satellite L505-S5990 Problems with CD/DVD drive.

I have a new Satellite L505-S5990 using Windows 7. I have tried to burn a backup disc using my laptop but I keep receiving an error saying that the burner is busy or that I should update the driver. I have already updated the DVD/CD driver to it's latest version. Does anyone know what I can do to fix this problem?

Go into device manager, uninstall the DVD drive, then reboot the system to have WIndows automatically re-install it. This often times take care of the problem.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Terrible problems with CD/DVD drive on Power Mac G4

Hey guys,
I am pretty much unable to use the CD/DVD reader and burner in my Mac.
My Mac is a G4 dual-processor 1.42GHz with 2 GB of RAM running Mac OS X 10.4.11.
Here are the problems:
After a while of reading or writing a CD or DVD, the drive seems to freeze. The disc cannot be ejected.
Any application which attempts to read or write to the disc thereafter will become a zombie (orphaned) process. Force-quitting the application or kill-9'ing it does nothing.
This strange "infection" will eventually spread to all open applications, which will colour-wheel. Even ejecting the CD with the button on the drive (which doesn't always work) doesn't help.
If you manage to restart before this takes complete hold, nothing happens. If you do "sudo shutdown-r now", the screen goes blue and the little grey spinner appears. When you are forced to pull the power, restarting takes 20 minutes as the computer checks all drives.
This happened with my standard-issue SuperDrive, so I bought a new drive to replace it, thinking it was faulty, but exactly the same thing happened.
This has gone on so long, and it drives me insane. If anyone has ever experienced any similar problems, please let me know, as I've never found any info on the web about it. Please help if you know how to fix this!
Thank you in advance,
John

If you don't have a spare battery but do have a digital multimeter you can do a quick voltage check on the installed battery. If it is the 3.6V half-cell variety it should read at least 3.2V.

Problem with cd/dvd drive on my Satellite 1900-303

Hi Every body
I bought a Satellite 1900-303 in 2003. Recently, it's cd/Dvd drive stopped to work properly. whenever I put a Cd in the driver it assumes that the CD is a audio cd. if the CD is completly Audio cd or partly contained audio files it opens the cd without any problem. but if cd is data CD or software CD after trying along time my system hangs up. I change the settings of the properites of Cd drive in Autoplay section from Music file to other options such as "mixed content". but after inserting CD into the drivers it agains changes automaticaly to the "music file". I showed my notebook an expert in computer system and facility, he tried to reinstall windows XP to solve the problem but it didn't work. Since the driver was not working he used external driver to install windows XP. but the problem has not been solved.
Is there anybody who knows by accident what I should do to recover it?
Awaiting helpful advices.
Vahed

HI,
did your friend installed the XP from a MS Cd or from the Toshiba recovery CD?
At my Toshiba notebook the autoplay section is also setted to Music file and works properly!
When did this failure occured for the first time? Did you used the MS System recovery option at Start - Accessories - system prog. - System recovery
Perhaps the backsetting of your system solve the problem!
You can also check if a firmware update is available for your drive! (If it is a Toshiba drive go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home
Bye Hans

Problem with FireWire Hard Drive and JVC MiniDV Video Cam

I've been running my iMac with a 1 TB WD MyBook Firewire drive and it has been working fine.
I just purchased a JVC GR D850 miniDV camera. I hooked the camera up to the second FireWire port on my iMac and, initially, the import of the video from the camera into iMovie was ok (video being saved to the external firewire drive). After a couple of minutes, I got a warning that a device had been disconnected improperly, apparently the firewire drive just disconnected itself from the machine. I rebooted everything and once again, as soon as I turned on the video camera the drive disconnected.
After that, the iMac won't even recognize that the video camera is connected, and when I checked the little bit of video that had been saved on the drive it was unusable. Completely choppy.
Am I dealing with a problem of too little power/memory on this G5 iMac?

You don't specify which model iMac you have, but 2 GB should be enough to handle a video download. Can you try connecting the camera to another computer to see if it is faulty?
Also, have you tried connecting the camera to the port that you have the MyBook in?
Try resetting the SMU and see if that helps. Please post back with results,

Problems with SATA DVD drives

I recently purchased this MacPro. I have since added 2 SATA DVD drives to the system that originally had 2 PATA drives. The problem that I am having is that initially I can eject the disk from both drives but after 5 minutes both drives stop responding and neither will eject. Has anyone else had similar problems. I would appreciate any ideas.

Yes I did. When I unchecked it I was able to eject them. Thank you very much. I knew it was something simple that I was missing.

Problems with cd/dvd drive in L305D

I have the L305D-S5900 Satellite. So far this problem has happened twice, and I'm getting tired of it. I got the computer about 1 month ago. When I got it, I started taking off the bloatware and such that came installed on it(all the trial programs). And loading my own programs. After a while, I tried to test out the gaming abilities and played some full screen game. So far, everything worked. I shut the comp down and the next day, turned it on only to discover the cd/dvd drive stopped working. I went through device manager to see what the problem was, and listed next to the drive is this:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
I hadn't uninstalled anything relating to the drive, and it was working before I turned it off the night before. Even stranger is that when I did a search for an updated driver for the cd drive, it tells me that the driver installed is the most recent and I don't need one!
When I open My Computer, it lists the hard drive, and doesn't even show the cd/dvd drive installed. Also, I use daemon tools as well to provide virtual drives if I need them, and if I add a virtual drive to the computer, it doesn't show that either. If I put a cd or dvd into the drive, it doesnt autorun and I can't access the disk. however, I can boot from the drive if I use the toshiba recovery cd.
long story short, I had this problem the first week I got the computer, and I couldnt figure out the problem, so I did a fresh install and wiped everything out to start again. Well, yesterday the same exact problem occured and I can't figure out how to solve it.
I know I wrote a lot, but I wanted to describe the problem in-depth. Any solutions not including a fresh install would be appreciated.
thank you very much.
-Andrew

Here's one of the possible solutions for that. Type regedit on the Start Search box then click regedit on the Programs List. It will open the Registry Editor window. Look for HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318} then delete the UpperFilters and LowerFilters in the right pane. After that, restart your computer. Check if the ODD will show up on the My Computer window.
"No one can predict to what heights you can soar until you spread your wings."

