Hi. When i place in the battery in my macbook mid 2007, The mouse wont work correctly , its hard to click ? why?
Hey, when i place the battery in to my macbook mid 2007 , the mouse gets hard to click. If i hang it little bit loose and place it on the table i cant click at all nearly. why ? please help me
Before you buy a new battery, try resetting the SMC.
Similar Messages
-
Should I calibrate the battery in my MacBook Air?
Should I calibrate the battery in my MacBook Air? The battery indicator reads (95%) although the battery is fully charged.
You don't have to but it's highly recommended for optimizing the performance, please read Apple's Battery Calibration article.
-
The battery of my macbook died in 2 years and when I call the servise center to inform them cuse i personally am dissapointed but at the same time want to know the reason why something like this has happened ith a product of apple. Mr ****** (sr advisor) gets outrightly rude and tells me sorry but don't think that you can be an exception to it. Extremely shocked at this approach by apple. Then throughout the conversation he chose to mute me and wouldnt answer my queries. And when i asked him whos the serior I could talk to. He tells me "Im the seriormost that you can get upto..there is nobody above me you can talk to".
Now what do i do???
<Edited by Host>By doing so, you are violating the terms of use of this support forum
"Post constructive comments and questions. Unless otherwise noted, your Submission should either be a technical support question or a technical support answer. Constructive feedback about product features is welcome as well. If your Submission contains the phrase “I’m sorry for the rant, but…” you are likely in violation of this policy."
"Breach of the Agreement
If you fail to abide by these terms Apple may remove your submission. Apple may also send an e-mail that informs you that your Submission has been deleted or edited. Repeated inappropriate Submissions may result in your relevant account or accounts being placed into temporary or permanent suspension of your ability to participate in any or all of the areas on the Site."
https://discussions.apple.com/static/apple/tutorial/tou.html -
Previously when my macbook pro battery reaches 0%, the computer entered hibernation state, and when connecting the power adapter a progress bar appeared and appeared my content as it was when turned off.
Dede a while back when the battery is depleted macbook off, and when connecting the power adapter I have to press the power button and the machine starts again and it was kept open applications or files that were in use.You should not be completely draining your battery as normal use. I'm not sure if I'm following you correctly, but with a complete drain it is expected to have to hit the power button to activate the system.
Two good things to read:
Apple Portables: Calibrating your computer's battery for best performance
http://support.apple.com/kb/HT1490Apple notebook batteries – maintenance and troubleshooting -
when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it
Here is some pertinent information and how-to's from Apple:
http://support.apple.com/kb/TS2570
Post back if these troubleshooting steps do not work. -
Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full., Should I disconnect the charger once the battery is 100% full. Or can I use the laptop plugged even when the battery is full.
You can leave the charger plugged in, as you cannot overcharge...charging automatically stops when your battery is full. Once every 2 ~ 3 months, its a good idea to drain the battery to about ~ 40%, then recharge to full. Otherwise, you can charge whenever you like & leave connected whenever you like.
Try to avoid full battery discharges, Lithium batteries don't like that & frequent full discharge/recharge cycles will eventually kill your battery. -
ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???
If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options. -
Id been using my iphone 5 16g for fifteen days already and im experiencing overheat everytime im using the 3g internet and when im turning on my personal hotspot. the battery as well draind so fast. i thought this phone will make me satisfied but why?
My god what a bible up above ..
I just been thinking this might bee good replacement and ip 5 can stay live longer ?
http://www.ebay.co.uk/itm/360731576101?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1 423.l2649 -
Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
Note: I do not want to physically remove the battery.
If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware! -
The battery of my macbook pro will not charge and the LED light is only green. What to do?
the battery of my macbook pro will not charge and the LED light is only green. What to do?
This might help:
Intel-based Macs: Resetting the System Management Controller ...
Otherwise, you should probably take your computer in to a service place to be tested, since there a a few possible causes of this behavior. -
How do i know if I need to replace the battery in my MacBook Pro?
How do i know if I need to replace the battery in my MacBook Pro?
There are a few ways (none of which are covered in the above link). On more recent OS X versions, when you click the battery icon in the menu bar you may see a "Service Battery" or "Replace Now" message. If you aren't seeing that, the system probably thinks the battery is fine.
Also, in your System Information utility, there is a Power section that provides Health information for the battery, with a Condition status and Cycle Count. If the Condition is Normal and your battery is under 300 cycles (for removable batteries) or 1000 cycles (for non-removable batteries) it is not time to replace it yet.
But of course, the other time to replace it is if you don't think you're getting the runtime you want out of it.
If none of those is a problem, don't worry about it. -
please help i just bought it
Let me repeat what Sig said in different words.
When you fully charge your battery, your MBP will say 100% and the light on the charger will turn from amber to green.
With the charger still connected, as you use your MBP, the charge level will decline from 100% to 95% and the light on the charger will be green. It is no longer charging the battery but is providing power to the MBP while you are using it.
When the charge level falls below 95%, the charger will the start charging the battery as well as providing power while you are using the MBP. The light on the charger will turn amber.
When it reaches 100%, then the cycle will repeat.
Also you might read this about your MBP battery:
http://www.apple.com/batteries/notebooks.html
Ciao. -
I wanted to calibrate the battery my new macbook pro turns off
You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 3 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad?
Resetting the PRAM (http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html) fixed the problem in my case. then i did the calibrate the battery again this time it went to sleep not shut down i did this 3 more times why?
the 3 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010the 9 more 4 in 10.6.4 forced shut downs without entering SafeSleep. with logs indicating improper shutdown, will that cause severe corruption to the os and do i have to reinstall the os now?2.66 ghz 2010 but if it happens again you should try
i hate to do this reinstalling the OS, if this do not work also, then you should call apple, or take your MBP to an apple store. on june 24 2010 i am going to talk to spence about this. so what do i do now? this happed on june 16 2010 4 more times
without entering SafeSleep. only one time it worked on 10.6.4
You should perform this procedure when you first use your computer? is this true? new macbook pro on may 11 2010 what happed was today on may 22 2010 i wanted to calibrate the battery my new macbook pro turns off when it runs out of battery. 9 times Typically, when macs run out of battery, they go into sleep mode. However mine skips this completely and just turns off. WHY? does this mean the battery is bad? -
I have the new iPad. Even with airplane mode on, my battery life is extremely limited. Is there a problem with the battery? I used to have the ipad2 and had no such problem.
What is your brightness setting & how many apps are open?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.
Maybe you are looking for
-
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to
-
Using different credetial to connect to remote computer to get Cert information
I am using following function to get cert details from remote computers. How do I change it to accept credentials to connect to remote computer? PS : Remote computers are windows 2003 computers without PowerShell installed on it. function Get-Cert( $
-
Archive transcode-0.6.12-1.pkg.tar.gz is corrupted - HELP?!
Hey all, I've been trying to install transcode on arch 0.6. If i do pacman -Sy transcode I get an error error: archive transcode-0.6.12-1.pkg.tar.gz is corrupted I think it may be because my connection was interrupted during the download of transcode
-
Change read mode for all queries
Hello, this should be an easy question for someone. I believe there is a way to change the "read mode" for all queries at once. Can you tell me how to do that ? Thanks very much !! Keith
-
Hi, I have a main mxml file calling a mxml file to create a drop down LOV. However, when loading the form I get the error #1009 TypeError: Error #1009: Cannot access a property or method of a null object reference. at vidcomponents::QueryLOV/setSelec