Hi sap gurus I have few questions

1. Which table do we store the characteristics in sap bw extended star schema
2. how does dimension-sid tables and sid-master data tables joined
with wht keys (sid id,dim id or characteristics)
3. Is it possible to have characteristics have no masterdata
4. what is dimension attribute and describied attribute in star schema
Thnks
manan

Hi,
In order understand these questions u should be clear with BW star schema
1.We store characteristics in master data tables
2.for earch and every dimid system will generate a sid in the sid table which is uniquely identified by system through this sid concept it links up dimid with master data table.
3.yes it is possible to have characteristics with no master data.(EG line item dimension)
4.dimension attribute is nothing but the characteristics infoobject,
but i am not sure about described attribute as i've not heard of it.
Regards
Madhavi

Similar Messages

Implminting ZFH have few questions.

I have few questions about ZFH setup.
Does the proxy server need to be out side the firewall? Or can it go
in the
DMZ zone? Does it have to be a windows box or can it be a Lunix box?

You can have the proxy either inside or outside your firewall. Where
you place it I suppose, depends on where the majority of your handhelds
will be connecting from (I'm assuming at least some will be connecting from
the internet via IP?)
If the proxy is outside the firewall, you would have to open port
2398, which is the default port for communication between the server and
proxy. If the Proxy is inside the firewall, you would have to open port 2400,
which is the default port for communication between the handheld IP
client and the proxy. Both of these port settings are configurable
The proxy must run on a Windows machine.
Hope this helps,
Dave Kegel
Novell, Inc
>>> Joe<[email protected]> 10/8/03 8:40:43 AM >>>
I have few questions about ZFH setup.
Does the proxy server need to be out side the firewall? Or can it go
in the
DMZ zone? Does it have to be a windows box or can it be a Lunix box?

I have few questions to ask about the Expert Series and Valet Series

Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as reply

With the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product.

Have few questions to ask regarding clusters

 1. In Weblogic server, how many servers can we scale to?(upper and lower limits,limitations)
 2.How do you provide load balancing across database connections and allow RDBMS
 load balancing for read only access?


1. In Weblogic server, how many servers can we scale to?(upper and lower limits,limitations)
 Depends on the app. Some will scale easily to 30 or 40 servers. Some won't
 scale to 2.
 > 2.How do you provide load balancing across database connections and allow
 RDBMS
 > load balancing for read only access?
 Depends. We use a driver that sends different users to different databases
 for some applications. Also we provide Coherence (http://www.tangosol.com/)
 to cache in the app tier with clustered apps.
 Peace,
 Cameron Purdy
 Tangosol, Inc.
 Clustering Weblogic? You're either using Coherence, or you should be!
 Download a Tangosol Coherence eval today at http://www.tangosol.com/
 "Amol" <[email protected]> wrote in message
 news:3c6cd4d8$[email protected]..
 > ...

Few questions regarding requirements in context of SAP products

Hello!
I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP products. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
c) standard pre-defined SQL queries and related calculations provided for use with industry standard reporting tools
d) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)
Thank you!
Regards
A. Henke

Hi Axel,
I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
regards
Barthez

Few questions on Report programming

Hi guys,
I have few questions on report programming.
1. What is the purpose of the statement REPORT zxxx. Even if i gave a name other than my report name i don't find any difference in syntax check/Functionality.
2. What is the purpose of list headings in report program? This option will come along with the text elements and selection texts.
3. What is the purpose of logical data base. Even if it is efficient why don't we use it frequently in our reports? Is there any limitations?
All usefull answers will be rewarded as usuall:-)
Thanks,
Vinod.

1. As u told that you dint get any syntax errors even after changing the Report Name,there are chances of getting Runtime errors.
2. The usage of List Headings is when you create a list in a program, you can also create your own list and column headings.
Refer this link for further info.
http://help.sap.com/saphelp_nw70/helpdata/en/e3/960a05eb0711d194d100a0c94260a5/content.htm
3. The Limitation of LDB is the usage of GET statements which act similar to SELECT - ENDSELECT And also if you dont choose the proper LDB,a single LDB may contain data retrieval from so many tables ,that it would make the entire process very slow and it is very hard to find LDBs for other modules than HR.
Only in HR module the data is organized in such a way thatusing LDBs would be much simpler.
Reward points if useful.

