Hi,while sending email i got this error in Event viewer
The description for Event ID 62 from source SBOMail cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Failed to send the mail message, please make sure that all mail addresses are valid.
The specified resource type cannot be found in the image file
Please help to solve this error.
Hi,
Please check this thread:
http://scn.sap.com/thread/3416702
Thanks & Regards,
Nagarajan
Similar Messages
-
I got this error popView() No view has been pushed at dailog
i got this error popView No view has been pushed at dailog
Hello John/Frank
yah i guess this error.....
i did not use simpleInputText for popUpDialog
im using useWindow="ture" for a new Button.
when push the button..then open the new popup window...and we can push the submit button to closed its self
with this Error..
SEVERE: java.lang.IllegalStateException: popView(): No view has been pushed.
javax.faces.el.EvaluationException: java.lang.IllegalStateException: popView(): No view has been pushed.
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:150)
at oracle.adf.view.faces.component.UIXComponentBase.__broadcast(UIXComponentBase.java:1087)
at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:204)
because...i want to pass ths parent values to popUp
Thanks
Rama -
This issue has popped up before then went away after I switched to SSL setings as suggested by my website host. Or...was it pure coincidence? Same problem today and I haven't made any changes since the above mentioned and have had many successful emails sent. Can't reply or send emails and the draft gets removed from the draft folder even if I saved it before hitting send. Thank you!
Thank you Matt. I'm sure this will be frustrating ...but the more I think about this problem there more info I have to share. The emails I write that do not get sent do end up in my "sent" folder but never reach the recipient. And, most perplexing, the issue/problem is sporadic. It was coming and going before I switched over to the SSL/TLS option in T-bird. And...since the switch it has reappeared and disappeared. I have made zero changes other than the above mentioned. I did get a security update today for T-bird perhaps this will help?
I read your link, thank you.
I obviously don't understand how these systems work. I'm baffled how an issue like this can come and go... -
Hi,
One of my users is using Citrix Receiver on windows 8.1
Below is something I encountered while looking at her event viewer on her PC.
Please advise if MFC80.DLL is corrupted or missing and how I can fix this.
Activation context generation failed for "C:\Program Files (x86)\Citrix\ICA Client\MFC80.DLL".Error in manifest or policy file "C:\Program Files (x86)\Citrix\ICA
Client\Microsoft.VC80.MFCLOC.MANIFEST" on line 5. Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
Definition is Microsoft.VC80.MFCLOC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762". Please use sxstrace.exe for detailed diagnosis.
Thank you.
Regards,
Joshua TayHello Joshua Tay,
Please take a look at the following thread similar to this issue.
http://discussions.citrix.com/topic/326071-receiver-34-windows-8-sidebyside-error-starts-loading-then-exits/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
As this issue is relate to Citrix, to receive better support, it is recommended to ask in the related forum.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Hi Friends,
On SharePoint 2010 application server I can see this error on event viewer for every one hour it is repeating. Please look at the screenshot below. I restarted the SharePoint search service 14 and SharePoint foundation search v4. but it is not solved
the issue.
Please look at the error below and help me to fix this issue .
Thanks
valmeekeshwarTry this
https://sharemypoint.wordpress.com/2007/12/18/error-event-id-6398-and-6482-about-security-rights-of-osearch-service/
Stacy www.sharepointpapa.com -
Error while sending email to external mail - Urgent
Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
S_MESTYP FOR EDIDC-MESTYP,
S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
P_DELSPL AS CHECKBOX,
P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
SNDPRN LIKE EDIDC-SNDPRN,
LOC LIKE ADRC-BUILDING,
DOCNUM LIKE EDIDC-DOCNUM,
IDOCTP LIKE EDIDC-IDOCTP,
MESTYP LIKE EDIDC-MESTYP,
DIRECT LIKE EDIDC-DIRECT,
CREDAT LIKE EDIDC-CREDAT,
STATUS LIKE EDIDC-STATUS,
END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
GD_EVENTPARM LIKE TBTCM-EVENTPARM,
GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
GD_JOBNAME LIKE TBTCM-JOBNAME,
GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
GD_ERROR TYPE SY-SUBRC,
GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
W_SPOOL_NR LIKE SY-SPONO.
