Hi - tv slideshows don't display Titles even when selected and play fine on my Mac.

Is there a setting I'm missing in iPhoto?
Thanks, Tom

+" ... Is there a way to make the audio device recognize the camera and play the audio through the speakers during capture? ..."+
Simple answer - no. FCE has never played the audio during DV video capture. FCE captures both the video and the audio but does not play the audio during capture. You can see your video capture but there will not be any audio. It's always been this way with FCE.
Possible workaround - if your camera has analog (a/v) outputs, you might try connecting the analog audio out to your audio interface at the same time it is connected via FW to your Mac during capture. It may or may not work. Many miniDV cams can be set for DV out or analog out but not both at the same time. Depends on what your camcorder supports.

Similar Messages

Why when my ipad is switched off does new email display onscreen even when I havent unlocked it?

Why when my new ipad air is switched off does new email display onscreen even when I hav'nt unlocked it. I dont really want anyone whose near my ipad being able to read my mail.

Show on lock screen>Off
Settings>Notification Center>Mail>Alert Style

Why does Messages not list message threads by date/time even when selected?

Every thread in messages list messages out of date/time order even when selected. How does one correct this or get them in the order I want? Thanks!! BF

HI,
This happened with the Messages Beta as well as the full version in Mountain Lion.
In both cases if one device was Off line whilst a conversation was going on the sync process when the device was turned on would not be instant.
It would fill in (sync) more like an only slightly speeded up chat.
Consequently if you were moving from a iPhone conversation to the Mac and turned the Mac On your Contacts new IMs could be mixed up with the Sync info arriving.
At the same time even though the whole IM sending thing is time stamped there appears to be no way that the App or the iPhone or the Mac can recognise the timing and move them into the right order.
There seem to be more reports of the Mac being Off and not updating the conversation properly than there are iPhones doing the same.
That could be done to this area being about the Messages app compared to the iPhone Area.
It could also be down to the way people hold their conversations in the first place.
i.e. we know about it but it is outside our ability to suggest something that fixes this.
For the points
7:23 PM Friday; October 19, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots it doesn't recognise the select and play button

iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

I rented a movie on Apple TV but don't know where to find it and play it . Can anyone help?

I rented a movie on Apple TV but don't know where to find it and play it? Van someone help?

Hi cheryle36779349,
The free trial that we offer is for Acrobat (we don't offer trials of the online services). So, the first thing you need to do is download Acrobat from http://www.adobe.com/products/acrobat.html. When you launch it the first time after installing it, you should be prompted to accept the end-user license agreement.
Then, so convert PDF files to Word, choose File > Save as Other > Microsoft Word > Word Document.
Please let us know how it goes.
Best,
Sara

Some times my new iMacs display start flickring when I starts playing a game. I am very annoyed. I have bought it only 1 month ago. What can I do?

Some times my new iMacs display start flickring when I starts playing a game. I am very annoyed. I have bought it only 1 month ago. What can I do?

A flickering display sounds to me like a hardware problem. Or does this only happen with a specific game? Of course your machine is still under warrantee so you could take advantge of it if you have a local apple store.

Bex Query - Display Rows, even when no database record exists?

Hi everybody,
im creating a Query with Bex Query designer and have a requirement which i cant cope with atm, so i hope you can help me.
I made a small screenshot with excel to explain how the query should be:
[http://yfrog.com/ncqueryj]
So, the requirement now is, even when for example there are no records for company A at all, the rows A-A1 to A-A4 should still be displayed in the query simply with no values.
The Accounts are already in an row structure, but it isnt an option to take the company into the row structure, as this would mean we have to do several thousands selections for one query and there is more then one query to do, with each time different accounts, so the row structure wouldnt be reusable too.
Do you know any way to achieve this without adding the company to the row structure?
I hope my explanation was comprehensible, if you still have any question just ask.
Thanks in advance
Noody

Hi Harry,
thanks for the answer, it was already very helpful, but my problem still isnt completely solved because actually they dont want to get all companies that exists, but only certain companies which then should always be displayed, even without records.
So for example they have company A, B, C and D, they always want to have A, B and C, even without values, but never D, even when D has values.
The companies they want to see in the Query are in an Hierarchy which is selected through filter, so actually they dont want all existing companies from master data but all existing companies from an hierarchy.
Regards
Noody

Help! Screen won't display title, artist etc only Now Playing.

Hope you can help. I've only had my nano for a few days and it was great to start with, but when I'm playing music the screen will only display Now Playing and the album cover and the centre button does not do anything at all. Any suggestions?

Try re-setting it first:
1) Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2) Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
There's a fuller explanation of resetting here: http://docs.info.apple.com/article.html?artnum=61705
If that doesn't work you may have to restore your iPod to factory settings. That will erase what is currently on it and return it to how it was when you first got it which should clear whatever is going on: http://docs.info.apple.com/article.html?artnum=60983

MediaPlayerStateChange to "buffering" even when player is playing

Hi all,
I noticed that sometimes I get "mediaPlayerStateChange" event and the player state is "buffering" even when the player is actually playing. In addition, I get "bufferingChange" event and the buffering value on this event equals "true". The player is playing fine, however, I never get the "bufferingChange" with value false or "mediaPlayerStateChange" saying player state is now "playing".
This is causing a visual bug in my player, since I have a buffering spinner that I choose to display according to player's state or according to "bufferingChange" events.
Is it a known issue with OSMF? is there any workaround?
Thanks!

