Hi ,Query on Landscape.
Hi Team,
Would appreciate your reply on this...
While deciding on the landscape during Preparation phase we realize that we would have 3tier landscape with DEV, QAR ,PROD servers.
Are these 3 different servers with R3 installed separately into it individually or R3 is installed in one machine and these bifurcations are virtual?
If R3 is installed in 3 machines then physically QAR or PROD are separate machines ..
I have just installed R3 onto my personal system and while configuring the GUI and adding server components i have added all of them .
I have created 3 boxes in this gui with dev,qar,prod..
Physically QAR and Prod should be different systems altogether ..
Please help me understand this..
Thanks so much.
SK
Hi Srikanth,
Could you help me in understanding whether its advisable to have differerent environments in one machine as i see they are all on different IPs that makes it clear that all of these environments are on different machines . Solely for the production load to be had by onemachine wholly i believe.
I still am confused in that regard.
I have transported using se10 .
Same TR as you say is to be imported thrpough STMS ..
Can i give the authorization to myself to retrieve this into Quality through STMS?
Your help will be indeed very useful.
Thanks so much.
SK
Similar Messages
-
Query on ChaRM control on BAU v/s Project landscapes
We have Business-as-Usual landscape(DEV, QAS, PRD) which is controlled by ChaRM (maintenance project). To this environment, we plan to add a project landscape with Dev(P) and QA(P) systems for project activities.
Can we use BAU Solution Manager - where ChaRM is configured - to control developments in project landscape and later cutover respective project transports to BAU landscape?
Thanks in advance,
ShajiHi Invycktus,
Thank you very much for your quick reply. I have seen the blog on retrofit functionality. The retrofit procedure assists in moving BAU changes to project landscape.
My query is on sort of "reverse retrofit" I mean, can I create an Implementation Project in BAU Solution Manager as follows?
Dev(Prj) --> QA(Prj) --> Test(Project) --> DEV --> QAS --> PRD
Please note, DEV --> QAS --> PRD is already controlled by a Maintenance Project for BAU support. Can the implementation project and maintenance project co-exist on same Solution Manager for same SIDs?
Thanks again,
Shaji -
Query on Global Rollout Landscape Strategy
Dear All,
I need some information about Global Rollout.I am working in SAP BASIS.I need to finalize the system landscape.The query is,what would be our approach to implement the global template using solution manager:
1. Separate Implementation at two different sites(Location1 and Location2) with two sets of servers (DEV,QAS & PRD) with common solution manager between both the location where the solution manager will be working as a common server between (DEV1 & DEV2,QAS1 & QAS2,PRD1 & PRD2 respectively),so that the global template package can be transported from Location1 to Location2 by using Solution Manager.
So Total no of servers will be 7 (two sets of DEV,QAS,PRD & 1 solution manager).
2. Implementation with only one set of server (DEV,QAS,PRD) and solution manager at Location1. And only one Production server at Location2 so that the developed global template is common between both the location by solution manager.After developing local components at different clients (for different locations) at DEV,testing at QAS and transporting to PRD1,the global template is transported to PRD2.
So Total no of servers will be only 5 ( one set of DEV,QAS & 2 PRD,one solution manager)
Please guide.I need your help so that can finalize this asap.
Waiting for your reply,
Thanks & Regards,
SandipanHi Sandipan,
Always a pleasure to hear Global Rollout use
First, I will comment on the number of Solution Manager instances.
If there is no particular need for two separate instances of Solution Manager and the different Geographies/ Businesses involved are happy to share 'content' from same Solution Manager instance, you just need one Solution Manager.
With Global Template Rollout based out of one Solution Manager instance, things can be a lot more simpler. For example,
- you don't have to think about 'transporting' templates from source SolMan instance to target SolMan instance to provide periodic updates; they become available 'perpetually' for all Implementation Projects within the single instance
- you don't have to activate 'Change Requests' to capture the structure and content assignments in the project. Often, people find this to be very time consuming
Please go through SAP Note 603336, if you haven't done already. This is very important to read.
As regards the number of DEV, QAS, PRD you must have for Satellite Systems, it's entirely dependent on the way your programme requirements are. I would believe PRD to one, though the other boxes in between could vary as per needs.
As for SolMan, you need to have just one instance running to cover Template Project and all Rollouts based on that.
