Hi there, i lost the disk for installing wireless into my 6500a plus printer. how can install?

Hi there, i lost the installation disk for wireless on the 6500A plus all in one printer. And now that i upgraded my internet to wireless would like to do the same with the printer. How can i do this?? do i download something?? not very good with computer stuff.

Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

How do i install classic on my macbook if i lost the disk for it?

how do i install classic on my macbook if i lost the disk for it?

define "classic".

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

My Mac has lost the keyboard command to zoom in and out (Apple/shift/ /-) How can I restore this?

My Mac has lost the keyboard command to zoom in and out (Apple/shift/ /-) How can I restore this?

try doing an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
also go into your keyboard options and make sure the settings are correct there.

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

My start page does not have the otion for searching UK sites only, just worldwide search how can i get this?

As above
There are no separate buttons to click on just a global www search. How can i install the UK option?

Use this for the home page: http://www.google.co.uk/firefox

HT4623 The icons for my camera and facebook have disappeared. How can I get them back

I installed IOS6 recently on my IPhone and now my camera and facebook icons have disappeared. How can I get them back? Help!

For your camera, go to Settings>General>Restrictions and be sure that Camera is set to On. Don't know why you can't find FB, be sure you checked all your screens and inside all your folders.

HT201363 I need to get the answer for my questions to my rescue E-mail , how can i do that?

My appl ID got blocked , because i tried to answer the security questions and i fail to get the wright answer .

If you have a Mac or can have a friend do this for you, plug in the USB flash drive and burn the video files on it to a DVD (data) disk, which can then be placed in your HP computer. If this isn't an option for you, I'd recommend the "MacDrive 9" software. I have a much older version (5.0.8) of it on my HP P-4 tower running Windows XP. It works perfectly when reading Mac-formatted USB flash drives, as well as Mac-formatted CDs.

Hi guys , I have a problem , the place for my others is more than 2 G , how can I reduce it ?

hi ,
I have a problem with my iphone. I have a 8G and I have more others than any apps , audio , photos and whatevaer.I have about 2G of others on it.I deleted all my safari cache and data. How can I reduce it ?
Thanks!!!

This can indicate corrupt files. A restore should resolve.

I have cs4 installed on my old computer, i have since lost the disk and serial #s. Is there any way to recover this information and install the programs on my new computer?

I have cs4 installed on my old computer, i have since lost the disk and serial #s. Is there any way to recover this information and install the programs on my new computer? I used my old computer for college and haven't used it in awhile, now I have a job that can benefit from having those programs. I was wondering if ADOBE keeps records or something to where I can download the programs on my new MacBook and use my old serial #s.

Find your serial number quickly
Download CS4 products
Mylenium

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x.

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!

you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

I have an 06' macbook and I just bought an 07' macbook.. The 06' has os x 10.6 but the 07' has 10.5.. I no longer have the disk for snow leopard. Is there ANY way to get snow leopard from the old computer to the other without having to buy it again?

Technical issues aside, there's still a legal issue.
Neither 2006 nor 2007 MacBooks shipped with Snow Leopard 'factory' installed. OS X 10.6 Snow Leopard became available in September 2009. So you purchased and installed a Snow Leopard upgrade disc on the 2007 system at some point.
If your Snow Leopard upgrade was a single-user copy, then legally, you need to purchase another one for the second computer. If your Snow Leopard upgrade was a Family Pack 5-user license, then you're good to go.
http://store.apple.com/us/question/answers/product/MC574Z/A?pqid=QTUXD7AF4YU9FJD YUTDPCKYKUDDDXKHTK
If you have an active MobileMe account, Apple was giving away a single-user upgrade copy of Snow Leopard for a limited time, and you should have received an email with a link, or been offered the opportunity when you signed in to your MobileMe account on the web:
http://www.macrumors.com/2012/04/24/free-snow-leopard-discs-for-mobileme-users-n ow-arriving/
Worst case, single-user Snow Leopard upgrade discs are $29 retail, direct from Apple. I'd hate to have two computers and no OS installation CD's for whatever version I'm currently using.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

Hi there, i lost the disk for installing wireless into my 6500a plus printer. how can install?

Similar Messages

Maybe you are looking for