Hi, question about resize images shortest side

Hi, I have PS ext CS6 64b on win 7 pc, I have more images files(psd), I want after finish to edit all, to automatic flatern psd files, change the size of each image to 1000px on shortest side(are landscape and portrait images), and save as jpg at 100% quality;I know how to use batch function in PS, I know to make this for folders with images with only width being shortest side or only for folders with height being the shortest side, but the problem it is that images are mixed ,even in the same folder, so , I must make a batch that open the file, ftattern the image, and run the script who will determine who it is the shortest side(width or height) then, resize to 1000px for shortest side, and save to jpg with 100% quality, and close the image.
The script I think it is like this:
if (width < height)
resize width 1000
else
resize height 1000
But I am not good at all on coding, so I ask here for help, how can I do it?

apologies, I forgot to check if your settings are in pixels. Try this;
var strtRulerUnits = app.preferences.rulerUnits;
var strtTypeUnits = app.preferences.typeUnits;
app.preferences.rulerUnits = Units.PIXELS;
app.preferences.typeUnits = TypeUnits.PIXELS;
var docRef = activeDocument;
var thewidth = docRef.width;
var theheight = docRef.height;
if (thewidth < theheight){
    docRef.resizeImage (1000, null,);
else{
    docRef.resizeImage (null, 1000);

Similar Messages

  • Noob question about HDR images

    hi everybody! i am reading this book about photoshop hoping to understand a lot more than i already know about pixels and colors and image dinamics and such..i got to the chapter about HDR images and here's what i dont get. as i understand, given a HDR image it has 32 bit depth meaning its file contains much more information about contrast and brightness than any existing monitor can output, so when u open it in photoshop u will never see its true quality. my question is( and i admit it may seem pointless to some, but i am committed to understand the cause and purpose), when converting it to 8 or 16 bit depth this window pops up asking me to tweak gamma, exposure, shadows and highlights, etc., but why is this linked to the conversion process? why not simply convert it, maintain the same appearance as before and then if needed manually adjust using all the image controls from the photoshop menus? i have CS6, if that matters.

    I don't know if this will help, but I've heard about HDR monitors (still very expensive), which supposedly very accurately display the HDR values. If you hang one on the wall in your house, people might think it's a window, since it is literally a source of light, in the same way a window to the outside world is.
    Possibly the most surprising use of HDR imagery is in 3D apps where global illumination models are used. HDR imagery literally is the only source of light for these images. There are no lights in the scene, only HDR imagery. This is because of the great dynamic range of HDR.
    A more practical (to me) use of HDR is when resurrecting antique images. If you scan multiple exposures from old prints, then create HDR, sculpting values in 16-bit becomes a very powerful tool, only due to the HDR value range.
    Photoshop, although it can edit very well in 16-bit, can only show 8-bit representations of HDR imagery, since almost all monitors are 8-bits per channel. Because of the monitors, we can only see a small part of what is actually present in the HDR file.
    I've never done it, but I imagine that if we all had HDR monitors, we'd need to wear protective glasses (like you wear driving in your car when the sun is out) most of the time to do our work.  :+)

  • Questions about resizing and uploading pictures ...

    I have set up a desktop folder, and can store my resized pictures there through the export function in iPhoto.  When I export though, there doesn't seem to be any way to export directly to that folder.  Instead, I have to export to the desktop, then drag all those files into my desktop folder.  Is there any way to export my resized photos directly into that folder without having to first go to the desktop, then the folder?  It just seems like extra steps.
    Another nuisance I'm encountering is uploading to sites like eBay and PhotoBucket.  If I chose to browse files on my computer, all that opens is the iPhoto icon rather than individual image files.  I know I can drag and drop, but is there any way of directly accessing either the individual images in iPhoto or the desktop shortcut which contains my resized images?
    I am coming off years of working with Windows, and their system of simply opening My Pictures and selecting the images you want to upload seems much simpler than this.
    I am running OS X Mavericks with a MacBook Air 2013.
    Thanks for any help.

