Hi some of my mail doesn't get through. Using mail and me/mac/icloud addresses

Hi ... I'm losing mail and I can't figure out why it's not getting through. Have three devices (iMac & MacBook, running Mac OS X 10.7.5, and iPhone 4, running iOS 6.0.1). I use apple's mail program and have icloud account. Yet some folk can't send me mail. Any ideas???

Thanks for picking up on this issue. The mail doesn't bounce back, so they think it's gone out OK. We've established that emails come through as long as there is no attachment. The sender is in my address book, so I'm at a loss as to what else I can check/do. Any suggestions?

Similar Messages

Mail doesn't get mail on waking

Simple situation:
Mail is open.
Mac goes to sleep.
User wakes up Mac.
Mail doesn't automatically receive new mail. Clicking "get mail" button does nothing.
Quit Mail and reopen. Mail works fine, new messages arrive immediately.
Same problem on my iMac and MacBook Pro.

Had a similar situation, although I use Airmail and not Mail. Opened up System Preferences, In Energy Saver I unchecked "Put hard disks to sleep when possible" and then changed "Computer sleep" to never. Now all my mail is there whenever I wake up my iMac.

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

I am running OS10.6.8 and have a mail box duplication. I use gmail and when I open my mail I have both the Apple Mail and another set of boxes for Gmail. Both get all mail and when I delete from one, it deletes from the other. How can I get rid of the dup

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

Lion mail doesn't allow shortcuts for bold and italics.

Hi,
I've come across this problem in which Lion mail doesn't allow shortcuts for bold and italics. I try pressing the short cut for Command + B or Command + I
but it does not affect the text at all. I have to move my cursor to the Bold or Italic icon to change a particular word's form.
Of note, Command + U allows me to underline a word just fine. I also write my mail in the default Helvetica, and in size 12.
Anyone know of a solution? I'm pretty sure it's just a glitch, but it's become a great annoyance for me.
Thanks for your help!

Hi,
I've come across this problem in which Lion mail doesn't allow shortcuts for bold and italics. I try pressing the short cut for Command + B or Command + I
but it does not affect the text at all. I have to move my cursor to the Bold or Italic icon to change a particular word's form.
Of note, Command + U allows me to underline a word just fine. I also write my mail in the default Helvetica, and in size 12.
Anyone know of a solution? I'm pretty sure it's just a glitch, but it's become a great annoyance for me.
Thanks for your help!

I make some chnages on PDF but then get an error (110) and cannot save. What is the problem

I make some chnages on PDF but then get an error (110) and cannot save. What is the problem

I'm not sure what changes you made to get into this situation. You might have more luck posting on the Acrobat forum : http://forums.adobe.com/community/acrobat
Gen

I have an iPad that is now over twelve months old, it doesn't get over used, however in the last few days, it has started to get very hot after only a few minutes use, is this a fixable issue

I have an iPad that is now over twelve months old, it doesn't get over used, however in the last few days, it has started to get very hot after only a few minutes use, is this a fixable issue

Is it getting hot only when charging?
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Please help: data doesn't get through when using NIO's UDP

Hi there, I have a 2D client-server game, using NIO's UDP. Whenever the clients send data to server, the data just disappears and not exception nor error appear at the server side.
Following are the portions of the code where the problem occurs, please help me have a look, many thanks.
(Please note, I'm using non blocking mode for both client and server, and have no problems with other portions of code, communication was fine, data did get through the network and processed by the server/client. Also, client's DatagramChannel "dChannel" is connected to server, however server's DatagramChannel is not connected to any one).
//***client's sending code***
public void sendEventToServer(int[] values) {
    prepWriteBuffer(values);
    try {
      dChannel.write(writeBuffer);
    catch (Exception ioe1) {
      System.out.println("Error when send event to server");
public void prepWriteBuffer(int[] values) {
    writeBuffer.clear();
    writeBuffer = ByteBuffer.allocate(128);
    if (values[0] == 1) { //fire event
      writeBuffer.putInt(0, firePacketNum);
      firePacketNum++;
    else if (values[0] == 2) { //positional event
      writeBuffer.putInt(0, positionalPacketNum);
      positionalPacketNum++;
    else {
      writeBuffer.putInt(0, -1);
    int j = 4;
    for (int i = 0; i < values.length; i++) {
      writeBuffer.putInt(j, values);
j += 4;
writeBuffer.flip();
//***server's code*****
public void sReceive(long startTime){
    do {
      readBuffer.clear();   //note, readBuffer is 3072 bytes, bigger than client's sending buffer
      InetSocketAddress sourceAddr = null;
      // read from the channel into our buffer
      try {
             sourceAddr = (InetSocketAddress) dChannel.receive(readBuffer);
      catch (Exception ioe) {
             System.out.println(ioe);
      // check for end-of-stream
      //I tried with "if (readBuffer.hasRemaining())", getting the same "data disappearing" problem
      if (sourceAddr == null) {
             //*********Problem: no matter how often the client is sending, this "if" clause is always entered
             //that is, data disappeared
             System.out.println("Server got nothing so breaks.");
             break;
      else {
             //******Problem: client keeps sending, but this "else" is never entered.
             System.out.println("Server now got someting from client.");
             readBuffer.flip();
             broadcastEvent(readBuffer, sourceAddr);
    while ((System.currentTimeMillis() - startTime) < 134);

