Hi there I have a question I have bought a mixing console

Hi there I have a question I have bought a mixing console
From Yamaha
It’s the MG 166cx USB
I have connected it to my Mac book pro
And I am getting very little sound coming back from it into the mixing board
I have already messed around with a lot of volumes
And it keeps coming in into the mixing board very low
All I am using to listen to is the head set that is plugged in to the mic jack on the mixing board I think I am going to eliminate this mixing board or something because I am already getting fed up with it any comments?

You might get better answers by posting our question on the MacBook forum as your question seems to have nothing to do with iPods.
You might also see if the manufacturer has a support forum.
Best of luck.

Similar Messages

  • HT6154 Hi there, i have bought a iphone 4 from graiglist , and when i turned the phone on , its asking for the Apple ID for the previous owner which i do not have, but i have my own apple ID . WHAT CAN I DO TO SOLVE THE ISSUE. YOUR HELP PLEASE

    **** there,

    If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • Hi there I have an iPhone 4S on the 3 network that will allow me to tether my iPhone 4S to the ps3, my question is will I be able to access the playstation network on the playstation 3 to download games and content to my ps3 console

    Hi there I have an iPhone 4S on the 3 network that will allow me to tether my iPhone 4S to the ps3, my question is will I be able to access the playstation network on the playstation 3 to download games and content to my ps3 console

    If you're getting normal network access through tethering, I'm not sure why this would not work.
    - JC

  • I can no longer receive e-mail messages through my @mac/@me account. I can still send e-mail messages, though. I believe there may have been recent attempts to hack into my account. I have changed my password, but wonder how to start receiving mail again?

    I can no longer receive e-mail messages through my @mac/@me account, though I still seem to be able to send messages. I believe there may have been recent attempts to hack into my Mail account (my LinkedIn and Facebook accounts were both hacked three days ago and a scam/phishing message sent to my contacts, and I know there was at least an attempt made to hack into one of my e-mail accounts). I have already changed my Apple password, but how do I start receiving mail again?
    (And I should also say that I'm a little surprised there was no alert from Apple of suspicious activity on my account, if such was the case. Instead, when I logged into my account via Mobile Me three days ago I noticed that all messages in my inbox were gone as well as all of my contacts. I assume this was related to the current problem.)
    Thanks for all responses.

    The problem has been solved with the help of a MobileMe online counsellor. My MobileMe account had in fact been hacked into and the fraudster had been redirecting my e-mail messages to a phony account that he controlled. We took the forward off and reset all my passwords and security questions, which solved the immediate problem.
    Thx.

  • I want to create a Pdf file - do i misunderstand the product?  I thought i could create a PDF similar to excel or word file or do i have to create there and convert to PDF? I bought the pack for $89.PDF Pack!

    I want to create a Pdf file - do i misunderstand the product?  I thought i could create a PDF similar to excel or word file or do i have to create there and convert to PDF? I bought the pack for $89.PDF Pack!

    Hi Brian,
    You can create it in Word or excel and then you can Convert it into .pdf Format
    Here's a feature list that depicts benefits of PDF pack: Convert Word to PDF, Convert PDF to Word & Merge PDFs | Adobe PDF Pack
    Please revert back if you have any other questions or need any help.
    Regards,
    Rahul

  • Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

    I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
    It is a brand new iMac and running Lion OSX
    Any ideas on how to solve would be gratefully received?

    Followed the directions on this page and it worked!
    http://forums.macrumors.com/showthread.php?t=1102423
    Part One - Turn on SSH (in the admin panel)
    [1] Go to to http://mybookworld.local
    [2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
    [3] Switch to advanced mode.
    [4] From the System tab, pick Advanced.
    [5] Enable SSH Access, and click submit.
    [6] Click on the network tab and then the LAN button
    [7] Make a note of the IP address
    Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
    Part Two - Install netatalk2.2
    [8] Open Terminal.app (Utilities > Terminal)
    [9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
    Code: 
    ssh [email protected]
    [10] When prompted, enter the ssh password (will be welc0me).
    [11] You are now going to download the installer. Enter the following command, then hit return:
    Code: 
    wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
    [12] Once completed, you will need to run the installer. Type:
    Code: 
    sh install_netatalk.sh
    [13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
    [14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

  • Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    Question
    Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT1349 I have suddenly lost the whole of my iTunes library, with the exception of music that I have bought and downloaded from iTunes Store.  It was all there yesterday and I haven't altered anything, as far as I know!

    I have suddenly lost the whole of my iTunes library, with the exception of music that I have bought and downloaded from iTunes Store.  It was all there yesterday and I haven't altered anything, as far as I know!  I hope it's something quite simple?
    Apologies, but none of the communities listed seems to fit this question - so I'm taking pot luck!

    For music that you've purchased from Apple that are on your iPhone you should be able to copy to your computer's iTunes via File > Transfer Purchases. Also if you are in the US then you should be able to re-download past music purchases for free : http://support.apple.com/kb/HT2519
    For your own music that you've copied, then if you haven't got a backup on, for example, external drives or CDs/DVDs then you could see if any of the utilities mentioned in this old post still exist and work

  • TS1424 I have bought a book from iBook and even though my gredit card was charged immediately and the book was downloaded the first 12 chapters are not there! It says there is an error ... and the book starts at chapter 13. What do I do? Where do I compla

    I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?

    I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?

  • In Lion, sometimes clicking on close button or tabs doesn't respond as if the buttons aren't there, i have to move the cursor away and move back to make them work again, anyone can help me?