    The iPhoto export dialogue is the same as any other. I wonder if you're seeing this:
    When what you want is this:
    Which allows you to access the specific folders you want. You get this by clicking the button indicated.
    As for uploading photos:
    For help accessing your photos in iPhoto see this user tip:
    https://discussions.apple.com/docs/DOC-4491
    It's the first one you want...
    You can work your photos on your Mac just like you did on Windows, but you've chosen to use a database with lossless processing. So there is a learnign curve if you change not only your OS but you're entire system of managing your photos.

  • My apologies  & question about resizing pic for wallpaper

    Guess what I wrote about resizing wallpaper was removed.  Didn't realize the way I wrote it was not allowed. I apologize to the list.
    What I Want to know is how to resize the wallpaper when trying to use a picture. It seems to blow it up making it unusable.  Can anyone offer a suggestion to get past this issue?
    Thanks

    Guess what I wrote about resizing wallpaper was removed.  Didn't realize the way I wrote it was not allowed. I apologize to the list.
    What I Want to know is how to resize the wallpaper when trying to use a picture. It seems to blow it up making it unusable.  Can anyone offer a suggestion to get past this issue?
    Thanks

  • Urgent question about resizing videos in Adobe Premiere

    Hello, forgive me for asking such a noob question but i have a presentation due in about 10 hrs and Adobe Premiere is giving me some headaches with the video i'm trying to make!
    I am trying to alter the dimensions of a movie in the 'monitor' window (the objective being to put 2 different movies side by side in the same timeline, but that's irrelevent). Screenshot is below
    http://s5.largeimagehost.com/display...sXUF&skey=nv28
    I've seen it being done before - their should be a border around the frame in the 'Sequence 01' tab that lets you resize it with your mouse. But It's not appearing for me... . is their some hot key or something..? It's probably something really obvious but i can't find it...

    You will also find links to many free tutorials in the
    Premiere Pro Wiki that will quickly
    show you how things are done in PPro, including picture-in-picture effects.
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Follow Up Question about shadow Images

    Hello!
    A couple weeks ago I asked about drop shadows set with images
    and I was
    given some helpful
    advice. Something came up and I wasn't able to get back to
    putting the
    information into application until a couple days ago. Forgive
    my ignorance
    but another question has surfaced. Many here advocate that a
    serious web
    page maker learn the ins and outs of HTML and CSS. I have
    been making
    significant headway in both. Some unanswered questions
    persist and while I
    can ferit it out
    through more reading and experiementing, it seems best, for
    expedience sake
    to ask
    the question that is effecting my immediate situation. I have
    three images - top, center (this one repeats), and bottom -
    that I am trying
    to place as a background. Here is the CSS that I
    have written for the accasion, based on the advice given here
    on this forum.
    The problem I am having is applying the div tags in the
    correct manner that
    will give me the results I am looking for. Here is how the
    code renders
    through IE 7:
    http://www.ors-llc.com/AboutORS/experiment.html.
    As you see
    the images are not one continuous background image. Obviously
    I have
    something wrong here; can anyone advise?
    Thank you in advance.
    #middlediv {
    background-repeat: repeat-y;
    background-position:center;
    background-image:
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai nrepeat.gif);
    #bottomdiv {
    background-repeat: no-repeat;
    background-image:
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai nbottom.gif);
    background-position: center bottom;
    #topdiv {
    background-repeat: no-repeat;
    background-image:
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai ntop.gif);
    background-position: center top;
    <div id="centercol">
    <div class="topdiv"></div>
    <div class="middlediv"></div>
    <div class="bottomdiv"></div>
    </div>

