Hi8 video to DVD

I read on a post somewhere that the solution to conversion could be as simple as a new DV camera, FW enhanced. What is FW enhanced--does that simply mean with a fire wire connection? I purchased a converter recently, and it seems to be working ok, but if only another $100 or so would get me a new video camera and convert my video tapes, then I am certainly not opposed to returning it. Any suggestions as to a lower end ($200-$350) model that works reasonably well and will do the conversion job?
iMac Mac OS X (10.4.3)

Any Sony Mini DV with RCA jacks or a Sony D8 would be my suggestion.
Here is a list

Similar Messages

How can I get Hi8 video captured in NTSC Standard, to display as 4:3 when DVD is played on TV?

I have been capturing Hi8 tapes of our family, using a Sony analog-to-digital converter and Adobe Premier 10's NTSC Standard (4:3) preset. However, when I use Premiere Elements 10 to burn the digital files to DVDs and then play them on a Sony DVD player and Bravia flat-panel TV, the video is distorted in width automatically by the Wide Zoom mode. The TV cannot be configured to display the frames in the Normal Mode because the resolution is 720p, so the images cannot be viewed with the original 4:3 frame aspect ratio.
After much experimentation, I tried capturing a tape in the NTSC Wide (16:9) preset. When I started to burn the AVI file to a DVD, I got a warning that I was using the wrong format, and the choice to correct the format. I chose NO, and then burned the DVD. To my surprise, it did display on the TV without horizontal stretch, and the images did not appear to have been noticeably degraded.
I would very much appreciate knowing if there is some way for me to go back now and have Premiere Elements 10 somehow reformat all of the Hi8 tapes I captured using the NTSC Standard preset, so that I don't have to recapture them, but can simply reformat them and burn them to DVD's that can be displayed on the TV without being distorted?

Thanks for replying Steve. I've been using a Sony DVMC-DA2, an analog-to- digital media converter which I was advised is used by people converting media professionally. I've been using an S-Video cable to connect it to my Sony Hi8 video camera (Model CCD-TR101), which was considered to be a high-end camera, back in the day (1992). The converter is connected to my Windows 7 computer with an IEEE 1394, "FireWire" cable. I'm not sure how I would check the format into which the Hi8 video is being converted, but I've followed the Adobe Premiere 10 Video Tutorial and configured the capture preset to the NTSC Standard (4:3), which is the one recommended for DV cameras. I couldn't find any advice specifically explaining how to configure the preset when converting analog Hi8 to digital.
In the Premiere Elements 10 editing software itself, the video images burned on a DVD are not distorted, and the quality of the video images during editing looks to be every bit as good as the camera could record.
When I started showing the DVD's to my family, however, I was very disappointed to discover that everything looked stretched in the horizontal direction. I have since studied the configuring of frame aspect ratio modes (Normal, Zoom, Wide Zoom and Full) described in the Sony Bravia TV's instruction manual, in detail. And, I have tried every conceivable combination of the picture and frame settings to see if I could "unstretch' the video images. No, luck. It was then that I came across a footnote that indicated that the Normal mode was not available for video resolutions of 720p, 1080 and higher. Unfortunately, the NTSC Standard preset indicates that it does capture DV in images that have 720 horizontal pixels by 480 vertical pixels.
When I view the Hi8 burned to DVD's on other computers, using Windows Media Player and Video Lan, they are not distorted. In fact, they look so good that I'm just about ready to dedicate my laptop as the DVD player for my TV set! It was while contemplating whether there might be a way to avoid doing this, that it occured to me to try capturing some Hi8 tape using the NTSC Wide Screen preset option. My half-formed idea was that, since the ratio of pixel width to pixel height in the Standard preset was smaller than with the Widescreen preset, using the latter to capture an analog video image might either (1) expand the width of the overall image much farther, and cause grotesque distortion, or (2) squash the width of the overall image, so that it looked normal. I can't pretend to have known what I was doing, since I don't understand video recording technology, but it also occured to me that the Widescreen preset might degrade the resolution, so that it was somehow no longer 720p, and thereby possibly circumvent the Sony lockout of the Normal Mode for these DVD's. Whatever it did, capturing Hi8 video with the NTSC Widescreen preset did, indeed, reduce the width of the frames appearing on the TV Screen, so that they apperared normal.
The question with which I'm now wrestling is whether to go back and re-capture all of the Hi8 tapes, with the NTSC Widescreen preset, that I had already captured with the NTSC Standard preset - a big job. The warning window that popped-up when I prepared to burn the test video captured with the Widescreen preset gave me the option of correcting my "mistaken" choice of capture preset. I declined, and was rewarded with an undistorted video image. Which raises the possibility that, somewhere in Premiere Elements 10, there may be the capability of invoking that same pop-up window and modifying what the software considers to be the "correct," Standard preset to the Widescreen preset,so that I can change the formatting for all of the HI8 tapes I've already captured, so that they can be burned to DVD's and viewed in their proper frame aspect ration.
This has been a long-winded follow-up to your initial answer to my question, but I would very much appreciate any further suggestions.
Many thanks. Paul

