Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.
Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.
Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup
Similar Messages
-
Any help will be appreciated. How do I get them to fix the problem or delete the CD if they can't sell it?
Yes. All the other links work fine. My real question is: how do you point out that kind of mistake? They make all sorts. Mixing up the contents of CDs, sometimes to our advantage, sometimes not. I wish there were a simple way to point out those. Like you can on Amazon, for example.
-
Ipod 4th Generation - Won't turn on or charge - Reset didn't work
No charging, no turning on, no recognition by my iTunes for my 4th Gen iPod Touch. It is only about 6 months old. I tried the holding home and sleep buttons for 10 or more seconds but that did not work. Any other option besides going to the Apple Store and asking for assistance there?
ThanksTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
We started getting this error when we installed Lync Server. I already verified that the "RTCHSUniversalServices" group has “Replicating Directory Changes" permission.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
Directory partition:
DC=<domain>,DC=com
Error value:
8453 Replication access was denied.
User Action
The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Domain Controllers and Lync server are running on Windows 2008 SP2. Any other things that I could check?A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
Directory partition:
DC=<domain>,DC=com
Error value:
8453 Replication access was denied.
User Action
The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
oas4ever -
DSP3 opens but I can't access anything
I've recently updated my OS to Tiger, as well as install Motion 2 and Soundtrack Pro. Since then I have had all sorts of problems. I can open DSP 3, but not any projects. I can see the interface, but I can't access anything, it's like the program froze. My toolbar at the top of the interface is also not present. I've tried reinstalling every program (FCP, DSP, Soundtrack Pro, Motion, and Compressor) but I am still having the same issues. I can also not get compressor to even open. I just bounces once on the dock and the tower sounds like it starts to do something but then it just sits there. The export to compressor command is also greyed out in FCP. Soundtrack Pro and Motion also seem to be acting quirky when I open them, but I haven't really used them yet, so it could be normal. If anyone has any suggestions I would greatly appreciate it. Thanks.
AndyThanks for the suggestion. It did help. Why didn't that download when I would do the software update? Everything seems to be working now except for Compressor. It still just bounces once and then sits there. It is still greyed out in FCP as an export option. I guess I should take this question to the compressor discussion page, but if you have any other ideas I would gladly accept them. Thanks for your help so far. I am at least another step closer to having a working system again.
Andy -
How much does apple charge to fix a ipod 4th generation cracked screen
How Much Does Apple Charge To Fix A ipod 4th Generation Cracked Screen
Apple will exchange it for:
Apple - Support - iPod - Repair pricing -
Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALASounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock -
My Ipod 4th generation is almost unresponsive to my touch, and will not allow lockscreen access, and also is stuck on the "Not enough Storage" button. When I try to get rid of it, it does nothing. My ipod's power button, volume buttons, and home screen button all work, and I can still use my start/stop headphones to listen to music.How do I fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The home and lock button on my ipod 4th generation are both jammed. Is there any way to fix this? This makes the itouch difficult to use. Please help.
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it at an Apple store by making an appointment:
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Can anyone help me restore my daughter ipod 4th generation if the shut off button doesnt work?
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Then restore via iTunes.
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I am afraid to download the new update software ios 6.1.6. Because everytime I let it put new software on, It makes my Ipod 4th generation mess up one way or another. Usually it makes the wifi go off and I cannot get it back on. Then I can't even use the ipod! I am having a problem now with it shuffling. Do both red x's one on each corner right top and left top need to be on for it to shuffle? Thank-You; Sherry PS, I do not have a Mac. I have a dell window 7. and I don't want windows 8. I have heard nothing but bad about it!
Nope, though it did allow me to get some missing songs back onto my iPod. That's something. But neither "Back in Black" or "Dirty Deeds" show up anywhere on the Touch. Could this be because iTunes has no deal with AC/DC?
Quite frankly, at this point, I'd really rather not have the "ease of use" of iCloud attached to the iPod. It's not like I change my playlists that much. It would just be nice to get what I want onto my MP3 player. Not sure which one it was: iCloud, Music Match or the Air Port but the only real result of all the $ I plunked down is seeing all of my Wife's 231 Christmas songs popping up on my laptop. Really don't want them here. She SURE AS **** is sick of seeing all of my stuff on her computer.
Thanks again.
B. -
I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?
So I tryed to download it on the apple website but it keeps saying that there is an error.
What does the error message say? (Precise text, please.) -
I transfered music from my ipod to a new itunes library (new PC). The music plays in itunes but when I sync my ipod and try to drag songs from the itunes library to the ipod it wont load. It shows a circle with aline through it.
Have you selected manually manage music?
-
My circa 2007 iMac freezes up, and rainbow wheel appears when this happens. I know the computer is starting to get old but I can't afford a new one at this time and would love to continue using my Mac, but it's frustrating. Most of the time I ONLY have 1 thing open at a time, and keep my tabs down to a minimum. I bought this to do film editing on but with it acting like this I cannot do that. I know I need a ram upgrade (currently running 2 gb) and my OS is old, 10.5.8, but I think even with it being a bit outdated it should run better than this. Would a fresh install or OS upgrade resolve this? Or any other suggestions to keep this clunker chugging along for a little while longer?
How full is the hard drive?
Do you run any virus software or hard drive "cleaner" software like MacKeeper?
If your model is from 2007 you can install up to 6 GBs of RAM.
2 GBs is the barest of minimum RAM for OS X to run on.
Especially if doing video work. You simply do not have sufficient RAM.
Also OS X 10.5.8 Leopard support ended around 2009.
You could update to OS X 10.6 Snow Leopard, at least.
It is available on disc from the Apple store for U.S. $19.99.
I Would seriously upgrade your iMac's RAM to the max. 6 GBs before doing this.
Reliable Mac RAM can be purchase from online Mac RAM source Crucial memory or OWC ( also known as macsales). -
Hi guys well huge issue my Ipod 4th generation shuffle died and I tried to chrge it I plugged it into the USB port and the red light came on and after 5seconds turned off the whole Ipod is dead and I've tried in wall chargers as well that doesn't charge what should I do is there a solution or should I claim my warrenty and have it fixed??
Also my Itunes and computer won'r reconize it
Maybe you are looking for
-
How to get the output format options of SAP QUERY
Hi Gurus, I want to get the output options available for sapquery program.means when you execute the program "AQZZ/SAPQUERY/FDF1============" you will get output options like sap alv,display as table,wordprocessing etc. i am not able to unsderstand
-
Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506
Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that
-
What is the difference between iPad 3 and macbook pro
I was going to buy an ipad 3 o macbook pro but Im not sure if I should send extra and get a macbook pro or get and ipad 3 which does just about everything I want to do
-
HT5934 Hi I am using iPhone 5 and not able to download ios7 update kindly help me in this regards
Ho am using I phone 5. Not able to upgrade it to ios7
-
Does SimpleDateFormat still have Thread Safety Issue in jdk 1.4.2_8?
Hi, We are using jdk1.4.2_08 and experience following error message intermittently, sometimes once in 5000 or 10000 or 2/3 times in 20000 message processing. On one occassion, it reported as Empty String and other time it reported as ".20042005E20042