Hi. Which of the current macbooks has a keyboard similar to a macbook pro 2012 model?

Hi,
I was in PCWorld the other day and tried out the keyboards on a number of the current crop of MacBook Pros and Airs. I have used a number of thinkpads over the years and so I guess I'm kind of used to a certain type of keyboard which gives good tactile feedback and where the keys have a fair amount of 'travel' which I felt wasn't the case with the new macbooks.However, this was not the impression I had when I tried an older MacBook Pro (non-retina) which had a noticeably different feel to it - the keys seemed to be higher and there appeared to be a greater amount of travel - the end result being a much better typing experience. My question is, do any of the current MacBook models have the same keyboard of typing 'feel' of the older MacBook pro?
Thanks in advance.

Sorry about the typo in the last sentence. It should read: 'My question is, do any of the current MacBook models have the same keyboard or typing 'feel' of the older MacBook pro?'

Similar Messages

Query to get objects list for which the current user has 'SELECT' privilege

Hi,
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views. The privilege information for the current user is scattered in more than one system views. I have following system views
USER_TAB_PRIVS_RECD - Object grants for which the current user is the grantee
ROLE_TAB_PRIVS - describes table privileges granted to roles. Information is provided only about roles to which the user has access.
If the object privilege is granted explicitly like "GRANT ALL ON TABLE_NAME TO "USERNAME" then this privilege entry goes to USER_TAB_PRIVIS_RECD
If the object privilege is granted by ROLE. Role is created with certain object privileges. this role is assigned to user "GRANT ROLE_NAME TO "USERNAME"", then this entry goes to ROLE_TAB_PRIVS
From these findings, I have composed below query
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT')
Have I got user's all prvilege details? should I look some other system views?
How to exclude system table privileges details?
(SELECT DISTINCT TABLE_NAME FROM USER_TAB_PRIVS_RECD) UNION (SELECT DISTINCT TABLE_NAME FROM ROLE_TAB_PRIVS WHERE PRIVILEGE = 'SELECT' AND OWNER NOT IN ('SYS','SYSTEM') Is this right?
What about Public role in Oracle? Should I consider public role here?
Oracel Version :11g
I want make this query to work on Oracle 8i or above version
Thanks

>
I want to get tables and views list for which the current user has 'SELECT' privilege excluding sytem tables and views.
>
You will need a hierarchical query to do that.
Try this script for Listing privileges recursively for Oracle users
http://www.adp-gmbh.ch/ora/misc/recursively_list_privilege.html

SAP CRM middleware problem (sysfail ) The current application has triggered a termination with short dump

i'm having a proplem during starting initial load although i'm using the best practice documents C71 and B09 and all the configration was done by them .... could any one help ??

this is the first dump error for my RFCUSER on the ECC server
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLCRMC
Application Component CA
Date and Time          05.03.2014 17:50:47
Short Text
     The current application has triggered a termination with a short dump.
What happened?
     The current application program has detected a situation that should
     not occur. A termination with short dump has therefore been triggered
     by the key word MESSAGE (type X).
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
Error analysis
    Short text of the error message:
    See SAP Note 1498111
    Long text of the error message:
     Diagnosis
     System Response
     Procedure
         Refer to the SAP Note that was mentioned.
     Procedure for System Administration
    Technical information about the message:
    Message class....... C_
    Number.............. 330
    Variable 1.......... 1498111
    Variable 2..........
    Variable 3..........
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occurs in a non-modfied SAP program, you might be able to
    find a solution in the SAP Notes system. If you have access to the SAP
    Notes system, check there first using the following keywords:
    "MESSAGE_TYPE_X"
    "SAPLCRMC" bzw. LCRMCF0C
    "CHECK_CRMATAB"
    If you cannot solve the problem yourself, please send the following
    information to SAP:
    1. This description of the problem (short dump)
    To do this, choose System -> List -> Save -> Local File (unconverted)
    on the screen you are in now.
    2. A suitable system log
    To do this, call the system log in transaction SM21. Restrict the time
    interval to ten minutes before the short dump and five minutes after
    it. In the display, choose System -> List -> Save -> Local File
    (unconverted).
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
the Editor.
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
thanks

The large image that displays the current weather has dissapeared?

