Hibernate and standby

Hello
i have the same proble as john from yesterday he solved the problem by installing new device drivers itried this but it does not solve the problem can anybody help?
I have a T61 thinkpad with XP SP2. we had to reformat awhile back. I've since reloaded all the power mgmt drivers from Lenovo's page but  when I go into the power manager, it won't let me enable 'hibernate'. Any ideas why this might be?
Guy

In addition to installing power management drivers, try checking to see if the laptop has updated video drivers and system drivers which match your T61.
try the command utility:
powercfg -a
to see if hibernation/standby is currently supported.  If not then you may need to install drivers.
then:
powercfg -h ON
to enable hibernation if it is supported w/the drivers that you have.
You may need to install a few more T61 drivers in order to get it to support the power modes.

Similar Messages

  • M70-160: won't wake up from hibernate or standby - software or hardware?

    I just got maaaaaan!!
    works fine, but won't wake up from hibernate or standbye !! unless yur gonna wait for awhile!! 15min or something like that!!
    After that it will wake and work normally !
    I thought it's overheating problem but now just power it on and when the toshiba logo appear if you turn it off, it won't power on again, but after 15min it WILL !!!
    so it's not a heating problem !!
    It does that even without HD on it !!
    at first it was hibernate and standby problem, now it dose the same with shutdown !!
    what can I do!!
    i just bought it guys !! ASP is to far a way !!
    is there anyway i can do to fix it !!
    i do fix PCs alot but not notebooks !!

    thank you for your help and the fast replay, i really really appreciate it.
    I'll explain the problem in details, right after hibernate or standby IF you press power button the led goes blue, fan starts, HD led lights, battery led, power adapter led (if its connected), and cd player make sound as if it looking for a CD, and THEN fan stopped, HD led goes off, no sound of CD, leaves u only with power button led ON, a nice frustrating Blue
    after waiting, u eventually gave up, turn it off by along press on power button, and then no matter wut u do, simply won't start only same sounds and leds as mentioned previously, nothing on the screen as if its dead !! no logo no nothing.
    give it a time ( about 15min with battery connected, or 5min or less with battery out) Press the power Button, THERE U GO, works perfectly !!
    same case with shutdown but not always as hibernate and standby (though once it did wakeup from standby!!), but most of the time after shutdown u have to wait 15min!!
    no USB flash memory connected or anything else !
    i did install winXP pro SP2 on it and installed the drivers and Microsoft HOT fixes also, but problem remains.
    i also did recovery from the recovery CD that comes with it, also no good !!
    i noticed that if u disconnected the battery the unit needs shorter time to be able to wake up or boot. about 5 min.
    wut kills me is that the unit works perfectly and i like it !!! i only got this issue with it !!
    so wut i need to know is this: Is there anyway to make sure weather if its a software problem or a hardware problem?
    its not easy to go to the local service cuz its in another city!! i need to try first wutever it takes to fix it on my own!
    thank you for your time!

  • What is the diffrence between ' Contolfile ' and ' Standby Controlfile' ???

    Hi Guru's,
    Can someone please help me out with the diffrences between a 'Control File' and 'Standby Controlfile'.
    Thanks in advance
    Regards,
    Girish

    Kind of reply you can always expect from Sybrand...anyways...the controlfile of any production database would always be having a bit in itself which identifies a database as a primary or a standby database, so whenever you try to query select database_role from v$database; for any production database it would always give output as PRIMARY and for a standby it would always give output as PHYSICAL STANDBY..Hope it clears your doubts
    Regards,
    Ajinkya

  • No data in Usage and Standby?

    Hi,
    I have recently exchanged my white 16GB iphone at the local retail store, but have just noticed that since I exchanged it there does not seem to be any Usage figures in the general settings.
    By that I mean the "usage" and "standby" are blank, above the message "usage times will be shown after iphone is fully charged".
    To try and correct it, I reset the phone yesterday and it was on charge from 10pm last night to 7am this morning so I would have thought would be fully charged. (the battery meter appears to be fully charged)
    Is anyone else experiencing this problem or has any advice on how to correct it?
    Thanks for your help.

