Hi this is how to get into your old partner jobs list

Hi there, I have worked out how to make the link to the old jobs in your partner portal work.
1. log into your partner site.
1. click on this link http://syd.worldsecuresystems.com/PartnerPortal/Support.aspx
1. log in to the new Adobe help screen that comes up. You will then be in the new help zone.
1. click on this link again http://syd.worldsecuresystems.com/PartnerPortal/Support.aspxand this time it will go to your old jobs list

When you are in Expanded View, the menu option that shows is "Switch to Basic View".
When you are in Basic View, the menu option that shows is "Switch to Expanded View".
It's not a deft bit of UI design, but it is foolproof.
Here -- from the User Manual.
To switch to the expanded metadata overlay view in the Browser in filmstrip view, grid view, and list view
Do one of the following:
Choose View > Metadata Display, then choose Switch to Expanded View from the Browser section of the submenu (or press Shift-U).
In the tool strip, choose Switch to Expanded View from the Browser section of the Metadata Overlays pop-up menu.
Note: Switching to the expanded view increases the number of columns displayed in list view.
To switch to the basic metadata overlay view in the Browser in filmstrip view, grid view, and list view
Do one of the following:
Choose View > Metadata Display, then choose Switch to Basic View from the Browser section of the submenu (or press Shift-U).
In the tool strip, choose Switch to Basic View from the Browser section of the Metadata Overlays pop-up menu.
Note: Switching to the basic view decreases the number of columns displayed in list view.

Similar Messages

How to get into your ipad if you forgot your password

How to get into your ipad mini if you forgot your password

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Java Printing Service (JPS) How to get printer status and pending jobs list

Hi,
I am trying to determine what is the current status of a printer in my computer as well as what is the list of pending printing jobs at any moment.
I want to monitor activity on a printer in my computer, so I can capture and log the jobs that are sent to my printer over time.
I would like to do so by monitoring the printer pending jobs list (if that can be retrieved through any java method) and make a log of changes in that list.
Any advice on how to get the list of pending jobs of a printer?
I checked the API and JobState class seems to be a descriptor of one single job... I suppose the method to retrieve a list of pending jobs in a printer would return an array of JobState objects... but I have not being able to find yet such method...
Thanks in advance,
JN

Moderator Action:
This post has been moved from the Java Programming,
to the ADF forum, for closer topic alignment.
*... and Comment:*
Get help from people that work with ADF.
They may have already done something like this.

How do you get into your iphone when it is closed

My iphone has been locked or something. Can you tell me how to get into it. In it, it says phone dissbled connect to itunes i have tried to go on itunes and have tried to find the solution but it is impossible to get in. If you have any idea what this means please write back and please tell me the solution.

If it's disabled because you entered the wrong password too many times, you'll need to back it up and restore it in iTunes on the last computer it was synced with. If you can't do that, see the other option listed at the bottom of this article: http://support.apple.com/kb/HT1212.

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?

UUpdate the new iphone to iOS 8.3 before you try to restore the backup.

How can you get into your ipod if you forgot the passcode

i have forgot how to get into my ipod so now its locked and i dont know to get in

Do as the manual says and restore.

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

How to get into my iPhone5 if I have forgotten my password, How to get into my iPhone5 if I have forgotten my password

How to get into my phone if I forgot my password

LOST PASSCODE
You should be able to remove the passcode by restoring the device.
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes", below.
Right-click the device in the left column and select Back up.
When the backup is complete, select Restore.
When finished, restore from your most recent backup.
Otherwise read this
If that doesn’t work you will need to perform a factory restore to remove it. Or read:
Enter Wrong passcode
http://support.apple.com/kb/ht1212

How to get on your ipad when it is disabled

how to get on your ipad when it is disabled

FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

How deactivate Web premium CS4 when I can't get into my old computer (crashed)?

