Hibernate button greyed out after Windows XP reinstallation

I recently reinstalled Windows XP in my M35X, one thing Ive noticed is that the hibernate button (which was perfectly functional before) has greyed out and I dont have that option anymore. Any help? Thanx

Hendry,
First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

Similar Messages

  • Daq Solutions Button Greyed out after reinstall

    Problem: Purchased new NI PCI board (not sure the # now) and it came with NI-Daq 7.2 with it. I went to install it and found out it doesn't install with Windows95. Not that big of deal, needed to upgrade anyway. So, I installed a newer Pentium3 with Windows 2000 and installed all the drivers for the 2 PCI boards we use. Then I installed Labview 6i. After that I tried to install NI-Daq 7.2 and found out Labview installs an older version so I removed Labview completely, Installed NI-Daq 7.2, then reinstalled Labview 6i without the older NI-Daq verion that comes with it. Now when I load up Labview the "Daq Solutions" button is greyed out. I completely uninstalled NI-Daq and Labview again, reinstalled just labview with its olde
    r (6.8) version of NI-Daq and still have the same problem. I searched here and didn't see any other solutions to this problem other than reinstall the software. I have done that 4 times now to no avail. Any other help?

    Hendry,
    First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

  • Call Button Greyed Out After A Third Participant Is Added to The Conversation in Office Communicator 2007 R2

    Hi there,
    I have a problem with the office communicator. I'm able to make a call to one party without any problems. The issue occurs when I add two or more parties into the conversation. The call button will be greyed out and Im unable to make a call. 
    I've uninstalled and reinstalled the OCS but the problem still persists.
    Appreciate if anybody could help.
    Regards,
    Vinod

    Agree with Anthony.<o:p></o:p>
    You can check that by initialing a audio meeting.Then check if the call button grays out.<o:p></o:p>
    Lisa Zheng
    TechNet Community Support

  • 3D Option Greyed out after windows upgrade?

    Pretty much as the title says. I had windows 7 and photoshop was just fine i could 3d from extrusion layer no problems, but then i upgraded my operating system but nothing else in my cpu so everything is the same. But now i cant click choose any 3d options whats wrong?

    Make sure Photoshop Preferences tab GPU is enabled and advance  mode is what you used. Please post your System infouse Photoshop menu Help>system info. Use its copy button and paste in here.

  • After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window.  The save button greys out.  Solutions anyone?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
    This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
    If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Agent email help - buttons greyed out at one location

    The setup:  Two call centers.  One in NC and one in CA.
    The one in NC, which is where the call center servers are, has no issues with email buttons becoming active.
    The one in CA, every morning when the agents login the email buttons will not become active unless the users do the following workaround
    Start agent.
    Run and IE url that was given to me by Cisco.  http://<ipaddress of ccx server/EemUi/index.jsp?port=59015
    This will force Java to start and have the java icon appear in the system tray.
    Email buttons become active
    Close IE window (which make email buttons grey out again)
    close and restart agent
    Email buttons work.
    I only have this issue in the CA office.
    I had them ship a desktop to me in the NC office.  I connected it and did NOT have an issue.  Everything works perfectly here.
    Is the issue tied to the distance?  Is there some java time out setting I can tweek to make this work.
    I didn't have this problem with 8.5 su 2.... it happened after the update to su 3
    Anyone seen this?  Cisco has no answer.

    I bounced this around the office to get some ideas.  One question - how long is the CA office waiting for the email buttons to become active?  That is, setting the workaround aside, if they wait long enough, do the Agent E-Mail buttons ever become active?    The thinking is that could be a factor as the entire applet is around 40 MB. If connection speed isn't great it could take a while to download which would explain the scenario.
    Tom

  • Submit Button Greyed Out (v 4.0.5)

    I have been using Compressor successfully for about a year.  Recently it updated to v4.0.5.   Now I am not able to submit, with the final Submit button greyed out.  I have checked my Destination folder permissions and all appear correct.
    What could be the cause of this, and what shall I do?  I need to render a program urgently for broadcast.
    Thanks
    Geoff

    I just resolved a similar problem.  I am running OSX 10.6.8 on a MBP 13" 2010.
    Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
    I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder.  This did not fix the problem on its own.
    They then had me delete the Apple Qmaster folder from user>library>application support.  This did not fix the problem on it's own.
    I then reinstalled the Compressor application itself.  This did not fix the problem on its own.
    I then verified permissions and repaired permissions using disk utility.  This did not fix the problem on it's own.
    I then clicked on "Share Monitor" which is found on the Compressor task bar.  "This Computer" was displayed in the left column.  I simply clicked on it in order to high light it.  I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
    YMMV.

  • Firefox 8 and 9beta. Back and Forward buttons greyed out. Right click menu also has forward and back greyed out. Updated all plugins, then disabled all plugins and extensions and started in safe mode. No change.

