Hi to all please help me this also
How to upload purchase order data from legacy system using BDC?
Hi,
You can make use the BAPI, BAPI_PO_CREATE1 for creating the PO.
Pass the structures data for
POHEADER
POHEADERX
and table data for
POITEM
POITEMX
POSCHEDULE
POSCHEDULEX
Append the structure of the above mentioned and pass the same to the BAPI, Then you can able to create the PO.
Otherwise you can use the recoding method for uploading the data that comes from Legacy system. Use the SHDB tcode for uploading the data.
Regards,
Uday
Similar Messages
-
Every time I sync my Iphone 5c(with ios 8) to Itunes, it 1. deletes all of my purchased music 2. deletes all of my album artwork 3. replaces all of my deleted songs. please help! this is driving me crazy! It syncs 100+ songs, when I only want to sync 1! I'm running Itunes 11.3.1.2
After having experienced similar problems and having it back to work, I have a few suggestions:
- Try to find out if the syncing stops at a particular track or song. That might - out of the blue - have gotten corrupted in one way or another. Since that song will not be on the iPod, iTunes will try over and over to put it on and crash in one way or another;
- reformat the iPod as described in the iTunes 9 crash-thread. It takes time (at first it seems to do nothing, but that is because the green bar is moving with very small steps);
HTH -
I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying
If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve -
what does hd macintosh full mean please help I am also getting an error message saying start up disk is full i need to free up some space how do i do this please?
Also, you may find this link of intereset and value...
http://macmost.com/what-to-do-when-your-hard-drive-is-full.html -
Hi. I have an iPhone 4s. The music doesn't play when I connect it to my car stereo. It used to play previously but stopped playing all of a sudden. My phone is getting charged when I cut it to the USB port. Please help with this. The iOS is 6.1.3.
Hello Priyanks,
I found an article with steps you can take to troubleshoot issues with an iPhone not connecting to your car stereo:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi All,
Could you help me on below process please.
Iam working with BI7.0. I have real time cube (daily sales) and user need to access and update/add records accordingly.
So for this real time cube I have to create planning layout with the data. User can see that data and update/add.
I dont how to create planning layout (i heared that rsplan) how to show the data.
Also I need some help on ABAP, I need to map some fields from a table.
Actually from a flat file iam uploading data into ODS. In ODS has 3 more extra infoObjects.
Ex: Shopping mall code, tenent number and outlet number info i have to pick contract number from table with routine and pass that contact number into ODS one field. It means Contact number will not come from flat file, thats what need table and routine.
So for that I have to create one table (SE11) with all the information. and i have write routine.
I have to read flat file 2 fields( like A and B) and check the value in a table and get the value C and put into ODS one field. I have to do this with routines.
In the table have A, B and C values. Table also I have to create. so also please can u tell me some steps.
Could you please help on this. Also with process chains for this.
Thanks in advance!
anilHi Anil,
If you go to RSPLAN there you can go to Portal link (it must be configured properly in system)
In portal there will be wizard where you can easily go step by step and create planning functions and sequences like below:
1. You choose the appropriate InfoProvider.
2. You create one or more aggregation levels.
3. You create one or more filters.
4. You create one or more planning functions.
5. You create a planning sequence.
6. You test the planning model.
which is clearly explained in below link
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d2440301a06f4e10000000a422035/frameset.htm
after doing this you can create a query on aggregates you have created above and then make query input ready i.e planning enabled for keyfigures you want like mentioned in below link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm
then you can run query in Analyzer and save it as a work book after proper drilldown which can be used as template.
Hope you understood basic thing, as you going on doing u will know clearly every thing.
Ravi -
SB Titanium HD + Logitech Z5500 No Sound at all, PLEASE HELP
SB Titanium HD + Logitech Z5500 No Sound at all, PLEASE HELP:Yesterday i replaced my SB X-Fi Titanium Fatalty Professional Serier 7. Sound Card which was working perfectly fine with the new Titanium HD, i did a fresh install of Windows 7 and deleted my partitions so started completely from scratch. Installed the drivers that it came with, had no sound at all. Updated the sound driver to the latest one 3.00.004 and still no sound. I'm using the optical cable for 5. as i have no choice so i thought as i wasn't using opitical before maybe it doesn't work but then when i uninstalled the creative drivers windows installed it's own driver and i all of a sudden had sound, but it must have been using the onboard sound on my motherboard. Then i tried installing the latest Creative driver first instead of the one from the CD provided and still no sound. I spent 6 hours trying everything i could think of, on Creative's website it mentioned trying to change the frequenzy sampling rate to match your speakers, well i went through all of them in the settings?and still no sound. I've even taken the sound card out and reinstalled it again, still no sound. I'm really lost and could appreciate some help. Do you think the sound card could be faulty?