    Good luck!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Webdesigner" <[email protected]> wrote in message
    news:[email protected]...
    > Thank you! That worked very nicely. Thank you for the
    other tips as well.
    > Very helpful and appreciated.
    >
    > Best Regards
    > Webdesigner
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:[email protected]...
    >> Most importantly, stop using file/pathnames that
    contain spaces. This
    >> will bite you when you least expect it.
    >>
    >> Then control the top/bottom margins on the <p>
    tags in those divs. The
    >> gap you are seeing is due to the top/bottom margin
    here -
    >>
    >> <div id="middlediv">
    >> <p>sdftgsdfg</p>
    >> </div>
    >>
    >> There's no need to declare position:static, as it's
    the default -
    >>
    >> position:static;
    >>
    >> And, such elements do not have a z-index, top, or
    left property, so you
    >> don't need to declare them, either.
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >> "Webdesigner" <[email protected]> wrote in
    message
    >> news:[email protected]...
    >>> Hello!
    >>>
    >>> A couple weeks ago I asked about drop shadows
    set with images and I was
    >>> given some helpful
    >>> advice. Something came up and I wasn't able to
    get back to putting the
    >>> information into application until a couple days
    ago. Forgive my
    >>> ignorance
    >>> but another question has surfaced. Many here
    advocate that a serious web
    >>> page maker learn the ins and outs of HTML and
    CSS. I have been making
    >>> significant headway in both. Some unanswered
    questions persist and while
    >>> I can ferit it out
    >>> through more reading and experiementing, it
    seems best, for expedience
    >>> sake to ask
    >>> the question that is effecting my immediate
    situation. I have
    >>> three images - top, center (this one repeats),
    and bottom - that I am
    >>> trying
    >>> to place as a background. Here is the CSS that I
    >>> have written for the accasion, based on the
    advice given here on this
    >>> forum.
    >>> The problem I am having is applying the div tags
    in the correct manner
    >>> that
    >>> will give me the results I am looking for. Here
    is how the code renders
    >>> through IE 7:
    http://www.ors-llc.com/AboutORS/experiment.html.
    As you
    >>> see the images are not one continuous background
    image. Obviously I have
    >>> something wrong here; can anyone advise?
    >>>
    >>> Thank you in advance.
    >>>
    >>> #middlediv {
    >>> background-repeat: repeat-y;
    >>> background-position:center;
    >>> background-image:
    >>>
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai nrepeat.gif);
    >>> }
    >>> #bottomdiv {
    >>> background-repeat: no-repeat;
    >>> background-image:
    >>>
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai nbottom.gif);
    >>> background-position: center bottom;
    >>> }
    >>> #topdiv {
    >>> background-repeat: no-repeat;
    >>> background-image:
    >>>
    url(../Sitewide%20CSS,%20Images,%20etc/Images/Background%20Images%20for%20Text%20Area/mai ntop.gif);
    >>> background-position: center top;
    >>> }
    >>>
    >>> <div id="centercol">
    >>> <div class="topdiv"></div>
    >>> <div class="middlediv"></div>
    >>> <div class="bottomdiv"></div>
    >>> </div>
    >>>
    >>>
    >>>
    >>
    >>
    >
    >

  • Question about resizing a window

    hi,
    i have a null-layout window which is resizable. the origin size is e.g. 500x300. my question: how can i manage it that resizing is only possible up to specific values for height and width, e.g. 300x150? in other words: i want to define the smallest possible size to which my window could be minimized.
    thanks for every advice!
    kind regards,
    reinhold