Few Questions on EP

Hi All,
I have few questions on EP implementation:
1) Can SAP r/3 transaction screen be accessed(say creating a PO using T-code ME21) from a company's subsidiary which is in a remote place(assume r/3 is intalled and running at headquarters).
2) Do we need to have Portal installation at the remote location aswell or just the internet connection with the URL to access the page and needed logon credentials?
thank you
Chandu

HI Chandra,
You can see the documentation available on SAP help and there are documents available on SDN too.
Refer to the following:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">Creating Transaction iViews</a>
<a href="http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/WAS/Enabling%20the%20SAP%20GUI%20for%20HTML%20with%20the%20integrated%20ITS%20on%20SAP.pdf">Enabling the SAP GUI for HTML with the integrated ITS on SAP</a>
<a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/736">Create SAP Transaction iView using SAPGUI for Windows</a>
Regards,
Siddhartha

Help on few questions on Personnel Cost Planning Detail (tx. PHCPDETL)

Hi Experts
I have few questions on Personnel Cost Planning Detail (tx. PHCPDETL) :
1. User authorizations can be restricted to Cost Item Level and/or Cost Center.?
2. Is it advisable to use structural authorizations on Planners- Line Manager levels? Can budget personnel cost plan be posted incompleted?
3. Can a cost item created for an Org Unit be populated through all Persons-Positions in your Plan?
4. Can you have general guideliness check for each event that line managers apply to their personnel cost plan?5. Is there an automatic way to display (not using Insert Quota Feature not IT1019) the Vacants in your Organizational domain?
6. Can I have by roles definition, Cost Items to be used by an specific planner through all plans?
I appreciate any guidance you can give me.
Amilcar

Pl check this <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/d6/031c3ac9fb1d75e10000000a114084/frameset.htm">SAP Help</a> for more info on SSO.
The check for SSO exists inside the std function module HR_HCP_DETAIL_START via the following Method Call
CALL METHOD viewer->enable_sapsso EXPORTING enabled = 'X' EXCEPTIONS OTHERS = 99.
You may have to copy the TCode & the subesequent function calls to eliminate this check.. I would suggest getting your BASIS to set up the SSO as a better option.
~Suresh

Hi sap gurus can anyone help to sort my Problem

hi sap gurus
i have a scenario
1) sales order should allow the BOM subitems which drives the demand. can u anybody tell me how to configure step by step. in addition to that , i need subitems should not be displayed on the customer invoice. how can i do that?
maximum points will be rewarded.

thanksin advance
sam sd

Hi
Not displaying the subitems in the invoice can be controlled in the program which is linked to your output type. If you inform your reqmts to the ABAPer, he should be able to code accordingly.
For demand planning, you may either have to use Sales Operations Planning or Transfer of Reqmts in SD. You can talk to somebody who knows either of these good and they can help you. Alternatively, you can post this specific question in PP also. May be you will get immediate answer for this.
Pls reward if this is helpful to you

PLEASE HELP IN ANSWERING FEW QUESTIONS

Hello Experts,
i have few questions, could you please help me in getting familiar to this:
1. What is Enterprise Structure?
2. What is Organisational unit for for all SAP modules?
3. can one chart of account can be assigned to more than one company code?
4. how many company codes can be assigned to single company?
5. All versions of SAP Till Now?
Thanks!!

Im pretty new to all this too, but this is how you validate an XML file against a XSD:
You need to set the features of youre parser so that it is ready to validate.
You will also need to extend the SAXErrorHandler with youre own CustomErrorHandler,
parser.setFeature("http://apache.org/xml/features/validation/schema", validate);
parser.setFeature("http://apache.org/xml/features/validation/schema-full-checking", validate);
parser.setProperty("http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation", schemaUrl);
CustomerErrorHandler handler = new CustomErrorHandler()
parser.setErrorHandler(handler);
parser.parse(xmlFiles);The XML file then needs t o have a reference to the XSD that is needs to be validated against at the top of the file:
xsi:schemaLocation="http://www.w3schools.com c:\\WINNT\Desktop\youreXSD.xsd
I think you will also need to catch and handle at least the SAXException....
Hope this helps,

Few questions on EB-SUS scenario?

