Hi8 Cam doesn't play my tape thru canopus...

Hello all,
Yes, yet another question from Benny P. My project I am working on now required me to get the Canopus ADVC product. The project I am doing is being done at different locations. It's a high school video that was shot by one of the parents, who obviousily wasn't up to date with technolog. It was shot in Angalog video (WHY?!?!?!?). So I buy this Canopus ADVC-110 and have previous tapes that play thru the camera I'm using. I'm using a Sony, and the tapes I'm trying to capture from were shot from a different camera.
I did this same video last year, when I hadn't been relocated, and I used the parent's camera who shot the games with. This camera is a rare (or atleast I've never seen anything like it before) Analog camera. It has a FireWire port and I used it last year to capture from using the FireWire iLink port it supports in FCP.
I get the tapes this year, playing them on a different camera from which they were shot in. I insert them into my capture camera and I get a fuzzy screen with black and white grains. Tried playing the tape thoroughly and there is not video. I am positive the video was recorded and was played back previously (at least that's what I was told).
So I'm going crazy right now. I feel like the converter I bought was a waste and is not useful. So, I'm wondering if there's anything else I could do to capture without the camera.
I was thinking buy a VHS tape that you can insert the analog tape in and you can play it with a VCR. Is there anyway I could use this to capture?
This is really confusing. This is first project I've had so much trouble with, (WHICH IS CLEARLY CAUSED BY TRYING TO EDIT ANALOG FOOTAGE!), as I usually edit in SD and HD footage.
If you could pass on any advice or ideas for me that would be amazing right now. Lost post I know.
Thanks so much,
-benny

Benny,
As Studio X has already alluded to, there are three video formats that use 8mm tape; 8mm (aka Video8), Hi8 (aka High Band 8mm), and Digital8 (DV25 format - the same format as used with DV/DVCam/DVCPro)). 8mm and Hi8 are analog video formats, while Digital8 is, naturally, a digital video format. A Digital8 camcorder can record a Digital8 signal to Hi8 tape. The tape itself is neither analog or digital - its a metal particle (or metal evaporated) tape formulation. It's the type of signal that was recorded to tape that determines if the recording is digital or analog.
Since the camcorder does have a Firewire (aka iLink, IEEE1394) connection, it is obviously a Digital8 camcorder. Digital8 camcorders can playback Digital8, Hi8 and regular 8mm video. They can record a Digital8 signal to Hi8 tape.
There is NO known 8mm-to-VHS adapter. Perhaps you're thinking of the VHS-C-to-VHS adapters which are/were available just about everywhere.
-DH

Similar Messages

HT201401 My camera doesn't open when tapping the camera icon, its a black screen. I can only open it by turning off at the top, then instead of 'sliding' to unlock, I need to slide up the camera picture. This opens the function and I can take pics as no

The only way I can get the camera to work is by turning the phone off at the top, then instead of 'sliding to open' I slide the camera picture up the screen. This opens the normal camera and I can take pictures. What have I altered, and how can I reset it so I can tap the icon?

Try force closing the Camera app, followed by resetting your phone. Double=tap the home button, locate Camera in the list at the bottom, tap and hold it until it wiggles, tap to close it, tap the home button. Now reset your phone by holding the on/off and home buttons at the same time until you see the Apple logo, then release.

OneStep rewinds tape but doesn't play

I have a Sony DSR-1500a and wanted to use OneStep to mindlessly archive a bunch of stuff. The program correctly asks for a blank DVD, rewinds the tape but never gets the deck to play. If I notice it in time I can manually hit play and the process works thereafter. Otherwise iDVD either aborts the process or, worse, captures 10 seconds of a freeze frame and then proceeds to waste a DVD-R

Sony DSR-1500a
Is that a MiniDV tape camcorder?
Le,
It doesn't appear to be a camera - it's DVCAM Compact
Player/Recorder deck that's well out of MY price
range.
It's penny-wise/pound-foolish to use your delicate camcorder for playing back tapes... at least if you do this for a living!
G5 2gig dualie + 667 TiBook

TS3274 My IPAD 2 camera doesn't seem to work. It doesn't want to go thru and seems to be on "hold".

My IPAD 2 camera doesn't seem to work. It doesn't want to go thru and seems to be on "hold".

By 'hold' do you mean frozen or the shutter doesn't open ? Have you tried closing the Camera app completely and seeing if it works when you re-open the Camera app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camer app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Hi guys , when I tap a song on my iPod touch it plays the wrong song and sometimes it comes up with the now playing screen but no matter how many times I press play it doesn't play ,what's wrong with my ipod

When I play a song on my iPod it immediately skips a song and sometimes doesn't play any song at all

- Try a reset. It cvures many ills.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync and then resync the music
- Restore from backup
- Restore to factory defaults/new iPod.