    hi and thanks for your replies!
    sorry, i think that the desciption of my problem was not exact enough. here a second attemt: my frame is an input-mask with (for the time being) five buttons on the right side ("add", "edit", "clear", "update" and "close"). the first (upper) three buttons move their x-position dynamic when the frame is enlarged in width. they have a fixed y-pos. the lower two buttons move also dynamic: when the frame is enlarged in width they behave as the upper three buttons but when the frame is enlarged in height they change their y-pos dynamic to the frame's height. so they 'move away' in y-pos from the other three buttons. my first problem was, that when i reduce the frames height then the lower two buttons can be moved over the upper three buttons. i have solved this with the following componentListener:
    contentPane.addComponentListener(new ComponentAdapter() {
        public void componentResized(ComponentEvent event) {
             // position of the upper 3 buttons:  x-pos dynamic to frame.width, y-pos. fixed
             addButton.setBounds(event.getComponent().getWidth()-120,15,100,20);
             editButton.setBounds(event.getComponent().getWidth()-120,45,100,20);
             deleteButton.setBounds(event.getComponent().getWidth()-120,75,100,20);
             // position of the lower 2 buttons: x-pos dynamic to frame.width, y-pos dynamic to frame.height
             updateButton.setBounds(event.getComponent().getWidth()-120,event.getComponent().getHeight()-60,100,20);
             closeButton.setBounds(event.getComponent().getWidth()-120,event.getComponent().getHeight()-30,100,20);
             // check minimal frame.height (165). if reached, fix y-pos of the lower two buttons
             // so they cannot be moved over the upper three buttons     
             if (event.getComponent().getHeight() <=165) {
                 updateButton.setBounds(event.getComponent().getWidth()-120,105,100,20);
                 closeButton.setBounds(event.getComponent().getWidth()-120,135,100,20);
    });    that works fine, but my next (and main-) problem is, that i want to make it possible, that -if the height of 165 is reached- the BORDER of the frame could not be downsized anymore so that all 5 buttons remain allways visible. therefor i've found no solution in the forum's threads.
    thanks for all tips!
    reinhold

  • Easy Question about resizing video

    I searched 'Resizing Video' and there was too many unrelated results to a really simple question.
    In my old program "Premiere', to resize and move a video around was very easy. You could adjust the scale and X-Y values numerically, or you could use a Free Transform like in Photoshop. Simply dragging bounding boxes for size and aspect and also dragging the clip to decide it's location.
    The only way I know how to do this in FCP is I double click a clip in the sequence, it loads into the viewer, I go to the Motion Tab and then I can adjust the Scale, which is cool. But then I'm left with the Distort section to adjust position (and aspect if need be). In the Distort section there are 8 numeric fields of info to figure out and fill out just to get one clip in a different position correctly.
    I'm thinking there must be another way to adjust the location (or aspect) of a video clip without spending a bit of time on exact coordinates, I want to eye-ball where I want the clip to go and simply move it there. Is the Distort feature the only way to do this? If not, which is the fastest way to move and change the dimension of a clip.
    Thanks for reading, I hope there is another way, I'm not use to these calculations and they're slowing me down.
    Monty

    I searched 'Resizing Video' and there was too many unrelated results to a really simple question.
    That's because it's not a simple question at all and yet every one of those threads was related to the OP's question. As you discovered, there are lots of ways to interpret "resize," during capture, editing, effects, output, viewing, encoding, printing. But the solution was even simpler than you thought. All you had to do was open the manual or the online help system. Start taking the manuals to the gym with you. FCP is not Premiere. You're going to hate FCP, you're going to love FCP but it will never behave like Premiere beyond the elements of the functional paradigm. Forget Premiere.
    bogiesan

  • IWeb SEO tool question about tagging images: what do others do?

    I've been reading everybody's posts and started to use iWeb SEO Tool to add meta tags to all my pages. (since google couldn't verify my site with html) The page titles, keywords, and meta tags are relatively easy to decide on, but I don't know what to do about some of the images.
    If it's a definite photo of a subject, no problem, but what about those pesky shapeimage5_link0 and shapeimage_1.jpg files?
    What do i name them ? line 1, thicker line 2, arrow? (I'm being flippant here, ... really).
    I've just been calling them 'stained glass link' or 'next arrow link' but that's pretty dull.
    In some cases (for the lines) i've titled them with the name of the webpage again, but with several lines on the page, that tag is repeated, a lot. (And i read that if you repeat the same tag too frequently, your site is banned from google, which i don't want.)
    I thought they didn't matter too much but when i did a search from one of the search engines, the description of the web page actually included shapeimage5a.png or some such thing, and i don't want that to appear in people's searches !!
    So what do other people do about these? How do you name them?
    Thanks for the suggestions
    Elizabeth

