Hibernate does not work

Hi all,
I have enabled hybernate option of my Laptop, but when I try to do that, screen goes black and finger print sensor start to blink, I can hear HDD and Fan voice easily, meaning it is not in hibernate mode. Is there any way to fix this error. The reason I'd like to have hibernation is that my system start to work from standby automatically, so I like to prevent that by hibernation.
Thanks,
Saridar

Restore default Power Settings.
Open a command prompt.
In the command prompt, type powercfg -restoredefaultschemes and press Enter.
Close the command prompt.
2. Update the BIOS, graphics and chipset driver (if available).
3. Make sure that no additional device or wireless keyboard/mouse is connected.
4. Enable the Hibernate mode again.
5. check the results.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Similar Messages

Sleep and Hibernate does not work after BIOS update X1 Carbon 20A8

As subject title, did a recent Lenovo "System Update" on BIOS and other drivers, and since then sleep and hibernate no longer works, when i close the lid, it turns on by itself after 2 seconds.
When i select Sleep or Hibernate in Windows 8.1 with lid open, it just behaves like a Restart command.
Need this fixed! Any ideas?

Try downgrading to your older BIOS and see if it works again.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Hibernate Does Not Work after SSD Upgrade

I cloned my stock 500GB drive to a 512 GB Crucial SSD. Unlike the stock drive, I did not duplicate the rescue and recovery partition (~12 GB). Although the computer runs very well indeed, the hibernate function no longer works. Instead the display goes dark, the HD light goes on, but any touch of the keys or keypad immediately brings the computer back to where it was left. Any ideas whats wrong? I also cloned my X201 HD to an SSD, but there the hibernate function continues to function just fine.

Hi Marco,
The Product Availability Matrix will answer your question: https://websmp106.sap-ag.de/pam.
Cheers,
Jonathan

Satellite A110-228 LAN does not work after hibernate

Well, subject says it all, really. The LAN (wired) network does not work after hibernate.
It seems it cannot find the DHCP server, so after a while it gets a 169.* address.
After a reboot, the network functions as usual (gets a IP address from the DHCP server)
Tried the usual things, disconnecting the cable, disabling the LAN device, battery or AC adapter, the behavior is reproducible.
The wireless network will be restored after a hibernate.
It needs a little help though (right click on the icon and "recover" or whatever it is called in English)
Any suggestions?
Wilm Boerhout

Hi guys
In the Toshiba HW setup which is placed in the control panel the options Wake-up on LAN and Built-in LAN should be enabled.
I think the options are disabled by default.
Furthermore the default setting for Wake on Settings is OS controlled. To use the Wake-up on LAN function under power off mode, in the device driver for the network card under the menu point Wake On Settings the Value Wake on Magic & Directed must be set.
Please check this how to enable WOL (first time use):
1. Go to [Start] -> [Control Panel] -> [Toshiba HWSetup] -> [LAN] tab
2. Enable Wake-up on LAN
3. Click [Apply]. System will request to reboot.
4. After the reboot go to [Start] -> [Control Panel] -> select [System]
5. On system properties dialog box select [Hardware] tab -> click [Device manager]
6. On Device manager dialog box select [Networking adapters] -> double click [Intel(R) PRO/100 VE Network Connection]
7. Go to [Advanced] tab -> select [Wake On Settings] property -> Select [Wake on Magic & Directed]
8. Press [OK] to close the dialog box.

[SOLVED} Suspend to ram does not work (with sleep, s2ram, pm-utils)

Hi.
I would like to ask for one thing: i can't suspend to ram or resume from suspend to ram.
I treid to check over www in order to find some help, some solutions, and how to fix that. Unfortunately, i found these:
https://forums.opensuse.org/showthread. … 13-2/page2
https://bugzilla.opensuse.org/show_bug.cgi?id=913105
https://forums.opensuse.org/showthread. … S-13-1-x64
Bug 91921 - WD 2TB Caviar black causes hard lock on resume S2RAM
https://bugzilla.kernel.org/show_bug.cgi?id=91921
In fact, when i was researching of this problem i wanted to check if my graphic card and memory are failing so a did few changes (removed memory stick and so one) but in doing this i removed almost all of my hard disk drives because i didn't want to hurt them with many reboots or resets.
What did i find? It is strange, kernel version is not important because i checked most of them.
I removed 2x2TB Seagate F14 series along with 4x3TB WD Green. Then i checked s2ram, it went to suspend, and resumes correctly. Everything works. I put it to sleep with s2ram -f -a 1. Works
I attached my 4x3TB WD Green drives. I put computer to sleep with s2ram...it causes hard lock, black screen, i could do only poweroff by powerbutton. s2ram -f -a 1 causes freez. Sometimes, but not constantly, s2ram -f -a 3 -p is being able to suspend...(mostly it does a freez, hard lock computer) but sometimes it is able to put it to a sleep, but resume just freezes everyting - no blinking cursor, no blinking num lock led and so on.
I know that you would suggest me to check logs - this is the main problem. Logs for pm-suspend works when i suspend or resume without WD drives attached. When i have them connected, i'm not able to check pm-logs because computer hangs, freezes and logs are not being stored/writed to pm-suspend.log and pm-powersave.log.
Could somebody help? Point me to a solution? I can't check logs because there are not any when freezing occurs. I checked openSuse thread and many others and for other systems there were some kernel fixex, patches.
They wrote that WD blacks are at fault because they don't have APM. Well, in fact my WD Green have APM with very aggresive factory settings: they park heads over 8 seconds not being used. I disabled it in firmware but disabling it is not the point and not the problem. People have the same problem even with APM and parking heads on other WD drives, i found it that some have it with WD Red's drives and even with very old 320GB WD Blue series - what is more funny, i have 640GB AAKS blue from WD and with this drive i can suspend or resume - APM on this drive is also unavilable, like in Green series because i changed it with wdidle with prebootable cd. I can't supend or resume with 3TB WD Greens.
BTW - suspend to disk, with pm-utils and uswsusp works ok, in 100% every time. (i had to add "shutdown method = shutdown" to /etc/suspend.conf from uswsusp package).
On Windows machine it works. Can suspend, can resume, can hibernate.
Last edited by firekage (2015-03-07 03:27:28)

