Hi showing conpany code missing in table t43s

hi
when i make process open items its showing company code missing table t43s
can any give valuable point
thanks
raju

Hi,
The table T043S contains Tolerances for Groups of G/L Accounts, you need to provide Tolerances for GL Accounts. The path is:
SPRO - GL Accounting - Business Transactions - Open Item clearing - Clearing Differences - Define Tolerances for Groups of G/L Accounts.
Assign Points if useful
Regards
Ravindra

Similar Messages

Web Tools Code missing under TABLES (Sync Manager)

Hello Experts,
I have recently did my testing on the Sbo_Demo Database.
I felt it was time for me to graduate and move on to the real data.
So i changed the database in SYNC manager to the one i would like to use.
Once i did this i started setting up my B2C Business partner and everything else needed for a successful sync.
i noticed an error stating PRX _ fields were missing. I figured i would start the procedure over using the document to successfuly uninstal any traces of WEBTOOLS.
So i started up a fresh install of web tools all seemed to go fine i setup my database when i went to sync manager under tables my WEB TOOLS CODE COLUMN was missing, in short my PRX_Fields were never constructed. i followed the removal process step by step from the included documents section page 13 " Removing the application"
Does anyone know what i am doing wrong? i thought the PRX files were created automattically with the webtools installer or sync manger
neither seem to be doing so.
Thank you very much for you time

Hello Sebastiano,
These columns are created by clicking "Install Plugin" on the first screen of the isynch manager. It is necessary to run this function every time you switch SBO databases. Also it is necessary to enter codes on the tables and click on the "Initialize Synch" button on the synchronization screen. This clears the webtools db of data from your previous SBO db. I believe this is covered in the installer guide.
Good luck,
James

Creating Z t code, missing T180 table.

Hi Gurus,
I have tried to create my own t code i.e. ZVA01 using t code of SE93, i have input all the fields and checked GUI relevant as well. still not able to create own t code.
When i have gone to ZVA01, giving error i.e T180 table is missing.
Please help me the complete process steps involved in this.
Thanks & Regards,
Vamsi.

hi
goto tcode SM30 and enter the table name as T180 and maintain the entries there
regards

FBL5N t code and BSEG table is showing wrong contract number

Hi,
The proces flow is contract number>sales order>DMR-->Invoice
Now when I am checking the VBFA table it's showing correct contract number against invoices but FBL5N t code and BSEG table are showing wrong contract numbers.
Why FBL5N and BSEG table is showing wrong contract number?
Currently we are using one enhancement and user exit is used to incorporate one customized field as identifier for bill type.
1. During the billing document release to accounting VFX3, The user exit triggering and it is update the customized fields and Net settlement indicator.
2. Using the Invoice number, get the fields VGBEL(Document number of the reference document) and VGPOS (Item number of the reference item) from VBRP and read table VBAP with VBELN and POSNR, to get DMR number (Sales Document) that created for the Invoice.
3. Use fields VGBEL and VGPOS on table VBAP to get the sale order number.
4. By using the Sales order number, get the Distribution channel to update Net indicator field
In accounting table BSEG-UZAWE = JF must be updated on the customer line.
5. Retrieve the sale order number and item level to get customized field from table VBAP
Any pointers.
Thanks
Ashu

Hi Reazuddin,
Thanks for your reply,
I am concercerned about BSEG table and using user exit EXIT_SAPLV60B_008 to post the document in FI.
Now in we have enhanced this user exit for contracts and included in this way.
SELECT SINGLE ZZ_CONTRACT FROM VBAK INTO (LC_CONTRACT) WHERE VBELN EQ cvbrp-vgbel.
Endloop.
*Moving the values to final accounting table
loop at xaccit.
xaccit-vertn = lc_contract.
xaccit-VBEL2 = xaccit-AUBEL.
xaccit-xref3 = lc_vbel2.
MODIFY xaccit .
ENDLOOP.
Clear: lc_contract,lc_vgbel,lc_vgpos,lc_vbel2.
But I am getting correct data when checked other clients( development and quality), this problem I am getting in production.
Do I need to ask the ABAP'er to debug this enhancement in production?
Thanks
Ashutosh

Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

Table entries missing in table TJ05

Hi Experts,
I have search in SCN regarding below issue...but i havn't get any solution.
Recently we upgrade to ECC EHP5 from 4.7,
The values "ZIN1" in table "TJ05" is missing in ECC 6.0. This value was available in 4.7 .
How can Z1N1 value insert in the TJ05 table.
above reason the "Non-updation of status in QM notification".(its effecting to Quality module.)
need to be insert values through configuration or through a tcode in SPRO..
i can't use this thru utilities->Table Contents->create entries in se11.
I know that we can forcibly insert values while debugging
if code = 'SHOW'.
set titlebar 'TAB'
elseif code = 'EDIT'.
Please provide valuble suggestion.
Thanks and Regards,
Syfulla

- Check also if records are missing in table TJ03.
- The code start with a "Z" and should have been added by your company/customer (*), so may have been erased by the upgrade (you know/remember the warning message like "Do not make any changes (SAP entry)" ignored by press ENTER
Look at BS* transactions like BS12/BS13 or BS22/BS23.
Regards,
Raymond
(*) Not found on a 4.6c, a 4.70 and an Ecc6 Ehp4 systems..)

Error while saving SO - item 000010 is missing in table YVBAP

Hello Experts,
We are facing following issue while delivering an order with BOM material.
1)     We created an order with sold-to customer blocked for delivery.
2)     Then we removed the block from customer and also from document header/shipping tab.
3)     Now when we tried to save the order it showed us an error-u2018item 000010 is missing in table YVBAPu2019
We are not able to find the root cause of the issue. Could anyone please help us in this error?

Hello,
Please check whether delivery block is also removed under sales Tab of item overview. Also check at line item level, whether delivery block is removed for BOM items. Once this done, save the sales order again and try to create delivery.
Br,
Tushar

FB70_The entry 001 is missing in table TAB_FSKB

Hi,
    I create a company code, when I use FB70, enter company code、customer number、invoice and posting date, then click enter, a warning message will jump:
The entry 001   is missing in table TAB_FSKB
Message no. F5100
    If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

HI
Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
Plz assign points, if its helpful.
Regards
Rajaram

Help, my iphone is in recovery mode, and itunes shows error code 1

help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!

me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982]     0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982]     5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982]     7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982]     8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982]     10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater:     BEGIN: Preparing first stage
[23:05:36.0982] bbupdater:         Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 5...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 4...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 3...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 2...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 1...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:         powercycling modem
[23:05:36.0982] bbupdater:         Creating transport, attempts remaining 0...bbupdater:         FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater:     END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log

Schedule line is missing in table YVBEP

Hi All,
We added a new custom field in schedule line tab. For which we added code in PAI and user exit MV45AFZZ. When we are adding a schedule line we are getting the following error message:
Schedule line 000010 0004 is missing in table YVBEP
Message no. V1506
The schedule line 0004 for the item# 000010 is having only 'confirmed qty' and 'rounded qty and order quantity' are both 0's. This schedule line was generated as there was no stock for the schedule line entered by user .
Please let me know what has to be done to resolve this issue.
Thanks,
Karuna.

Hi
See SAP Note 178328 - Problems due to incorrect user exits in SD.
This note says:
The Y tables play a role only for the change mode of document
processing. They contain the original status of those table entries
that have been changed during the current transaction. Therefore,
the entries in the Y table reflect the previous status of the
document in the database.
and
You add a table entry. There is only one entry in the X table
that has the update indicator I. There is no entry in the Y
table.
so, check in XVBEP that the field UPDKZ has the value 'I'.
Read carefully this note
Regards
Eduardo

Customization for register id 000 missing in table Registrations

Hi all,
when iam creating (factory sales)excise invoice in j1iin from billing document the error comes as:
Customization for register id 000 missing in table Registrations
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Please help me out.....
Thanks
Parin

Hi Parin,
Please follow the menu path as below and maintain the settings for the plant of your company code:
SPRO, Logistics - General, Tax on Goods Movements, India, Basic Settings, Maintain Excise Groups
Hope this solves your problem.
Regards,
Sreekanth....

