Hi , PROTECT..........ENDPROTECT is not working

Hi ,
Can we use the protect.....endprotect command across the many elements .
My Line Item is shown in two rows like this .
Material      qty     unit    price description
mat1         1            ea      10     text1
........       ..          ...       ....      text2 .
Problem : Text2 is printing separately in another page .
Those two rows of data is fetched in the Elemnents Item_Qty , Item_price , and item_desctiption of main window  .I  Put all these three elemnts b/w protect and end protect . But still  there is split and text2 is printing in next page .
Could you please help me .
Thanks ,
Dharma .

HI
  If you are using protect and endprotect will the remaining data is printing except the last statement Authorised Signatory. If that is the case please check may be you commented that line in the script, uncomment that line then that will work. If all the data is not printing then the problem is with your window size probably that size would not enough to accommodate all the data so try to increase the size of the window then you will get that.
Hope this will give you some idea.
Regards,
Aswini.

Similar Messages

  • Menu key for the bb protect app is not working

    Hi guys,
    For the blackberry protect app the menu option is not working ,after entering in to the bkackberry protect app in the mobile and iff we press menu key it shows settings ,backup ,update options but now its not showing any details ....else bb protect app is undermaintenance .
    Please help me in fixixng
    Solved!
    Go to Solution.

    Hi ,
    Yes ,I have done the same but the menu option is working once opened the. Bb protect app.

  • ProtectLink Web Protect URL Filtering not working

    Good day!
    Please help.
    We have a problem on our RV042 router.
    The Protectlink WebProtect URL filtering is not working.
    When we first activate the service (Nov. 12), it worked for a few days, then 2 days ago, our internet connection got problems. But yesterday, our ISP fix the problems on our internet connection, but the URL filtering of WebProtect is not working anymore even if it is enable, up to this time.
    What should we do about this problem?
    Thanks in advance for your kind replies!

    i have installed TMG 2010 and created url filtering rule for facebook.com but that problem
    is ever after five minutes i can see that the users can access facebook. and then i check in TMG MMC so i can see that the Category Query says me that facebook.com is unknown....but just after five minutes i can see facebook has been automatically blocked
    and i can also see in Category Query it says me facebook is in blog/wiki category...
    so why it is changing automatically every after 5 or 10 minutes :( ?
    where is the problem ???
    i need your help please !!

  • PROTECT ENDPROTECT doesen't work sapscript

    hello,
    i would like to use protect becuase i want that this element stays in one entire page, but he continue to broke the element.... why?
    i use protect and endprotect...it's correct?
    /E           ITEM_LINE
    /:           PROTECT
    /:           SET DATE MASK = 'DD/MM/YY'
    /*           IF &PAGE(C)& <> 1
    /*           &ULINE(112)&
    /*           ENDIF.
    T2           &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
    =           ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
    =           &T_PRICES-PR_SCONTO(C)&
    /*           PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
    /*           USING &VBDKA-VBELN&
    /*           ENDPERFORM.
    T2           ,,&VBDPA-ARKTX&
    /*           ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
    /*           ,,&'Partita 'VBDPA-CHARG&
    /:           ENDPROTECT

    Try this,
    I think there is a small error in your code.
    /E ITEM_LINE
    /: PROTECT
    /: SET DATE MASK = 'DD/MM/YY'
    /* IF &PAGE(C)& 1
    Instead try this
    /* IF &PAGE(C)& = 1
    /* &ULINE(112)&
    /* ENDIF.
    T2 &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
    = ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
    = &T_PRICES-PR_SCONTO(C)&
    /* PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
    /* USING &VBDKA-VBELN&
    /* ENDPERFORM.
    T2 ,,&VBDPA-ARKTX&
    /* ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
    /* ,,&'Partita 'VBDPA-CHARG&
    /: ENDPROTECT

  • Portal Work Protect mode is not working properly after upgrade to NW 7.4

    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data")
    When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup.
    Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window.
    This was working fine before upgrade to SAP NW 7.4 SP 5.
    Please let me know if anyone have faced this issue before or have an resolution.
    Thank you.

    Hi Sundar & Rakesh
    I've followed Sundar's request in the previous thread we worked on together to provide further assistance here:
    ** Scenario Summary **
    The portal Work protect mode value is set to '3' ("Choose action in popup on unsaved data") When we edit a standard ESS java Web Dynpro application and click exit, the portal should show us the Work protect mode popup. Instead, the portal exits to the overview page and when we try to navigate away from the overview page, it shows the work protect mode window. This was working fine before upgrade to SAP NW 7.4 SP 5.
    Ok the first point of reference and analysis here is to check and review: Workprotect mode via the following navigation path:
    System Admin-> System Configuration -> Service Configuration -> Under one of the services: Work protect mode property.
    Now in terms of this popup kindly ensure the configurations are setup accordingly as per the following document:
    http://scn.sap.com/docs/DOC-2513
    What is the setting of WDPortalWorkProtectMode.setApplicationDirty ?
    Work Protect Mode
    http://help.sap.com/saphelp_nw04s/helpdata/en/45/b76f4169e25858e10000000a1550b0/content.htm
    Lastly have you attempted to change the property value and restarting the service ?
    Restart the config by right clicking on com.sap.portal.epcf.loader. Click Administrate ->restart
    Kindly update me as per your findings.
    Kind Regards
    Troy Cronin - Enterprise Portal Support Engineer.

