Hi there Gurus having problem with customizing CA51
hi there Gurus,
i was required to customize the CA51 program .
i try to copy the program , but i'm facing alot of errors.
(customized)
Program ZRCPDRK00
Field "PN_PLNTY" is unknown. It is neither in one of the specified
tables nor defined by a "DATA" statement.
the actual program is RCPDRK00 looks fine,
please advice me regarding this,
i even try to define the pn_plnty in the data statement, but still encounter this error.
please give me some solutions.
thank you
Look in the MIDI event list (key: E) for volume messages (control nr 7) and delete those. If it keeps happening after that, unplug your MIDI controller(s). Chances are there's a wonky volume slider on it that sends a MIDI message any time you hit your keys vigorously...
Similar Messages
-
Is there anyone having problem with Clone Stamp in CS4?
Good Morning, I am using Photoshop CS4 Extended with Windows Vista Ultimate 64 bit. My computer is a Dell XPS 430, WITH 8GB of ram, 1.5TB of disk space, ATI Radean HD 4800 Series adapter with 512MB memory. When I bring up an image in Photoshop and click on Clone stamp I get the error message "could not use the clone stamp because of a program error." I can still use Clone Stamp, but with some wied reults. Sometime the middle of the brush turns bright white and do nothing. Again it will clone the item clicked on, but would move the spot being cloned. Other times when the brush is move from the spot being cloned it will clone other area without cliking on them.
I have uninstalled and reinstalled Photoshop 4 times. I have created a new account with administrative rights, which I unistalled and reinstalled Photoshop. Two of the times that I uninstalled Photoshop I also used the Photoshop script to make sure all of Photoshop were uninstalled. I have also cleaned the register of Photoshop before reinstalling Photoshop. Another item used to make sure there was no error with Vista was Windows cleanup installed tool.
Yesterday I checked my laptop and I am getting the same results as my PC. The most recent thing that has been updated on both the PC and Laptop was Windows updates and Camera Ram 5.4. Attached is a copy of a wierd result using clone tool. I just clicked on the image and the orange spot appeared. Is there anyone else who is having similar problems with Clone Stamp?Have you applied the Photoshop 11.0.1 Patch?
Have you updated the video drivers?
If that doesn't help, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.) -
JCheckBox as nodes in JTree having problems with custom renderer and editor
Ok, let me give some background. I have an XML document that I am parsing and reading in as a JTree. Works fine.
Next, I have overwritten the DefaultTreeCellEditor to return a JCheckBox and in this implementation of the getTreeCellEditorComponent(), I actually tell the node that he is selected. Works great.
Next, I have overwritten the DefaultTreeCellRenderer to return a JCheckBox and in the implementation of the getTreeCellEditorComponenet, I actually check to see if the Node is selected in the tree based upon the isSelected state of the actual Tree Node set in the tree cell editor, and if so, I set the JCheckBox to selected(true).Works Great.
Now, here is the issue. If a node in the tree is selected that contains children, then I want all of the children of that node to also be selected. However, when I select a node with children only the selected node is changed, and then a few moments later, the system repaints the entire tree and ALL nodes int the tree are set to a selected state. Strange? Yes. Any ideas?? WONDERFUL!! :)
Here is the TreeCellEditor code:
public Component getTreeCellEditorComponent(JTree tree,
Object value,
boolean isSelected,
boolean expanded,
boolean leaf,
int row)
elementCheckBox_ = new JCheckBox();
Component result = null;
System.out.println("isSelected? Editor = " + isSelected);
TreePath newPath = tree.getPathForRow(row);
System.out.println("value = " + value.getClass().toString());
if(value instanceof IMarketTreeNodeElement)
if(isSelected)
if(((IMarketTreeNodeElement)value).isSelected())
((IMarketTreeNodeElement)value).setSelected(false);
else
((IMarketTreeNodeElement)value).setSelected(true);
elementCheckBox_.setSelected(isSelected);
return elementCheckBox_;
Here is the TreeCellRenderer code:
public Component getTreeCellRendererComponent(JTree tree,
Object value,
boolean selected,
boolean expanded,
boolean leaf,
int row,
boolean hasFocus)
Color colSelBorderCol = UIManager.getColor
("Tree.selectionBorderColor");
selBorder_ = BorderFactory.createLineBorder(colSelBorderCol, 1);
normBorder_ = BorderFactory.createEmptyBorder(1,1,1,1);
elementCheckBox_.setText(value.toString());
if(selected)
elementCheckBox_.setSelected(selected);
elementCheckBox_.setForeground(Color.YELLOW);
elementCheckBox_.setBackground(Color.RED);
else
elementCheckBox_.setForeground(tree.getForeground());
elementCheckBox_.setBackground(tree.getBackground());
if (hasFocus)
elementCheckBox_.setBorder(selBorder_);
else
elementCheckBox_.setBorder(normBorder_);
return elementCheckBox_;
Here is the Node Code setting all child nodes to selected:
public void setSelected(boolean selected)
isSelected_ = selected;
if(isSelected_)
if((this.getTagName() == "MARKET") ||
(this.getTagName() == "TIER") &&
(this.getChildCount() != 0))
selectChildren(true);
else
if((this.getTagName() == "MARKET") ||
(this.getTagName() == "TIER") &&
(this.getChildCount() != 0))
selectChildren(false);
public boolean isSelected()
return isSelected_;
public void selectChildren(boolean selected)
int children = getChildCount();
for(int i = 0; i < children; i++)
IMarketTreeNodeElement elem = (IMarketTreeNodeElement)
this.getChildNodes().item(i);
isSelected_ = selected;
Thanks for any help! :-)I tried to run your sample code and it won't compile. The header files:
#include
#include
#include
#include
#include
do not exist on my install of MeasurementStudio. I am a bit suspicous that I don't have the latest and greatest (loading the dialong resouce gave version warnings). Here is one of my header file headers:
//==============================================================================
// Title : NiAxes3d.h
// Copyright : National Instruments 1999. All Rights Reserved.
