Hi, today I was making a FaceTime call when a friend of mine knocked my iPhone 4s onto the ground. The screen turned blue for ten seconds then the phone rebooted. What happened?
I haven't noticed anything wrong with the phone, I just want to know what happened and if I should do something about this.
After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743
Similar Messages
-
My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am up to date on the OS 7.1.1. Video and audio is froze on my end, only video freezes on the other end. It doesn't make a difference who makes the call either.
No, there isn't any setting that you are missing. Have you tried force closing FaceTime, and resetting your iPad?
In order to close FaceTime, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that does not make a difference, you could try resetting all settings, if you reset all settings you will have to enter all of the device preferences again in the settings app. That takes some time to accomplish, but you will not lose my data, media, apps or anything like that. Settings>General>Reset>Reset all settings.
If that doesn't help, the next step would be to restore the iOS software. Backup your iPad first, restore the iOS, then restore the backup.
Use iTunes to restore your iOS device to factory settings -
When you bring up the browser and type in Church of God's Messengers, it brings up the links. When you click on the links, it closes Firefox completely. When you bring back up Firefox it asks you if you want to restore the session. I never used to have problems accessing the site. What happened???!!!
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
How can I watch for an alarm, then wait to see what happens before the save?
I have resurrected an old project, thus using outdated software (LV6.0.2)... any help is awesome.
I am attempting to gather strain gage information on a piece of equipment. Ideally, when the strain gage level reaches a certain point, I would like to cause an alarm that alerts the user, gathers data for an additional xx seconds, then dumps all this information into a file. Thus saving the information leading up to the event, and the system response following.
Though I haven't figured out how to preset the file name, (working on that), my current hurdle is figuring out how to get LV to continue saving data after the initial alarm. I can dump the information directly to a file, but its the continuation that stumps me.
Any help is good help.
Thanx,
Paul>>If you don't mind, post a simplified version of your VI.
Due to my extensive self-taught knowledge of LV, simplified versions are all I can currently create. At the moment, I am trying to gather concepts for later final assembly, as I am an electrical engineering student working at an internship where I am the only EE on staff. Final Assembly date is early Sept.
How am I doing it?? Good question.. Still figuring that part out. Currently I acquire a sample of 83 points w/ rate at 5000. This was chosen as 1 complete cycle of 60Hz to remove unwanted noise. These 83 samples are put trough the 'mean' function, and scaled appropriately to allow accurate results from the 'Strain Conv' function, then processed to achieve accuracy in psi and sent to a chart for real time observations, and to a tunnel for indexing.
I would like to add an alarm to indicate when the output hits xxxx (roughly 15000), acquire an additional 10 seconds of information, then save this to a file.
Thus far I was planning on trying Sequence loops...
Frame 1: use a 'sequence local' to get the initial data to later frames, where the alarm would stop the first while loop.
Frame 2: continue sampling the data for xx seconds, send to another sequence local
Frame 3: gather both locals together, build new array, save this to a file... Hopefully with a time/date like stamp as a file name to allow it to run un-monitored for an extended period of time.
As this is a new venture, I have thus far not attempted frames 2 & 3 yet, working on that. I am guessing that the tick count you are referring to in your suggestion is from the iteration counter ('i' in a blue box), inside the while loop. I will work on that.
I also recently contacted CC for assistance creating a time/date stamp for the file name... do you think this could work? (didn't ask this specifically) and I still haven't figured out how to create a file path from this. (granted the whole file path thing is a mystery in general)
Plus.... when events happen, all data from the beginning of the aquisition run is saved, the longer the run, the longer the file. Is there a way to limit this to say.... the last 3000 samples? I think it would have something to do with creating an array xx long to start, then filling it, when the array is full the next point in the top will kick the last one out the bottom. (i think)
I have attached one of the most recent versions of my attempts, hopefully you can open it. Please note I am using LV6.0.2
Thank you sooo much for your help, (this is meant for EVERYONE). I feel lost. Everyone's direction and responses in all areas has been invaluable. Though I wish more would post in neutral formats, as there are many vi's I would like to glance at that I cannot due to version gaps.