Best regards,
Srini -
Query of SRM components landscape
Hi friends
Actually i want to know a scenario where in which EBP,SUS,CCM(as supplier directory replicated from SUS),Strategic sourcing are used in Service Procurement of Extended Classic Scenario
thanks
regards
krishnaHi Krishna,
Components Landscape are detailed described on SRM Master Guide available at service.sap.com
Regards,
Marcin -
Can we copy query across the landscape?
Hi All,
We have a requirement to build queries in the Development system. These queries are already built in the Production system as Test queries. Now my question is can we copy these queries from Production System to Development System instead of creating them afresh? If that is possible please let me know how it can be done.
Thanks in advance
Hima BinduHi Hima,
Yes, the queries can be moved from production to development.
Please check these links..
Re: Reg : Transport req
Transport of queries from production to developement
These links mention the steps to be carried out.
Hope it helps you..
Thanks
Lavanya -
Media query does not work on my iPad (Was: media query question)
I am coding a site for mobile/tablet/desktop and while my desktop and iphone respond to the CSS, my ipad does not. The changes I make to the tablet in dreamweaver take, but when they go live the ipad does not respond. Obviously my media query must be incorrect but I cannot figure out the issue. Any help is much appreciated.
http://gbetza.mydomain.com/webservice2/test/KathrynFee/2014/profile.html
Thank you.Yes. That's inevitable because smart phones are getting bigger while tablets are getting smaller & bigger. There is always going to be some crossover. Think of it this way, when a tablet behaves like a mobile device, it takes on the mobile layout. When tablet behaves more like a desktop, it takes the desktop layout.
Similarly, a wide smartphone in landscape mode is apt to look like your tablet layout.
See FluidGrid Example below:
http://alt-web.com/FluidGrid/Fluid2.html
Desktop = 4-col layout
Tablet = 2-col layout
Mobile = 1-col layout
For illustration purposes, I added a thick gold border to the Tablet layout only.
/* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout. */
@media only screen and (min-width: 481px) and (max-width:768px) {
.gridContainer {width: 92%; border: 16px solid gold}
Nancy O. -
How to set-up BO Xcelsius Enterprise in a layered SAP BW landscape
Dear all,
We are implementing BO Xcelsius Enterprise next to an existing SAP Netweaver BW landscape (including SAP BW 7.0).
We want to use the direct Xcelsius-SAP BW connection using the BI Consumers Services from EHP 1.
Currently we're using a 3 system landscape for our SAP BW environment, a development, Test and production server.
A) Could you specify what the best practice is for implementing Xcelsius Enterprise as tool:
Option 1: Only 1 Xcelsius server supporting the whole BI landscape
or
Option 2: set-up 3 Xcelsius servers, one for BW development,
one for the test environment
one for the production environment
And what are the transport possibilities in the 2nd scenario?
B) Also we would like to know how the live-data connection is working when a dahboard user is refreshing the data in the dahboard:
1) is the BW query triggered directly from the Xcelsius Dashboard to the SAP BW server and is the dataflow going directly from the BW server to the Xcelsius Dashboard ?
or
2) is the BW query triggered indirectly from the Xcelsius Dashboard to the SAP BW server via the Xcelsius Enterprise Server and is the dataflow going indirectly from the BW server to the Xcelsius Dashboard via the Xcelsius Enterprise Server ?
Thanks in advantage for you're answers!
Kind regards,
Marc NuijtenHi Marc,
Option 1: Only 1 Xcelsius server supporting the whole BI landscape
or
Option 2: set-up 3 Xcelsius servers, one for BW development,
one for the test environment
one for the production environment
And what are the transport possibilities in the 2nd scenario?
>> In regards to the direct connectivity towards SAP BW there is no need to have a SAP BusinessObjects server environment for Xcelsius. The Xcelsius file is hosted inside the SAP NetWeaver BW system and it is also a transportable object.
B) Also we would like to know how the live-data connection is working when a dahboard user is refreshing the data in the dahboard:
1) is the BW query triggered directly from the Xcelsius Dashboard to the SAP BW server and is the dataflow going directly from the BW server to the Xcelsius Dashboard ?
or
2) is the BW query triggered indirectly from the Xcelsius Dashboard to the SAP BW server via the Xcelsius Enterprise Server and is the dataflow going indirectly from the BW server to the Xcelsius Dashboard via the Xcelsius Enterprise Server ?
