Hi strong functional and technical, user exit, oss note
HI
Transaction codes are J1INCHLN and J1INCERT.
for this TC, there is no user exit, but i have to use one of the fields as cheque no field i.e. in short i have to use one unused field for my purpose.
there is OSS note for this TC and in that user exit is there.
i want to know the OSS note for this TC.
what is the solution.
thanx
rocky
Hi,
General Notes
You can execute the following commands in the transaction code (tcode) field with Enter. You will find some useful transaction codes below to work in tandem with the following commands:
To call a transaction - In the same session (window) Enter: /nxxxx (xxxx = transaction code). - In an additional session, Enter: /oxxxx (xxxx = transaction code).
If you enter this function before any of the tcodes below, you are able to break out of your current screen/business and begin a completely new session. Otherwise, the current business process has to be terminated, and return to the initial user screen (the main menu) has to be initiated before entering tcode spro). /o tcode saves you the effort of having to do this.
To end the current transaction Enter: /n. Caution: Unsaved changes are lost without warning
To delete the current session. Enter: /i.
To generate a session list Enter: /o.
To log off from the system Enter: /nend.
From John O'Meara
OSS Note 0026171 has additional information on OKCodes in SAP, and is a very useful read
Thanks,
Shankar
Similar Messages
-
RE: BI functional and Technical Specification
Hi,
Can anybody share BI Functional and Technical Specification for SAP R/3 data extraction for modules FI/CO, SD, MM, WM/MM.
Thanks.Hi Hitesh
Bi Functional Specification is like this where you get the details of what is the report they are looking for and what does that do in detail explanation from the key user of that particular area.
and also you will receive an document saying that the particular tables and fields ...
After receiving that then you will be starting an work by preparing an Design document of what are the objects you are going to use in the system and what type of Data Source your are using and Targets etc.. This is nothing but an Technical Specification... and this also contains what type of the load is it...
Hope this helps you..
Thanks -
Functional and technical spects, and tickets issues.
Dear friends,
if any one know abt functional and technical spects documents , ple forward my mail
[email protected]
and also , how end users issue tickets. we can use any third party tools for getting tools and any levels will be there , how tickets will come to u.
ple clarify
Thanking u
suneelPlease describe your experience with BEx (Business Explorer)
A) Rate your level of experience with BEx and the rationale for youre self-rating
B) How many queries have you developed? :
C) How many reports have you written?
D) How many workbooks have you developed?
E) Experience with jump targets (OLTP, use jump target)
F) Describe experience with BW-compatible ETL tools (e.g. Ascential)
2) Describe your experience with 3rd party report tools (Crystal Decisions, Business Objects a plus)
3) Describe your experience with the design and implementation of standard & custom InfoCubes.
1. How many InfoCubes have you implemented from start to end by yourself (not with a team)?
2. Of these Cubes, how many characteristics (including attributes) did the largest one have.
3. How much customization was done on the InfoCubes have you implemented?
4) Describe your experience with requirements definition/gathering.
5) What experience have you had creating Functional and Technical specifications?
6) Describe any testing experience you have?
7) Describe your experience with BW extractors
1. How many standard BW extractors have you implemented?
2. How many custom BW extractors have you implemented?
8) Describe how you have used Excel as a compliment to BEx
A) Describe your level of expertise and the rationale for your self-rating (experience with macros, pivot tables and formatting)
9) Describe experience with ABAP
10) Describe any hands on experience with ASAP Methodology. -
Want to learn functional and technical requirements for UCM
Hi,
I'm very new to UCM. Can someone please send meplease tell me where to find functional and technical requirements for UCM from user and implementation perspective.
Thanks Very Much,
Andycan you be a little more specific?
Technical info can be found in the documentation. Requirements and so on.
What exactly do you expact from functional requirements ?
Edited by: Yannick Ongena on Nov 30, 2011 5:50 AM -
Functional and technical design for reports
Hello BW gurus,
I am responsible for creating/developing few reports in Prod Planning and Inventory Mgmt.
Is there a template for the Functional Design and Technical Design for the reports?