In device Manager the sound card shows up so it is being reconised, also on the opitical at the back of the card it glows a red colour.
The specs of my machine are:
Windows 7 Home Premium (orignal not a copy!)
Gigabyte P67A-UD7
Intel i7 2600k 3.40Ghz
Corsair Vengeance 8GB DDR PC3-5000C9 866Mhz
ATI Radeon 6970
Also i've updated Windows 7, but to be honest i had no sound before the updates and no sound after installing all the updates and uninstalling the drivers and then reinstalling them. I feel like i'm a beaten man and it's so annoying, any advice PLEASE?Please ignore my post, sooooo embarrassing, user error (hands up). Nothing wrong with the hardware or drivers.
As i didn't have to do this before when i was using my Fatalty card without using optical i honestly didn't give it a second thought but i had to go to the encoder settings from the creative audio software and change to Dolby or DTS, it was switched off so i chose Dolby at first and then my Logictech Z5500 5.1 LCD Panel changed to the Dolby sign and then there was light (sound). I felt very stupid indeed.
However it would have been REALLY helpful if i could have spoken to someone in person, it took me 6 hours before another kind poster from another website told me where i was going wrong, Creative really need to have a technical support phone line as their knowledge base is VERY limited! -
When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.
Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error??? -
Just updated itunes 10.5 and now it won't open at all please help me
Just updated itunes 10.5 and now it won't open at all please help me
Already a thread about this problem. Check to see if any of the given solutons here work for you.
https://discussions.apple.com/thread/3381033?start=0&tstart=0 -
Please help with this part of error...
Hi all,
Please help me with this error. What i was trying to do is that when Server send a message to client, it print out on the screen what is sent to Client. For instance, if the Message is called FirstMessage sent to Client, the message FirstClient will display from server console with a specific message such as "First Message from server to client: first Message") and so on. I tried to implement the below code but when compiled it i got error message as follows :
C:\Java\bin>javac QuoteServer.java
QuoteServer.java:60: <identifier> expected
out.close();
^
QuoteServer.java:61: <identifier> expected
in.close();
^
QuoteServer.java:62: <identifier> expected
clientSocket.close();
^
QuoteServer.java:63: <identifier> expected
myserverSocket.close();
^
4 errors
Her is the Server side socket...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
System.err.println("Could not listen on port: 4998.");
System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
System.err.println("Accept failed.");
System.exit(1);
PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
BufferedReader in = new BufferedReader(
new InputStreamReader(
clientSocket.getInputStream()));
String inputLine, outputLine;
QuoteProtocol QP = new QuoteProtocol();
outputLine = QP.processInput(null);
Date current = new Date();
out.println(outputLine);
String ToClient;
while ((inputLine = in.readLine()) != null )
outputLine = QP.processInput(inputLine);
out.println(outputLine);
System.out.println(inputLine);
System.out.println(current.toString());
/* additional..if doesn't work delete this code*/
while ((ToClient = in.readLine()) != null)
System.out.println("Server: " + ToClient);
if (ToClient.equals("Bye."))
break;
/* delete up to break*/
if (outputLine.equals("Bye."))
break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Could someone with the expertise advise me what shall i do?
Thank you very much.
Audrea.Thanks for the quick reply...
Here is the code with correct open/close braces...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
System.err.println("Could not listen on port: 4998.");
System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
System.err.println("Accept failed.");
System.exit(1);
PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
BufferedReader in = new BufferedReader(
new InputStreamReader(
clientSocket.getInputStream()));
String inputLine, outputLine;
QuoteProtocol QP = new QuoteProtocol();
outputLine = QP.processInput(null);
Date current = new Date();
out.println(outputLine);
String ToClient;
while ((inputLine = in.readLine()) != null )
outputLine = QP.processInput(inputLine);
out.println(outputLine);
System.out.println(inputLine);
System.out.println(current.toString());
/* additional..if doesn't work delete this code*/
while ((ToClient = in.readLine()) != null)
System.out.println("Server: " + ToClient);
if (ToClient.equals("Bye."))
break;
/* delete up to break*/
if (outputLine.equals("Bye."))
break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Line 60 starting from out.close(); onwards.
Please help..
Thanks a lot.
Audrea. -
Hi. i updated my iphone 4s to iOS 7.0.4 but after that, wifi is not enabled. please help in this regard.
Apple has provided a useless workaround... [http://support.apple.com/kb/ts1559]
Else the only option you have is to fight with the Apple Store "geniuses" to get a free replacement for out of warranty 4S devices. Or try a third party repair like iFixit. The wifi chip might cost you 60-80$ but it is better than paying Apple 200$.