    When adding/creating an email account, the following presets are available.
    Exchange
    MobileMe
    Gmail
    Yahoo Mail
    AOL
    If you selected the Yahoo Mail account preset when adding/creating the account, the account was created as an IMAP account with Push access available for received messages along with an option to enable or disable Push access for the account.
    The data required to connect with the incoming mail server for an email account to check the incoming mail server for new messages is minute. More battery will be used the more often an account is checked for new messages, but this alone is not a significant battery drain and especially with a single email account. All server stored mailboxes with an IMAP account are not synchronized with the server when the account is checked for new messages. For example, the account's server stored Sent mailbox is not synchronized with the server until the account's Sent mailbox is selected.
    Push is not a constant fetch process. With an account that supports Push access for received messages, a new message received at the incoming mail server is "pushed" to the iPhone without the account having to be checked for new messages. In theory, Push access should use less battery compared to automatically checking the account for new messages, which isn't always the case and this also depends on the time interval set for automatically checking for new messages. You can have the account automatically checked for new messages every hour.
    Depending on how much data is accessed compared to the number and length of phone calls when roaming internationally, data access can be much more expensive.

  • IPad unresponsive after iOS 8.02 update, doesn't show up in iTunes, hardware reset (home and standby buttons both held down for ten seconds) not working

    I have a 32GB iPad mini that was purchased new in June of this year. A little while ago, I started the iOS 8.02 download while it was plugged into a wall socket using an official apple wall to USB plug and an official apple thunderbolt cable. I then left for 25 minutes to get some food.
    On coming back, I discovered the iPad with a black screen showing the apple logo. I thought this was just an ordinary part of the update, it was restarting or something after installation, so I thought nothing of it. Then, after another minute or two, the screen flashed blue and then went completely black.
    Puzzled, I waited for another second and the apple logo reappeared as if the iPad was restarting again. However, after a few minutes, this happened again. This has been going on for the last half an hour, and I was wondering has anybody experienced this before.
    As I stated in the title, it won't show up in iTunes, and the hardware reset or whatever it's called doesn't work. Also, bear in mind I had issues syncing it with iTunes the night before and it also seemed to crash a few times last night, restarting the iPad and bringing it to the blank screen with the apple logo for a few seconds before going to the lock screen. That didn't happen at all this morning though.
    The iPad is not jailbroken, however, it does have licenses for gba4iOS, which is still installed on it, and a VPN license installed on it by the Hola app, which I deleted but never bothered deleting the license for. Any help would be greatly appreciated.

    Hi Colin how are you?
    I updated my IPAD yesterday and have the exact same problem.
    Itunes does not recognize my ipad. Home and standby also doesnt work.
    Also have the blue thing every few minutes and the apple logo but it never goes beyond it.
    Have you solved the issue?
    IPAD AIR

  • Standby database(11g) was still in sync after stopping the primary and standby database listener.

    Hello !!!
    I have noticed that my standby database(11g) was still in sync after stopping the primary and standby database listener.
    If this is the case then how log is transferring from primary to standby ? it is not using listener service ? kindly clarify

    Read this Metalink Note:407040.1

  • Sync config between active and standby CSM

    Is there a way to sync config between active and standby CSMs? Just as one that in CSS.
    How about two SSL Service module in two different 6500 chassis?
    Thanks.

    HI,
    there is right now no command to commit redundancy between two CSM-Modules. Maybe in the future there will be one. Okay in regards of sync the only way is to check for redundancy is the show mod csm x ft command. But be aware that some slight differences like a real not being in service are sometimes not recognized.
    In regards of the SSLModule there is no way as far as I know to sync them. This won't be present in the future in my opinion as there are certificates which require a password or something like that and one won't be able to do redundncy without those passwords. So In my opinion no way to sync two SSL-Module because of security issues.
    Kind regards,
    Joerg

  • Satellite P - How to disable hibernation and standby?

    I have set power configuration to say Never for both Hibernation and Standby - both occur.
    What am I doing wrong?
    I would be happy with Standby but do NOT want Hibernation!

    Hi p g allison,
    Did you set these settings for current power profile?
    For example if you disable standby and hibernation for High Performance power profile but you are using or switch to Balanced the settings dont work.
    So check if they are disabled in all power profiles!!!

  • Require 9i Primary and Standby redo logs files same size?

    Hi,
    We have 9.2.0.6 Oracle RAC (2 node) and configured data guard (physical standby).
    I want to increase redo log files size, but i can't this do same time primary and standby side.
    Is there a rule, primary and standby database instances have same size redo log files?
    If I increase only primary redo log files, is there any side effect? However I try this issue on test system. I increased all primary redo log files(if status='INACTIVE' drop redo log group and add redo log group, switch logfile,...)
    , but i couldn't changed standby side. So the system is work well. Is this correct solution or not? How can i increase both sides redo log files?
    Thank you for helps..