How do I go about making the functional and technical design?
Thanksjackofalltrades,
If you could give us the stage of the report -
1. whether you are reporting from existing cubes and this report would be an additional one on a existing cube or
2. The report has to be designed from the ground up ...
Depending on the same - the entire lifecycle will be different and also whether the query is to be shown on the web or through excel will be helpful.
You could have a look at ASAP Templates in the meanwhile.
Re: ASAP Methodology
Arun -
CS07 - Functional Module ? User Exit ?
Hi ,
Is anybody can give me some instruction ?
We would like trigger another program which we developed by ourself when use T-Code:CS07 to assign BOM to Plant .
Is any functional module or user exit we can use ?
Thanks !Hi Denny,
The following are the User Exits available for CS07 transaction,
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
Please select the appropriate exit which meets ur requirement.
Reward Points if useful.
Thanks & regards
Mahesh -
Pls send me Functional and Technical Specs
Hi Guys,
I want to know how Functional and Technical Specs prepared.
Can anybody pls send me both the specs to my mail id.
I will be thankful to one who sends me both the specs.
My mail id is: <removed>
I expect u send me soon.
Regards,
Divya SHi Divya
Go through this links....
Functional specs - tchnical specs
Contents of functional specs for BW project
hope it helps...
Regards
Tarun. -
Overall equipment efficency ..functional and technical
Hi
friends
doing a module pool for overall equipment effiency
as iam new in p.m module i need some functional help.
but have to create a z tables for it .
my criteria is
<b>header --</b>equipment
cost center
plant
functional location
<b>detail table</b>.
equipment
from date
from time
to dta
to time
operations--production,
maintaince
ideal
batch
material
reasons
Planned production quantity
equipment
month/hours
god hrs
planned production hrs
reason no
reason code
std hrs/min.
have to create table but iam stuck in normaliazation what should be
keys on and indexes on as there is no functional guy avalab1e here
i have to do it and this module pool should allow to modify delete
and change that can be done but ..on one screen this 2 table control
i have to display .
so pls give the suggestion for functional and technical
regards
answers will be awarded pointsHi,
See the Views VIAUFKS and VIAUF_AFVC ,
you will get all the fields related to PM module
See the fields and the data elemetns and create the tables and use them in the Table controls and design your screens and the code.
see the info on Table controls:
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
reward if useful
regards,
ANJI -
CRM Functional and Technical Overview
Hi All,
I have not explored CRM completely.
Want to learn functional and technical aspects of CRM properly.
Please suggest some links for good and effective recordings regarding CRM functional and tecnical aspects for the better understanding of beginners.
Thanks & regards,
AbhiHi,
There are lots of courses which would help you understand CRM.
CR-10
CR-100
CR-300
CR-500
CR-600
CR-700
You can check the following link for info on these courses
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000072627&
You can also refer to
http://help.sap.com/saphelp_crm70/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
which contains rich amount of information about SAP CRM.
Thanks,
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 9, 2009 5:06 PM -
InfoSpoke Functional and Technical Specs
Hi all,
I would be interested in seeing a good outline for both a functional and technical specification for an INFOSPOKE. If you have an actual example of either of these specifications it would be a big help. I need it specifically for an INFOSPOKE. I appreciate your help.
Thank you,
DaveHi David,
go thru these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
https://websmp209.sap-ag.de/~sapidb/011000358700002201112003
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f4/5c983cff567f5de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Archna -
Functional and Technical Specification Doc
Hi Friends,
Can anybody send me sample Functional and Technical Specification Documents for SAP CRM/ECC.
Thanks and Regards,
SurajHi Suraj,
Look at <a href="http://help.sap.com/bp_crmv150/CRM_DE/index.htm">Best Practices</a> , maybe it helps.
Regards.
Manuel -
Functional and technical requirements for CFTE
Hi all,
I have to prepare a pre sales meeting. the potential customer needs to know the functional and technical requirements to implement Cloud for travel and the technical limit. I found some information in the document SAP_OD_TECHNICAL. Does someone has further information ?