    My forward and back buttons are greyed out after update to Firefox 8. Tried to move to 9 beta, but same behavior. Back and Forward also greyed out in right click menu.
    Attempted to fix by updating all plugins and extensions, then disabled all plugins and extensions, and then tried to start in safe mode. Nothing worked.

    You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

  • Itunes showing all data as other and sync button greyed out

    Itunes showing all data as other and sync button greyed out.  I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
    When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens.  Then the greyed out "sync" button just appears again.
    Anyone with some advise please?

    Try Restarting or Resetting your touch.
    Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
    Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
    Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
    If neither works, then Restore your touch through iTunes.

  • My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    My wi-fi button greyd out after iOS 6.1 update. Any sugestions to solve this problem?

    IOS: Wi-Fi or Bluetooth settings greyed out or dim.
    http://support.apple.com/kb/TS1559

  • All options are greyed out after i Click on Apply Maitenance

    Hi All,
    I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
    Kindly help me out.
    Find the screenshots at my blog.
    http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
    Regards,
    AS

    From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
    Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
    Are you definitely sure the environment has had nothing applied to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Put, Get , Connection buttons greyed out

    Hi All,
    I am pretty new to Dreamweaver but not to web development. I
    have set up and connected a few sites from my own PC. It all goes
    just like it says in the manuals.
    But I got called into a client site who have an existing site
    set up in Dreamweaver. The DW person left and the current person
    wanted some coaching. Well the Code, Split, Design views all came
    up and we could edit just fine.
    But over on the right, above the list of files, all the
    buttons (put, get, connection etc.) were greyed out. At first I
    assumed the FTP connection was not set up, but it was, because when
    we saved files, they saved straight to the live site.
    So I went over to look at Site / Manage Sites. The FTP
    connection was listed, but many of the other options (all the
    categories within Advanced) did not seem to be available. They were
    not just grayed out - I could not even see the list of them.
    I have been fiddling around at home on my own sites, trying
    to figure out how to recreate this and I can't. I can figure out
    how to put myself onto live updating (update to remote FTP on Save)
    but I don't get the other buttons greyed out just because I am
    working like this.
    Any ideas? I'd like to be able to go back there, take them
    off live updates and restore the buttons.
    Thanks
    Abigail

    Unless one is working in ColdFusion, or has special
    requirements, the FTP &
    RDS server option should never be used.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Alan" <[email protected]> wrote in
    message
    news:C4F834C6.30E30D%[email protected]..
    >A guess- they set this up as an "RDS" ftp site, and it is
    editing the live
    > files on the server.
    >
    > To make a regular ftp site connection, make a New site.
    > If it's CS3 version, make sure you pick "site" and not
    "RDS"
    > Enter all the details, and make a "regular" ftp
    connection, not an RDS
    > connection.
    >
    > --
    > Alan
    > Adobe Community Expert, dreamweaver
    >
    >
    http://www.adobe.com/communities/experts/
    >
    >
    >

  • Please god . deactivate this product. Your troubleshooters dont work, cannot deactivate. I am using RETAIL, adobe acrobat xi.Connected to internet. On for over 20 min. Open to deactivate greyed out. Windows 7 x64 pro. This crap makes people want to use fr

    Please god . deactivate this product. Your troubleshooters dont work, cannot deactivate. I am using RETAIL, adobe acrobat xi.Connected to internet. On for over 20 min. Open to deactivate greyed out. Windows 7 x64 pro. This crap makes people want to use fraud. I just want it OFF do i can USE it on another COMPUTER.
    can anyone in customer support deactivate this??

    Hi Terry,
    I have checked the serial number and found that you have sufficient activation count left to install it on 2 computers.
    Please uninstall the software and activate it on the other machine. In case of issues please let me know and I will help you.
    Here is my direct email: [email protected]
    Chat Support email:
    http://helpx.adobe.com/x-productkb/global/service1.html
    Regards,
    Rave

  • Project pane greys out after adding either HD movie footage or a photo'

    Project pane greys out after adding either HD movie footage or a photo' into iMovie '08. Since using a HD camcorder, quite often, after adding either HD movie footage or a photo', the project pane greys out. I have to exit the project and re-enter to continue viewing the project; this is tiresome. Any thoughts or is this yet another iMovie '08 bug?

    blackcomb greens wrote:
    PS ~ what is the plist?
    every app as a preference list, which can get corrupted.
    quit iM
    look in user/Library/Preferences for a file called com.apple.iMovie(x).plist (x stands for any number) ....
    trash that.
    restart iMovie..
    it doesn't hurt your projects nor does it touch any files.. it just 'resets' an app.. => slapp on backhead.. as I like to call it..
    yes, hardware is nice, as long as you don't dare to handle AVCHD .. that is on Intel Mac only..
    all Folders (Project/Events) is on local harddrive?
    no plug-ins installed (DivX etc)?

  • Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work

    Why is my diabled login greyed out after i unlock it? I have tried to remove the library file but it doesn't work. It worked the first time and than all of a sudden it was greyed out.

    Where do you see a disabled login? In system preferences? In Login screen?

Maybe you are looking for