Hi,Regarding Plant Excise registration

Hi everyone,
i need to have an answer to my question
1) with in Plant we are maintaing several plants like maintainence plant, production plant etc and excise register is maintained for plant.
my question is the same excise register is applicable to plants within that plant
or we need to create new excise registers for those plants within that plant.
If so, How it can be done?
Plz guide me
Thanks & regards
Swathi

Hi
The same is applicable to all the Plants , as in actual business the Plant is only one.
Only in SAP we are differentiating these. These Plants donot actually exist.
Thanks & Regards
Kishore

Similar Messages

Problem regarding Plant-Excise Group configuration

Dear Xperts,
In this business scenario, a Plant is acting as a Manufactuing Plant and as well as a Depot concurrently.so we do have two Excise registrations , one for depot and another for Mfg. Plant.We have defined two Excise groups also , one with Depot indicator.
Now when we are going to assign the same plant code to two different Excise Groups ,system is throwing error of dupicate entry in table J_1IWRKCUS as the Plant column in this table is the only Primary Key.We want to create/modify this Primary Key to Plant-Excise Group combination.How can we proceed?
Pls note that we ca not create two different virtual Plant codes.
Regards,
Soumick

Hi Expert,
Create the Excise Registrations as per your requirements, if you have to create the depot as plant, if you have a separate Excise Registers.
and assign the Plant and Depot(Second Plant) to one Excise Group and try to do the remaining configuration.
For further reference do refer the below link.
http://wiki.sdn.sap.com/wiki/display/ERPLO/CIN+Configuration
Regards,
GK
SAP

Multiple plants with same excise registration

I have 8 different manufacturing facilities/locations inside the same campus. Due to business requirement I have to make each of these manufacturing locations as plants. But, this campus/location is given only one Excise Registration by Govt. This company is maintaining only single set of excise books like RG23 registers, etc not as per each manufacturing locations.
*_My question is:*_
1.Can I assign multiple plants to the same Excise Registration in
SPROLogistics u2013 GeneralTax on Goods MovementsIndiaBasic SettingsMaintain Plant Settings
Will there be any issue?
2. Do I have to make multiple excise group or single excise group for plants?

If your Plants / Depos are Excisable then you have to create Separate Excise Group & Series Group.It will help you to see Excise Registers as per the Plant's different Excise Group.
Best Regards,
Ankur

CIN and 3 Plants having a common Excise Registration

Hi Experts,
Please provide the solution for this.
I have an organisation which has 3mfg units.I want to treat this as Plants 1,2&3
Most of the raw materials are common for all the three plants.Also they have one Excise registration for all 3 units.My query is whether all the 3 plants can have common RG Registers ?If i have 2 company codes in a single client ,will my excise registers be different for both tthe company codes??
Regards
Pratap

hi
yes u can give the 1 excise registration for all plants
but practically is it possible to have 1 registration for all three plants??? plz clear this with ur client
and also u can have a single register for all plants
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
regards
kunal

Mfg excise registration plant wise......?

hi gurus
can u tell me,how should i proceed,
1) can i extend single manufacturing excise registration for five plants all are in single roof...?
2) if, i have extended for all plant then whether excise group & series group remain same or different as i want to maintain dummy register at plant wise & single consolidated register
guide me
please
Regards
ROC

Hi,
As far i am understanding your query, your main intention is to keep one register for all plants.For this reason you can keep one excise group. your excise entries are basically depends upon excise groups.
Now as you are saying excise registration are different than you can not keep one exice group from SAP point of view there will not be any problem coz its software only you need to check from your client if they are maintaining different excise registers or consolidated one. Secondly if they move material from one plant to another plant do they raise any kind of proforma excise invoice if answer of all these question is yes then keep excise group saparately for each plant
Regards
Vivek

Plant & Excise Group in Project System Environment

Dear All,
Our scenario involves Project System. Client has projects going on all over the country & overseas.
We are creating Plant for all the projects.
a) Here is it necessary to create Excise Groups similar to the number of plants?
b) Or does it depend on the number of Excise Registration Numbers?
c) Here if we have multiple plants & create one Excise Groups, will it create any problem in excise account determination?
Pl advice which factors to take into consideration in this regard?
Thanks & regards,
Gov

hi
as per the definition of excise registration
An entity in India that is entitled by law to produce any goods liable to excise.
Each entity is assigned its own excise registration number.
Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations
when comes to excise groups generally we take one excise group for one plant, but we can also have more number of excise groups when accounting demands so

Single excise registraction to two excise registration with same company code

Dear all,
Our customer is using single excise registraction now with three plants and one company code and doing STO between the plants with shipping (641/101). We have implemented SAP with the above scenario. (SAP ECC 6.4 implementation with TAXINN procedure)
Now, the excise registraction is splitted into two, out of three plants, two plant comes under one excise registration and remaining one plant comes under another registration.still all the three plants are under the same company code only.
Need your help on what are all the changes interms of process and configurations
Earlier response will be highly appriciated
Reg
Sridharan

HI Sridhar,
You have to define customer, vendor option but without account aspect.
Following are the steps in STO between a plant ( seperate Excisable units)
You will create an STO ( Purchase order from Receiving plant)
1: Create Delivery and excise invoice on the basis of performa invoice ( in performa invocie no accounting entry) Excise register will be updated on the basis of this not account entry would be as below:
Delivery: ( movement type 641)
Stock at receiving plant Dr to
Stock at Sending palnt
You would be following standard cost incase of SFG and FG. so materail valuation would on same basis and there may be valuation difference.
Excsie invoice generation:
Excise Clearing account Dr To
Excise Duty payable
Excise Duty Cess Payable
Excsie Duty hCess Payable
At receiving palnt you would receive material through MIGO no account entry will be generated only physical receepi of material.
Capture the excise in J1iex wrt to excsie challan.
Hope the process will help you.
Regards
Pankaj

Mfg .excise registration

hi gurus
can u tell me,how should i proceed,
1) can i extend single manufacturing excise registration for five plants all are in single roof...?
2) if, i have extended for all plant then whether excise group & series group remain same or different as i want to maintain dummy register at plant wise & single consolidated register
guide me
please
Regards
ROC

First of all, check with your client there should not be single excise registration for 5 plants.
If they say that they have single only for all the five plants and they want to plant wise as well as consolidated excise register for the plants then it is not possible.
Either you can have plant wise excise registers for which you have to create those many excise groups or consolidated for which single excise group for all the plants.