Dear Experts,
I have few questions on EB-SUS scenario which you may help with your expertise. It will be helpful for those who are new to scenario?
1. EB (enterpise Buyer or SRM) -SUS scenario is used for requesting external staff? can it be used for non stock or free text items in extended classic? does it support direct material procurement ?
2. Does EB-SUS or SRM-sus support service item with hierarchy like MM-SUS?
3. EB-SUS scenario is basically on extended classic or standalone scenario? But, in extended classic scenario, it does support only Purchase order and PO response scenario? What badi's or customization is required to enable the confirmation and invoice for extended scenarios?
Full marks for good answers !!!
Thanks and regards,
Ranjan

Hi,
I am also interested in this question with another view of it:
- Can SUS be used together with SRM (EB) for consumables in standalone scenario?
- What are your experiences with SUS in general. I foresee that we would need some add-on development to the solution, is this easily done or does it take a lot of effort?
Thanks for any good input
Fredrik

Few questions about Satellite A300D-14P functionality

I have model Satellite A300D-14P for one month. Warranty 2 yrs. I have few questions, and asking for help, and suggestions what I should do?
*My camera quality * is VERY poor, Only with very much light on, I can get generally ok picture quality. Indoor, beside turned on both options, night mode or backlight compensation I hardly can see my face, very dark and poor quality. Second problem is blue led light, it is annoying because half of picture is always blue, somehow that light taking half picture which is always blue:((( I used notebook model from L300 series ( cheaper than mine) with same camera and that blue light, it is working perfectly :(
*Battery life and start up Vista OS*? ??In power save mode hardly 1.5h ??? Just surfing and nothing else....I asked Toshiba support here in Serbia about that and they told me that it is normal, and measuring of battery life (2, ...h) by specifications, is when my display is off and computer don't do anything ??? They also told me that normal start up time for Vista OS is around 1.45min maybe more???
If I install win XP is it possible to get battery life longer?
Do I need to go in Toshiba service or what?
Thank you very much and sorry if I am boring :))))
Nikola

Hay Nikola
You are not boring at all and welcome on this forum.
I don't know where to start. ;).
I have Satellite A300-1LI in front of me and I use it about a month now. Start-up time is very interesting theme and with right configuration you can optimise it and make it much shorter as with factory setting. Please read one very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
Do the same with your Satellite and I hope you will be satisfied.
Battery running time? I must say that information about two hours is realistic and I can confirm it. The same on my Satellite. But to be honest for mobile computing it is OK. I have changed several notebooks and just business notebook Tecra has had linger battery running time. What you can do is to check Toshiba support site and pick up info about more powerful battery. I am not sure but you can use Battery Pack (Li-Ion, 9 Cell, 6000mAh).
About cam I cannot say much. On my Satellite it works OK and I am satisfied. OK the quality is not the same like on good external webcams but for integrated cam it is OK.
If you are not satisfied try to talk with nearest service or try to compare it with some other Satellite by your local dealer.
So Nikola, if you have more questions please post again.

Few questions about Calendar / SimpleDateFormat classes

Hi.
I have few questions about Calendar class:
1. How can I get only date representation (without the time)?
after doing:
Calendar cal = Calendar.getInstance();
I tried to clear unecessary fields:
cal.clear(Calendar.SECOND);
cal.clear(Calendar.MINUTE);
cal.clear(Calendar.HOUR_OF_DAY);
But after printing the time, it seems that the HOUR was not cleared:
SimpleDateFormat sdf1 = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss");
System.out.println(sdf1.format(cal.getTime()));
---> 03/11/2004 17:00:00
Am I missing somthing?
2. I want to make sure that two different formats couldn't be compared. i.e., if I'll try to parse one String according to different format -- ParseException will be thrown.
String date = "19/04/2004 13:06:10";
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
Date dateObj = sdf.parse(date);
However, even though that formats are different, no exception is thrown and the return Date is 19/04/2004 00:00:00.
How can I cause to exception to be thrown if formats are not identical?
Thanks in advanced

The Calendar class has a few of what Microsoft would call 'features'. :^)
To clear the time, call:
calendar.set(calendar.get(Calendar.YEAR), calendar.get(Calendar.MONTH), calendar.get(Calendar.DAY), 0, 0, 0);
If you want 'pessimistic' rather than 'optimistic' date parsing, you have two options:
1) Call calendar.setLenient(false);
See if that is strict enough for your needs, otherwise:
2) Write code to ensure a stricter parsing of the string passed in. For example, you could very simply check the length of the string to determine if time data is also present.
When parsing, a string like '02/29/02' would parse to the date '03/01/02'. Setting lenient to false may fix this, but the surest way is to do some testing and then make the parsing more pessimistic where it suits your needs.
- Saish
"My karma ran over your dogma." - Anon

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

Few questions about upgrading database

Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanks

udayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini

Hi sap gurus I have few questions

Similar Messages

Maybe you are looking for