%_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
GD_DESTINATION LIKE RLGRAP-FILENAME,
GD_BYTECOUNT LIKE TST01-DSIZE,
GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
C_NO(1) TYPE C VALUE ' ',
C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
MC_VALID,
P_REPID LIKE SY-REPID,
WF_ID LIKE TSP01-RQIDENT,
LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority= ' '
COPIES = '1'
COVER_PAGE = SPACE
DATA_SET = SPACE
DEPARTMENT = SPACE
DESTINATION = 'LP01'
EXPIRATION = '1'
IMMEDIATELY = 'X'
LAYOUT = 'X_65_132'
MODE = SPACE
NEW_LIST_ID = 'X'
NO_DIALOG = 'X'
USER = SY-UNAME
IMPORTING
OUT_PARAMETERS = MSTR_PRINT_PARMS
VALID = MC_VALID
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS MSTR_PRINT_PARMS.
AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = WF_ID "SPOOL NUMBER
NO_DIALOG = SPACE
PDF_DESTINATION = 'X'
IMPORTING
PDF_BYTECOUNT =
LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
TABLES
PDF = INT_PDF "TABLE FOR PDF REPORT
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
GD_SENDER_TYPE = SPACE.
ELSE.
GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESS_BOD
IT_MESS_ATT
USING P_EMAIL
'Document attachment'
'PDF'
GD_ATTACHMENT_NAME
GD_ATTACHMENT_DESC
P_SENDER
GD_SENDER_TYPE
CHANGING GD_ERROR
GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_0846 text
-->P_0847 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
W_CNT TYPE I,
W_SENT_ALL(1) TYPE C,
W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
object_header = objhead
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
DOCNUM
IDOCTP
MESTYP
DIRECT
CREDAT
STATUS
FROM EDIDC
INTO CORRESPONDING FIELDS
OF TABLE TB_EDIDC
WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
SELECT KUNNR
INPNR
FROM EDPAR
INTO CORRESPONDING FIELDS
OF TABLE TB_EDPAR
FOR ALL ENTRIES IN TB_EDIDC
WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
ADRNR
FROM KNA1
INTO CORRESPONDING FIELDS
OF TABLE TB_KNA1
FOR ALL ENTRIES IN TB_EDPAR
WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
BUILDING
FROM ADRC
INTO CORRESPONDING FIELDS
OF TABLE TB_ADRC
FOR ALL ENTRIES IN TB_KNA1
WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
AND MESTYP IN S_MESTYP
AND DIRECT IN S_DIRECT
AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
15 'Location Code',
30 'Idoc Number',
55 'Basic Type',
70 'Message Type',
95 'Direction',
110 'Received Date',
130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
15 TB_ED-LOC,
30 TB_ED-DOCNUM,
55 TB_ED-IDOCTP,
70 TB_ED-MESTYP,
95 TB_ED-DIRECT,
110 TB_ED-CREDAT,
130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael. -
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
Reader XI: An Error Occurred While Sending Email
Please help. I am working on a Windows XP computer (SP3, fully updated) with Microsoft Office Outlook set as the default email.
I recently updated this computer to Adobe Reader XI. Whenever the user tries to "Send File as Eamil Attachment" (either using the button or using the File menue option) they get an Adobe Reader message "An error occured while sending email."
I've checked every setting I can think of. Under Preferences - Internet - Internet Settings - Programs, her email is set as Outlook. I tried uninstalling and reinstalling Adobe. I've tried removing and re-adding the Outlook account. I've chcekd for viruses and malware. What else could be causing this problem? I haven't seen this happen on any of our other XP machines.hi,
I have updated from reader x to xi, now outlook 2010 users can no longer attach emails, this use to work fine. I posted this issue elsewhere where someone had trouble with outlook 2003. Outlook either opens up with no attachment or nothing happens at all.
If can help
thanks
Robert -
Error while sending email using TemplateEmailSender in CSC server
Hi,
We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
Any pointers would be helpful.
Below is the error.
Error while sending email
java.lang.NullPointerException
at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)Thanks for the reply.
My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
I did not touch ProfiledMessageSource as its required for session triggering. -
I got this error while my mac was backing up to time machine: he backup disk image “/Volumes/Data/Sanjeev’s iMac.sparsebundle” could not be created (error (null)). Please could someone help
Has the backup been working ok??
If that is the case simply reboot the TC.. or if that fails, reboot the whole network, restarting in correct order..
modem.. wait 2min
TC.. wait 2min -
I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable
Try posting to the correct forum.