Hm, sometimes i found myself astonished because some things just does not work at all on one machine, while the other one has no problem at all. I was trying to find why suspend to ram won't work at all...and while i was searching i found one topic that was leading to upower dbus. Similar problem with upower i found, by coincidence, on Manjaro forum.
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
this command above returns all the time:
Error org.freedesktop.DBus.Error.UnknownMethod: Method "Suspend" with signature "" on interface "org.freedesktop.UPower" doesn't exist
I tried this:
sudo systemctl enable acpid.service
sudo systemctl --system daemon-reload
sudo systemctl restart systemd-logind
As soon as i enabled and started acpid.service...my supend to ram, from kde, works like a charm, without graphic problem, or freezing.
There is few question: why on my desktop suspend doesen't work out of the box, when even archwiki says it should? Why on my netbook machine (Acer AOD270) that has the same package installed it works out of the box? Why on my desktop machine acpid.service was not enabled, was not started and was not running while on the notebook it does?
Anyway...i fixed it by a big coincidence because on Fedora forum somebody has problem with suspend to ram with nvidia GTX750 and this card was new like my card (GTX660). He posted the same problem with upower that i posted in quotes and because of this i found another thing on Manjaro forum and that was it!
BTW - this problem, i now think, is not related to my WD drives because it works with them. I think that there was another one ugly thing that broke my suspend to ram ability - bios of my motherboard (so called uefi bios with support for old one) has no option for S1-S5 stated (like the previous motherboards had) and only have ASPM...and ASPM is in my opinion broken but i will try to veryfi it one again later.
Last edited by firekage (2015-03-07 03:29:20)

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

A2109 tablet autorotate does not work

The autorotation on my recently purchased tablet A2109 does not work. I look in settings and the auto rotate field is not highlighted, I therefore cannot choose to turn it on.The tablet has the Android jellybean OS and I did update it but to no avail. Can anyone help?
Thanks
Solved!
Go to Solution.

Dear tdsouza
Welcome in lenovo forums
just a clarification , do you mean option Rotate is dimmed in setting
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

1.      Are you getting any error message?
2.      Which browser are you using?
3.      Were there any recent changes made on the computer prior to the issue?

My flash player does not work on my tablet.

My flash player does not work on my tablet

Your tablet uses Android OS.
There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player. Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both free in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.

Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
If I'm in the wrong place, please do warn me.
The documentation says:
Direct Insertion
Insert the jpg, gif, or png image directly in your template.
...This works obviously
URL Reference
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{'http://image location'}
For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
Element Reference from XML File
1. Insert a dummy image in your template.
2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
url:{IMAGE_LOCATION}
where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
...This, however, does not work.
I use Apex' report query tool and My query is like
select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
Regards
PS: My BI version: 10.1.3.4.1

Hi Oeren,
your steps seem basically to be correct. I have a tutorial how to do this here (in german)
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
referencing seem to be OK.
Here are two thought - the issue might be one of these ...
How did you insert the dummy image into the word document - did you do it via "insert" or
via "link to file". "Link to File" does not work - you must choose the simple "insert".
Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
Does this help ..?
Regards
-Carsten
Cloud Computing mit APEX umsetzen. Jetzt!
http://tinyurl.com/apexcloudde
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

"HP laserjet professional utility" does not work in osx 10 (Yosemite)

All the major functions of this printer work fine in Yosemite, but not the "HP laserjet professional utility"The driver shown in System Preferences/Printer for my Laserjet P1606dn is version 6.9 (I am unable to knowif this is the version provided by the latest HP printer update, which was installed via the App Store.) I note this exact issue was raised for OSX7 in November 2014, but for a diiferent model printer. My printer is on my local wifi network, and that earlier case seemed to invove a direct USB connection. The solution offered in that thread, 4694464,may not be applicable now, so I seek advice In the panel for my 1606dn within System Preferences/Printer offers a button to launch the "HP Professional Utility", but when clicked an app launches called the "HP Professional Utility" but then nothing. I am trying to access the printer controls that will keep it from turning itself off when idle, and the documentation says the "HP Professional Utility" will allow that change. Please advise

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Hibernate does not work

Similar Messages

Maybe you are looking for