  • Page protection in smartform not working

    Dear All,
    I have a smartform with one page. For a range of order numbers multiple pages would come in output. Example : 5 order numbers , 5 page output. There is a header part, that has to come on each page which is hard coded i.e company name .
    when we give small range of order number ,output comes perfect. But when range is over ten. the header part  moves for some pages into previous page...........

    Hi Shiva,
    I am using only one page. In it I am using  loop to display all content.
    Pattern of each page is:
                                                                    Company Name
    doc no.      123456                                       code:456                                  city:nnnnnnnnnnnnnnn
    table  with 4 cols.
    footer part. of table
    pm sign                                     authority sign                                                  reviewer sign
    So, when there are more then three pages, the last line in smartform goes in to next pages .Due to which other pages indentation also goes wrong.  This is happening when table size is increasing more then it is in first page.
    Please Help.........

  • Windows Identity Protection Suite is not working with the new version, Firefox 4

    I swipe my finger and the DigitalPersona Personal window opens.

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • PROTECT-ENDPROTECT problem in SAP Script

    In SAP Script MAIN Window I have 10 different elements to print differet stuff related with each delivery line item.
    Like Material Number
    Material Description
    Long text [Has formatted text and I am reading that text and printed in some format some lines under material number and some under materail desc.]
    and other information required by client.
    Loop at Delivery item table.
    CALL FUNCTION 'CONTROL_FORM'
           EXPORTING
                command = 'PROTECT'.
    Print differnt elements.
    Loop at lond text internal table.
    print in proper format as I mentioned.
    endloop.
      CALL FUNCTION 'CONTROL_FORM'
           EXPORTING
                command = 'ENDPROTECT'.
    ENDLOOP.
    My problem is PROTECT ENDPROTECT is not working properly.
    It is printing only 1 item with other info on first page as there are enough space left to print minimum three items with details.
    on next page it is priting only 3-4 items as there are enough sapce to ptint at lease 10 items with details.
    The only good thing is it is not spliting the Item details and other text.[Main window on next page has bigger size]
    Any idea why PROTECT - ENDPOTECT not behaving properly.
    Thanks
    Aman
    Message was edited by: Amandeep  Singh

    Hello,
    Try to do like, Put PROTECT and ENDPROTECT in the SAPScript itself.
    Like
    Element 1
    Protect
    ..matnr....
    element 2
    ...desc....
    element 3 (long text)
    ...text
    ....text
    element 4
    endprotect
    call the element 4 in the loop statment, whenever required.
    Hope it will work.
    Regards,
    Naimesh.

  • My Apple store ID password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn't receive any email from apple

    My  other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple

    You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

  • Scan to email does not work

    Hello.
    I am having some issues with my HP LaserJet pro 200 Colour MFP m276n
    It is very odd, Basically I can scan to email with a @outlook or @gmail address
    But when I use a company email like [email protected] It will not work. It works on every other email provider except ours.
    I have contacted the hoster and they cannot find any issues. I have used all setup wizards and followed all instructions to the letter.
    It is not a problem with our emails because we have another printer on the same email address and settings in another room and it works completly fine.
    When I test the email on the Admin Page it tests successfully. But When I  scan to email on the printer it does not work.
    any help with this would be great, I have ran out of ideas.
    Thanks alot!
    -Sean

    Hi GrsSean,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand the scan to email won't scan to a email with the .co.uk extension.
    I will be happy to help you.
    I would set the scan to email again by running the wizard to see if that will resolve the issue.
    How to Scan: From the Control Panel.
    If following the guidelines from this document doesn't work then I would recommend to call HP phone support in your country.
    Contact HP Worldwide.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a wonderful day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Kuler not working in illustrator 6 (creative cloud)

    Hi,
    I have the same problem, I have the creative cloud team 6, when I try to connect to kuler threw illustrator it says "A valid ADOBE ID is requiered to use this feature.
    When I try to write username it's already written but ut's grey and there is no option to type in the field.
    As well I downloaded the kuler air and when I enter to sign in it says: Error: klash please try again.
    It has been like that for a few days, since I downloaded it.
    working on MAC os x 10.8.4
    Please help ASAP