Attachments:
stress test (wavveform capture).vi 48 KB -
Just as the question asks.
Sorry, I did not that it was stolen until I bough it, than I actually told him I did not want it than and he told me that I would not get the money, and I went oh well .
I am going to give it back despite the fact I lost the money, I would not my iTouch to be stolen ever!
Thank You!
Last month though, I bought an iTouch, and during one of my classes someone stole it from my backpack, I know it. I do not know anyone who it might have been. No camera evidence either. I am wondering is their a way that I can track it. I checked the "Track my iPhone" but I think the person might have rest it to factory settings. Can they be traced in any way?
Is getting teh police worth it? -
i bought my daughters ipod shuffle 4th gen last week for xmas. set them all up easily etc and wrapped them for xmas. kids opened them up for xmas played them most of the day so i thought i would charge them both overnight on the computer. pc went into sleep mode which i didnt realise wouldnt charge them. so in the morning they were flat so i charged them on the pc but 1 didnt seem to take any charge while the other worked perfectly. treid to charge it all night long last night using a power point charger and still this morning it displays the red light and wont show up in itunes or my computer. apple support havent rang me yet
Make an appointment at an Apple store if there is one nearby.
-
I have no idea what my pocket has apparently downloaded today while I was at work but I now can't here any tones on my iPhone 4...has this happened to anyone ive tried restarting it and it worked for a second then a thing popped up on my screen and nothing again
Ok mate no need to talk to me like im a complete idiot, and no it is not on silent im not that stupid. There is a message pop up on my screen saying 'this accessory is not optimized for this iPhone' and underneith 'you may experience noise caused by cellular interference and a decrease in cellular signal strength' and under that only one option to press which says dismiss. I cant find anything in my settings or applications and have tried resetting my phone 3 times and still nothing only plays ringtones ever now and then wont play music from ipod, youtube or other applications.
-
Why apple was not update facetime call over the cellular for iPhone 4?????
why apple was not update facetime call over the cellular for iPhone 4?????
Facetime will not use the cellular network (if using AT&T) for the iphone 4, 4S or 5 unless you have signed up for ATT's new data share plan. They stated this several weeks ago when there was talk about Iphone5/IOS 6 and Facetime. Your carrier is the one that decides if Facetime will work over the cellular network or not. You might want to contact them. Your other option is to continue using it via wi-fi.
-
Ipod touch won't ring receiving FaceTime call when in standby
I am trying to FaceTime one touch from another. If the one receiving the 'call' is in standby it will not ring. If I take it out of standby or disable locking then it rings normally. I am assuming this is because it loses the wifi connection when sleeping? Is there a way to keep it connected? Is there a way to receive FaceTime calls when in standby mode?
mjl4321 wrote:
I am trying to FaceTime one touch from another. If the one receiving the 'call' is in standby it will not ring. If I take it out of standby or disable locking then it rings normally. I am assuming this is because it loses the wifi connection when sleeping? Is there a way to keep it connected? Is there a way to receive FaceTime calls when in standby mode?
Welcome to Discussions, mjl4321
My iPod touch rings and displays the incoming FaceTime screen from sleep. Yours should, too.
Here are some things you can consider:
• If you are using both on the same LAN, try moving one to another wi-fi location. Some users report problems when using more than one FaceTime device simultaneously on the same LAN.
• If you have multiple devices on your network, check with your ISP for this possibility:
http://support.apple.com/kb/HT2460
• Might you merely not be hearing the call? I changed my ringtone to a louder sound and turned the ringer volume to maximum so my partially deaf ears could hear the call if I happened not to be looking directly at my iPod when a FaceTime request was received.