Transferring Hi8 video to iMovie to DVD

Contrary to the popular mythology that using Mac's is intuitive, mine is missing the simple single icon in iMovie "Convert Hi8 video to iMovie and then to DVD". I could hope that there would be one simple action to perform that function but having worked with computer programmers for years I know they don't think that way. I have jumped through a myriad of flaming hoops trying to convert an hour-long Hi8 video tape from my Sony digital camera to our new iMac computer and then saving it to a DVD (hopefully a DVD+R because I have a warehouse full of them). However, after numerous attempts and using our brand new Maran Illustrated user manual (whose listed icons don't match those actually found on our machine)and trial and error (with error exceeding success) I have been able to load the video onto my hard drive but can't yet burn it to a DVD. I have reached the point where a baseball bat through the monitor seems appropriate for reducing my stress and frustration. Thus to prevent a sizable casualty loss could someone please advise me of a simple, straightforward description of the steps necessary to perform the process described above. Then as soon as I can locate my missing iDVD icon from the pop-up bar at the bottom of my screen I can proceed with preserving my cherished old videos.
Sincerely,
A PC User Not Yet Convinced of the Ease of iMac Use

Hello, rocky,
Welcome to the discussions! Karsten is correct...you are a good writer!
It should not be that difficult to accomplish what you wish. Some have directly imported the Hi8 video into iMovie from their Hi8 digital camcorders. However, if yours is not digital, you will need to first capture it to DV tape and then import that into iMovie. If you already have the video in your computer, do you mean that the clips are in iMovie?
If so, you can easily view, edit, title, add music etc to your new iMovie. You can make chapter markers to create scenes in iDVD. When you are satisfied with your movie, just save it and close iMovie. Open iDVD (if the icon is missing from the dock, go to your Applications folder and find it. You can drag it into the dock again if you wish). Find the Media tab and look for 'Movies.' Your movie should be visible there looking similar to the iMovie icon. Drag your movie onto the iDVD screen. Automatically, your movie will load and you will see its title, and the options of 'Play Movie' and 'Scene Selection' (if you have made chapter markers; you won't have this option if you have not). You can customize your iDVD project with themes, changing the titles, adding photos, etc. Save whatever you like and when you are done, save the project as a disk image. That will begin the process that looks as if it is burning the DVD, but will actually create an image for you. Specify it to be saved to the desktop, or wherever you wish. You can then burn your disks from the disk image using 'Disk Utility' (found in your Utilities folder).
As far as the type of disk to use, iDVD 6 can burn to + or -, but most of us recommend DVD-R for best burning. Also, the type of media can make a big difference. Verbatim is one of the best.
Post back if you have more problems or if what I have written is not so clear...after all, it is 2am here Much better than bashing your monitor...it is not the monitor's fault....!

Solutions to importing VHS and Hi8 video to iMovie6?

I would like to import into my G4 tower with OS10.5 my old VHS and Hi8 videos for editing in iMovie 06. I've tried creating a DVD first but iMovie doesn't recognize it from the internal DVD player or as a file. I tried shareware Rippers but not able to import the results into iMovie.
I've looked at the PYRO Analog/DV Mac Video Capture - In & Out device at $210. This looks like it may be the only thing that works. It converts any signal to DV and then connects via Firewire to the computer. Thus I assume is readable by iMovie and may even create clips at the appropriate places.
What solutions have you found that work? Ease of use is nice but not essential. Modest price would also be nice but what do I have to do to make this work. I anticipate having additional Hi8 tapes in the future to edit then make into DVDs as well as what I have now. All help appreciated. Thanks, Ken

Check out the Canopus AVDC110 digital video converter. http://www.canopus.com/products/ADVC110/index.php?lang=EN

Downloading Hi8 video

Hi there,
I have an old Sony Video Hi8 Handycam, Model CCD-TRV58. What do I need to download/transfer my Hi8 videos onto my MacBook? I am hoping I do not need a special converter box.
Thanks!