Overheating is the culprit in 4S devices. And its been getting worse with ever successive iOS 7 update. I think 7.0.4 was the final nail in the coffin.
They are not getting my money anymore.. I've had iPhones every since they launched... but no more. Feels like a dead investment after facing this issue. I can never sell my iPhone 4S even if I want to. There have been cases where users just sold their 4S devices, the new owner updated to 7.0.4, wifi stopped working and the seller had to give a refund.
I'm basically sitting on a 650$ white brick. Hmm... I wonder if white bricks sell higher than the standard red bricks
Guess it's time for you to sign up this ongoing campaign [https://www.change.org/petitions/apple-to-get-apple-to-replace-all-units-affecte d-negatively-by-the-update-of-ios7-or-patch-an-update-that-will-remedy-the-issue s-many-loyal-customers-are-experiencing#share]
TBH, I can't get a replacement because I am in India where 4S was never launched as an unlocked device and there are no Apple retail stores. Only resellers here like Vodafone/Reliance/Airtel. But if this petition can help the one who can take advantage of having retail stores around... why not? Sign up please. Thank You. -
My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!
Go step by step and test.
1. Restart
2. Shut down the computer.
Clean the trackpad with moist not wet microfiber cloth.
System Preferences > Point & Click
Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM: http://support.apple.com/kb/PH14222
5. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
Select Disk Utility from the drop down. When the Disk utility window opens up,
select Macintosh HD, then First Aid.
Click Repair Disk Permissions button.
Ignore the time remaining estimate.
Last 1 minute may take longer. -
search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
code. partner funtction - ZRG DATA :
DATA : lv_partner_fct type .
types: begin of ty_resp,
partner type but000-partner,
name_last type but000-name_last,
name_first type but000-name_first,
mc_name1 type but000-mc_name1,
mc_name2 type but000-mc_name2,
end of ty_resp.
DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
lw_resp_bp type ty_resp.
IF lv_attr_name = 'Rgroup'.
lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
IMPORTING ev_result = lv_low ).
IF lv_low IS INITIAL.
SELECT partner
name_last
name_first
mc_name1
mc_name2
FROM but000 INTO table lv_resp_bp
WHERE mc_name2 = lv_low and bu_group = '0010'.
loop at lv_resp_bp into lw_resp_bp.
lv_low = lw_resp_bp-mc_name2.
lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
iv_sign = lv_sign
iv_option = lv_option
iv_low = lv_low
iv_high = lv_high ).
ENDLOOP.
if lv_partner_fct = 'ZRG'.
lr_entity = lr_iterator->get_next( ).
CONTINUE.
ENDIF.
lv_attr_name = 'BU_PARTNER'.
ENDIF.<b>You can acheive this .... first by creating the search help exit ... by creating the maintaince view then using it in the Creation of the search help </b> ...
see the link for attaching the view to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish -
I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.
So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there? -
Hi Experts,
I have schema which has to be implemented in SAP BI 7.0.Schema contains one Fact Table & three Dimension tables.It is snowflake schema.
Assume Fact table as F & Dimension tables as D1,D2,D3.The Schema is as follows.
F---->D1--->D2---->D3
Now i have created navigation attribute from D1 to D2 & D2 to D3 Then i have created a infocube having facts & D1 attribute.
So when i drag the infoObject from D1 having navigation attributes to D2 & from D2 to D3 iam unable to get D3 information.
Please can any one suggest me how to get D3 level of information in report Or how to accesss the facts & D3 level information .
Please Help on this
Thanks & Regards
Sameer KhanHi Sameer,
Your question is not clear.
Regards,
Sagar
Maybe you are looking for
-
Char Set with Portuguese special characters
Hi all, it's kind of urgent. I need to create a new Output Device (SPAD transaction) with the device type ASCII. Until that, no problem, but I need this device type to allow printing special characters like Ç, ç, â, ä, º, ª, etc. Every special char i
-
Oracle 10G vs. Globus Toolkit
I'm confused. Most of the sales literature about 10G seems to be around load balancing on blade servers. I'd like to get the whole picture, not just this part. Could someone here tell me how Oracle 10G is different from, or supports, Ian Foster's Glo
-
Can I use the Run VI method on a Compact FieldPoint?
<double post> Message Edited by Synap on 03-30-2006 01:49 PM
-
I can already get all of the "Identity" object attributes, but how does one get the "Connection" object attributes? Specifically, I would like to get the poll input/output lengths so I can set up an I/O connection. It looks like SimpleWho can get th
-
I apoligize if this has been discussed before, but I didn't get any results when I did a search. When installing "install_flash_player_ax.exe" on several systems, I'm seeing an error/exit code of 1030, and am unsure as to what that error is. I've c