Thanks in advance for your help,
best regards,
lucie POLESEPlease refer to the Master Guide and Security Guide located at the link below (you have to select the latest release once you go to the page):
https://help.sap.com/travel-od -
Functionality and Technical configuration
Hi....
If any one have SAP QM functionality and Technical configuration book-late then provide to me
thanks in advance
BhaveshHi Gurus
Thanks for good reply because this will help for all QM leaders....
Bhavesh -
User-exit EXIT_SAPLSPOR_001 not executed (filter spool requests)
Hi,
The default SAP functionality provided to control the output controller functions via auth. objects S_SPO_DEV, S_SPO_ACT & S_ADMI_FCD does not do what we would like to do.
There's a user-exit available to implement some additional code: SPOOAUTH / EXIT_SAPLSPOR_001.
I've activated SPOOAUTH via CMOD and added a record in table TSPOPTIONS (AUTHORITY, value CUSTOM) which was mentioned in the documentation of the function module.
No other changes were made.
However, this user-exit is not called when I start trx. SP01.In the selection screen I choose to show all spool request from all users for a specific time period. According to the documentation this should trigger the user-exit.
Now the funpart begins:
I've debugged SP01 and found that FM RSPO_CHECK_JOB_PERMISSION contains:
IF INIT IS INITIAL.
data: v like tspoptions-value.
call function 'RSPO_OPTION_GET'
exporting
name = SPOPT_AUTH
IMPORTING
VALUE = v.
if not v is initial.
return value of v should be CUSTOM. However it is empty -> skips the user-exit.
The check in FM RSPO_OPTION_GET contains:
ALL 'RSPO_CACHE_CONTROL' ID 'AREA' FIELD 'OPTION' ID 'OP'
FIELD 'GET'
ID 'NAME'
FIELD NAME
ID 'VALUE'
FIELD V.
if sy-subrc ne 0.
perform write_trace1 using 'RSPO_OPTION_GET %s failed\n' name. "#EC NOTEXT
select single value from tspoptions into v where spoption = name.
Field NAME = AUTHORITY
Field V = empty
Return = 0 -> skips user-exit.
Have I overlooked something?
Any help would be welcome.
Kind regards,
MarkHi Mark,
Could be that the option value is being picked from cache/buffer (old value). You can restart the system and verify.
Also, after putting a break-point in FM RSPO_OPTION_GET, you can edit the value of 'v' in debugger and set it to CUSTOM, just to check whether the user-exit gets executed in this case. -
USER EXIT MB_CF001 NOT GETTING TRIGGERED
Hi All,
I am using EXIT_SAPLMBMB_001(MB_CF001)
I want it to be triggered after the document has been saved but its not trigeering..
How can I find out the reason???
Regards
ShilpaHi,
have you checked documentation for that enhancement? That function module is not called after goods movement creation.
The user exit MB_CF001 includes a function module that is called up
immediately before the COMMIT WORK when a goods movement is posted.
How do you test that FM? Some function modules from user exits are called in UPDATE TASK so they just ignore break points. In this case you can use the following trick. You need to enter an infinite loop into your user exit. Then you can connect to this program via transaction SM50 (Program/Session -> Program -> Debugging).
Cheers
Maybe you are looking for
-
iOS Cangjie input method can not be used. Original with Space Bar word selection function is invalid, as soon as possible to solve, it will affect the most users in Taiwan and Hong Kong.
-
Resume location tracking when Map control is in foreground again
As windows phone 8.1 does not have background location tracking, so then how to track the current user position, routes travelled, distance covered, time remaining etc. once the user comes back to our app foreground, because once in background we onl
-
Header Mapping in Idoc scenarios
What is the use of Header Mapping in IDOC based scenarios?
-
Twice now I have installed Photoshop Elements 7
but the help menu at top of page still does not work. How can I put this right?
-
Error on launching Applescript app
Hey, i created some Applescript app which i scheduled using Schedule manager or Task Till Down and everything was ok. Since 1 month, after a while i turn on the laptop and that everything is running, i receive the alert message (in attachment). If i