>>> That depends to a certain degree on the dashboard design. You can call the connections when the Xcelsius dashboard is being executed but you can also decide to trigger the connection.
ingo -
You do not have permission to view the System Landscape Directory.
Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino. -
Problem when trying to publish Query through BeX in Portal as iView
Hi ,
We are trying to publish BW 3.5 query in EP 6.0.
when we are trying to publish the query as iView in portal, it gives the error message 'System Error'. The J2EE Error Log contains the following error :
#1.5#001321FC0EDF001D0000000100000AF800042349427FEAFD#1164697462095#com.sap.security.core.server.jaas##com.sap.security.core.server.jaas#J2EE_GUEST#2##BID#AMARNATH_RR #6AA3FE0EADF14B2593F0019B1DB52607#SAPEngine_Application_Thread[impl:3]_17##0#0#Error##Java###Authentication stack: [].
[EXCEPTION]
#2#evaluate_assertion_ticket#javax.security.auth.callback.UnsupportedCallbackException: Unsupported callback!
at com.sap.engine.services.rfcengine.security.impl.RFCCallbackHandlerImpl.handle(RFCCallbackHandlerImpl.java:49)
at javax.security.auth.login.LoginContext$5.run(LoginContext.java:812)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext$SecureCallbackHandler.handle(LoginContext.java:808)
at com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule.removeSSOHeader(EvaluateAssertionTicketLoginModule.java:736)
at com.sap.security.core.server.jaas.EvaluateAssertionTicketLoginModule.login(EvaluateAssertionTicketLoginModule.java:390)
at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:69)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:154)
at com.sap.engine.system.SystemLoginModule.login(SystemLoginModule.java:90)
at sun.reflect.GeneratedMethodAccessor206.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:675)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:60)
at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#001321FC0EDF00140000000600000AF800042349427FF32E#1164697462095#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal()####BID#AMARNATH_RR #6AA3FE0EADF14B2593F0019B1DB52607#Thread[JCO.ServerThread-8,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error##Plain###java.lang.RuntimeException: com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized#
#1.5#001321FC0EDF00140000000700000AF800042349427FF40A#1164697462111#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal()####BID#AMARNATH_RR #6AA3FE0EADF14B2593F0019B1DB52607#Thread[JCO.ServerThread-8,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error##Plain###java.lang.RuntimeException: com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized
at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:188)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Landscape:We have both BW 3.5 and EP 6.0, SP 16 on the same instance in
same physical machine. EP 6.0 works on J2EE engine as an add-in installtion.
Steps we followed for the integration of EP with BW:
1)Create RFC Destination in J2EE Engine:
Parameters:
Program ID: xyz
Gateway host: abc.ad.company.com
Gateway service: sapgw00
Application server host:abc.ad.company.com
System number: 00
Client: BID
Language: EN
User: sapjsf
Password: ********
2)Maintain RFC Destination for SAP EP 6.0
Parameters:
RFC destination: SAP_EP
Connection type: T for TCP/IP connection
Description: SAP EP RFC Destination
Technical Settings:
- Type of activation: Registered server program
- Program ID: xyz
- Gateway host: abc.ad.company.com
- Gateway service: sapgw00
Logon/Security:
- Send SAP Logon Ticket: Activated
Special Options:
Unicode
3)Maintain Portal Server Settings for SAP EP 6.0 in table RSPOR_T_PORTAL
in BW 3.5
RFC destination: SAP_EP
System name: BIDEV
Default: Checked
Portal URL prefix: http://abc.ad.company.com:50000
RM prefix for BW metadata: <empty>
KM service URL: <empty>
P.S.:We have maintained one more dummy entry as per the SAP Note 815044
in the table RSPOR_T_PORTAL.
4)Maintain Single Sign-On in SAP BW
In transaction RZ10, We have maintained following settings:
login/create_sso2_ticket=2
login/accept_sso2_ticket=1
5)Export BW Certificate to SAP BW and
6)Import BW Certificate to SAP EP 6.0
We have followed the above mentioned two steps.
7)Create BW System in SAP EP 6.0
Parameters:
Log on methods: SAPLOGONTICKET
We have created the BW system and the Connection test in WAS Connection
is working fine.
8)Configure User Management in SAP EP 6.0
This step is not maintained as our scenario does not demand it.
9)Export Portal Certificate to SAP EP 6.0 and
10)Import Portal Certificate to SAP BW
This step is also maintained as per Performance Assistant guidelines in
SPRO.