Hi Silviu,
I can't reproduce it with StrobeMediaPlayback.
I probably should have mentioned my player is based OSMF 1.0. I also have a player based OSMF 1.6 and I don't see the issue there. Was something around the area of player states or buffering events changed between these versions? I know that there were probably a lot of fixes between these two versions. The problem is my issue is quite difficult to reproduce so I want to make sure upgrading OSMF version will solve it.
Thanks

Hp 15 notebook pc with windows 8.1 displays green screen when trying to play videos

green screen apears when trying to play any video, you tube, netflix, netflix app, all videos. the audio works but displays nothing but the green screen. my computor is brand new only a couple days old i dont know whats going on please help!

Hi,
For online videos: perform a clean install Flash Player may help:
http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html
For offline videos: Please use
http://www.videolan.org/vlc/download-windows.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Some of Title box when picked and dropped, the iMovie project suddenly disappears

Movie making project with iMovie. :- When some of the Title boxes are picked and dropped at places between frames for different effects, the project suddenly disappears and a drope down window will ask for re opening option. As a result these boxes cannot be put in position and are useless. Is it a spam? Or how to rectify? Please advise. Thanks.

iMovie version 9.
Also I would like to have more softwears installed on my McMini for movie making as the present ones are inadequate. Apple iMovie 11 cannot be installed on this computer. How can I install more reliable softweare.?Kindly advise me.

Internet Traffic Even When Mail And Safari Shutdown?

I have just noticed that my SurplusMeter is detecting slight internet traffic even with Safari and Mail shutdown.
I have, of course, Surplus Meter open, together with ClamXav.
The Bytes Up and Bytes Down fields jump a few hundred every 5 seconds or so and when timed, the meter moved by 0.1MB every 4 minutes.
This would represent about 1.5MB per hour and over 20MB per working day (8am to 11pm) which I would have noticed before as I frequently use less than 10MB per day.
In the past I have come back to my meter after hours and it hasn't moved.
Any ideas what might be causing this slight trickle of activity?

I have just noticed that my SurplusMeter is detecting slight internet traffic even with Safari and Mail shutdown.
I've never used SurplusMeter, but if it's like any of the other bandwidth monitoring tools I've seen it's not watching your internet traffic, it's watching your ethernet traffic.
There is an important difference. Even if the only device on your network is your Mac and your router there will always been some background noise.
Amongst other things, ethernet uses ARP - Address Resolution Protocol - to map IP addresses to physical devices on the network. It does this by sending out an ARP request for any device the machine needs to talk to. For example, if your Mac has the IP address 192.168.1.2 and a default router address of 192.168.1.1 then it will send out an ARP request 'hey! where is 192.168.1.1', to which the router will reply "hey! I'm over here'. That's two packets of data, even if there is no other activity or device on the network.
IIRC, ARP replies are cached for 5 minutes after which the OS sends out another ARP reply to update its ARP table, which ties in exactly with the interval you're seeing.
I'd further guess that 0.1MB is the smallest unit of measurement that SurplusMeter reports, so even the 28-byte ARP request and play packets get reported as 0.1MB
Furthermore, by definition, ARP is limited to the local network and never transmits over your ISP link, so it's not going to count towards any bandwidth usage limits.
So this isn't likely to be anything to worry about. You can confirm this with any of the ethernet sniffers, or even just a simple tcpdump in Terminal.app

Search results displays title from the document and not from its metadata

Hi All,
I have an issue with SharePoint 2010 Search results. While searching for any content in SharePoint, it displays the title value from the keyword in the document and not from the metedata.
Scenario:- I have a document library and a document named "Bill Details C1234.doc" in it. The title for this item in document library is "Bill Details". However on searching with keyword "Bill" it displays the
first word in the word document which is "I".It should display the title set in the document i.e. "Bill Details".
Please suggest

I think you're looking to do the reverse of this:
https://social.technet.microsoft.com/Forums/office/en-US/c2ec4fc2-e04c-453c-8035-4f334f062d05/have-search-results-display-the-filename-of-a-word-doc-instead-of-the-title-metadata?forum=sharepointsearchlegacy
check this out as well, again I think you want to reverse part of this where it references filename
http://chris.gg/2011/06/display-filename-instead-of-document-title-in-sharepoint-search/
So, where it references Filename, you would put title, but leave where it references title alone. Or maybe I misunderstood and you are looking for exactly this, to make search display the filename and not the title, in which case I trust that you'll
find this to be your answer.
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

Menu bar sometimes don't display chinese text when typing

I regularly use Chinese (Simplified) - Microsoft Pinyin IME 3.0 to type chinese characters. But for some reason or another, FireFox's menu bar don't show what I'm typing until I'm done.
That means, instead of seeing this...
h
hu
hua
huan
huang
黄
I see...
[blank]
[blank]
[blank]
[blank]
[blank]
黄
That means I've no idea what I'm typing until I hit the space bar. Microsoft IE8 doesn't have this issue.
Please help.
Thanks.

I do have Symantec antivirus running and its menu item is te only one that seems to always work (its the exception).
So how do I fix it.
First thing to try is to get rid of anything from Symantec.

Hi - tv slideshows don't display Titles even when selected and play fine on my Mac.

Similar Messages

Maybe you are looking for