    Hi,
    I'm able to sign in to the website but not threw illustrator, (kuler is
    working in Photoshop)
    See 2 screen savers.
    Thanks,
    Keren
    2013/9/2 Neha Sirohi <[email protected]>
       Re: kuler not working in illustrator 6 (creative cloud)  created by Neha
    Sirohi <http://forums.adobe.com/people/Neha+Sirohi> in Kuler website - View
    the full discussion <http://forums.adobe.com/message/5645870#5645870

  • HP Simplepass not working with 4 beta

    After installing 4 beta I discovered that my HP Simplepass ideni0tty protection program will not work I get an error message
    firefox doesnt know howto open this address because the protocol (dpql) isnt associated with any program

    Hi Jero,
    Welcome to the HP Forum!
    There are some issues with the upgrade - even if your system came with Windows 8.1, there are a bunch of HP products that are not updated yet for the new 8.1 environment.  It is a pain, but the truth is that some things take more time than others.  I do not work for HP, by the way, this is just my personal opinion.
    Disclaimer:  I am not running Windows 8.1 at this writing;  I have some issues with the way in which 8.1 will treat some of my favorite setups...  I am not ready to commit to the discomfort.  Smiling.
    You do have to be on the latest SimplePass to have a chance at all for this to work.
    It appears that you are aware of the native Windows 8.1 fingerpring login service - this is a good thing.
    I do not know personally if the fingerprinter, native or not, will work with that new "feature" of Windows 8.1 that wants us all to log in with our Microsoft password.
    I did find a fix for Windows Live Login:  Quick Tip: Change to a local account in Windows 8.1
    If you can get your system set back to a local login and then make sure you are running the latest HP Simplepass,  things may fall into place.
    Latest HP SimplePass (at writing) is linked in the following file:
    SkyDrive >> look for and open the file named:
    Simple Instructions to Upgrade HP SimplePass
    I hope something here helps!
    Click the Kudos Star!
    It is a great “Thank You” for the HP Experts who are here to help!
    Kind Regards,
    Dragon-Fur

  • Organizer not working properly, please advise.

    The organizer imported all the thumbnails of my photos from my photo file but when i go to open that photo up it cant connect or find it. it does a "search" but its not found. i know my photos are there because i can open them directly from the photo file when i clich "Open with Elements Editor". I tried uninstalling /reinstalling, makingf sure no other programs are running. I would like to the Organizer as it is advertised. Any suggestions???? Thanks sara

    thanks will try!! & let you know what happens! sara
    Date: Mon, 28 Jan 2013 04:26:43 -0800
    From: [email protected]
    To: [email protected]
    Subject: Organizer not working properly, please advise.
    Re: Organizer not working properly, please advise. created by andaleebfatima1 in Photoshop Elements - View the full discussion
    Please launch Organizer and follow as per this screenshot-
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5027512-290342/450-270/28-Jan- 135-53-11PM.jpg
    Thanks
    Andaleeb
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5027512#5027512
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5027512#5027512
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5027512#5027512. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Portege M700 - Rotation buton and accelerometer not working

    Running Vista business 32 bit.
    When I put my M700 in tablet mode, and tilt the tablet to 1side and press the button next to the cursor button it used to rotate the screen to that direction.
    it doesnt do this anymore. I
    Also noted that all accelerometer utilities, like tilt, shake, and advanced security do not work anymore. hdd motion detection does work.
    I've reinstalled from recovery discs and installed original and new version from tablet extension and tvap. Nothing seems to help. I've also installed Windows 7 ultimate 64 bit, it doesnt work there either. Ive actually noticed that it also doesnt work in vista because of it not working under Windows 7.
    I'm wondering whether or not my accelerometer is broken or not because it used to work with the original installation discs or is this a software issue?

    same problem here with a m400. 3d viewer isn't available in the hdd protection utility, accelerometer not working and rotation not working too. hdd protection is working. i have swapped hard disks with another m400 (on which these tools are working okay) the result is- they don't do on this m400- if i put the harddisk back it does work again- so this seems to be a hardware problem (at least with mine)-
    to give you a workaround- use the 4-way joystick on the tablet- push for as logn as a second or two and the windows mobile device center will occur here you may easily change display orientation.

  • Page protection not work for smart form

    I want to my item data in the same page.
    ex: item no.  material   description   quantity
                 10   0000001  material CH  10
                                      material EN
                                      long text 1
                                      long text 2
    In smartform, i had added folder under loop. and set page protection.
    But page protection still not work.
    Please help. Thanks a lot!!

    Hi Nicole,
    it works in smartforms the procedure is select text elements and give /:protect and paragraph name like p1: text wht ever u want P1:text similary how many ever  u want end it with /:endprotect
    it looks something like this
    /:protect
    p1:
    p1:
    /:endprotect.
    check !
    regards,
    sana.
    reward if helpful...

Maybe you are looking for