I have a problem with my software/drive and so Apple needs to wipe it and return it to factory settings; is Google Drive a safe and feasible way of backing up my computer prior to the wipe?

I stupidly downloaded MacKeeper and my computer has since been going bezerk. I went to the Apply store yesterday and they ran some tests on the computer and it came up with a Software warning so they've booked me in for early next week to wipe the drive. I've deleted all related files to MacKeeper, but in Activity Log it's still running (I tried quitting but can't because it's running under the user "root"). I'm wary of programs now but have downloaded MyDrive (Google Drive) and am attempting to back it up. Is this okay?

You probably don't need to do that.
How to Remove MacKeeper or use the Uninstall option in MacKeeper.
To erase and reinstall:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Satellite Pro L500-12E - Issue with CD/DVD drive and display

Hello...
I have some questions about my laptop..
1. Is it normal that on some DVD/CD's the DVD rom it very loud and vibrates a lot, spesialy on older CD's..
2.The cover/lid of my laptop when i close it its kinda not in line with the rest of the pc it is not totaly alligned but its kinda hard to see expect when you look for it..but its properly on and its not lose or anything just not alinged to the "body" of the laptop
3.The lid again, Underneath the screen where the lid is mounted to the "body" off the laptop if.. it is not glued to the screen like the rest of the edges its just putted next to it you can drag in it so you can see the wires going into the screen etc
is that normal?
-thanks

1 I can imagine that CDs/DVDs are louder. Maybe are they a little bit out of shape and by spinning you can notice some vibrations. Be sure the discs are placed properly into optical disc drive.
2 It is not easy to discuss about it without some picture but I don't think it is some serious issue.
3 What you see is probably cable for WLAN antenna. WLAN antenna is placed behind the LCD.
I cannot confirm this is normal or not normal because I don't have L500 but if you want to have professional opinion visit nearest Toshiba service and show what do you mean exactly.
For me all this don't sound as some serious issues or hardware problems.

Ata problems with new dvd drive. [SOLVED]

I just bought a new dvd-burner. At the first boot I noticed a lot of messages along the lines of:
ata2 exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
and an extremely long boot time. 3 to 5 minutes. When finally booting in to system the drive seems very sluggish to mount. Should I disable sata and pata in mkinitcpio? Is my new hardware crap?
Its a Samsung Writemaster DVD-burner btw.
Last edited by Ashren (2008-01-29 22:27:44)

Do you have an idea where the problem could lie?
Here's my lspci -v:
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fd000000-feafffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:06.0 System peripheral: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff80 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ff60 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ff40 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ff20 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fcf00000-fcffffff
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Unknown device 0157
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: medium devsel, IRQ 18
I/O ports at eda0 [size=32]
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ee00 [size=256]
I/O ports at edc0 [size=64]
Memory at febffa00 (32-bit, non-prefetchable) [size=512]
Memory at febff900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Unknown device 01b9
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 19
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: <access denied>
02:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
Subsystem: Dell Unknown device 0157
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fcfff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at df40 [size=64]
Capabilities: <access denied>
Perhaps some sort of interrupt (IRQ) issue?
Last edited by Ashren (2008-01-29 20:42:25)

Problem with p70530 stepper drive and T21NRLH-LDN-NS-00 motor

Hi.. I am trying to get a motor working.. I have a NI UMI-7772 motion interface (http://sine.ni.com/nips/cds/view/p/lang/en/nid/12534), controlling two PS P70530-SDN (http://www.danahermotion.com/products/product_detail.php?parent_id=549) drives with each a T21NRLH-LDN-NS-00 stepper motor.. But i can't seem to get it to work.. I've tried almost every possible setting in Measurement and Automation Explorer, and the program seems to think the motor is moving, but nothing happens.. At best the motor is holding the axis, so that you can harddly move it manually.. The drive has a number of preconfigured motors, that should work (http://img526.imageshack.us/my.php?image=drivesbb7.jpg) but the drive I have is'nt on that list.. According to the manual I need a cable (P7S2-232-9D) to configure the drive from a computer.. The problem is, that I'm short on time and don't have that cable.. So is there any of the other motorsettings that could work with this drive, or do any of you have any other suggestions..
Best regards
Mark Herskind

Hello ben64,
You should use the software (via GPIB) to lower the drive’s current output to the motor. You can do this in real-time while the motor is running.
However, if you decrease the power supply to the drive you may not get the point where the motor stalls but rather the point at which the drive fails/browns out/chokes.
I hope this helps you out
David G
Sales Engineer - SE Michigan & N Ohio
National Instruments

Problems with my display driver and CC

When I right click on a photo in Lightroom and select "edit in Photoshop CC", my screen goes black and then restarts with a message that my display driver stopped working and successfully restarted itself. Then, CC opens. But sometimes it doesn't and I get a message that CC has stopped working. If I open CC as a standalone, there doesn't seem to be a problem. Any thoughts on what is going on?

CC is the generic designation for the Cloud, which is a delivery medium
Each program says CC, but for program help you need the individual product forums
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom
http://forums.adobe.com/community/photoshop

Hi problem with my dvd drive and updaate pavilion dv6 notebook pc

Similar Messages

Maybe you are looking for