The user that we are trying to log into BeX Web Query Analyzer is
Amarnath_rr who has 'SAP ALL' rights and the same user in EP is assigned'Super Admin' as well as 'Content Admin' role.
Can anyone throw any light on wat the error might be??Ricky,
a couple of clarifications :
1. Does the report execute independently on the web - when you execute in Query view over IE or through a web template
2. Check if SSO is properly configured - you can check if SSO is enabled by using TCode STRUST in BW. - the status of PSE should be Green.
Arun
Assign points if useful -
How to delete a trasonported query?
Dear Friends,
I have transported a query to production, but now i want to delete it in production. But, i do not have access to production. Is there a way to transport "deleted query".
Thanks in anticipation.Hi.
Now that the query is no longer in package $TMP, any change to it will be recorded in the BEx Transport Request. You should be able to delete the query in development and then transport the request with the deletion through the landscape. In the end, you should no longer have the query in production.
REgards,
Adam -
Problem sending a standard landscape SSRS report to a printer
I have successfully used the Printer Delivery Extension sample (_//msdn.microsoft.com/en-us/library/ms252091(v=vs.100).aspx) in a vb.net winforms application to send a 28” X 17” rdlc report to a specialty printer.
However, I cannot seem to successfully send an 8.5” X 11” landscape report (rdlc) directly to a printer without preview or printdialog using the same approach.
I have tried setting the paper size to “custom” in Report Properties in the report design (this automatically reverts to “Letter” due to the dimensions). I also tried reversing the width/height dimensions in the report design and in the “PageWidth”
and “PageHeight” settings in the <DeviceInfo> configuration info for the output emf file. I have tried various combinations of PrintDocument settings (including setting DefaultPageSettings.Landscape=true), with no success. I also tried setting
the DefaultPageSetting pages size to one I created programmatically with the correct dimensions (1100/850). Even though it is defined as a landscape report, I get either a report broken over 2 portrait pages, or a report squeezed into a smaller area on a single
portrait page.
I don’t know if there is a device setting that would “tell” the emf file that this is a landscape report, but it’s almost like that information is not being passed, despite of all the settings I have experimented with.
Does anybody have any suggestions? I have researched this online and tried every suggestion I have read. According to other posts, some others had been unable to get this to work also.
UPDATE: This problem is still unresolved. The report now prints in landscape mode, but the intended 10"X9" report is being compressed into an area 8.5" wide. This is an excerpt of the code I am using:
Friend Sub Run(ByRef report As LocalReport, printerName As String)
Export(report)
Print(printerName)
End Sub
Private Sub Export(ByVal report As LocalReport)
Dim deviceInfo As String = "<DeviceInfo>" & _
"<OutputFormat>EMF</OutputFormat>" & _
"<PageWidth>11in</PageWidth>" & _
"<PageHeight>8.5in</PageHeight>" & _
"<MarginTop>0in</MarginTop>" & _
"<MarginLeft>0in</MarginLeft>" & _
"<MarginRight>0in</MarginRight>" & _
"<MarginBottom>0in</MarginBottom>" & _
"</DeviceInfo>"
Dim warnings As Warning()
m_streams = New List(Of Stream)()
Try
report.Render("Image", deviceInfo, AddressOf CreateStream, warnings)
For Each stream As Stream In m_streams
stream.Position = 0
Next
Catch ex As Exception
ErrorRoutine.sendError("SendReportToPrinter.Export", ex)
End Try
End Sub
Private Sub Print(currentPrinter
As String)
Try
If m_streams
Is Nothing OrElse m_streams.Count
= 0 Then
End If
'set the print control for print document to StandardPrintController to suppress print dialog
printDoc.PrintController
= New Printing.StandardPrintController
printDoc.PrinterSettings.PrinterName
= currentPrinter
If Not printDoc.PrinterSettings.IsValid
Then
Throw
New System.Exception("Error: cannot find printer.")