    You'll get instructions about the HTML verification file here....
    http://www.iwebformusicians.com/SearchEngines/Tools.html
    The main thing with images is TEXT. Put a text caption for each. If possible, don't use the iWeb Photos and Albums templates.
    Put a text description at the top of every page with keywords in both the title and text. The spiders will pick up on this.
    If you don't do this, at least put a fairly long title tag in. Make sure the first few words are descriptive of the page so that they are relevant to a page bookmark.
    If the search engines are picking up on stuff like "shapeimage5_link0" it means that you haven't supplied any unique and relevant text!

  • Question about resizing a 'decorative' object

    Hi all
    Please bear with me this is tricky to describe.
    I have on a form I have obtained from formcentral an attractive banner: its just a nice colour nothing else but it spans the entire width of the form and is about 2 inches high.
    I wanted to copy & paste this and then shorten the height to 0.5 inches, but I have no height or width handles, just the four corner handles so the resizing maintains the aspect ration and I'm left with a copy which is the correct height but half or less of the width I need.... so I do multiple copies of these just to get coverage across the width of the form.
    This seems daft but I cannot see how to do this slicker....
    Anybody know please?
    thanks
    george

    Hi all
    Please bear with me this is tricky to describe.
    I have on a form I have obtained from formcentral an attractive banner: its just a nice colour nothing else but it spans the entire width of the form and is about 2 inches high.
    I wanted to copy & paste this and then shorten the height to 0.5 inches, but I have no height or width handles, just the four corner handles so the resizing maintains the aspect ration and I'm left with a copy which is the correct height but half or less of the width I need.... so I do multiple copies of these just to get coverage across the width of the form.
    This seems daft but I cannot see how to do this slicker....
    Anybody know please?
    thanks
    george

  • Question about brightening images and automating layers

    I've been using Photoshop CS5 for a while now but there are still a few things I'm wondering about.
    The first is about brightening an image without adding or reducing too much contrast at the same time.  If I increase the Brightness slider in the Brightness/Contrast window it often adds too much unwanted contrast and will wash out parts of the image or cause too much saturation.  Same thing when using Curves to brighten the image.  On the other hand I've found that using Levels to brighten the image reduces too much contrast and desaturates the image too much...and then when I add more contrast in afterward, parts of the image will become washed out again.  So far the best solution I've found has been to brighten the images with Shadows/Highlights, but this will often pose its own set of problems by creating or eliminating shadows in a way that doesn't flatter the image.  It can also add too much contrast in some cases.  Is there any other way around this that I'm missing?  Or is this all to be expected when brightening images?  The only other workaround I've found has been to add in separate un-affected layers for the areas of the picture that become too washed out when the brightness is increased but then there's always a problem of getting those parts of the picture to match up with the rest afterward.
    The second is about having layers for each change applied to an image.  Is there any way to have each change that is applied to an image automatically also be made into its own separate layer?  For example, if I sharpen a part of the image that would automatically become layer 2, then if I adjusted the saturation that would automatically become layer 3 and so on.  I know the History Panel does something very similar to this, and that's the type of thing I'm looking for, but I'd like each of those changes being made into a layer instead of just a recorded history state.  This way, for example, I could individually adjust each change with the opacity slider and compare the image with and without some of the changes by clicking the eye icon next to each layer.  I know new layers can be created manually but I'm looking for some way to automate it.
    Thanks for the help.