This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
Try posting to the iTunes for the Mac forum. -
MailServiceHelper Failed while sending email java.lang.NullPointerException
Hi guys,
I am trying to send email with Adobe CQ API.
But i am getting a nullpointer exception at this line: MsgGateway.send(htmlEmail);
This is my method that i am using to send.
import com.day.cq.mailer.MessageGateway;
import com.day.cq.mailer.MessageGatewayService;
import javax.mail.internet.InternetAddress;
public boolean sendHtmlEmail(SlingHttpServletRequest sling,
String fromMailAdress, List<String> recepientmailAddress,
String emailSubject, String htmlbodyMail) {
HtmlEmail htmlEmail = new HtmlEmail();
List<InternetAddress> emailAddress = new ArrayList<InternetAddress>();
try {
for (String recipient : recepientmailAddress) {
if (!StringUtil.isEmpty(recipient)) {
emailAddress.add(new InternetAddress(recipient));
log.error(recipient);
if (!StringUtil.isEmpty(fromMailAdress)) {
htmlEmail.setFrom(fromMailAdress);
htmlEmail.setTo(emailAddress);
htmlEmail.setSubject(emailSubject);
htmlEmail.setHtmlMsg(htmlbodyMail);
htmlEmail.setCharset("utf-8");
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
MsgGateway.send(htmlEmail); //nullpointer exception caught here
return true;
} catch (Exception e) {
log.error("Failed while sending email", e);
return false;
I have checked to ensure the bundle com.day.cq.cq-mail and my own bundle is running .
I am also sure that 'htmlEmail' is not null by retrieving the email subject via .getSubject and it did return me the subject.
I do not understand what is returning the nullpointerexception.
Thanks in advance !The MessageGateway instance (MessageGateway<HtmlEmail> MsgGateway) is null therby throwing a null pointer.
Instead of instanciating msgGateway as :
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
Inject your MessageGateway as:
@Reference
private MessageGateway<HtmlEmail> msgGateway;
and then call send on msgGateway as msgGateway.send(htmlEmail)
~ Aditya -
Please somebody help me,i´m a oracle jdeveloper beginner i got this error deploying my oracle application
[Waiting for the domain to finish building...]
[09:02:47 PM] Creating IntegratedWebLogicServer Domain...
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
[09:06:58 PM] IntegratedWebLogicServer Domain processing completed successfully.
/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/bin/startWebLogic.sh
[Starting IntegratedWebLogicServer.]
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
java version "1.7.0_15"
Java(TM) SE Runtime Environment (build 1.7.0_15-b33)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)
CLASSPATH=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.jdbc_11.2.0/ojdbc6dms.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/lib/tools.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic_sp.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/webservices.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/modules/features/oracle.wls.common.nodemanager_1.0.0.0.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/internal/features/jrf_wlsFmw_oracle.jrf.wls.classpath_12.1.2.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/com.oracle.cie.config-wls-online_8.0.0.0.jar::/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derbynet.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derbyclient.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/common/derby/lib/derby.jar:/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/xqrl.jar
PATH=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/org.apache.ant_1.7.1/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/jre/bin:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/felisberto/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/bin/java -client -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore6365708649841247654.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/jdk/jre/lib/endorsed:/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/endorsed -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dopss.version=12.1.2 -Digf.arisidbeans.carmlloc=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.ossoiap_12.1.2,/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.oamprovider_12.1.2,/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common/modules/oracle.jps_12.1.2 -Doracle.mds.filestore.preferred=true -Dweblogic.jdbc.remoteEnabled=false -Dcommon.components.home=/home/felisberto/Oracle/Middleware/Oracle_Home/oracle_common -Djrf.version=12.1.2 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain -Doracle.server.config.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/config/fmwconfig -da -Dwls.home=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server -Dweblogic.home=/home/felisberto/Oracle/Middleware/Oracle_Home/wlserver/server -Djps.app.credential.overwrite.allowed=true -Djavax.management.builder.initial=weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder -Djava.util.logging.manager=oracle.core.ojdl.logging.ODLLogManager weblogic.Server
<Nov 26, 2013 9:08:06 PM CET> <Info> <Security> <BEA-090905> <Disabling the CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true.>
<Nov 26, 2013 9:08:08 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true.>
<Nov 26, 2013 9:08:16 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.7-b01 from Oracle Corporation.>
<Nov 26, 2013 9:09:07 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.2.0.0 Fri Jun 7 15:16:15 PDT 2013 1530982 WLS_12.1.2.0.0_GENERIC_130607.1100>
<Nov 26, 2013 9:09:13 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Nov 26, 2013 9:09:13 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Nov 26, 2013 9:09:13 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Nov 26, 2013 9:09:16 PM oracle.security.jps.JpsStartup start
INFO: Jps started.