    Thank you for your helps.. I found this issue answer:
    http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14239/manage_ps.htm#i1010448
    Consequently, when you add or drop an online redo log file at the primary site, it is important that you synchronize the changes in the standby database by following these steps:
    If Redo Apply is running, you must cancel Redo Apply before you can change the log files.
    If the STANDBY_FILE_MANAGEMENT initialization parameter is set to AUTO, change the value to MANUAL.
    Add or drop an online redo log file:
    To add an online redo log file, use a SQL statement such as this:
    SQL> ALTER DATABASE ADD LOGFILE '/disk1/oracle/oradata/payroll/prmy3.log' SIZE 100M;
    To drop an online redo log file, use a SQL statement such as this:
    SQL> ALTER DATABASE DROP LOGFILE '/disk1/oracle/oradata/payroll/prmy3.log';
    Repeat the statement you used in Step 3 on each standby database.
    Restore the STANDBY_FILE_MANAGEMENT initialization parameter and the Redo Apply options to their original states.
    bye..

  • The file structure online redo log, archived redo log and standby redo log

    I have read some Oracle documentation for file structure and settings in Data Guard environment. But I still have some doubts. What is the best file structure or settings in Oracle 10.2.0.4 on UNIX for a data guard environment with 4 primary databases and 4 physical standby databases. Based on Oracle documents, there are 3 redo logs. They are: online redo logs, archived redo logs and standby redo logs. The basic settings are:
    1. Online redo logs --- This redo log must be on Primary database and logical standby database. But it is not necessary to be on physical standby database because physical standby is not open. It doesn't generate redo log. However, if don't set up online redo log on physical standby, when primary failover and switch standby as primary. How can standby perform without online redo logs? In my standby databases, online redo logs have been set up.
    2. Archived redo logs --- It is obviously that primary database, logical and physical standby database all need to have this log file being set up. Primary use it to archive log files and ship to standby. Standby use it to receive data from archived log and apply to database.
    3. Standby redo logs --- In the document, it says A standby redo log is similar to an online redo log, except that a standby redo log is used to store redo data received from another database. A standby redo log is required if you want to implement: The maximum protection and maximum availability levels of data protection and Real-time apply as well as Cascaded destinations. So it seems that this standby redo log only should be set up on standby database, not on primary database. Am my understanding correct? Because I review current redo log settings on my environment, I have found that Standby redo log directory and files have been set up on both primary and standby databases. I would like to get more information and education from experts. What is the best setting or structure on primary and standby database?

    FZheng:
    Thanks for your input. It is clear that we need 3 type of redo logs on both databases. You answer my question.
    But I have another one. In oracle ducument, it says If you have configured a standby redo log on one or more standby databases in the configuration, ensure the size of the current standby redo log file on each standby database exactly matches the size of the current online redo log file on the primary database. It says: At log switch time, if there are no available standby redo log files that match the size of the new current online redo log file on the primary database. The primary database will shut down
    My current one data gurard envirnment setting is: On primary DB, online redo log group size is 512M and standby redo log group size is 500M. On the standby DB, online redo log group size is 500M and standby redo log group size is 750M.
    This was setup by someone I don't know. Is this setting OK? or I should change Standby Redo Log on standby DB to 512M to exactly meatch with redo log size on primary?
    Edited by: 853153 on Jun 22, 2011 9:42 AM

  • Resizing online and standby redo log in dataguard setup.

    In 10gr2 dataguard i would like to increase redo logsize from 50M to 100M.
    on primary
    standby_file_management=manual
    added online redo groups with 100M
    log switched
    drop old one and readded with 100m
    deleted log added in step2.
    same for standby redo logs.
    On standby
    was able to resize standby redo logs.
    but cannot resize online redologs status is clearing or clearing_current.
    please comment. thanks.

    I assume you just had to wait until the Primary switched out of that online log so it became inactive at the standby as well? We track where the Primary is by marking the online redo log files at the standby as clearing_current so you can tell where the primary was at any given moment.
    Make sure you create new standby redo log files at the Primary and Standby to match the new online redo log file size.
    Larry

  • Dataguard lost both Primary redo log and standby redo log files

    Hi,
    I am new to data guard, i came acorss a scenario where we loose both primary redo log file and standby redo log files.
    Can someone please help me understand how to recover from this situation.
    Thanks!