There's a more fundamental challenge. The MacBook does not have a FireWire port, so none of the AV-DV converters is going to be usable.
You could use and Elgato EyeTV250Plus to capture the video from your camcorder (it's USB based, not FireWire). This will be fine for viewing or burning the video to DVD. It's not particularly useful if you want to edit your video, however (due to the format/codec the EyeTV converts video to). But for viewing you will be happy with the quality.

Burning a video to DVD that will default to opening at actual size.

Hi. I am burning a widescreen (16:9) SD video to dvd using DVD Studio Pro 4. The video has been exported from FCP6 using compressor. The quality is fine and the aspect ratio has been retained for viewing (letterboxed) on a 4:3 CRT and also on a widescreen display. Is there any way, through encoding, that I can force the video, by default, to open at actual size on a widescreen computer display rather than full screen? I realize that the viewer can exit from fullscreen mode and select "actual size" in DVD Player, but if possible, I would like the video to begin playing at actual size without any adjustments having to be made. My concern is that some viewers will not bother to exit fullscreen mode and will view the video at a size not supported by its resolution. It's a video of a photographer's stills and at a display size larger than actual size, the sharpness of the images is compromised. Any way to get around this other than adding some text advising the viewer to watch the video at actual size or redoing the whole thing in HD?

Not possible. There's nothing in the DVD Video specification that provides for this.
There are settings available in the Preferences menu for Apples's DVD Player that can be set to do this, but no way to put information on a disc that will override those settings.

Importing Sony DVDirect Video on DVD into FCE

Hello...good wishes,
I've been recording video from a Canon XL2 directly to DVD using a Sony VRD-VC20 DVDirect DVD Burner. When I try to import this video material into Final Cut Express, FCE does not recognize the format.
Apple Support says that the XL2 Camcorder is a supported device in FCE, but is not able to be conclusive regarding video recorded to DVD using the Sony DVDirect Burner.
The only way I've found to get any of this video into FCE is to play the DVD's in a standard DVD player' record the video back onto DV tape, and import them through the XL2. This is a daunting, funky proposition given the hours and hours of video I need to edit - and I worry about degradation of quality using this process.
Are there any third party drivers written out there or do any of you have ideas how I can get this video from DVD to FCE?
Thanks~

I use a Sony VRD-VC20 to burn Tivo recordings and VHS tapes to DVD. I just picked up a program called Cinematize2. It's a DVD clip extractor that retails for about $50 US. It allows you to set an in and out point on a DVD and extract the clip into a format compatible with FCP/FCE. Previously I used MPEG Streamclip 1.3.1 which allows you to export mpeg2 files to Quicktime, AVI, or DV format for use in FCP/FCE. Mpeg Streamclip also allows you to set in and out points before exporting. The link to download MPEG Streamclip 1.5.1 is: http://www.alfanet.it/squared5/mpegstreamclip.html.
In order to use the MPEG2 playback and converter feature you will also need the QuickTime MPEG-2 Playback Component. You can buy it from Apple (www.apple.com/quicktime/mpeg2) for about $30 US. If you have either Final Cut Pro or DVD Studio Pro, then the component is already installed and you don't have to buy it; but you may need to download the latest version from Apple (www.apple.com/quicktime/mpeg2/download).

How to fit video to DVD-5?