Else
m_currentPageIndex
= 0
AddHandler printDoc.PrintPage,
AddressOf PrintListPage
Dim pkSize
As New PaperSize("Custom",
1100, 850)
printDoc.DefaultPageSettings.PaperSize
= pkSize
printDoc.DefaultPageSettings.Landscape
= True
printDoc.PrinterSettings.DefaultPageSettings.PaperSize
= pkSize
printDoc.Print()
End If
Catch e As Exception
MsgBox("Error:"
& e.Message, MsgBoxStyle.OkOnly)
End Try
End Sub
Private Sub PrintListPage(ByVal sender
As Object,
ByVal ev As PrintPageEventArgs)
Dim pageImage As
New Metafile(m_streams(m_currentPageIndex))
ev.PageSettings.Landscape
= True
' Adjust rectangular area with printer margins.
Dim adjustedRect As
New Rectangle(ev.PageBounds.Left
- CInt(ev.PageSettings.HardMarginX), _
ev.PageBounds.Top
- CInt(ev.PageSettings.HardMarginY), _
ev.PageBounds.Width,
ev.PageBounds.Height)
' Draw a white background for the report
ev.Graphics.FillRectangle(Brushes.White, adjustedRect)
' Draw the report content
ev.Graphics.DrawImage(pageImage, adjustedRect)
' Prepare for the next page. Make sure we haven't hit the end.
m_currentPageIndex += 1
ev.HasMorePages =
(m_currentPageIndex < m_streams.Count)
End Sub
When stepping through the code in PrintListPage using debug, ev.PageSettings.Papersize shows a width and height of 1100 and 850, and ev.PageSettings.Landscape is set to True. However, the rectangle shows a size corresponding to 8.5 X 11. In
Dim adjustedRect As New Rectangle(ev.PageBounds.Left - CInt(ev.PageSettings.HardMarginX), _
ev.PageBounds.Top - CInt(ev.PageSettings.HardMarginY), _
ev.PageBounds.Width, ev.PageBounds.Height)
I have tried swapping ev.PageBounds.Width and ev.PageBounds.Height, and actually hard coding numeric values for width and height, and the rectangle still appears to be dimensioned as portrait. Does anybody see what I am doing wrong, and how to fix
this?With active debug i got following information:
The first mail in the debug-log is with the source code as quoted in my first post, the second mail is when i cut out the part which generates and adds the attachement. I had to make the adresses anonymous, but the second mail contains a lot more adresses then the first, although they both use the same query with same parameters, etc.
Have i done something wrong with the attachements? Overwriting headers, syntax errors, anything? I'm out of ideas...
edit: Had to cut out the debug-log because it is too big. It just said that everything was working ok, but the first mail contains too few adresses and the second (without attachement) the correct number of adresses. I can mail the log, if you like. -
How do I get my Fluid Grid Layout page to resizes from portrait to landscape for iPhones?
Starting in portrait on my iPhone 4, the fluid grid layout page does not resize when I turn to landscape. After I refresh / resize to fit the page on landscape and then turn the iPhone to portrait, the page resizes just fine. Everything seems to be working just fine on the desktop, ignoring IE. Could it be my media query tags?
If anyone knows a solution, it would be much appreciated. Thanks.
Here is my test page: http://www.bedroomandmore.com/1_b_fluidGrid.html
Here are my media query tags (the first set of rules does not have the media query tag and becomes the default):
@media only screen and (max-device-width: 480px) and (orientation : landscape) {
@media only screen and (min-width: 481px) {
@media only screen and (min-width: 769px) {
Here is most of my media query CSS:
@charset "UTF-8";
/* Simple fluid media
Note: Fluid media requires that you remove the media's height and width attributes from the HTML
http://www.alistapart.com/articles/fluid-images/
img, object, embed, video {
max-width: 100%;
/* IE 6 does not support max-width so default to width 100% */
.ie6 img {
width:100%;
/* Mobile Layout: 480px and below.(smartphone portrait) */
.gridContainer {
width: 95.4184%;
padding-left: 0.5907%;
padding-right: 0.5907%;
#header {
clear: both;
float: left;
display: block;
margin-left: 0%;
width: 72%;
max-height: 0%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
top: auto;
padding-top: 0.25em;
#menuHorizontal {
clear: both;
float: left;
width: 118%;
height:100%;
margin-left: auto;
position:relative;
top:-1em;
display: block;
#slides {
clear: both;
float: left;
margin-left: 0.1em;
width: 119%;
position: relative;
top: -1em;
display: block;
/*Slides container: Important: Use position:relative; with top:-1em; together to position div.
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear: both;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting
slide_container is container size
slides_container div set the size of the image inside--adjust to fit image in it so it is not cropped*/
.slides_container div {
clear: both;
width: 69%;
display: block;
/* Mobile Layout: 480px. (smartphone landscape)
Inherits styles from Mobile Layout 480px.
