Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.
Similar Messages
-
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?
See "error -3259" here.
-
I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?
The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
My brand-new iPad Mini has Siri unresponsive. This happens quite frequently and I find it very frustrating. I have a strong Wi-Fi connection. Has anyone had this problem and fixed it?
Let me also say that this has been functioning this way out of the box...this is not new or a result of cookies or a full cache.
-
Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?
Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972] -
The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?
It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.
-
The audio is coming through my speakers fine, but there is no image of the TV Show or Film. Has anyone else had this issue and solved it?
I had the same thing recently when trying to play a video held in my itunes movies folder on my Macbook pro, through the Apple tv airlink to watch on my TV. I could hear the sound play back fine, but there was no picture/video.
It then dawned on me that the 'Apple tv' box can only show 720p resolution, and I was trying to play back a full hd (1080) video. I converted my footage to 720 (or apple tv version), and it now streams and plays perfectly from macbook to AppleTV. -
Mismatch query not working. Not sure what I did wrong.
In my query, I have created two CTE's. One pulls in the records of all people who are assigned to an audience. The other pulls in all people who are assigned to the same audience AND completed a certain course.
What I wanted to do from there, was to do a mismatch query, not to find the PEOPLE, but just the departments that were represented in the audience, but had no people in the list of those who completed the course. (In other words, say the HR Department had
three people in the audience... two completed the course, one did not. The HR Department should NOT show up in my mismatch query because some of their people completed the course. Then, say the IT Department had five people in the audience, and none of them
have completed the course. The IT Department SHOULD show up in my mismatch query. For this case, I don't care about the people who didn't complete it, just the departments where nobody did yet.)
I thought I was doing the mismatch query correctly, but I guess I must not. I will share the relevant parts of my query below (there is more to my query, but I don't think you necessarily need to see it to assist with this particular problem). (Side note:
Yes, I know the way I am doing the fiscal calendar is not ideal, but I've looked up other ways to do it, and do not understand it. Given time, I can break it down and understand it, but I am in a rush to finish this report.)
gm101certtbl
AS
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
dimActivity.ActivityName MeasureActName,
dimActivity.Code MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101CERT' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK INNER JOIN
factUserRequiredActivity ON factUserRequiredActivity.UserID = dimUser.ID INNER JOIN
dimActivity ON dimActivity.ID = factUserRequiredActivity.ActivityID INNER JOIN
dimRequirementStatus ON factUserRequiredActivity.ReqStatusID = dimRequirementStatus.ID LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
dimActivity.ActivityName = 'GM101 Program Completion'
AND
dimRequirementStatus.name = 'Satisfied'
AND
(audusersName = @audparam)
gm101availtbl
AS
select
dimUser.EmpFK MeasureEmpFK,
RIGHT(OrgCode2, LEN(OrgCode2) - 2) MeasurePC,
audusersName MeasureAudName,
Null MeasureActName,
Null MeasureActCode,
CASE
WHEN OrgCode2 LIKE 'US%' then 'US'
WHEN OrgCode2 LIKE 'CA%' then 'CA' END
CountryCode,
'ACTUALS_GM101' SOURCESYSTEMID,
Null CURRENCYCODE,
'GM101AVAIL' MEASUREID,
Null MEASUREDOLLARS,
CASE
WHEN GETDATE() Between '20131001 00:00:00' AND '20140930 11:59:59' THEN '2014'
WHEN GETDATE() Between '20141001 00:00:00' AND '20150930 11:59:59' THEN '2015'
WHEN GETDATE() Between '20151001 00:00:00' AND '20160930 11:59:59' THEN '2016'
WHEN GETDATE() Between '20161001 00:00:00' AND '20170930 11:59:59' THEN '2017' END
FiscalYear,
CASE
WHEN MONTH(GETDATE()) = '10' THEN '1'
WHEN MONTH(GETDATE()) = '11' THEN '2'
WHEN MONTH(GETDATE()) = '12' THEN '3'
WHEN MONTH(GETDATE()) = '1' THEN '4'
WHEN MONTH(GETDATE()) = '2' THEN '5'
WHEN MONTH(GETDATE()) = '3' THEN '6'
WHEN MONTH(GETDATE()) = '4' THEN '7'
WHEN MONTH(GETDATE()) = '5' THEN '8'
WHEN MONTH(GETDATE()) = '6' THEN '9'
WHEN MONTH(GETDATE()) = '7' THEN '10'
WHEN MONTH(GETDATE()) = '8' THEN '11'
WHEN MONTH(GETDATE()) = '9' THEN '12' END
FiscalMonthNbr
from
dimUser INNER JOIN
audusers ON audusers.DataSetUsers_EmpFK = dimUser.EmpFK INNER JOIN
Org ON dimUser.PrimaryDomFK = Org.Org_PK LEFT OUTER JOIN
UsrOrgs ON dimUser.ID = UsrOrgs.UserID LEFT OUTER JOIN
UsrDoms ON dimUser.ID = UsrDoms.UserID
WHERE
audusersName = @audparam
missingPC
AS
select distinct
NULL MeasureEmpFK,
gm101availtbl.MeasurePC,
gm101availtbl.MeasureAudName,
gm101availtbl.MeasureActName,
gm101availtbl.MeasureActCode,
gm101availtbl.CountryCode,
gm101availtbl.SOURCESYSTEMID,
gm101availtbl.CURRENCYCODE,
'GM101CERT' MEASUREID,
gm101availtbl.MEASUREDOLLARS,
gm101availtbl.FiscalYear,
gm101availtbl.FiscalMonthNbr
from
gm101availtbl LEFT OUTER JOIN
gm101certtbl on gm101certtbl.MeasurePC = gm101availtbl.MeasurePC
WHERE gm101certtbl.MeasurePC IS NULL
If anybody can help, I would greatly appreciate it. I'm trying to do this so I can pull these records into a final table to count the records from the other two, but then include these as a 0 count where these departments have nobody certified.