Hi,
At Adobe's website it says:
"What happens if my computer is stolen or damaged and cannot be repaired?
If your computer is stolen, damaged beyond repair or the hard drive is completely re-imaged, the activation will be lost. In either case you can install and start using the Adobe product on your new computer, which will automatically detect the problem if you already had two computers activated. The activation process will guide you through the new activation, even if the prior computer is no longer available."
My computer has crashed but Adobe has not detected this, so I can't install my program on my new computer. What do I do?
Thank you for answering! :-)
//Milda

Hi!
There was no problem installing it on my new computor, but it says that i have to deactivate my earlier installation (within 30 days) since i have already installed it on two compters (i need to have the program on both my lap top and my stationary computer)
Milda
Skickat från min iPhone
7 jun 2012 kl. 14:07 skrev "Bob Levine" <[email protected]<mailto:[email protected]>>:
Re: How deactivate Web premium CS4 when I can't get into my old computer (crashed)?
created by Bob Levine<http://forums.adobe.com/people/BobLevine> in Creative Suites Windows - View the full discussion<http://forums.adobe.com/message/4472862#4472862

How to get into Z/OS

Gurus:
Your help is appreciated.
I try to log into a Z/OS and get message as follows. Please help tell how to get into the system? Thanks!
LOGON COREYZ
HCPLGA053E COREYZ not in CP directory
Enter one of the following commands:
   LOGON userid             (Example: LOGON VMUSER1)
   DIAL userid              (Example: DIAL VMUSER2)
   LOGOFF

Hi,
have a look at this site:
http://publib.boulder.ibm.com/infocenter/zvm/v5r3/index.jsp?topic=/com.ibm.zvm.v53.hcpw0/msgfrmt.htm
In this redbook http://www.redbooks.ibm.com/redbooks/pdfs/sg247603.pdf you can read this
For instance, CP issues the message shown in Example 8-1 when a user tried to
log on to a virtual machine that is not defined in z/VM.
Example 8-1 Error message when logging on to an undefined virtual machine
L LASMAYOU LASMAYOU
HCPLGA053E LASMAYOU not in CP directory
Enter one of the following commands:
LOGON userid (Example: LOGON VMUSER1)
DIAL userid (Example: DIAL VMUSER2)
MSG userid message (Example: MSG VMUSER2 GOOD MORNING)
LOGOFF
and this
Example 8-2 HCPLGA053E error message help
MSG HCPLGA053E All Help Information line 1 of 12
(c) Copyright IBM Corporation 1990, 2007
HCP053E (XAUTOLOG failed for userid:) <userid|value> not in CP directory
Explanation: The user ID supplied was not found in the z/VM directory. If the
command was an asynchronous XAUTOLOG, the message indicates which user ID did
not get logged on.
System Action: The command is not executed; system operation continues.
User Response: Reissue the command with a valid user ID.
* * End of File * * *
hth
Kay

I have forgotten my passcode but cannot restore factory settings as it says that I need to disable find my iphone but cannot do this as i cannot get into my itouch to disable it

i have forgotten my passcode but cannot restore factory settings as it says that I need to disable find my iphone but cannot do this as i cannot get into my itouch to disable it

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

How to get into BIOS in Windows 8

my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Quick doubt.. from cursor vairable how to get into page vairable

Hello
i am creating an apex page where i have 2 regions. From the Top region stores all fields entered into the bottom region
Text fields like first name and last name and address fields are in region 2(bottom).After region 2, i have a add person button.
Once i click add person, that person will get into top i.e region 1.
Now, Region 1 got person1 first name ,last name
person2, first name,last name
etc..
I am not able to display like p1_first_name,p1_laast_name as the list is not stable..it is growing and not showing the person who already got saved..I can retrieve them from DB using a cursor..But from cursor vairable how to get into page vairable..
appreciate ur help..
kp

Your explanation is not good enough. You have to make a better description of your problem or create an example at apex.oracle.com.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?

This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

Hi this is how to get into your old partner jobs list

Similar Messages

Maybe you are looking for