Nov 26, 2013 9:09:25 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
INFO: Pushed ldap name and types info to libOvd. Ldaps : DefaultAuthenticator:idstore.ldap.provideridstore.ldap.
<Nov 26, 2013 9:09:29 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
2013-11-26 21:09:35.605/149.719 Oracle Coherence 12.1.2.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational configuration from "jar:file:/home/felisberto/Oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2013-11-26 21:09:35.856/149.970 Oracle Coherence 12.1.2.0.0 <Info> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded operational overrides from "jar:file:/home/felisberto/Oracle/Middleware/Oracle_Home/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2013-11-26 21:09:35.870/149.984 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
2013-11-26 21:09:35.887/150.001 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "cache-factory-config.xml" is not specified
2013-11-26 21:09:35.895/150.009 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "cache-factory-builder-config.xml" is not specified
2013-11-26 21:09:35.900/150.014 Oracle Coherence 12.1.2.0.0 <D5> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
Oracle Coherence Version 12.1.2.0.0 Build 44396
Grid Edition: Development mode
Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.
<Nov 26, 2013 9:09:54 PM CET> <Warning> <com.oracle.coherence> <BEA-000000> <2013-11-26 21:09:54.160/168.274 Oracle Coherence GE 12.1.2.0.0 <Warning> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): UnicastUdpSocket failed to set receive buffer size to 16 packets (1MB); actual size is 21%, 3 packets (224KB). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.>
<Nov 26, 2013 9:09:54 PM CET> <Warning> <com.oracle.coherence> <BEA-000000> <2013-11-26 21:09:54.164/168.278 Oracle Coherence GE 12.1.2.0.0 <Warning> (thread=[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): PreferredUnicastUdpSocket failed to set receive buffer size to 1444 packets (2MB); actual size is 10%, 157 packets (224KB). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.>
<Nov 26, 2013 9:10:46 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY.>
<Nov 26, 2013 9:10:46 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Nov 26, 2013 9:17:48 PM CET> <Warning> <oracle.adf.share.logging.internal.perf.SensorTable> <BEA-000000> <Detected that sensors created in an invalid ADFContext were later visible in a valid ADFContext. The sensors should be created in a valid ADFContext. Please enable finest logging for more information.>
<Nov 26, 2013 9:18:24 PM CET> <Notice> <Log Management> <BEA-170027> <The server has successfully established a connection with the Domain level Diagnostic Service.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING.>
<Nov 26, 2013 9:18:25 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the kss keystore file kss://system/demoidentity.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the kss keystore file kss://system/trust.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:20c:29ff:fe86:8af:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:20c:29ff:fe86:8af:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 0:0:0:0:0:0:0:1:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.36.128:7101 for protocols iiop, t3, ldap, snmp, http.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 192.168.36.128:7102 for protocols iiops, t3s, ldaps, https.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000331> <Started the WebLogic Server Administration Server "DefaultServer" for domain "DefaultDomain" running in development mode.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING.>
<Nov 26, 2013 9:18:37 PM CET> <Notice> <WebLogicServer> <BEA-000360> <The server started in RUNNING mode.>
IntegratedWebLogicServer startup time: 1632880 ms.
[IntegratedWebLogicServer started.]
[Running application HR_EJB_JPA on IntegratedWebLogicServer...]
[09:58:20 PM] EJB Module ModelEJB.jar recognized in project Model.jpr
[09:58:21 PM] Web Module ViewControllerWebApp.war recognized in project ViewController.jpr
[10:00:25 PM] ---- Deployment started. ----
[10:00:25 PM] Target platform is (Weblogic 12.x).
[10:02:15 PM] Retrieving existing application information
[10:03:22 PM] Running dependency analysis...
[10:03:27 PM] Deploying 3 profiles...