    The second is about having layers for each change applied to an image.  Is there any way to have each change that is applied to an image automatically also be made into its own separate layer?  For example, if I sharpen a part of the image that would automatically become layer 2, then if I adjusted the saturation that would automatically become layer 3 and so on.  I know the History Panel does something very similar to this, and that's the type of thing I'm looking for, but I'd like each of those changes being made into a layer instead of just a recorded history state.  This way, for example, I could individually adjust each change with the opacity slider and compare the image with and without some of the changes by clicking the eye icon next to each layer.  I know new layers can be created manually but I'm looking for some way to automate it.
    You seem to have no firm grasp yet on the concept of non-destructive image editing using Photoshop’s existing options, specifically Adjustment Layers, Smart Objects/Smart Filters and Layer Masks.
    The Layers structure is a much more valuable tool than the History in my opinion.
    Instead of applying an Adjustment or Filter destructively you might want to try applying it as an Adjustment Layer or a Smart Filter (either with its own Mask or on a copy of the Smart Object with a Layer Mask, because all Smart Filters applied to one instance of a Smart Object must share one Mask).
    Those Layers can subsequently be changed with regard to Opacity, Blend Mode etc. or the Adjustment and Filter settings themselves.

  • Question about an image in a text frame

    hi, everybody,<br />   i want to get the UIDRef to an image in a text frame and i used the codes below: <br /><br />UIDRef imageUIDRef = UIDRef(database, ownedList[i].fUID);;<br />                                                  InterfacePtr<IImageDataAccess> imageAccess(imageUIDRef, IID_IIMAGEDATAACCESS);<br /><br />(ownedList[i] is the list which contains the inline boss i want to get)<br /><br />here i always get an imageAccess  == nil, i think it is caused by the invalid imageUIDRef.<br /><br />can someone tell me how to resolve this??? or tell me another way to get the UIDRef to the image.<br /><br />Thanks a lot!!

    Oliver and Quake,
    during initial development, you frequently reach a method that just returns a UID, UIDList etc. That approach with IUnknown and debugclassutil is a way to determine the boss class of such a UID in clear text, for your further research.
    You would then go to the documentation (programming guide, API docs, samples) and find out about the typical use of this boss class. This mainly means you find the list of interfaces supported by the boss class.
    Open docs/references/sdkdocs/html/classIImageAttributes.html
    See at the bottom that this interface is on kImageItem and some strange others, but not on kInlineBoss.
    Open docs/references/sdkdocs/html/classkInlineBoss.html
    See it has an interface IHierarchy.
    If you do not find your desired interface on a boss class, that means you have to navigate to a different boss object.
    IHierarchy is an important interface for navigation in the page, because it implements the page item tree. So when the programming guide tells you to use IHierarchy to find an image from the inline boss, follow that path. On the other hand, it is just one interface of many, so you can't do that generalization that it fits all purposes. Even on the page tree you can encounter inlines, text on path that form a separate page item tree. To know the best path is called experience.
    In the release code you should not wire to specific ::GetClass values (as seen somewhere in this thread). Instead, you have an expectation of interfaces, and if an object supports them it is ok. Let's say I implement a new page item boss to support strange text flow or different image types. That page item will still have bounds. If you need bounds, find the appropriate interface and just use it. The same goes for attributes - if you deal with attributes in general and encounter a new attribute that supports the standard interfaces, just let it through.
    Oliver, I don't even know the boss class returned by IIDXMLElement->GetContentItem() for your specific purposes, but I would take the same approach. I use a plugin grown in the past 5 years that visits most interfaces and hooks into all notifications I ever encountered. This produces tons of output, but otherwise it is the same as with simple debugclassutil.
    An important issue is the preparation of test data. You just have to know that XML elements can point to many things in the InDesign universe, so tag a few tables, inlines, TOP, page items that use standoff and so forth, and see what you get. WYSIWYG at its best.
    Of course I could spend the whole day constructing examples, doing the analysis and copy-paste-post code. At least for me that is beyond the scope of the forum - maybe Adobe will some time replace Ken, otherwise there are the developer support cases. As I am not sponsored by paycheck, most of the time I try to keep my answers to short keywords or plain text - you will rarely see code from me. If you need that, there have been several postings on this list, and I am also available for consulting.
    Dirk