Canon mini Disk camera doesn't work if external drive connected

A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago. Both "live" video and from the recorded mini cassette tape. Then all of a sudden not one of the software recognized my camera anymore. I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. I checked my Sony WX-5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the USB connection.
The problem started like this.
I was downloading a file. Had to work for an hour and when I came back upstairs. I noticed that the screen was frozen.   So, I shut the Mac down. And when I started it again, well nothing happened except for a grey screen. A half~sized cursor was stuck up in the top left. But, my mouse also had a cursor which was movable.
It wouldn't even recognize the OSX Install Disk holding down "C" or "Option". Only starting with "Shift" held down, "Safe Boot" could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express they still couldn't recognize my camera. I had been using the Canon FV M10 camera for a few years with both external hard drives on. There were never any problems until just before I sent it into the shop.
There was only one way to use my camera. Un-Plug the external HD6. Then the camera functions fine. but remember I had been using this camera with both HD's for around two years without any problems.
Notes on symptoms: and what actions I took.
Front connections: FW400 Canon camera. FW800 (Tried connecting HD6)
Rear Connections: USB2 1) MidiMan 2 x2   2) mouse 3) Canon Printer
                               FW400 HD5 FW800 (tried HD6)
With HD6 Connected.
iMovie 11 9.02 : Start iMovie O.K. No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie.
2nd start: Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
iMovie shows (not responding) When I turn off the camera. (not responding) disappears and iMovie is working again. But, "No Camera Connected" shows again. Quit!
Un-Plugged (Ejected) HD6.
When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.
"No Camera Connected" I Quit iMovie.
Re-start iMovie: Camera on… Live video and record miniDV tape can both be seen.
Skype: Both live video and mini DV tape recording even plays back over Skype screen.
iChat (same as Skype) O.K.
Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00 (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
The call to Apple Tokyo today.
Just talked to Apple (Mac) Tokyo about my computer problem. Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and here is the basic problem.
I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few years (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives. And Apple said that it's a 3-party problem. (different makers etc.) But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac) to the board.
When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6 all of them work fine. The camera "live" or the camera playing back the mini DV tape video.
Wouldn't this be a problem between the connections (front & back) to the new video board? Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help! thanks

+My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Please help: My iPOD just runs through the playlist. Doesn't play anything.

My iPOD just runs through the playlist. Doesn't play anything. The songs do exist physically on the device.
I tried updating the iPOD but still the problem was not solved.
Is there any way by which I can play the songs without downloading them again on iPOD?
Windows XP Pro

I just had the same exact problem. It's like the Nano was forwarding thru the songs by itself..nothing would play!
So I went and looked at the manual, which suggested I try resetting it first. I did, and it worked! Here's what I did:
The manual instructed me to turn the "hold" switch on & off. Then it said to hold down the Menu and center button at the same time, until the Apple logo appeared. Then in a few moments the main screen came back on...and I was able to play songs again.
Hope this works for you, good luck!
Dell 2400 Windows XP

Most of the .mov and .AVI files doesn't play anymore with QT 7 or 10

I'm running OS 10.7.5 and most of the .mov files that were generated with Quicktime 7 doesn't play anymore, except in VLC.
I used QT7 because it can still crop and edit videos, instead of QT 10 that came with the system.
QT7 has a also a very nice feature that allow to reset the image ratio, which is sometime very usefull.
I shall say that videos came from a digital recorder I used to tape the TV and those files came as .AVI
Anyway, overnight (probably after an update of iTunes or any part of the system) QT 7 nor 10 can play those files anymore !
Each time I try to open a file with QT it says I need a codec, and leads to the DIVX download page, but installing this codec doesn't solve my problem.
QT7 was a very fine software and worked until now.
Why an update makes my system go backward ??!?
I'm a huge fan of Apple, but that is not acceptable !!!
It just makes me want to purchase on older mac and go back to 10.6 !!!
Shame on you Apple !

Indeed, a further search on the side lead me to this page :
http://perian.org/
and now it works again !
I still don't get how an update could change the system like this.
Anyway, thanks for the reply

Optura 20 and iMovie 10.0.6---camera doesn't mount

My daughter recorded a video for her class and needs to edit it. I have used my Optura 20 and successfully transferred video to the iMac but not in the last few years.
Currently running Yosemite and iMovie 10.0.6 on a mid-2011 iMac.
When I plug the camera directly into the firewire port, iMovie does not see it. When I go to "system information" and look at the Firewire bus, I see the warning "Unable to list FireWire devices." When I remove the camera and plug in my firewire HD, it appears quite nicely in System information; when I plug the camera into the drive to "daisy-chain" the system info reverts to "unable to list" and the hard drive disappears from my desktop.
This is using the (only) Firewire cable I have for the camera, which is 9 pin to 3 pin.
I went to my ancient mac mini (running OS 10.4) but that ancient beast has only a 6 pin outlet on the back.
Before I run out and try to find a 6--->3 cable, does anyone have any insight? Does this camera never work on a modern mac with a modern OS? Is the problem I am having likely to also show up on the Ancient Mini? My fallback position is to go to a camera store and have the miniDV converted to a digital file (and I would like to do this the old-fashioned way if at all possible).
Any thoughts?