// Purpose : Defines the CNiAxes3D class.
//==============================================================================
I
looked on your updates site and don't really see an update that applies to ComponentWorks or MeasurementStudio. My version per the MAX program for 3DControls is 3.5.549.
Do I need a newer version? What do I have to do to get the updated version? What does it cost?
Chuck -
Still having problems with custom ringtone
When I sync my iphone with PC to transfer my ringtone.m4r file, I get an error message in itunes "file was not transferred because it could not be found." All the preceding steps (setting up the file, AAC conversion, renaming, work ok. The file actually shows on my iPhone, and plays, but doesn't appear in the ringtones list anywhere.
I know. Alot of people think that 1.1.2 solved it. Looks like it didn't.
lenn -
I am having problems with the new itunes set up ........
when i plug in my iphone or ipod touch it shows in the top right hand corner of itunes
BUT when i click on the shown iphone/ipod the icon its no longer there, i was useing this fine yesterday and it was showing yesterday what is on this ipod and would allow me to add/remove music, but now this option is no longer availlable - i have added a couple of albums to my itunes i can listen to the music from the laptop but cannot sync the ipods to trancefer these albums to the handheld devices -
i have been trying to sort this all day with no luck not sure if there is a problems with itunes or is it something i am doing ????
HELP !!!!!!!!!!!!BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect. -
I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?
I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?
It would always be easier to fix the Mail problems.
-
Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computerThe following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore. -
My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?
Try this for the freezing
http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
Or if they don't work put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414 -
Hello,
I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
Please heLp.
Thank you.Repair your Apple Sofyware update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install -
Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please
" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod. -
I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanksHi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena -
Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'
Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!
-
Having problem with i Pad sync getting pop up message as below. The i Pad cannot be synced because there is not enough space to hold all of the items in the iTunes library (additional 10.03 GB required). There is enough space be it in PC or on i Pad. Why and What can be done to resolve, please advice appreciate. Thanks
It generally means - just using random numbers for examples - the iTunes on your computer holds 45 gig of content, you have a 16 gig iPad which has 13 gig of free space and the content just won't fit.
Easy solutions. go into iTunes and 'manually manage' your content. I believe this is in the main summary tab for your device (connect your device, click on the icon in iTunes to access controls for your iPad
You may also need to choose to manually control content in both the music and movie tabs.
Apple - Support - Manuals
the manual will have more specific info for syncing and controlling content -
I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,
Think you need to provide some more details about what you are connecting
-
I have an Imac operating system 10.4.1 and Apple Works 6 and am having problems with Aplle Works 6. It shuts down before I am finished. Is there a place I can download Apple Works 6 onto my computer free?
AppleWorks has never been available for legal download.
Have you done the usual trouble shooting steps:
Quit AppleWorks
Delete most or all of the Recent Items list.
Remove the Preferences files to the Desktop or to the Trash.
Launch AppleWorks to see if the problems remain.
You'll find Recent Items in:
username > Documents > AppleWorks User Documents > Starting Points > Recent Items
There are several preferences files.
Go to:
username > Library > Preferences
Locate, select and delete the file com.apple.appleworks.plist
Still in the Preferences floder, locate and open the folder AppleWorks.
Select and delete the two Cache files and the Preferences file.
Button Bars is also a preferences file, but may be left where it is IF you have no problems that appear related to the Button Bar, and wish to preserve any changes you've made to the Button Bar.
Regards,
Barry
Maybe you are looking for
-
How many calendars can you share with the same iCloud person?
OK Apple people, here is my concern: I have several calendars in my iCal app. I can share one (home) with my wife but for some reason, I am not able to add her to another calendar that I wish for her to view/edit (work). She does have an iCloud ac
-
Can't send multiple photos in MMS
If I select a photo and choose to send via MMS then tap the camera icon next to the photo on the MMS screen (in order to choose an additional photo to send), the app sends me back to the Home screen. Also tried this on my 3GS running iOS4 and the sam
-
Printing with SMC4007ABR Print Server to PostScript Printer
I've just set up my Mac Mini in a new network configuration, with an old SMC4007ABR router/print server printing to my Ricoh Laser AP2100 printer, using IPP printing and the configuration for a Generic PostScript printer, which had worked for this pr
-
ABAP Proxy not generate in QAS
Hi All, I´m with problem in Abap Proxy objects, I developer and transported to QAS environment but has not generate in QAS. I checked this objects in environment QAS and all were transported. When I go to transaction SPROXY, it´s with not generate. C
-
Finder Crashing AFTER installing Stuffit Deluxe 11.0.2
There appears to be a bug in the version of the contextual menu plug-in that was installed with Stuffit Deluxe 11.0.2 the finder crashes regularly when you right click on the desktop or on an icon. The problem is reproductible every time you right-cl