• Do you have a solid wi-fi connection with minimal interference? I occasionally need to refresh my wi-fi connection. In my case, I think this is due to interference from my nearby neighbors, but interference can be caused by portable phones, microwave ovens, and a variety of other electrical sources:
http://support.apple.com/kb/HT1365
To refresh, turn Settings > Airplane Mode ON and then immediately back OFF.
Of course, if you lose wi-fi while your iPod is sleeping, you will not know when you need to reset. However, if connected apps ever stop working while you are using them, this may be your problem during sleep, too. You can try the suggestions in the link above to see if you can eliminate the problem.
• If nothing works for you, ask your retailer or Apple Authorized Service Provider to check whether your iPod may need service.
BTW, your posted system info shows "new ipod touch iOS 4". If this is correct, you should update to iOS 4.1. If it is wrong, you can correct the info in the "My Settings" link in the upper right part of the page whenever you are logged into Discussions.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1 -
With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Yesterday after upgrading the Cisco AnyConnect app, it stopped working; Today, the app is not available anymore from the apple store, what happened?
There is an explanation in the following link in the section "What's new in version 3.0.09440" that there was a problem with the update. It's available again now. https://itunes.apple.com/us/app/cisco-anyconnect/id392790924?mt=8
-
Hello guys!! I have a problem with my old mac book. Today when I am switch on one white screen appears and after seconds this white screen continue with one interrogation mark!! Someone knows whats happen?? It does not starts !! I have a feel of work inside and I am afraid!! someone may help me??
your English was quite good enough to tell us that you saw this
Niel has advised you well.
If you have a more complicated problem, you can write in your language. Most all of us can translate with Google very easily... see
Español
Si usted tiene un problema más complicado, se puede escribir en su idioma. La mayoría de todos nosotros puede traducir con Google muy fácilmente ... ver
Português
Se você tem um problema mais complicado, você pode escrever no seu idioma. A maioria de todos nós pode traduzir com Google com muita facilidade ... ver
buenos tardes
ÇÇÇ -
I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?
What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action. -
My ipod froze so I restarted it, but then it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then disappears, it doesn't turn on or come up with the charging sign. Is it not going to work again, or is ther something I can do? Please help.
I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance -
Hi apple. in the Keynotes about the new iphone you say..
1:28 p.m.
Wi-Fi calling is a new feature for making high-quality calls when cell conditions are poor.
The question is Work That? i no see the change for me POOR signal here on my office..
my carrier att. have very Poor Signal here on Aguadilla PR.. i take this PHone for this keynotes about the wifi calling is a new feature...
please i need a new respont.. and check the security about iphone Someone call reply the text messenger from the Block area.It sounds as if you only had one line with an upgrade available. So you can only upgrade one line. For you to upgrade as well, you will have to wait until your upgrade is available. You can check that at MyVerizon. That's just how it works. All carriers and phone brands are the same. I have to wait until February to upgrade. The only thing you can do to get the new iPhone, is add a new line. But then you're paying for a line you don't need.
Maybe you are looking for
-
[nForce] Lets solve this 1394 problem once and for all.
Hi guys, For the past 3months I have been trying to connect my Panasonic GS150 to my comuter in order to use Avid dvxpress pro. I have the problem of when I connect the camera to the computer, nothing happens. I also have this problem with my Ip
-
Bridge CS6 freezing on OSX 10.8.2 (Mountain Lion)
I am entering this because it is solved and may help others... Model Name: iMac Model Identifier: iMac10,1 late 2009 Processor Name: Intel Core 2 Duo Memory: 12 GB Apple SW OSX 10.8.2 Adobe SW PS CS6, Bridge CS6 Recurring and repeatable problem
-
HT201209 How can my balance be lower that the amount of the card?
I just redeemed a $10 Itunes GC but it says my balance is $7.42. How can I have less than the $10 I just redeemed????
-
I must parse an xml file(quite large) and there is an "<" character inside of an attribute name (instead of "& lt"). Of course it appears an SAXParseException and the program stops; the attribute name is not important for me (for example I could igno
-
How do you fix a disabled ipod
how do you fix a disabled ipod