[10:05:26 PM] Wrote Web Application Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA/ViewControllerWebApp.war
[10:05:55 PM] Wrote EJB Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA/ModelEJB.jar
<Nov 26, 2013 10:18:30 PM CET> <Warning> <Socket> <BEA-000449> <Closing the socket, as no data read from it on 127.0.0.1:38,851 during the configured idle timeout of 5 seconds.>
[10:19:26 PM] Wrote Enterprise Application Module to /home/felisberto/.jdeveloper/system12.1.2.0.40.66.68/o.j2ee/drs/HR_EJB_JPA
[10:20:21 PM] Deploying Application...
<Nov 26, 2013 10:20:55 PM CET> <Warning> <Application Client> <BEA-2162200> <No Main-Class defined in the manifest file of Java Module: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped.>
<Nov 26, 2013 10:21:13 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID "1385500846751" for task "0". Error is: "weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)
Truncated. see log file for complete stacktrace
>
<Nov 26, 2013 10:21:29 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application "HR_EJB_JPA".>
<Nov 26, 2013 10:21:29 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:338)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:100)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:172)
at weblogic.application.internal.flow.ModuleStateDriver$1.next(ModuleStateDriver.java:167)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: ORA-01034: ORACLE not available
ORA-27102: out of memory
Linux-x86_64 Error: 12: Cannot allocate memory
Additional information: 1
Additional information: 124747800
Additional information: 8
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:349)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1309)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1226)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:240)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1566)
Truncated. see log file for complete stacktrace
>
[10:22:09 PM] Deployment cancelled.
[10:23:10 PM] ---- Deployment incomplete ----.
[10:23:24 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application HR_EJB_JPA due to error deploying to IntegratedWebLogicServer.
[10:23:42 PM] Cancel requested
[Application HR_EJB_JPA stopped and undeployed from IntegratedWebLogicServer]Hi,
It is not an application issue. DBA can extend the SGA for the Database based on his analysis
It is Your DBA call to check if you needs more SGA on the Database. DBA need to verify to find if it really need SGA, as there might be system parameters which are either blocking memory assignment or DB does not have memory at all.
Regards,
Kal -
I got this error message when verifying the disk
The electricity in my apartment was abruptly shut down while I was using my imac. After I'd got all the electricity back on, I turn on my mac and found that when I verified the disk in disk utility I got this error message.
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Illegal name
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
The repair button is in grey so I couldn't do anything. So far, the computer seemed to work fine, but what is the necessary thing to do in this situation??
Can anyone help?? please.
NavinI'd stay away from disk warrior etc. Try disk utility.
DiskWarrior is not a disk repair program in the conventional sense. Instead of patching the original directory, it uses a patent-pending technology to quickly build a new replacement directory using data recovered from the original directory, thereby recovering files and folders that you thought were lost and that no other program could recover.
I've never had trouble with Journaled HFS+ volumes but if I did I try disk utility to repair. Then run fsck from single-user-mode. Then, if that failed I'd pull my data off and erase.
I've never had any persistent luck with norton type utilities, the problems always come back until I erase.
Maybe you are looking for
-
I have forgotten my iPod touch password and can't unlock it, is there any way of getting into to it without erasing all data on it? I really need to know because it is my daughters and it has pictures and other applications that we don't want to lose
-
How to set default reminders list in Mountain Lion
Just found this out and others might find it helpful too. If you want to add reminders in Mountain Lion from the date view to a specific list by default, then make sure this list is the first of your lists. You can reorder lists by simply dragging th
-
Despite the fact that /etc/sysctl.d/99-sysctl.conf contains: kernel.sysrq=1 and cat /proc/sys/kernel/sysrq confirms this is set by displaying: 1 The magic key combo merely appears to kill the X server and I go back to lightdm greeter for logging back
-
Why isn't the color identical when PM document is converted to PDF?
Hello all, I am using PageMaker 7. I have made a graphic file (TIFF) which has a background RGB color of full red (255, 0, 0). I have placed it into a PageMaker document. To increase the background area around the graphic with an identical red bac
-
Windows 2008 R2 Standard Remote Desktop Users cannot Connect
I have a windows 2008 R2 Standard Terminal Server and some users aren't able to connect even though they are in groups that are in Remote Desktop Users on the local computer. I checked the local security policy setting "Allow log on through Remote D