Hi
NO CAMERA or A/D-box
Cable
Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
Test another FW-Cable very often the problem maker.
Camera
Test Your Camera on another Mac so that DV-in still works OK
Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
Some Cameras has a Menu where You must select DV-out to get it to work
Camera connected to "charger" (mains adaptor) - not just on battery
Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
Is the dip-switches set right ?
Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
Try resetting it
Connections
Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones after material is imported and edited.
GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
Does Your Mac have a FireWire Port
White MacBooks - don't
MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
if Thunderbolt - use a Thunderbolt to FireWire adaptor.
else - NO SOLUTION
Only option as I get it is either
Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
FileVault is off ? (hopefully)
Screen Saver - OFF
Energy Saver - OFF
Using WHAT versions ? .
Mac OS - X.5.4 ?
QuickTime version ? (This is the heart in both iMovie and FinalCut)
iMovie’08 (7.1.?), 09 or 11 ?
iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
FileVault - Secure that it’s turned off
Network storage - DOESN’T WORK
Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
USB hard disk
Network storage
File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Front camera doesn't work! Battery dies super fast!

Hello! I received my ipod touch 5th generation as a bday gift in November 2012 and I'm having a couple of issues with it. First the battery dies really fast. I have wifi on all the time and I dunno if this is the issue, but using music playback for about 4-5 hrs/day and reading/instagram/fb/WWF for like 1-2 hrs, it lasts about 15 - 20 hrs. I think there has to be a problem because my touch 3rd gen lasted longer basically doing the same thing. And if I play a video for <1hr, the battery lasts less than 12 hrs. That's one thing. Also, a couple of times both the front and back camera have frozen up, and for about a week now, the front camera doesn't work. When I switch to it, it closes up as if it's taking a picture, but it never opens up again, it just stays there. This is for video and camera. The front one just doesnt work. PLEASE HELP! I'm obssesed with this thing and I'm really disappointed by these features. I dunno what to do. And the worst is that after I try to switch to the front camera, I can't switch back. I have to restart the ipod to be able to use the back camera, because it just doesn't do anything.

For the camera problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
The battery life you are getting is normal and expected. If you have a concern after doing the above make an appointment at the Genius Bar.

Video camera doesn't work after ios7... Update! This *****!

***? Updated to iOS 7, video doesn't work when I use camera ap!

Nice one, Apple. Swipe to change between camera and video and disable tapping on the word "video" because tapping makes sense and is easy enough for even a 5 year old to understand. Don't be Microsoft and make things harder to use. Keep the swipe if it satisfies your sense of feeling all modern and relevant, but put back the tap on "camera" and "video" so we don't have to Google it to figure it out and leave irate notes in your product forums. Missed a really cute video of my toddler singing thanks to you.

Hi guys,my iphon 4 doesn't play most of the

Hi guys!
My iphone 4 doesn't play most of the music what are in the music library on the pc,what is syncronized by iTunes.this problem came with iOS 5.,but previously the phone had different other issues,so it has never worked as it promised by Apple.I have tryed every solution what I saw on the communiti forums,but nothing works permanently,the solutions are only temporary.I went many times to the Apple store to fix the problems but they could not solve the problems.They gave me a replacement handset,which solved the fast battery drain issue,so the hardware seems OK!!!! To be an iphone owner is a struggeling, I always recive different bugs from Apple,like other iphone users.This behaving made the Apple different fom the others,as they wanted.Job done! That is why I ended up at Nokia N8,because it plays every single tune what are in same music library what used by iTunes, no lugs,no skips, no mess up,it has FM radio,free sat-nav,12Mp brilliant camera,working bluethoot,no need online connection for everithing! I find the solution for the iphone problems,this way my iphone turned to a secondary phone,I will use as an emergency phone ,this is not a smartphone!

Got it replaced last week. Turns out the dock was defective.

IPad 2 brand new camera doesn't "open"

Hi everyone
Just bought my iPad 2 today and what a surprise, the camera doesn't work
Front camera it's ok. The problem is with the one in the back. It doesn't open.
I've done a little research on the web and I can see this is a very common problem. ¿What can i do?
greetings from
Coacalco
Estado de México
México

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Camera doesn't work in FaceTime

When Face-timing, my camera doesn't work (I have no image of myself). The box is there, but it is always black (i.e., the person I am face-timing can't see me).
The camera works fine outside of FaceTime.
I just reset the IPod touch and now the camera on the opposite side of the screen works, but not the screen side. Also, the Non Screen side camera tends to freeze.
Thoughts?
IPod Touch iOS 8.1.2
Thanks for any help.
M

I do not know what you mean by reset. Try the following if you have not done so already:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi8 Cam doesn't play my tape thru canopus...

Similar Messages

Maybe you are looking for