    >loose both primary redo log file and standby redo log files
    We have to be very clear.
    There are (set A) online redo log files  and (set B) standby redo log files at (location 1) Primary and (location 2) Standby.
    The standby redo log files, depending on the configuration, aren't strictly mandatory.  The standby can be applying redo without online redo log files present as well, depending on how it was setup.
    So, the question is  : Did you lose online redo log files at the primary ?  Didn't the primary shutdown itself then ? If so, you have to do an incomplete recovery at the primary OR switch over to the standby (which may or may not have received the last transaction, depending on how it was configured and operating)   OR restore from the standby (again, with possible loss of transactions) to the primary.
    Hemant K Chitale

  • Sequence of stopping starting Primary and standby DB

    Hi,
    what are the sequence of stopping starting Primary and standby DB ?
    To stop, which one ,primary or Standby, should be stopped first ?
    To Start which one first ?
    Thank you.

    Hi,
    what about the 10gR2 logical standbys? When I read the Note:278643.1 to apply the patch for logical database, it seemed that the sequence to stop and start the primary/logical standby was to stop the logical standby first before the stop of the primary one. Please advise me, for a simple situation just to stop and start the primary/logical standby to support a Unix server bounce, what is the sequence we should follow ? Do we have to run some commands to stop/start the SQL apply?
    Any idea or suggestion will be greatly appreciated.
    Thank you very much,
    yKe

  • Can I have a primary database and standby database with a different windows version?

    Hi
    I need your help.
    We need to increase the memory in the server where is the standby database , but first, we need to upgrade the windows version.
    The actual version is windows 2003 standard edition 64 bits
    The new version will be windows 2003 enterprise  edition 64 bits
    This difference in windows version  between primary and standby servers can cause a problem in the synchronization between primary and standby databases ??
    What do you recommend? Have both servers in the same windows version?
    The databases are in SQL SERVER 2005.
    Thanks.
    Loreinn

    This difference in windows version  between primary and standby servers can cause a problem in the synchronization between primary
    and standby databases ??<o:p></o:p>
    There is no issue with database synchronization as long as SQL Server is of same version.<o:p></o:p>
    What do you recommend? Have both servers in the same windows version?<o:p></o:p>
    OS(Windows version) has no restriction for using SQL server 2005 database mirroring/log shipping. You can go with upgrade without any worries on SQL
    database side.<o:p></o:p>

  • Oracle data guard configuration for primary and standby db_name

    I am working on configuring an active data guard for one primary DB and one standby DB. I have a few questions:
    1. Can I use different db_name, db_unique_name and instance_name for primary and standby. For example: primary(db_name, db_unique_name and instance_name)=chicago. When I create standby DB with Rman backup and copy of pfile and control file from primary DB or use Grid control to create standby database. Oracle document or Grid control all keep standby db_name=chicago. Only make standby db_unique_name and instance_name=boston. Due to my application system condition, I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?
    2. In primary datafiles, application system generate datafile name like this: hr_chicago_01.dbf, fn_chicago_01.dbf. When I move datafiles to standby server, if I plan to use db_name=boston for standby DB, can I rename datafiles as
    hr_boston_01.dbf, fn_boston_01.dbf? In this way, datafile name match up with db_name. but I will create standby log group and members on primary and standby identically. If in future switching over, DB will not have problems.
    3. If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standby. Then "alter database backup controlfile to trace" from promary and also " create pfile='/xxx/initSTANDBY.ora' from primary. Then modify init.ora and controlfile. Then run control.sql to bring standby DB up. After that, configure redo log shipping and apply with data guard or SQL. Is this a acceptable way to create physical standby DB?
    Please advise your comments. Thanks in advance.

    I want to make db_name=boston, not keep it as the same as primary=chicago. Is this valid configuration?NO. DB_NAME must be the same ("chicago") at both sites. The Standby will be using a different DB_UNIQUE_NAME (e.g. "boston") and can be using a different Instance name / SID (e.g. "boston").
    can I rename datafiles Yes. The database file names can be changed.
    If I don't use primary DB backup. Instead, I copy all datafiles, redo_log files (no control files) to standbyWhat is the difference between the first sentence (a backup of the primary) and the second sentence (a copy of the primary) ? A Copy is a backup.
    Are you intending to differentiate between an RMAN Backup and a User-Managed (aka "scripted") backup ?
    Normally, for DataGuard, tou can use non-RMAN methods to copy the database but there's no value add in this.
    You'd still have to setup DataGuard ! (and I wonder if you'd have complications setting up Active DataGuard).
    But remember that you MUST create the Standby controlfile from the Primary and copy it over to your Standby -- particularly as you are planning to use DataGuard. This is not created by 'alter database backup controlfile to trace' , but by 'ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'filename''
    Hemant K Chitale

Maybe you are looking for