Error F5100 - The entry FR 3 A1 is missing in table 021T

Hi all;
We have an error message when log on in French and try to run transaction F-44. After update Vendor Account, Company Code and click on the button "Process Open Itens" the system returns an error message F5100 - "The entry FR 3 A1 is missing in table 021T."
It is only happen when we log in French. Error message in French: "Dans la table 021T, il manque l'entrée FR 3 A1".
Can you help?
Thanks in Advance!
Gustavo

Hi Gustavo
Please refer to instructions in note 75750 to solve the incident.
Cause and prerequisites
Customizing error:
The user usually logs on to the R/3 System in a language other than
English. For the language English, the user has not maintained any line
layout variants under 'Financial accounting editing options: Document
entry' (Transaction: FB00).
Solution
After you have logged on in English, maintain the 'financial accounting
editing option: ...' by means of Transaction FB00.
Maintain the line layout variants for:
- Document entry
- Open items
- Line items
Example:
- 'Open items': Line layout variants
                (for example: A1, A1, A1, Z1, P1 or such like)
- 'Document entry': Line layout variants
                (for example: AA, STD)
- 'Line items': Line layout variants
                (for example: B3, A1)
- 'Payment advice notes': .... (SAP01, A1)
- 'Credit management': .... (ST1, S01).
Hope it helps
Kind Regards
davide

Error: "The entry 1111 is missing in table T043S"

Hello All,
While clearing a G\L account the below error was encountered:
"The entry 1111 is missing in table T043S"
1111 is company code,
However when I look at the table T043S, 1111 is there.
Could help me to figure out what might be the other cause of this error?
Thanks in advance!
Jhero

Hello,
In T043S and T043G (OBA3) you need to create two tolerance limits.
one tolerance limit with some name
second tolerance limit without any name (blank)
If you do not create tolerance limit blank then your tolerance is not going to work.
First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
Hope it should solve your issue.
Regards,
Ravi

F-32 the entry is missing in table

Hi ,
When we are performing the transaction F-32, we are getting the below error message
" The entry YYY is missing in table T043G ".
However, I could find the tolerance groups attached to this company code YYY in OBA3.
I have serached the forum and it says to create another entry for company code YYY in T043G and leave the Tolerance group as blank to resolve this issue..
But if i assign the Tolerance group as Blank to this company code, then would the tolerance check be completely removed for this company code ?
How does this work...Any idea on the after affects of this change...
Thanks,
Srikanth.

Hi,
Through a blank tolerance group, we specify the lowest level of payment differences and cash discount allowed for Customer.
this will be applicable for all customers in co. code. For any other set of customer whom we can have less control, we can create a new tol. group with desc and assign the same in master.
Regards,
Gangadhar

The entry ABCD ABCV is missing in table T043G

Hi
I have to clear an open invoice manually using F-53.
This is the error message i m getting
"The entry ABCD ABCV is missing in table T043G" [Here ABCD is the company code]
Please Help!
Thanks!

HI,
please check if Your company code is defined in transaction OBA3
or check the path IMG -> Financial Accounting -> Accounts Receivables and Accounts Payables -> Business Transactions -> Incoming Payments -> Manual Payments -> Define Tolerances (customers)
Go through the customer master and check which tolerance group the customer is assigned to (field' technical name is LFB1-TOGRU.
Regards,
Satish Muvva.

Hi showing conpany code missing in table t43s

Similar Messages

Maybe you are looking for