Hi ThereMy Sony dvd recorder has stopped working

Hi There
I have a Sony DVd recorder and Sony TV, both bought from Sony shop 5 years ago, so out of warranty.
last night, recorder stopped showing Title List/Guide, and eventually, no power light.
Have checked fuse, and ******ed new one, no luck.
Went to local tv shop, and he said 4 customers have called today with similat problem, any advice please.

I'm sorry to know your Sony DVD recorder is no longer working.
May I have the complete model number of your unit? You can get either from the front page of the manual or from the back of the player. (e.g., RDRGX255)

Similar Messages

What can I do about this message -"Toshiba DVD Player has stopped working"

Hi
My DVD Player used to work fine . . . and then I installed iTunes.
It then worked for a while, but only by using 'Run as Administrator'.
After a couple of weeks I started to get the message "Toshiba DVD Player has stopped working".
I have uninstalled iTunes - and uninstalled and then re-installed the DVD Player - but it still will not work!!
Any solutions please?
Thanks in advance for your help.
Ms Q_reeus

My solution to this is to remove Toshiba DVD player and install VLC player. You can get it for free.
It can read all video formats and you don't need some additional codecs.

Sound recorder has stopped working on mini 210-1040

Sound recorder has stopped working after a HP maintenance check

Hi
Try doing a system restore to the date where unit was working fine.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

My dvd drive has stopped working... put disk in...spits it out! Can anyone help?

My DVD drive has stopped working...put a disk in...spits it out. Can anyone help?

If you have a mid 2010 iMac, it is not PPC. PPC refers to pre-2006.
The 2010 is getting close to the age the PRAM battery might go, so that could be at issue.
The other issue is that the drive itself could only handle up to a certain speed DVD disc:
http://support.apple.com/kb/SP588
Slot-loading 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Writes DVD+R DL and DVD-R DL discs at up to 4x speed
Writes DVD-R and DVD+R discs at up to 8x speed
Writes DVD-RW discs at up to 6x speed and DVD+RW discs at up to 8x speed
Reads DVDs at up to 8x speed
Writes CD-R discs at up to 24x speed
Writes CD-RW discs at up to 16x speed
Reads CDs at up to 24x speed
If any are near the top end, that could explain it.
Some copy-protected commercial DVDs that were recently released may have difficulty with Apple's drives.
Some non-region discs may have difficulty if you are outside of the country region the disc was made. Apple gives you several attempts to setup regions.
If you or anyone else stuck an SD card in the CD drive by accident, it would spit out discs regardless of what kind you put in. Good to try a commercial music CD you know worked before, or a commercial DVD you know worked before under 10.6.8.
I know for instance some Netflix DVDs won't read on my 10.9 installed iMac of the same age but will work on the 10.7 installed MacBook Pro that is newer. And switching back to 10.6 on the same iMac doesn't make a difference.
http://www.macsales.com/ offers external drives as well as internal replacement drives worldwide.
Bluray is not compatible.
Discs with sticky label may not work because they make the disc out of balance, and the sticky can get into the drive mechanism.
Barring anything else, it could have gotten dust accumulated. Bring it to the genius bar of an Apple Store if still baffled.

Upgraded itunes now my dvd drive has stopped working

I recently updated itunes and now my dvd driver has stopped working. My computer won't even recognize my dvd drive. I have uninstalled and reinstalled and uninstalled itunes several times. I've tried system restore. I've even looked for an older version of itunes and no luck. I took it into Fry's electronics and they fixed it but when I hooked up my ipod it stopped working again. I don't know what to do. This is really frustrating and I am just tired of itunes messing with stuff and constatly crating new versions. I've read other threads and have tried some of the suggestions with the registration which didn't work.
Can you please help me.

You might get more help if you post your question in the correct forum.
This is the 'iTunes for Mac' forum and I can see from your post that you actually have a PC.
PC users will not really be reading this forum, which is the help you need.
Try posting your question here :-
http://discussions.apple.com/category.jspa?categoryID=150

My DVD drive has stopped working.

My DVD drive has stopped working. Any suggestions?

In what way stopped? Completely dead? Won't burn? ...?
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964
If completely dead, buy a new one.

Re: Portege R600-10Q- Toshiba DVD Player has stop working

Hello,
Please help me,
I can't use the Toshiba DVD Player, every time I open it, appears the windows windows saying that the app has stop working...
When I see the error report, appears 'app crash'....
I've already gone to the Toshiba site to make the bios upgrade and have made the download of a new version Toshiba DVD player and the problem remains the same...
What can I do?
Thansk and Best Regards,
Hugo Cunha

Try removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe
Failing that, I would backup the data and run recovery.

My DVD drive has stopped working. Where are the drivers for HP GH60L?