Hi: I have been reading the faqs and forums, and pulling info from a variety of sources, but I am still confussed about how to fit my video to a DVd-5 using Encore. I have previsouly made DVds using Encore 1 & 2.0, so I know the process. But those were smaller projects under 1 hour running time. My current project is approaching 100 minutes for the main feature with small extras, and some basic menus.
I have read that I should be able to fit 110-130 minutes max on a DVD-5. I have also read to realistically expect something closer to 60-75 minutes. Which is it?
My footage is sport oriented so their is movement and & action, lots of transitions, & some composting.
Can someone tell me how do I fit 100 minutes to DVD-5, if that is possible?
I am editing my feature in PPro 1.5. I export 5-10 minute segments as DV AVI files, and then color adjust etc in AE 7.0., which I have been saving as Microsoft DV. I was planning on final assembly of all segments in AE 7.0, & export the whole feature from AE 7.0 as Microsfot DV. But I think this makes my feature file too big and it won;t fit to DVD-5. Is there another codec I should be using for final output to Encore?
What if I assembled in PPro 1.5 and exported to AE for final color. Is there a different codec I should be using to help it fit later on?
Also, I usually leave Encore set to automatic transcode and let it figure whats best. Should I be picking soemthing different?
Thanks and sorry if this has been cover before

Wondershare Video to DVD Burner is fast video-editing and DVD-authoring software. In just five steps, easily convert and burn all popular video files directly into DVD movies so that you can watch them on TV. It offers a wealth of tools for more hands-on editing, including video trimming, producing your own soundtracks, menu templates and in addition to apply fancy transition effects between clips, which help users produce professional-looking movies and play them on almost any DVD player.
Just download it at http://www.oursdownload.com/video-to-dvd.html

Recording from a video to DVD on my Qosmio

I have a qosmio G10. does anyone know how you can transfer your old videos onto dvd. i am confused about how to connect the video player to the notebook and which programme i should attempt to record in. thanks!

> I have a qosmio G10. does anyone know how you can
> transfer your old videos onto dvd. i am confused about
> how to connect the video player to the notebook and
> which programme i should attempt to record in. thanks!
Extremely easy. INstall "WinDVD Creator 2 Platinum for Toshiba" that is on the "Additional Tools & Program" CDs that was provided with your Qosmio.
After installation, reboot. Once you take control again, apply this patch (double click the .ref files)
http://support.toshiba-tro.de/tools/updates/windvd-creator-reg/regpatch-xp-na.zip
Now open winDVD Creator 2 and from then on you will figure all out by yourself. (you can select if you want to record from tv, composite or svhs). It will record in .mpg (MPEG2) format, ready to burn on DVD.
Later,
Alcahest

Hi8 Video Capture

I'm trying to capture Hi8 video in my Macbook Pro 17 (OS 10.5.8). I have connected my Hi8 tape deck
(which does not have time code) to the Macbook Pro via an ADVC100 analog to DV convertor..
When I open the Final Cut Express capture window color bars appear in the preview area with an overlaying
black bar containing the words "Preview Disabled" even with the tape deck running or in pause. Clicking on "NOW"
in the capture window simply brings up a black window rather than showing video coming out of the Hi8 deck as
seen on another monitor.
If I have the Hi8 deck in Pause and click the "NOW' button followed by unpausing the deck "a split second later" then
video capture does take place. Waiting longer than a split second does not work.Getting this timing just right is very
difficult, and usually takes several attempts. Clicking "NOW' after unpausing the deck also does not work.
Any suggestions about enabling the preview window so that I don't have to use this trial and error approach to capturing
Hi8 video?

Are you using the DV Convert capture setting in FCE? And as you've discovered, the tape must be playing when you hit the NOW button - not the other way around.
-DH

I want to transfer my VHS-C videos to DVD.

I want to transfer my VHS-C videos to DVD using my I MAC (Mid-2011). I have the camcorder (Panasonic PV-IQ305) to use. I also have a VHS player I can use.

Does the Panasonic camcorder have the play thru capability? If it does you can connect the camcorder to your Mac with a FW cable, put in a tape, launch iMovie and play the tape in the camcorder to import it into iMovie. If the camera does not have play thru see if you can find one that does. Then connect your VHS player to the camera and the camera to your iMac.
Otherwise you'll need to use a converter like the Canopus converters. They are not inexpensive but do an excellent job. I used the ADVC-100 model to convert all of my VHS videos to digital and then burn to iDVD. There are undoubtly other converters on the market that do the same function. The Canopus is the only one I've seen discussed in this community.
If you could borrow a camcorder with pass thru you could save a few $$$.
OT