Excise registration

Hello,
I am defining plants as storage locations here. But problem is excise registration. Is it possible to have multiple excise registration for 1 plant?

Hello,
If the entities are registerd to the tax authorities as different you have to use different registers.
Or if you have only a single excise registration for both the plants, you can use the same excise group for both the plants and thus the same excise registers.
If you have any dout ......extend the log
Regards
Mahesh Naik

Plants / Excise Group / Series while preparing Purchase Orders, Sales Orde

Dear all,
sap gurus plz do need ful
Presently we are making some mistakes by selecting wrong Plants / Excise Group / Series while preparing Purchase Orders, Sales Orders, GRIR and Invoices. We need to make it mandatory to select respective Plant / Excise Group / Series only, so that no-body can select other plant except the respective document.
full points awarded,
regards
deepa

Hi,
For a particular user, you can set the user parameters in transaction in SU3 wherin you can set the default values.
Regards

Merging of excise registration

Hi experts
We have 2 different excise registrations for two plants.now we have to merge both the excise registrations in one. pl suggest the precautions / necessary config to do the same considering all existing balances,open POs, GRs etc
thanks in advance

Hi Nilesh,
Seems you have not gone through the detailed clarification and requirement given by me in above communications. Putting the same again for ref as under:
"We have 2 different excise registrations for two plants (Existing configuration in SAP).now we have to merge both the excise registrations in one. pl suggest the precautions / necessary config to do the same considering all existing balances,open POs, GRs etc"
Hope the requirement is clear now.
regards

Single Excise registration to two excise registration - procedure

Dear all,
Our customer is using single excise registraction now with three plants and one company code and doing STO between the plants with shipping (641/101). We have implemented SAP with the above scenario. (SAP ECC 6.4 implementation with TAXINN procedure)
Now, the excise registraction is splitted into two, out of three plants, two plant comes under one excise registration and remaining one plant comes under another registration.still all the three plants are under the same company code only.
Need your help on what are all the changes interms of process and configurations
Earlier response will be highly appriciated
Reg
Sridharan

Hi
Thanks for your replay.
As per my earlier mail, the current process is there are three plants under same company code and same excise reg. and the transaction performed between the plant using STO with shipping without transfer pricing.
Now we want to split the excise reg into 2 (2 plants will have excise reg as A, another one plant will have excise reg as B), Iam perfectly Ok with all the config steps, but my question here is the process,
how to handle the same process of STO, because we are now handling with material cost only to move the material from one plant to anothe, now we need to crfeate EI between the plants with assessable value,
If the option keeping the plants as vendor customer relationship, both the plants legal entitiy is same (company code)
Request your suggestion for the same
Reg
Sridharan

We have 9 excise registrations in sap now we want to cenvert 1 excise regis

hi all,
right now we have 9 excise registrations in sap. for LTU customers (large tax paying units) have a facility to convert many excise registration to one excise registration. we want to go for one excise registration now on wards is it possible if possible how?
please help me on this issue
regards
Mastan

Hi Ravi,
this thread is a bit old, I have just seen it by accident.
I am Architect in SAP IT. We are using Alfresco DMS and Share and WCMS within SAP.
We are running it on NW CE 7.1 and MaxDB.
We are building from source and have modified ant scripts to build the NW wars and assemblies to SDAs.
the standard delivery also requires some smaller changes to the hybenate maxDB dialect and some sctipt changes to iBatis.
Since CE is following the classloading in the specs to the point it is also causing some trouble with finding the "right" jars. If I recall correclt most issues are with java server faces libs.
It will take a while to dig all the information together and write something properly up, but if you are still interesed I could look into this.
cheers,
M.

Plant wise VAT, Service Tax, Excise registration numbers

Hi,
Could you please let me know where we have to update plant wise and company code wise VAT, service tax, excise and other statutory registration numbers in SAP.
Regards,
Dwarak.

Dear Laxmi Pathi,
Thnaks for your reply.
Actually the businees scenario is we are getting meterial from Vendors to Port area from the we send it to the respective customers.
Hear we are not selling any product, just providing services,
only one plant we are having for different services as i said in my earliear mail.
for this no excise invoice is required as i hope so.
for the different services we have 4 services registration ID, here we want to know where we have to maintain this in SAP SD CIN point of view, and how to configure the settings.
Please share your valuable Ideas with me for my further proceedings
Thanks
Raju.

Depot excise invoice without refernce to plant excise invoice

Dear all,
whiile we are creating depot excise invoice we will take reference of excise invoice of sto(plant to depot).is there any possibility for creating depot invoice with out taking excise invoice reference of (sto invoice-J1iin).then how we can manage for first time SAP system going live.plz give reply ASAP

Hi,
There is no standard procedure available to cancel this as you have already cancelled the Delivery, you will have to write a ABAP code to correct this entry in RG23D table.
Regards,
Murali

Hi,Regarding Plant Excise registration

Similar Messages

Maybe you are looking for