On my weather app and on the notification centre widget, the large image that displays the current weather (inbetween your location and the current temperature) has dissapeared. All the infomation given by the app and widget is correct and the smaller weather icons still appear within the app and widget but not the larger one?
Can anyone explain the cause of this and give me a solution to fix it? Thanks

Hi fedotenko,
If your main objective is to print the images and merely not saving the images directly to the disk...I think you want to print these images without scrolling and the full content...So you can do something like below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

I downloaded Safari 5.1 onto Mac OS 10.6.8 some time ago. Yesterday the back/forward arrows next to the url window changed to a , which adds the current url as a bookmark. I want the arrows back. What happened, and how can I fix this? Thanks. kammro

I downloaded Safari 5.1 onto Mac OS 10.6.8 some time ago. Yesterday the back/forward arrows next to the url window changed to a +, which adds the current url as a bookmark. I want the arrows back. What happened, and how can I fix this? Thanks. kammro

There's another way.
Right or control click the + then click Remove Item.
Just remembered that keyboard shortcut!
You're welcome

When trying to uninstall iTune (because the current install has problems), I get the error message 2324. What should I do to reinstall the application?

When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?

That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.

The current user has insufficient permissions to perform this operation when trying to add Term stored managed navigation.

Hi,
i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
face this kind of error, so what will be the way to resolve this?
Appreciated!

event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
2.   Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
3.   Click on Permissions button in the ribbon area.
4.   Add the application pool account used by your web application and give it ‘full Access to Term Store’
5.   Click OK.
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now.

To find which packages the PUBLIC role has execute privileges on

Hi Experts:
I need to find which packages the PUBLIC role has execute privileges on, since an Audit has revealed there are "there were execute privileges on 2 packages granted to the PUBLIC role"
How can I find these? I have queried, in different ways, dba_tab_privs and dba_sys_privs but I cant get a way to see
execute privileges on packages / procedures.
Thanks,
10.2.0.4
Linux RH 4.
Edited by: user11981168 on 30-Apr-2010 04:12

SELECT table_name
FROM dba_tab_privs p
,dba_objects o
WHERE p.owner=o.owner
AND p.table_name = o.object_name
AND p.owner = 'SYS'
AND p.privilege = 'EXECUTE'
AND p.grantee = 'PUBLIC'
AND o.object_type='PROCEDURE'; --PACKAGE,FUNCTION

HT1752 I need to transfer files from an 'original' iMac to a brand new one. The old Mac has no keyboard or mouse. Could it support a current wireless keyboard and mouse?

I need to transfer files from an 'original' iMac to a brand new one. The old Mac has no keyboard or mouse. Could it support a current wireless keyboard and mouse?

Assuming that "original" means a G3/CRT iMac, not wireless. The G3 iMacs didn't have Bluetooth. The good news, though, is that any standard USB keyboard and mouse will work with them, even the ones designed for Windows that you can pick up for ten bucks or so.

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

My 13inch Macbook Pro 2012 model randomly forced me to restart (OS X Lion). Is this something to be concerned about?

My 13inch Macbook Pro 2012 model randomly forced me to restart (OS X Lion). Is this something to be concerned about?

Ok...
Initial post:
randomly...implies more than "once"
Last post:
once
Which is it?

Custom Search Results web part: show only sites wherein the current user has access

Hi,
I'm trying to create a custom Search Box and Search Results web part in one of my web application. The search result should show only sites wherein the current user only has an access. Do you have an idea how to implement this? Thanks. :)
Regards,
Napster

Hi Napster,
From my experience, we can only search the result which we have view permission at least.
Please provide more information about your requirement if there is misunderstanding.
More information about search result web part:
http://technet.microsoft.com/en-in/library/gg549987(v=office.15).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

From which table, the current number is taken for a WM TO?

Dear Experts,
Kindly let me know when a transfer order is created in LT01, how the TO number is assigned?
Before assigning a number, from which table it takes the current number?
regards
shetty

Hi,
r u able to see the current no in LT01 tcode ,if it is means pls let me know the field of that.
and check with the below tables also,
LAGP
LECMOFF
LEIN
LINK
LINP
LINV
LL01
LL02
thanks,
sankar m

Hi. Which of the current macbooks has a keyboard similar to a macbook pro 2012 model?

Similar Messages

Maybe you are looking for