To test if this was working, I created a query using this Mismatch query instead as the main query. Instead, it seemed to give me the exact opposite. It seemed to be giving me all of the Departments (MeasurePC) where the records were represented.Please post DDL, so that people do not have to guess what the keys, constraints, Declarative Referential Integrity, data types, etc. in your schema are. Learn how to follow ISO-11179 data element naming conventions and formatting rules. Temporal data should
use ISO-8601 formats. Code should be in Standard SQL as much as possible and not local dialect.
This is minimal polite behavior on SQL forums. We have no sample data, so we cannot even guess.
>> In my query, I have created two CTE's. One pulls in the records [sic] of all people who are assigned to an audience. The other pulls in all people who are assigned to the same audience AND completed a certain course. <<
Please, please learn the basic terms. Rows are not records. And THEN learn what “redundancy” means so you will not write two CTEs in the future.
>> What I wanted to do from there, was to do a mismatch query, not to find the PEOPLE, but just the departments that were represented in the audience, but had no people in the list of those who completed the course. (In other words, say the HR Department
had three people in the audience... two completed the course, one did not. The HR Department should NOT show up in my mismatch query because some of their people completed the course. THEN, say the IT Department had five people in the audience, and none of
them have completed the course. The IT Department SHOULD show up in my mismatch query. For this case, I don't care about the people who didn't complete it, just the departments where nobody did yet.) <<
This is a Relational Division. It is one of Dr. Codd's original 8 operations.
We do not use the Sybase CURRENT_TIMESTAMP any more. We have DATE data types tody, rtoo. We never tibble in good code; it is a design flaw that used meta-data affixes like “tbl” in schema object _names, PK in column _names, etc. We do not have repeated groups
like “org_code_2”; we do not use arrays in RDBMS. Why is your data so screwed up you have use
CASE
WHEN org_code2 LIKE 'US%' THEN 'US'
WHEN org_code2 LIKE 'CA%' THEN 'CA' END
to clean it up in a query; the DDL should have prevented this problem.
Why are you doing calendar computing in your query? Where is the Calendar table?
“Users.id = UsrOrgs.user_id” says that you have magic, generic “id” that can change its name from table to table. Likewise, a generic, magic “code”, etc. What might be even worse is that totally different data elements have the same name! “Automobiles, squids
and Lady Gaga” programming is not RDBMS.
You have never heard of ISO-11179 and data modeling?
Here is a skeleton for fiscal calendar table to replace your current row by row temporal math:
CREATE TABLE Calendar
(cal_date DATE NOT NULL PRIMARY KEY,
fiscal_month CHAR(10) NOT NULL,
INSERT INTO Calendar
VALUES
('2014-10-01', '2015-01-00', ..),
('2014-09-30', '2015-12-00', ..),
You can use a spread sheet and a text edit to fill in the table for 50 or 100 years.
I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601 data format required by Standard SQL and it is
language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Why can I log into some sites or view them correctly in Safari
I have tried a few times to view the weather web site for one of my local stations, KOMO news. I can view this easily on my desktop computer, but a different version of the web page/site comes up on my IPod that does not have the same info, and there is no way of getting to the info I want to view (the 7-day forecast). What is this? And is there a way I can override what I'm seeing to view the web page I want to see?