    I'm not sure if anyone had run into this issue. Clicking the same place on the display sevral times will cause the click to stop working. For example, if i open safari and click on the Show Reading List button, it will work the first time i click it, but stop responding to my command as i click more, as if the button is not there, i have to move away the cursor and click somewhere else and move back to click the button to make it work again. And it happened everywhere, not just the show reading list button. The scrolling and moving are normal.
    In fact, I have my trackpad replaced in an apple store for this issue but it turned out this is not a hardware problem, and it is not only my problem. Ironically, i found the same issue on several of the demo Macs inside the apple store. So anyone can help me here? Thanks.

    Hi manni394, what version of Firefox are you running now?
    Firefox 22 has a new way of setting the default zoom level: it is based on your Windows font size setting. So, if you set Windows fonts to 125% (enlarged 25%), your Firefox pages also will be enlarged 25%. On pages that do not adjust their layout, you may get a horizontal scroll bar.
    To reduce the zoom on a page, hold Ctrl and tap the - key (the one on the numeric keypad or the one on the number row of the keyboard). The zoom should be reduced for each tap.
    If you want to globally adjust your zoom level to be lower, you can use either of these add-ons:
    * [https://addons.mozilla.org/firefox/addon/default-fullzoom-level/ Default FullZoom Level]
    * [https://addons.mozilla.org/firefox/addon/nosquint/ NoSquint]
    If you already have one of those add-ons, check the default/global zoom level in case it needs to be adjusted.

  • HI THERE I HAVE TO I PODS WITCH WERE GIVE TO ME FROM A FAMILY MEMBER CAN I SET THEM UP FOR AN ACCOUNT FOR ME BUT I DONT HAVE THE OLD ACCOUNT DETAILS

    hello there i have been givin a i pod classic from my brother and want to know can i set up a apple acount even if i dont have his account details

    The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.

  • I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

    I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
    Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
    Thank you a lot in advance.

    I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes:  Latest software versions of everything.  No iPad, iPhone or Touch.  Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this.  The MacBook streaming iTunes is usually 12 feet from AX.  I've used this setup for years of trouble-free AirTunes / Airplay until today.  Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped:  Turned off IPV6.  Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX).  Turned off 'Ask to Join new (WiFi) Networks'.  Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it).  Here's my discoveries:  Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.)  iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts.  So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing).  Lo and behold, the dropouts stopped altogether.  No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED.  That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan.  Works for me, written using Chrome.  The other reliable fix is to hardwire MacBook to the Switch.  This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet.  Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

  • Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried r

    Hi, my iPad dies in the middle of a purchase for a game add on, when I charged the iPad and reloaded the game a box is on the screen that says " cannot complete your purchase" I can't slope this box, and cat play the game while it is there, I have tried removing the game several times and reinstalling but the box still appears, I even tried installing the game on a different apple I'd, and still the box is there, do you k ow how to fix this?

    Hi Bev076,
    I would try these ideas first:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that doesn't resolve the situation, I would suggest reporting it:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Take care,
    - Ari

  • HT4972 Hello there, i have an i Phone 3GS which was locked on the network Orange from U.K i finished the contract last year, but some how i cant unlock it to be able to use on a different network. tried to restore it on itunes but it says unable to proces

    Hello there, i have an i Phone 3GS which was locked on the network Orange from U.K i finished the contract last year, but some how i cant unlock it to be able to use on a different network. tried to restore it on itunes but it says unable to process at this time.

    under UK legislation, if your are out of contract (and not owing the carrier any debts!) they are LEGALLY obliged to unlock you, and within a certain number of (few) days.. search OFCOM for the regulations.
    That said, they are also entittled to charge you for this (usually about £20!)
    I believe, that this can also be done via an APPLE STORE, but the first option is always the Origional Network carrier.
    Orange has a terrible repuation now for customer service (which is just one reason they changed their name to EE!, and yes, this is fact which is why they came Bottom in several recent customer satisfaction surveys.. so they are not going to rush to help you leave them are they..)

Maybe you are looking for

  • A DNG File Processed by an Earlier Version of ACR--How to Re-Process in ACR 8.4

    I have thousands of DNG files processed by the ACR versions that came with CS4 and CS5. I was hoping to re-process some of them with the later ACR versions that came with CS6. But when I open a previously edited DNG file in ACR 8.4, it seems to rever

  • Using @Prompt in the SELECT clause (?)

    Post Author: faltinowski CA Forum: Semantic Layer and Data Connectivity Product:  Business Objects Version:  6.5 SP3  Patches Applied:  MHF11 and CHF48 Operating System(s):  Windows Database(s):  Oracle Error Messages:  "Parse failed: Exception: DBD,

  • Ebay shipping lable only part per page will print

    When I tyr to print ebay shipping labels only 1/4 of the lable prints to each page and I cannot correct the problem. My psc 1350v works perfect with my HP a305w Pacillion but it has a virus. I am using a Gateway and both are running Windoes XP. Can s

  • Can't auto-retrieve MMS with iOS 4.0.1

    My phone-number are provisioned for MMS and i can send without problems. But it refuses to auto-retrieve MMS. In stead i now get an SMS with info on how i can view the MMS "via web". Prior to my upgrade to 4.0.1 (directly from 3.(something)) it worke

  • ACE Appliance HTTP Probe with "POST" query

    Does the ACE support HTTP Probe with a "POST" query? Thanks Joe