Hi. trying bootcamp macbook pro but only get Virtual PCOS Services?? thanks if U can help.?
hi trying to load windows 7 on macbok pro, with usb 3.0 having problems, only get 'virtual pcos service' message. thanks if you can help ?
Boot Camp forum:
https://discussions.apple.com/community/windows_software/boot_camp
Similar Messages
-
Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?
Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program -
Hi! I've got CS3 Design Standard - the actual disks and Software License certificate. It was installed on my laptop which crashed and could therefore not be uninstalled. I have now installed it on my new MacBook Pro, but cannot get it registered with the serial number. Is it because it wasn't uninstalled on the previous laptop? What to do now?? Thx!
Maybe this can help someone else... I simply had to properly uninstall CS3 and reinstall it again after that. I think that sorted it! I also remember having a similar issue with Macs at work a couple of years back. Not sure whether the same applies to CS5/CS6. Here's a link on how to properly uninstall CS3 on Windows XP, Windows Vista and Mac OS. I'm on OS X 10.9.2 but it worked just fine. Remove Creative Suite 3 and CS3 products
-
I purchased a Seagate 3T HD for my MacBook Pro but only Windows are listed on the box (the Seagate site listed Mac) will it work???
Most external drives are formatted for Windows; you should be able to format it for Mac. Plug it in, open Disk utility, highlight the drive and choose the Partition tab. Do not worry about any software on the drive - you don't need it and it will be erased. In the partition tab, choose how many you want, name them, choose Mac OS Extended (Journaled) and, under the Options button, choose GUID partition scheme. Hit Apply. The drive will be erased and formatted. If that process does not work, contact Seagate and inquire about the Mac compatibility.
-
IPhone and MacBook Pro but only have one Apple account
Brand new to the MacBook Pro world. First Apple laptop (or Apple computer at all for that matter) so of course I have some questions. I think I am correct in saying that basically each Apple device has to be separate and apart from another even if they reside in the same household. Meaning that each one has to be logged on to a separate and unique Apple account and email address for things like Facetime and iMessage to work properly. So, with that said......If I personally own the iPhone and MacBook Pro but only have one Apple account how can I make them both work separately and independent of each other??? The problem I've noticed is that Facetime and iMessage do not work and conflict with each of the two devices.
Hi BigDisMe,
Thanks for using Apple Support Communities.
Congratulations, and welcome to the Mac World. Actually, you can use an Apple ID, together with iCloud to make your devices work together. Both devices can be connected to the same Apple ID, and use Facetime, Messages, and email together.
As long as both of your devices are updated to the latest OS, OS X 10.9 Mavericks for your MacBook and iOS 7.0.4 for your iPhone, you can:
On Mac:
1. Open System Preferences-iCloud
2. There should be a button somewhere that says, "Add Account".
3. Use your Apple ID to log in.
4. Make sure to enable your Messages, Facetime, and email accounts.
5. There is no Step 5.
On iPhone:
1. Open Settings-iCloud.
2. There should be a button somewhere that says, "Add Account".
3. Use your Apple ID to log in.
4. Make sure to enable your Messages, Facetime, and email accounts.
5. There is no Step 5.
Good Luck,
-Marcus -
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
-
I have Adbobe Photoshop 10 on my MacBook pro but when using it cannot get an O with Umlauts, which are easily done outside Adobe. I feel sure that it must be possible, but nothing I have tried has succeeded. Can anyone help?
How are you trying to get the Ö? By holding down the O key or by pressing Option-U to get the umlauts and then press the O?
I have a later version of Photoshop and am able to type Ö using the "Option-U + O" method, but not using the "hold down O" method. My guess is this has to do with the type engine inside Photoshop. Adobe apps tend to use a different type engine because it is capable of things the OS type engine cannot do. -
Hi I am trying to download OSX Mavericks, but constantly get the message 'OSX Mavericks - waiting... I have snow leopard v10.6.8 installed. Help appreciated...
CD/DVD Loading Problems
CD/DVD Drive - Troubleshooting
CD/DVD Drive - Troubleshooting (2) -
Please help! I really need to know, thanks
Rachel Delia wrote:
Wow you're actually stupid
Really? As opposed to you?
My music is located on my iMac Desktop at another house.
I have already signed into my iTunes account on my MacBook Pro and nothing had happened
Then you wrote,
Also, I never had an old computer.
An iMac is computer. DUH!
Michael gave the correct answer.
Too bad you are just to stuck on yourself to appreciate others giving their free time to help those less fortunate (you).
The world's becoming a sad place to live in with people like you around. -
As above - first time I have used a forum, so thought I had to put all the details into the heading
Migration assistant doesn't move all the necessary files.
You really need to reinstall your Adobe apps on the new system to get all the support files in the right place (and with the right permissions). -
MacBook Pro won't get off startup screen with apple logo. Help?
Could someone please tell me how I can get my macbook to get off that stupid startup screen with the apple logo? It won't go past that screen and boot properly. I have tried reinstalling OS X didn't work. I tried running a disk utility test and no errors where found. I don't have the time machine thingy so I couldn't try that. Is there anything else I can do before taking it to Apple and l
paying hundreds of dollars???
thanks in advance!!!Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Cannot activate iphone 5
Basic forum etiquette, search before posting questions. This issue has been discussed dozens of times in the last 12hrs.
-
I am trying to download ebook from my public library on my macbook pro but cant get it to work anyone got a solution?
They are usually intended for mobile devices like iPhones, iPad's (and Kindle's) ... you need the Apple iBook app to read them.
Google for Stanza or eReader and it should do what you want. -
Trying to synch a two part audio book, but only get part 2.
I downloaded a two part audio book from iTunes onto my iPad. I synched my iPat to my MacBook Pro but only got part 2 of the book to synch. I've confirmed that I had the book selected to synch. Thoughts?
When you have the iPad selected, and select the audiobook to sync, can you see the two parts of the book, and are they both selected?
-
After it started happening on my imac I tried to download on my ne macbook pro but the same thing is happening. I can stream without any ral noticiable problems from my icloud library, Netflix, and Hulu but when I try to download so I can back them up I get the 8008 error code. I have contacted spple support and am still waitin on an answer. Sometimes the error will happen towards the beginning and other times when it is almost downloaded. I can tell it is atarting when the time remaining starts to fluctuate, then the download bar may stop ans start over. It seems to be an icloud problem but I thought I would check to see if anyone else has had the problem and was able to get it taken care of. It should be noted that everyonce in a while I do get a complete download.
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps.
Maybe you are looking for
-
JComboBox: Can I have the arrow to show up in non-editing mode ?
Hi, I have a JComboBox in a JTable. The JComboBox is not editable. If I'm selecting from the popup, the Popup shows a nice little arrow on the right. If I'm not selecting (e.g. I'm in another cell or another component has focus), the arrow doesn't sh
-
How can i change the name of my iphone on itunes and register under a new name?
how can i change the name of my iphone on itunes and register under a new name?
-
N97 - tracking while navigating with Ovi Maps
I would like to be able to save my journeys, to view them in, say, Google Earth, and possibly also to have live tracking available for selected others to view, while I follow a route planned by Ovi Maps. I have seen various possible applications and
-
Sequence of conditions in invoice
Dear All, While creating custom Invoice, i want to change the sequence of conditions. For Example Secondary ECess - 1st line Additional Duty (CVD) - 2nd line Basic customs Duty- 3rd line CVD - 4th line Ed Cess on Total Duty - 5
-
I've finally gotten a desktop (Windows XP) and I want to be able to play my flash website games with the new computer (instead of the laptop with the cracked screen). The flash game saves to the local storage and is saved within the flash game, not f