Set to clear:none; to allow div to shift up
Or set to clear:both; to take a whole row of the screen*/
@media only screen and (max-device-width: 480px) and (orientation : landscape) {
.gridContainer {
width: 95.4184%;
padding-left: 0.7907%;
padding-right: 0.7907%;
#header {
clear:both;
float: left;
display: block;
margin-left: auto;
width:100%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
#menuHorizontal {
clear:both;
float: left;
width: 110%;
margin-left:auto;
display: block;
#slides {
clear:both;
float: left;
margin-left: 0%;
width: 68%;
display: block;
/*Slides container: Important:
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear:both;
float: left;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting*/
.slides_container div {
clear:both;
width:69%;
display: block;
/* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout.
Set to clear:none; to allow div to shift up
Or set to clear:both; to take a whole row of the screen*/
@media only screen and (min-width: 481px) {
.gridContainer {
width: 95.9456%;
padding-left: 0.5271%;
padding-right: 0.5271%;
#header {
clear:both;
float: left;
display: block;
margin-left: auto;
width: 100%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
#menuHorizontal {
clear:both;
float: left;
margin-left:auto;
display: block;
#slides {
clear:both;
float: left;
margin-left: 0%;
width: 70%;
display: block;
/*Slides container: Important:
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear:both;
float: left;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting*/
.slides_container div {
width: 100%;
display: block;I found the problem. There is a bug in Safari for iPhone 4. Use code to fix found at http://stackoverflow.com/a/6379407
-
I need landscape view [
Hi master
Sir I have many column I need landscape layout with A3 paper
I set orientation = landscape from system parameter and A3 from page setup but not give me at design time and give me landscape on printer or paper
Please give me idea I set all column in my report
Thanks
aamir
this is my query
SELECT TO_CHAR(STUJOURNAL.stujdate, 'YYYY') AS YEAR,DEPARTMENT.NAME,
COUNT(DISTINCT DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',STUSECMTAMT.STDCODE)) FALLs,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',STUSECMTAMT.totdebit)) FALLtotaldebit,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',STUSECMTAMT.totalcr)) FALLc,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',STUJOURNAL.cre_bal)) FALLcrebal,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',ROUND(NVL(STUJOURNAL.cre_bal/DECODE(STUSECMTAMT.totdebit/STUSECMTAMT.totalcr,0,NUL L,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) FALLreccrham,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))) FALLbalance,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'FALL',ROUND(NVL((NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))/DECODE(STUSECMTA MT.totdebit/STUSECMTAMT.totalcr,0,NULL,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) FALLbalcrham,
COUNT(DISTINCT DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',STUSECMTAMT.STDCODE)) SPRIs,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',STUSECMTAMT.totdebit)) SPRItotaldebit,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',STUSECMTAMT.totalcr)) SPRIc,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',STUJOURNAL.cre_bal)) SPRIcrebal,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',ROUND(NVL(STUJOURNAL.cre_bal/DECODE(STUSECMTAMT.totdebit/STUSECMTAMT.totalcr,0,NUL L,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) SPRIreccrham,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))) SPRIbalance,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SPRI',ROUND(NVL((NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))/DECODE(STUSECMTA MT.totdebit/STUSECMTAMT.totalcr,0,NULL,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) SPRIbalcrham,
COUNT(DISTINCT DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',STUSECMTAMT.STDCODE)) SUMMs,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',STUSECMTAMT.totdebit)) SUMMtotaldebit,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',STUSECMTAMT.totalcr)) SUMMc,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',STUJOURNAL.cre_bal)) SUMMcrebal,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',ROUND(NVL(STUJOURNAL.cre_bal/DECODE(STUSECMTAMT.totdebit/STUSECMTAMT.totalcr,0,NUL L,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) SUMMreccrham,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))) SUMMbalance,
SUM(DECODE(SUBSTR(STUSECMTAMT.sem_code,5,4),'SUMM',ROUND(NVL((NVL(STUSECMTAMT.totdebit,0)-NVL(STUJOURNAL.cre_bal,0))/DECODE(STUSECMTA MT.totdebit/STUSECMTAMT.totalcr,0,NULL,STUSECMTAMT.totdebit/STUSECMTAMT.totalcr),0),2))) SUMMbalcrham
FROM STUSECMTAMT,STUDEG,STUJOURNAL,DEPARTMENT,DEGREES
WHERE STUSECMTAMT.vhno=STUJOURNAL.ref_no
and STUSECMTAMT.studegid=STUDEG.studegid
AND DEGREES.degree_code=STUDEG.degree_code
AND DEPARTMENT.DEPTNO=DEGREES.DEPTNO
AND degrees.DEGREE_CODE NOT IN('SFC')
AND SUBSTR(STUJOURNAL.stdjid,1,3)='SPY'
GROUP BY TO_CHAR(STUJOURNAL.stujdate, 'YYYY'),DEPARTMENT.NAMEIn the object navigator, select the properties of the main section under the Layout. In the property panel, increase the WIDTH under the "Section" Part.