My DVD/CD drive has stopped working. Where are the drivers for HP GH60L? HP Pavilion Elite HPE-350T.

Hi,
Please try the following first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
It might be a huge coincidence but the drive was working fine before i installed lion?

Installing Lion would not cause the superdrive to stop working. Are you unsure as to whether or no a cd/dvd is inside? Something may be broken inside and you should consider bringing it in for service.

HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Voiceover recording in iMovie has stopped working.

My voiceover narration in iMovie 11 has stopped worked. It worked initially and then stopped working. I have tried headseat mike and internal mike and checked the audio setting when using them in voiceover. When i record narration, the audio is registering in the voice meter, the red progress bar passes over the part of the iMovie where I am recording. When I do playback, no voice.
Like I said this worked the frist time I used it, but has not worked since. Any ideas?
Lem

"If there any other tools people use to record voiceovers while being able to listen to the original audio?"
You could export your audio to an AIFF file and then bring that into GarageBand to add your voice over tracks.
iLife '06 makes the process even easier. You can actually see your movie play inside GarageBand.
I wouldn't buy iLife '06 today though, there's good reason to belive that iLife '07 may be announced at MacWorld.
Matt

Presenter video recording from PowerPoint has stopped working

My Adobe Presenter 9.02 Build 173 has suddenly developed a problem where recording video from within PowerPoint has stopped working. I have Office 2013 32-bit and Windows 8.1 64 bit. I believe that Presenter installed itself automatically in the installation process as a 64-bit application.
When I press the 'record now' icon on the Presenter toolbar, PowerPoint opens the current displayed in Slide Show view and I get the following error message:-
"Adobe presenter has encountered unexpected problem while working with this presentation......" etc.
This video recording feature from within PowerPoint has worked just fine on my system with the identical setup as mentioned in my opening paragraph but it's suddenly stopped working for some reason? I checked and do have the latest graphics driver.
The stand - alone video creator tool records video outside of PowerPoint just fine but as stated, I can’t execute recording from the ‘record’ icon on the Presenter menu in PowerPoint.
I tried the following without success:-
I created a new PowerPoint file and tried to repeat the recording process
I ran PowerPoint as Administrator and ran the file ‘Adobe-Pr-VC.exe’ (in C:\Program Files\Adobe) as Administrator
I uninstalled and re-installed Presenter
I turned off my AV software and firewall
I created a new Windows Administrator account and tried video recording within PowerPoint
Anyone have any ideas on what else I could try?
Peter

Solved! In the end, the solution was simple!
I went to the PowerPoint 2013 ribbon and clicked on 'Slide Show' and unchecked 'Use Presenter View' and video recording from within PowerPoint immediately started working fine. Previously, the 'Use Presenter View' box had a check mark in it. When you click on the record video button in Presenter, PowerPoint goes into slide show view and clearly Presenter doesn't like PowerPoint opening the Slide Show view in Presenter view.
I picked up on this from another PC I have with PowerPoint 2013 and Adobe Presenter 9. The video recording feature worked every time on that PC and I noticed that the only difference was that the newer PC had a check mark next to 'Use Presenter View' where as the older PC setup didn't.
So everything is working well now!

EZ Vinyl Converter problem transferring to iTunes - window appears "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again. I have now tried many times.

EZ Vinyl Converter problem transferring to iTunes - window appears "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again. I have now tried many times.
The deck is ION TTUSB05XL Laptop Asus V550C with Windows 8.
Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
JJR

EZ Vinyl Converter problem transferring to iTunes - window appears "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again. I have now tried many times.
The deck is ION TTUSB05XL Laptop Asus V550C with Windows 8.
Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
JJR

HT1349 So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

So everything on this page relates to Apple products. I am running a Sony laptop with Windows and as soon as I install iCloud desktop iTunes has stopped working. The only time I ever needed it. GREAT! Do you do this on purpose?

The latest version of iTunes tends to act up occassionaly. See this support document http://support.apple.com/kb/HT1923 and remove and reinstall iTunes. This will not affect your music library, apps or other content in iTunes. Make sure you follow the steps exactly.
Also, just copying the ringtone will not get it into your phone. iPhone ringtones have an extension of m4r, and you have to first take the Media player file and covert it to an AAC version. From there you need to change the extension from m4a to m4r. If you cannot see file extensions in Windows Explorer, which is actually the default action, go into Organize>Folder and search options, then hit the View tab, and then remove the checkmark by hide file extensions from known file types. After you have created the m4a version and changed the file extension, you can double-click on it and it should show up in the Tones folder in iTunes. From there, sync the phone and it should show up in the list of ringtones.

Hi ThereMy Sony dvd recorder has stopped working

Similar Messages

Maybe you are looking for