FX5600U 128 VTD Video to DVD

OK I finally installed the Video capture drivers properly for this card (ie the ones not including a TV Tuner driver) and everything seems to have gone in ok with no more errors.
I want to transfer loads of old home video to DVD but I feel as though I'm groping around in the dark. What do I need now? I've got Nero DVD burning s/w and a DVD-R writer I assume I need some software to capture the video in, manipulate it then write it to DVD. Can someone point me to good, esy to use (cheap) s/w that does this. Am I right in assuming the Audio out from the VCR is connected to Line in of the sound card and Vout is connected to Vin of the FX5600.
Help please.
Phil S

is there a solution? i have the same problem
$ mencoder /path/to/file -alang ger -ovc frameno -of rawaudio -srate 48000 -channels 2 / -oac lavc -lavcopts acodec=ac3:abitrate=128 -o ger_audio.ac3
MEncoder SVN-r36285-4.8.0 (C) 2000-2013 MPlayer Team
205 audio & 424 video codecs
success: format: 0 data: 0x0 - 0x13dafefd
libavformat version 55.7.100 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (dca), -aid 0, -alang ger
[lavf] stream 2: audio (dca), -aid 1, -alang ger
[lavf] stream 3: subtitle (subrip), -sid 0, -slang ger
VIDEO: [H264] 1280x720 0bpp 25.000 fps 0.0 kbps ( 0.0 kbyte/s)
[V] filefmt:44 fourcc:0x34363248 size:1280x720 fps:25.000 ftime:=0.0400
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
libavcodec version 55.12.100 (internal)
AUDIO: 48000 Hz, 2 ch, floatle, 1536.0 kbit/50.00% (ratio: 192000->384000)
Selected audio codec: [ffdca] afm: ffmpeg (FFmpeg DTS)
==========================================================================
Ignoring video stream!
Unsupported AVSampleFormat 8
Unsupported AVSampleFormat 8
Audio encoder requires unknown or unsupported input format
Exiting...
Last edited by kriz (2013-06-19 10:08:42)

Hrd Drive Full- Archive iTunes Videos to DVD?

My daughter has filled up her laptop's hard drive. The big culprits are movies and TV shows purchased from iTunes. Is there a way that these files can be taken off her hard drive and archived to a DVD? She's not watching the files now and is OK if they come off her iPod, but doesn't want to erase something she paid for in case she might want them at some later date.
Is this possible? If so can someone point me to directions on how to archive these to DVD and how to restore to the hard drive at a later date?
Thanks!

Hi L Powow- thanks for responding to my question. That's not quite what I had in mind. I don't want to back up the entire library, I only want to back up select iTunes video purchases for archival purposes.
I would like to remove the iTunes video purchases from the iTunes library on the computer's hard drive, because they take up too much space and they are not being currently used on the iPod.
I want to know how I can back-up only purchased videos to DVD, so that if I remove them from the library on the PC's hard drive and if, at a future date, there is a requirement to load the videos back onto to the iTunes library, I will be able to restore the videos from a DVD to the iTunes library on the PC hard drive.
Any suggestions on a backup and restore procedure to do this? Thanks.

Have recorded old videos to DVD, want to import (copy) to my imac to use in a project

I have copied old home videos to DVDs and want to copy (import) portions of a couple to mu mac to use in a slide show/video. Was not able to import at all. Uses DVD+R and finalized. The mac did not see the non finalized dvd. I could even use a work around. Just need a couple of clips.
Thanks

Greetings,
If these are video DVDs (you put them in a set top DVD player and they play on the TV) then you'll need some extra software to convert them, as in their present form they cannot be edited.
Apple does not make such software but there are other companies that do.
You can convert your DVDs to a usable form using a variety of programs. Some examples:
Free: http://handbrake.fr/downloads.php
Paid: http://www.roxio.com/enu/products/popcorn/standard/overview.html
NOTE: Neither of these examples will convert copyright protected DVDs as that is illegal (mostly). If the DVDs you are trying to use were created with copyright protection, the afore mentioned programs will be unable to convert them.
Cheers.

Burning Video to DVD or VCD

Is it possible to export/burn downloaded videos to DVD for viewing on a standard DVD player. I would like to watch TV episodes on my TV without having to connect it to the iMac (if that would even work.)

Unfortunately not. The DRM on the videos you buy from the iTunes Store does not allow this. You may burn the videos to Data disc.

Hi8 video to DVD

Similar Messages

Maybe you are looking for