You could optionally increase the "Report Width" under the "Character Mode" to control the number of character per inch which you want your report to print.
However if your concern is to just increase the report width to have a landscape layout, you should do good by increasing the Width of the section.
Hope this helps! -
Error in Running a query on ABAP web portal
Hi Guys,
We are working in a environment where BIW is installed with only WEB AS ABAP. We do not have enterprise portal in our landscape. so we need to run our reports on
url http:
host:8000\sap\bw\Bex? Query=........
But when we run a query fro Query designer it is taking the following path in internet explorer.
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0FIAP_M30_Q0002&VARIABLE_SCREEN=X&DUMMY=1
So can someone help me to set the properties so that the query can run on path http:
host:8000\sap\bw\Bex?.....
regards,
saurabhHi Saurabh,
In SMICM transaction code we have to maintain the parameters in order to run the web report in the specified format.
i am listing some parameters in the below, Please have a look and see whether it can help u out .....
Services
icm/server_port_0 = PROT=HTTP,PORT=8000
icm/server_port_1 = PROT=SMTP,PORT=0
HTTP settings
icm/HTTP/max_request_size_KB = 102400
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/HTTP/server_cache_0 = PREFIX=/, CACHEDIR=/usr/sap/BSD/DVEBMGS00/dat
a/cache
Misc
icm/host_name_full = cauvery.com
icm/cancel_strategy = cancel requests without session (stateless)
rdisp/plugin_auto_logout = 1800
is/HTTP/virt_host_0 = :;
is/SMTP/virt_host_0 = :;
Once after maintain the parameters go and check in the SICF transaction code SAPBW---BEx + right click + test service. And check whether it is opening in the required URL path.
Regards,
Vara Prasad. -
Recreate a report in BI Landscape which is present in BW
Hi All,
Need to recreate a report in BI Landscape which is present in BW. kindly suggest as how to proceed with this?
Kind Regards
NishiHi,
Before going to create the report in the BI first you can check weather all the patches and notes are applied or not? because some reports if you create in 3.2 it will not open in BI7.
suppose if you changed teh queries in BI7 again you can't change that in 3.5 query designer.it will not alllow you to change.
if patches are installed properly you can opem all tha queried whatever u created in 3.5 those can open in BI& easyly.
Regards,
Chandra.
Maybe you are looking for
-
Hi, I must make sample code of web service calls for PHP and Java to our clients. So far I have got it working with PHP but I have trouble to successfuly call web service in Java. I have generated stub files with wscompile -keep -gen:client config.xm
-
Display a series in chart conditional
Dear all, I created a new chart region and this chart I created 6 series. I created 6 flags to tell which series to display. Is it possible to add a condition in a series to tell if we want to display or not. I can put it in the select, the line is n
-
Msi GT683R keyboard driver can't find
Hi guys, I will be strait, is there any one who now where to find "keyboard" drivers, people call it "function" keys drivers. I menage to find it one year a go, bat now no where an google or msi support page I can't find. Laptop is MSI GT683R bat I
-
2 apps on the same Weblogic instance
I have 2 unrelated apps. I need to add these to the same Weblogic instance. We run Weblogic 6.1 sp3 on Red Hat Linux 7.2. How do I do this, if I don't want any down time on one app, when I bring down the other. Can they exist on the same instance and
-
Stock Special Q valuated , problems
hi guru´s I´ve several problems. In first place I create a WBS from PS . My material master is a valuated material. After this, I create a PR, creat a PO with reference to PR and save. Problem: when I did the Goog Receipt the special stock Q is in m