Also, last night I tried logging into a few sites -- my web mail and utility bill pay -- with username and password, and instead of logging me in, the pages would keep "reverting" back to blank fields that I'd try again, and again (not even showing an error message, which is usually what I get if I enter wrong info.). It never worked, though it did work this morning from my desktop computer. Why won't Safari/Ipod let me log onto these sites?
Regards, DavidThanks for the advice everyone.
Working through them without much luck...
New user didn't help.
Have turned off MacScan.
No improvement as yet.
P.S. Not sure how MacScan and Virus Barrier X would interact as they seem to do different things... I got both of these as apps in bundles so didnt really specifically buy them.
I can't see any proxy setting in network preferences so will need to go into virus barrier and check.
Reading the "recommended text" on Virus's for homework.
Tomorrow it will be Appzapper for them both if the patient shows no sign of improvement. -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again. -
How do I get my iTunes back? I am new to iPad and hit something wrong.
The default apps cannot be removed.
Check all homescreens and folders to ensure it has not been moved.
Check Settings > General > Restrictions to ensure that the iTunes store has not been restricted.
If neither of those resolves, select Settings > General > Reset > Reset Home Screen Layout. -
I have no problem getting on the internet on my macbook but when I try the same network with the same password on my imac it says that the password is invalid. We have tried resetting the router. Resetting the PRAM, resetting the network to default settings. It happened yesterday and I haven't been able to figure anything out. Please help.
Try resetting your login keychain in keychain access. sounds like a keychain issue to me
-
Hello, I have Airport Express installed on my PC which runs XP. When I play my library through iTunes after about 2 hours Airport quits and I have to log out and restart my computer - very frustrating. Don't know if it is overheating but if anyone can make any suggestions it would be greatly appreciated.
Thanks
MurrayMaybe Mail's message index is corrupt. The following procedure is safe to try. Its only deleterious effect is that windows you left open in Mail at step 1 won't reopen automatically in step 4.
1. Quit Mail.
2. Browse to ~/Library/Mail.
3. Move "Envelope Index" to your desktop.
4. Launch Mail.
Mail will rebuild its index before it opens any windows. It may take a few minutes to rebuild. Be patient!
The new index is likely to be a different size than the old one, usually smaller.
Only the Message Viewer window will open--not any other windows you may have left open when Mail quit.
Be sure your mail folders are there and have their messages. They always are there, but the prudent check anyway.
Be sure you can send and receive mail. This always works, too.
After you have done the above, trash the old Envelope Index that you saved on your desktop. It is never better than the new one, and as time goes on, it becomes more and more out of synch with your mail folders, so you won't want to put it back in Library.
If Mail doesn't crash for a week or two, you probably fixed the problem. If not, you at least freed up some disk space.
Let us all know whether and how you solved your problem. -
I am unable to add Last Pass icon(link) to toolbar. Has anyone had this problem and/or resolved it?
I have tried to drag it to the toolbar without success. I want to use Firefox, but need my last pass available.
Hi,
Time Capsule doesn't support AirPlay (only the Airport Express), you might have mixed terms up! Do you mean the Airport Utility.app ?
If not try to see if the Airport Utility.app detects your Time Capsule, and troubleshoot the issue from this app.
If this doesn't work, try unplugging the Time Capsule and Plug it back in.
Maybe you are looking for
-
I dropped my iPhone on the ground, and as I went to pick it up, I started to swear under my breath as I realized my iPhone was in recovery mode. I'm like "how would an iPhone be this sensitive -_-," and so as my iPhone's docked unto my laptop, and wi
-
Collapsible panel problem in IE
Hi , I have a collapsible panel in a site I'm working on.the collapsible panel on display is closed. whe I open the page in IE8 it looks fine but once I click on the panel to open the content is show as it should and after a sec it drops down to the
-
How to add Material type(MTART) field on Selection screen of MB5B transaction code.
Hi All, Please let me know how to add material type field on selection screen of MB5B transaction For that i made copy ZMB5B_COPY of original report RM07MLBD. Thanks in adv . Samadhan
-
Nokia N8 camera "Unexpected error occurred"
Hello I am having a problem on my Nokia N8's camera. I take pictures but when I'm going to take video it is showing "Unexpected error occurred. Please restart the camera. If this does not help, try restarting the Phone." and black screen. Restarting
-
Trying to read multidevices in an array of tasks
Hi, Because of getting this error: "One or more devices do not support multidevice tasks.", I am trying to use an array of tasks to be able to read multiple devices, as suggested by GregFreeman in the following link: http://forums.ni.com/t5/LabVIEW/O