  • Question about taking Images from video in FCP

    I just recently upgraded from pinnacle to FCP 7 and am loving it. My question is when I try to take a still Image from video using Quick Time Conversion, the image comes out blurry or with bars around the edges of people. At first I thought It was because I was trying to capture a moving Image, but then I tried it with someone standing still and I ran into the same problem.
    I shoot with a Canon XH-A1

    Take the exported file to Photoshop and use Image Size to correct the aspect ratio of the image. Apply the Deinterlace filter in Photoshop to remove the interlacing.

  • A Question About Resizing Windows

    I'm a bit new to Mac so please excuse me if my question is a no-brainer. When I open a window in OS X, such as opening the applications folder, the window is always a little too narrow so I stretch it out a bit so that all my app icons are not cut off. However, upon opening it again I find that it has reverted back to its original size and I must resize it once again. This happens with Safari, Firefox, and a few other windows as well. Is there a way on the Mac to set the size and shape that a window will open up to and save it so I don't have to go around resizing everything? Thanks.

    Hi -
    Try minimizing the window (click the little '-' symbol in the upper left window corner) then when it drops into your dock, click on it again and it should open to where you initially minimized it from. Whenever you open a new window it should now open to this preferred size.
    Hope that works.

  • Question about Disk Image Backup/Restoring

    Ok, so i have a weird Boot Camp error that requires reformatting of my whole drive. Now I have thought up a procedure that I think will work, let me know if this is a viable option:
    1: Hook up a 320GB External Firewire Drive
    2: Boot up using the 10.6 DVD
    3: Go into Disk Utility
    4: Make an image of the Macintosh HD and save it to the External Drive
    5: Format the Macintosh HD
    6: Restore the Macintosh HD using the Image
    If i do this, will everything be hunky dory? Nothing is wrong with this? Thanks!

    Copy the content of the external to the internal--into an appropriately named folder. Then, clone your internal to the external. I would just use DU. First, use DU to partition the external GUID--which also will format it OS X extended (journaled). You might want to make two partitions if you have room (see below). To clone, go to the restore tab; select your internal volume and drag it to the source box. Then, select your external and drag it to the destination box. Then, click restore. If you can't perform the operation without previously selecting erase distination, then select it; let DU erase again; and then click restore.
    In an hour, more or less, you'll be ready to take care of your internal drive issue. Piece of cake. When you have fixed the internal, then just clone you Sno install on the external back to the internal. If you made two partitions, then copy the original external data to the second partition and remove it from your Sno installs if you want.

Maybe you are looking for

  • My iphone is new and i get error 9 during upgrading

    I Got a new iPhone 4 16G three days ago and yesterday itune ask for upgrade for the new softwrae and during the upgrading error 9 appear i try to restore but always error 9

  • Can't get my account to work

    I purchased a converter product in Sept 2013 and paid $89.99. I now can't work the converter as it says I need to sign up for the product. I signed up for 1 year originally so it should still be working. I tried calling but was on hold for over 20min

  • Serial number in Assets standard report

    Hi, We are maintaing serial number for some asset classes but we for reporting purpose this field is not available in standard Asset accounting reports. There no such field in select fields either. Please tell me customizing settings if any to get th

  • ADF how can i execute a query with parameters when the page renders

    hi i am using ADF web 11g i need to execute a query with parameters when the page renders thanks

  • Text buttons and roll over

    Hi I have text buttons and want to make the text bold when the user rolls over. (this is a menu) Are there any other ways besides having the text as a master slide and then click boxes and roll overs, I realise I can do text buttons but there is a sm