Here's how the buffer filling stuff works, Ron Hitchen's JAva NIO O'Reilly press, has lots of good diagrams of this.
buf = ByteBuffer.allocate(10) // creates new buffer
0----1----2----3----4----5----6----7----8----9----10
|    |    |    |    |    |    |    |    |    |    |
----------------------------------------+
^                                                 ^
|                                                 |
position=0                                       limit=capacity
buf.putInt(5); // relative put, updates position
0----1----2----3----4----5----6----7----8----9----10
| 00 | 00 | 00 | 05 |    |    |    |    |    |    |
----------------------------------------+
                      ^                             ^
                      |                             |
                   position=4                    limit=capacity
                   updated
buf.putInt(4,12); // absolute put doesn't update position
0----1----2----3----4----5----6----7----8----9----10
| 00 | 00 | 00 | 05 | 00 | 00 | 00 | 0c |    |    |
----------------------------------------+
                      ^                             ^
                      |                             |
                   position=4                     limit=capacity
buf.position(8); // so we set the position ourselves
0----1----2----3----4----5----6----7----8----9----10
| 00 | 00 | 00 | 05 | 00 | 00 | 00 | 0c |    |    |
----------------------------------------+
                                          ^         ^
                                          |         |
                                     position=8   limit=capacity
buf.flip(); // flip prepares for write
0----1----2----3----4----5----6----7----8----9----10
| 00 | 00 | 00 | 05 | 00 | 00 | 00 | 0c |    |    |
----------------------------------------+
^                                       ^         ^
|                                       |         |
position=0                             limit=8   capacity
channel.write(buf); // write it out, assume all gets written
0----1----2----3----4----5----6----7----8----9----10
| 00 | 00 | 00 | 05 | 00 | 00 | 00 | 0c |    |    |
----------------------------------------+
                                          ^         ^
                                          |         |
                              position=limit=8   capacity
if it didn't all go out, the position would indicate the
first unwritten byte.

Have a question I do not use mail in my computer I use yahoo and I have all these emails and selected all and then delete then delete trash and they always come back how do I stop these old email in apple mail? I never send anything from there but I have

have a question I do not use mail in my computer I use yahoo and I have all these emails and selected all and then delete then delete trash and they always come back how do I stop these old email in apple mail? I never send anything from there but I have the same email in yahoo but delete them and they still show up in apple mail from day one how do I get rid of these once and for all.Please help
<Edited by Host>

I am soooooooooooo confused now. Ok, if you are having problems with Yahoo Mail and Gmail but you do not use Apple's Mail you need to do the following:
1 - Post in Yahoo's Mail forums and/or contact their tech support.
2 - Post in Gmails forums and/or contact their tech support.
Neither of the above are Apple's products.

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

I have Outlook 2011 installed on my Mac Pro, but I can not install it icloud. I can only get through imail, iCal and Address Book in Mac native anyone know teach me how to work with Outlook 2011 icloud? thank you

"iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion; or a PC with Windows Vista or Windows 7 (Outlook 2007 or 2010 or an up-to-date browser is required for accessing email, contacts, and calendars). Some features require a Wi-Fi connection. Some features are not available in all countries. Access to some services is limited to 10 devices."
From here > http://www.apple.com/icloud/

I can not re install Adobe Acrobat 7.0 professional on my computer. It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623. This is the worst interactionI have ever had with a

i can not re install Adobe Acrobat 7.0 professional on my computer. It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623. This is the worst interactionI have ever had with a company.

Hi joej49728017,
I am so sorry for the inconvenience caused. However this is just because Adobe Acrobat 7.0 is an outdated version & the now the activation server for it does not exist.
Please refer to the following KB doc. Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3
The above link will help you to install a special version that does not require activation.
In case you further need any help, please let us know. We will be more than happy to help you.
Regards,
Aadesh

Every time I click print in Pages I get the beach ball and my mac freezes.

I just updated to the newest version of pages and every time I click print in pages I get the beach ball and my mac freezes. Any suggestions on fixing this? I've tried shutting down and restarting several times...nothing seems to be working and I'm loosing/wasting time trying to fix this...

Hey there nmiller0528,
It sounds like you are unable to print from Pages at all from your computer. I want to recommend troublehsooting the Mac OS for print issues with this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling

I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastav

Hi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish

I lost my Ical and some of my contacts after installing ios5 on my iphone and saving on icloud

I lost my Ical and some of my contacts after installing ios5 on my iphone and saving on icloud. Please help!

I had the same problem and just figured out how to fix it. Go into your setting screen and then iCloud and turn off the contacts option. Then click on keep on iPhone. I did this and now all my contacts are back. YEAH!!!

Some outgoing e mails are not getting through

Some of the people I e mail are not getting any of my e mails. I use the verizon e mail online not outlook express or any other software. Most of my e mails are getting through but not all. Anyone have an idea why this could be happening? It's not that my e mail is blocked on the other end. One of the recipients is my dad and he isn't getting my e mail. I walked him through his setup and he does not have me blocked and I am in his address book.

Is there a particular domain you are having trouble with? Are you getting any delivery delay/failure messages?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

How come Mac Mail doesn't ding when new mail arrives?

My sound is on. Recently my Mac Mail doesn't notify me by sound when I have new mail. I'm running on 10.7.5.

I checked email several minutes ago. Activity Monitor now shows it as using 0% of CPU time. When that's the case it's now using any power at all. Every so often it will "wake up" to check for new mail. When that happens it will briefly use some CPU power. That interval can be controlled with the setting for "Check for new messages" in the General panel of Mail's preferences.
You didn't ask about RAM, but when Mail is idle I'd expect it put minimal demands on RAM.

Hi some of my mail doesn't get through. Using mail and me/mac/icloud addresses

Similar Messages

Maybe you are looking for